Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.4 LAccepted-AOC 695 NEAR ANJALI CLINIC SHIV PALACE SHANTI VIHAR BADAUN ROAD SUBHASH NAGAR BAREILLY 243001 UP | BAREILLY | BAREILLY | UP | 243001 | L1 | Accepted-AOC Over all rates are reasonable and lowest. | |
| 2 | L2₹25.5 L+₹1.6 L (6.76%)Rejected-Finance 113 SURESH SHARMA NAGAR NEAR S S V ENTER COLLEGE BAREILLY 243001 | BAREILLY | UTTAR PRADESH | 243001 | L2 | Rejected-Finance Over all rates are higher than L-1. |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
1 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST BAREILLY
GE WEST BAREILLY
MISC REPAIR WORKS FOR THE AREA IN ZONE II AND III UNDER AGE B/R - II AT GE (W) BAREILLY.
2023_MES_607355_1
8141/C/E8
Open Tender
Civil Works
Item Rate
270 days
GE WEST BAREILLY
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE WEST BAREILLY
₹56,000
Yes
13 Sept 2023
30 Jun 2023
3 Aug 2023
30 Jun 2023
1 Aug 2023
15 Jul 2023
Amount
Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.
M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.
M & L for glazed ceramic coloured tiles 450 mm X 300 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles and dismantling of wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough and dismantling of floor tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles and dismantling of wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough and dismantling of floor tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles and dismantling of wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
S & F of 16-18 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M & L for 18-20 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite mirror finish over and including 10 mm thick cement screed in cement mortar 1:4 and dismantling of stone slab, hearth or wall tiling / terrazo including cement mortar bedding complete all as specified and directed.
M & L for rubber moulded 60 mm thick, M-35 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over and including 25 mm thick sand cushioning, filling of joints with sand and taking out existing old unserviceable one complete all as specified and directed.
M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement including taking down existing defective plaster complete all as specified and directed.
M & L for rendering 15 mm thick cement plaster in cement mortar 1:4 including mixing of water proofing compound as per manufacturer’s instructions on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including taking down existing defective plaster complete all as specified and directed. NOTE: - WATER PROOFING COMPOUND SHALL BE MEASURED AND PAID SEPARATELY AS SUPPLY ONLY.
M & L for rendering 5 mm thick cement plaster on cement concrete surfaces of ceiling and chajja with cement mortar 1:3 finished even and fair with and including taking down existing defective cement plaster complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified. MAKE- Dr. Fixit of pidilite or equivalent.
M & L for preparation of old decorated surfaces of walls including applying 2 mm thick wall care putty and one coat of distemper oil emulsion complete all as specified and directed.
M & L for preparation of newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of triple layer constructions, white in colour and hoisted, fixed in position with and including dismantling of existing water tank any capacity complete all as specified and directed. Make- Sintex pure, Vectus smart and Supreme white.
S & F of 1000 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of triple layer constructions, white in colour and hoisted, fixed in position with and including dismantling of existing water tank any capacity complete all as specified and directed. Make- Sintex pure, Vectus smart and Supreme white.
S & F in repairs 15 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 142 gram) complete all as specified and directed.
S & F in repairs 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.
S & F in repairs 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F of 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors including taking up or down old unserviecable one complete all as specified and directed.
S & F of 20 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors including taking up or down old unserviecable one complete all as specified and directed.
Taking up or down 15 mm bore steel water tubing and connections and re-fixing the same in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed.
Taking up or down 20 mm bore steel water tubing and connections and re-fixing the same in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed.
S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white including fixing bolts and making connection to flushing cistern, flush pipe etc. complete all as specified and directed.
S & F in repairs vitreous china wash down water closet, snow white, single piece with UF seat cover, hinges, fixing accessories, cistern fittings, overall size 685 x 365 x 745 mm, S trap 300 mm including connection to drain pipe etc. complete all as specified and directed. MAKE- CERA CIMONA- S1013122 or equivalent in Jaquar / Hindware.
S & F in repairs plastic seat cover suitable for water closet pedestal pan, white, closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices complete all as specified and directed.
S & F in repairs vitreous china water closet squatting pan ‘Orissa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including suitable size trap and lean concrete as required complete all as specified and directed.
S & F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32 mm dia PVC waste pipe suitable for low level cistern, L type, brackets fixed on wall complete all as specified and directed.
S & F in repairs vitreous china wash basin white flat back 550 mm X 400 mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed.
S & F in repairs vitreous china counter top wash basin snow white oval shaped size 600 mm x 400 mm including PVC waste pipe, PVC connection 450 mm long, 32 mm bore CP waste coupling, chain & plug, brackets etc. as required complete all as specified and directed. MAKE- Jaquar CAT No. SLS-WHT 6601 or equivalent in Cera / Hindware.
S & F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.
S & F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.
S & F in repairs 15 mm bore fancy type, chromium plated stop valve / angle valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repairs 15 mm bore bib tap, chromium plated fancy type, long body with wall flange as per Cat. Part No. FUS 29037 of Jaquar, G2304A1 of Parryware, F1014151 of Cera quarter turn type complete all as specified and directed.
S & F in repairs 15 mm bore bib tap, chromium plated fancy type, long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 100 mm size fancy type brass chromium plated shower rose with or with out swivel joint including shower arm 195 mm long with bend of 45 degree and flange, fixing to steel pipe or union complete all as specified and directed.
S & F in repairs Chromium plated ABS body hand shower (health faucet) alongwith 1.25 metre long flexible PVC tube and ABS wall hook suitable for EWC complete all as specified and directed.
S & F in repairs PVC corner set of three of size (12'X12", 9"X9" and 6"X6") with railling complete all as specified and directed.
S & F in repairs 450 mm long in repairs PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.
S & F of stainless steel (AE-SI 316 grade) tubular towel ring as per Cat. Part No. ACN 1121N of Jaquar, T/6002A1 of Parryware, F5002105 of Cera including a pair of CP brass bracket complete all as specified and directed.
S & F in repairs water jet for EWC chromium plated with PVC connection pipe complete all as specified and directed.
S & F in repairs 15 mm size pillar tap of PTMT, any colour high pressure screwed for iron pipes (minimum weight 110 gram) complete all as specified and directed.
S & F in repairs 15 mm size bib tap standard of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.
S & F in repairs PVC waste pipe 32 mm dia 750 to 800 mm long fixed to waste fitting of wash basin or kitchen including socket suitable for waste fitting complete all as specified and directed.
S & F in repairs 1.00 m long PVC door seal suitable for fixing to wooden door shutters, fixed with screw or nails complete all as specifed and directed.
S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including dismantling of old unserviceable one complete all as specified and directed.
S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including dismantling of old unserviceable one complete all as specified and directed.
S & F of 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S & F of 110 mm size PVC (SWR) WC connector with lip ring complete all as specified and directed.
S & F of 75 mm bore PVC (SWR) bend any radius provided with oval access door complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) junction single, (Single ‘T’) equal or unequal complete all as specified and directed.
S & F of 1 mm thick stainless steel sink with drainage board kitchen or laboratory type with plug washer and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size of sink 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm complete all as specified and directed.
S & F in repairs plate rack made out of 1 mm thick stainless steel sheet of size 75 cm X 90 cm X 25 cm with all internal fittings (as per sample) complete all as specified and directed.
S & F in repairs chromiumm plated heavy duty extension piece 15 mm bore and 25 mm long complete all as specified and directed.
S & F in repairs chromium plated toilet paper stand as per sample kept with Engineer- in-charge complete all as specified and directed.
S & F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories complete all as specified and directed.
S & F in repairs vitreous china urinal bowl type, flat back, white 465 x 355 x 265 mm with grating, union for discharge and waste pipe but excluding flushing cistern complete all as specifed and directed.
S & F in repairs chromium plated brass spreader suitable for urinal complete all as specified and directed.
M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.
M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 including demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.
M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
M & L for providing 25 mm thick precast cement concrete louvers or RCC Jali made out of cement concrete 1:2:4 type B-0, using 12.5 mm graded stone aggregate and set in cement mortar 1:4 including all mouldings etc. complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc. and making good the disturbed portions of walls in cement mortar 1:4 complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc. and making good the disturbed portions of walls in cement mortar 1:4 complete all as specified and directed.
M & L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed.
S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed.
S & F of 35 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed.
S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.
Taking down door or window shutter of any description exc. 1.00 Sqm but not exc. 2.00 Sqm each complete all as specified and directed.
S & F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter as specified in clause No. 8.24 (b) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.
S & F of 150 mm long stainless steel butt hinges, medium weight complete all as specified and directed.
S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S & F of 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.
S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.
S & F in repairs aluminium extruded section body door closer hydraulically regulated designation No. 3, universal type suitable for door shutter 851 to 1000 mm in width and 61 to 80 Kg in weight complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S & F of 4 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S & F of 5.5 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S & F of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S & F in repairs wooden flooring (make signature) size 1215 x 195 mm and thickness 8.3 mm direct pressure laminated according to EN 13329 for glueless installation heavy domestic and light commercial use EN 13329 lavel of use 22 including under layer of 2 mm EP and polythene layer complete all as specified and directed.
M & L for providing plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course finished even and fair without using extra cement on roof surface / chajja / mud stopper any thickness complete all as specified and directed.
S & F of PVC board 19/20 mm thick any colour / prelaminated as in cabinets including shelves and shutters, fixed with screws and adhessive as per manufacturer's instructions including piano hinges, magnet catcher, handles etc. complete all as specified and directed.
Dismantling of corrugated or semi corrugated roof sheets any description from roof covering complete all as specified and directed.
S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F of aluminium anodised powder coated (minimum thickness of powder coating 50 micron) window, ventilator shutters and kitchen cupboards, side hung type or slidding type without sash bars, alumimium section weighing 0.55 Kg per RM with and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, aluminium anodised fittings such as 1 No. peg stay 150 mm long, 2 Nos. 100 mm long hinges type B-21, 1 No. aluminium handle complete all as specified and directed.
S & F of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators or partitions with one or more rebates including joining cleat etc. for fixing complete all as specified and directed.
M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M & L for POP false ceilig includng GI framing, main member C shaped spacing not exc. 1 m c/c having weight 300 to 350 gram per RM and cross member U shaped spacing exc 500 mm c/c having weight 250 to 300 gram per RM and C section fixed on parameter wall with screws and rawl plug including hanging arrateement to RCC slab with L shape member exc. 105 m (weight not less than 120 gram per RM) and wire mesh of dia 0.50 to 0.56 mm weight not less than 350 gram per sqm fixed with steel screws of GI framing and applying two coat of luxury emulsion (Royal) including finished upto the required mark complete all as specified and directed.
M & L for plaster of paris fancy moulding pattern in corners of ceiling in triangular shape of size 75 mm x 75 mm including finished upto the required mark complete all as specified and directed.
NOTES:- (a) Material not included in schedule of credit and debris from the dismantling having lowest value / Nil value shall be the property of department. The same shall be removed / disposed or deposited by the contractor in MES stores yard of GE (West) Bareilly as directed for which no additional payment shall be made. The contracotor shall be fully responsible to safe guard these materials against loss / theft / deterioration etc. till the same to be deposited by him in MES Store yard. (b) The contractor or his authorized representative shall attend office of AGE B/R for collection of complaints raised by user on regular basis and same has to be rectified / completed on requirement basis. If the contractors unable to rectify the complaints within stipulated time of 7 days (Maximum), penalty will be imposed to the contractor at the rate of Rs 500.00 per day for each complaint. (c) The above aspects shall be borne in mind by the tenderer while quoting the rates. The rates quoted by the tenderer shall be deemed to include the above aspects. (d) Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.
M/S Harshri Nath Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .