Construction of New Office building for Joint Director Horticulture, Vadodara Dist. Vadodara

Name of Work :- Construction of New Office building for Joint Director Horticulture,

Vadodara Dist. Vadodara

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rate in Amount

1 Excavation for foundation upto 1.50 mt depth including sorting out and 791.80 Cum 120.01

stacking of useful materials and disposing the excavated stuff for all lead

and lift for all sorts of soil.

2 Excavation for foundation from 1.50 mt to 3.00 mt. depth including sorting 498.80 Cum 166.44

out and stacking of useful materials and disposing the excavated stuff for all

lead and lift for all sorts of soil.

3 Filling foundation and plinth with sand under floors including watering, 115.40 Cum 471.69

ramming and consolidating dressing etc. complete.

4 Filling available excavated earth (excluding rock) in trenches plinth side of 769.30 Cum 133.65

foundation etc. in layer not exceeding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete.

5 Filling in foundation and plinth with murrum or selected soil in layers of 20 191.70 Cum 292.05

cm thickness including watering, ramming and consolidation etc. complete.

6 Applying general insecticide pest control treatment to floors, cupboards etc 323.10 Sq.m. 51.85

including labour materials etc. complete. Using Imidacloprid 30.5 SCas Per

IS 6313 part -II ((0.075% concentration by mass) is recommended 10.5ml

chemical diluted with 5 liters of water application 0.5 litre chemical /Sqm of

surface is recommended as per I.S.

7 Providing and laying cement concrete work 1:2:4 (1 cement : 2 coarse sand : 58.60 Cum 4170.63

4 graded stone aggregates 20 mm nominal size) and curing complete

including cost of formwork and excluding cost of reinforcement for reinforced

concrete work in (A) Foundation, footing, base or columns and mass

8 Providing and laying controlled cement concrete M-250 and curing complete 234.00 Cum 4486.70

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Foundations, footings base of columns & mass

9 Providing and laying controlled cement concrete M-250 and curing complete 23.60 Cum 7758.74

including the cost of form work but excluding cost of reinforcement for

reinforced concrete work in Columns, pillars, posts and struts upto plinth

10 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 53.80 Cum 3233.20

graded stone aggregate 40mm nominal size) and curing complete excluding

cost of form work in foundation and plinth.

11 Providing and laying controlled cement concrete M-200 and curing complete 20.00 Cum 7758.74

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts Ground Floor

12 Providing and laying controlled cement concrete M-200 and curing complete 15.00 Cum 7798.68

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in in Columns, pillars posts and struts for First floor

13 Providing and laying controlled cement concrete M-200 and curing complete 6.60 Cum 7838.63

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in in Columns, pillars posts and struts for Stair

14 Providing and laying controlled cement concrete M-250 and curing complete 68.70 Cum 5874.75

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Plinth BEAMS.

It. Item of Work Qty. Unit Rate in Amount

15 Providing and laying controlled cement concrete M-150 for curing complete 46.50 Cum 4131.61

excluding cost of formwork and reinforcement for reinforced concrete work in

(C) Slabs, landing, shelves, balconies, lintels, beams, girders and cantilever

upto floor two level.

16 Providing and laying controlled cement concrete M-200 and curing complete 40.24 Cum 6145.71

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in BEAMS Ground floor.

17 Providing and laying controlled cement concrete M-200 and curing complete 36.00 Cum 6185.65

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in BEAMS First floor.

18 Providing and laying controlled cement concrete M-200 and curing complete 4.14 Cum 6225.60

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in BEAMS for Stair Room Floor.

19 Providing and laying controlled cement concrete M-200 and curing complete 4.30 Cum 7831.68

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Lintel for Ground Floor.

20 Providing and laying controlled cement concrete M-200 and curing complete 4.20 Cum 7871.63

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Lintel for First Floor.

21 Providing and laying controlled cement concrete M-200 and curing complete 0.30 Cum 7911.57

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Lintel for Stair Room Floor.

22 Providing and laying controlled cement concrete M-200 and curing complete 4.10 Cum 7336.33

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Chhajja for Ground floor.

23 Providing and laying controlled cement concrete M-200 and curing complete 2.90 Cum 7376.27

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Chhajja for First floor.

24 Providing and laying controlled cement concrete M-200 and curing complete 0.50 Cum 7416.22

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Chhajja for Stair Room Floor.

25 Providing and laying controlled cement concrete M-200 and curing complete 49.80 Cum 6982.73

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in SLABS for Ground Floor.

26 Providing and laying controlled cement concrete M-200 and curing complete 41.00 Cum 7022.67

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in SLABS for First Floor.

27 Providing and laying controlled cement concrete M-200 and curing complete 4.40 Cum 7062.62

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in SLABS for Stair Room Floor.

28 Providing and laying controlled cement concrete M-200 and curing complete 9.00 Cum 7639.52

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Staircase for Ground Floor.

29 Providing and laying controlled cement concrete M-200 and curing complete 9.00 Cum 7679.46

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Staircase for First Floor.

30 Providing and laying controlled cement concrete M-200 and curing complete 7.70 Cum 11794.87

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in R.C.C. parapet wall at Terrace level.

31 Providing I.S.I. Mark Fe-500D T.M.T. bar reinforcement for RCC work 82033.18 Kg. 77.29

including bending, binding and placing in position complete for all floors.

It. Item of Work Qty. Unit Rate in Amount

32 Providing and laying brick work using common burnt clay building 120.00 Cum 4121.55

conventional type bricks having crushing strength not less than

Kg./Sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement :

coarse sand) including the cost of all materials and labour charges etc.

33 Providing and laying brick work using common burnt clay building 196.40 Cum 4403.40

conventional type bricks having crushing strength not less than 35 Kg/sq.cm.

in super structure above plinth level upto floor two level in cement mortar 1:6

(1 cement : 6 fine sand) for Ground Floor including the cost of all materials

and labour charges etc. complete.

34 Providing and laying brick work using common burnt clay building 116.90 Cum 4444.90

conventional type bricks having crushing strength not less than 35 Kg/sq.cm.

in super structure above plinth level upto floor two level in cement mortar 1:6

(1 cement : 6 fine sand) for First Floor including the cost of all materials and

labour charges etc. complete.

35 Providing and laying brick work using common burnt clay building 16.40 Cum 4486.40

conventional type bricks having crushing strength not less than 35 Kg/sq.cm.

in super structure above plinth level upto floor two level in cement mortar 1:6

(1 cement : 6 fine sand) for Second Floor including the cost of all materials

and labour charges etc. complete.

36 Providing and laying half brick work using common burnt clay building 66.00 Sq.m. 734.45

conventional type bricks having crushing strength not less than

Kg./Sq.cm. in cement mortar 1:3 (1 cement : 3 coarse sand) with 2 Nos. of

mm. diameter mild steel round bars after every three coarse embedded in

cement mortar in super structure for Ground floor including the cost of all

materials and labour charges etc. complete.

37 Providing and laying half brick work using common burnt clay building 102.70 Sq.m. 789.11

conventional type bricks having crushing strength not less than

Kg./Sq.cm. in cement mortar 1:3 (1 cement : 3 coarse sand) with 2 Nos. of

mm. diameter mild steel round bars after every three coarse embedded in

cement mortar in super structure for First floor including the cost of all

materials and labour charges etc. complete.

38 Providing and fixing double shutter of 35 x 100mm M.S. pipe hollow frame 7.30 Sq.m. 6688.87

work as shown in the detailed design double shutter specially design hollow

door with horizontal 25 x 25mm M.S. square pipe bands at equal distance

through out the height of the frame as per the detailed design provided by

the architect with 19mm marine ply with edge bedding & laminate on both

side colour pattern as design of which is to be approved by the architect or

39 Providing and fixing 38 mm thick Double Shutter pine flush door solid core 5.10 Sq.m. 3616.04

finished of BWP grade confirming to IS-710 of approved quality and design

including applying of 1mm thick laminate sheet of approved quality and

design to both side, all edges shall be covered with 35 x 12mm first class

teakwood bedding including required steel finished brass hardware like

hinges, handles, mortice locks, door stop, stoppers and lock, floor spring etc.

of approved brands and including extruded aluminum colour anodized "L"

section main outer frame size 63.50mm x 38.00mm x 2.50mm (of jindal

section 19552 @ Wt.1.1165 kg/mt) filled with country wood and providing

and applying minimum 3 coats of melamine polish and two coats of sealer

etc. complete as directed by Engineer-in-charge

It. Item of Work Qty. Unit Rate in Amount

40 Providing and fixing 38mm thick Single Shutter pine flush door solid core 64.00 Sq.m. 6689.04

finished of BWP grade confirming to IS-710 of approved quality and design

including applying of 5mm thick laminate sheet of approved quality and

design to both side, all edges shall be covered with 35 x 12mm first class

teakwood bedding including required steel finished brass hardware like

hinges, handles, mortice locks, door stop, stoppers and lock etc. of approved

brands extruded aluminum colour anodized "L" section main outer frame

size 63.50mm x 49.50mm x 2.65mm (of jindal section, @ Wt.1.657 kg/mt)

filled with contry wood and applying minimum 3 coats of melamine polish

and two coats of sealer on exposed wooden surfaces etc. complete as

directed by Engineer- in- charge.

41 Providing and fixing window having extruded aluminum colour anodized 34.00 Sq.m. 3581.06

section frame main outer size 95.00 mm x 31.75 mm x 2 mm (Weight

0.738/Rmt) horizontal three or two track and vertical member of size

mm x 31.75 mm x 2 mm (Weight :-1.06/Rmt), with sliding three shutters of

horizontal member size 50mm x 20mm x 1.5mm (@ wt.of 0.642Kg/mt),

vertical member of size 50.5mm x 20mm x 1.30mm (@ wt.of .495 Kg/mt)

with one shutter mosquito net & other shutter glass with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum

fittings & fixtures and lock strip, transparent silicon sealant glass fixing to

frame as per details etc. complete for window.

42 Providing and fixing standard extruded of alluminium section of size 65mm x 6.50 Sq.m. 1175.56

25mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame

for ventilation with 3 mm thick Bajari frosted glass louvers of standard make

as details etc. complete for Ventilation.

43 Providing and fixing Safety grills of required pattern for Windows / Door 2426.00 Kg. 111.47

using 16 mm dia M.S. polished bars and rectangular CRC pipes of size 50 x

30 x 2 mm at required spacing as per design and hold fasting with coach

bolts including one coat of primer and two coats of matt finished oil painting

44 Providing and laying 24" x 24" GVT/SALT/PVT Matt finish Full body vitrified 416.00 Sq.m. 1452.79

10 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 (1

cement : 6 coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring and jointed with

color cement slurry including finished with flush pointing & cleaning the

surface etc. complete for light shade / in two colour flooring.

45 Providing and laying 60 x 60 cm M.C.M.P. (Machine Cut Mirror Polished) 22.00 Sq.m. 1582.20

Blue Kotah stone {single piece not more than 1.50 mt} of even grade 25 mm

(average) thick for steps and riser as per design including quarter round front

edge & 1 cm nosing in trade of steps laid on 20 mm thick cement.

46 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 195.00 Sq.m. 1477.25

mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white

47 Providing and laying Ceramic Anti skid tiles 6mm thick in flooring treads of 68.00 Sq.m. 983.20

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement

: 3 coarse sand) finishing with flush pointing in white cement.

48 Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 24'' in skirting, riser 37.00 Sq.m. 1169.98

of steps and dedo laid on a bed of 10mm thick cement mortar 1:3 (1 cement

: 3 coarse sand) finishing with flush pointing in white cement.

49 Box cutting the road surface to proper slop and camber for making a base of 320.00 Cum 106.81

road work including removing the excavated stuff and depositing on the road

side slope as directed for all lead and lift.

It. Item of Work Qty. Unit Rate in Amount

50 Providing and fixing precast Rubber Dye / steel Dye inter locking concrete 847.00 Sq.m. 704.07

block 60mm thick with grade of concrete M-300 pneumatic compressed /

vibrated mechanically and as per approved design confirming to IS 15658 :

2006 including 35 mm sand layer for levelling and filling the joint with sand in

proper line and level as per guidelines of IRC : SP 63-2018 etc. complete.

51 Providing and laying water proofing treatment with china mosaic tiles flooring 335.00 Sq.m. 1057.84

over avg 40 mm C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Grit 6 to 12 mm

size} bedding for maintaining slope for plain and curve surface & 12 mm to

20 mm of broken piece of ceramic / glazed tiles (one for more color as

directed) to be laid over cement mortar bedding of C.M. 1:3 (1 cement :

sand) containing one Kg of water proofing materials per bag of O.P.C. at

plain or / and slops and to be tempered to bring mortar ceramic up to surface

with using white cement and colour pigment including rounding of junctions

and extending them up to 15 cm along the wall and curing with bends any

patterns or design as per drawing and cleaning by using oxalic acid etc.

52 Providing and fixing mirror polished 18 mm thick black granite stone in single 90.00 Sq.m. 2578.67

piece with full round edge and polished of approved quality in cladding on cill

& jambs and around the doors / windows / ventilation with 12 mm thick

cement mortar C.M. (1:4) and fixing with cement slurry & adhesive including

moulding of exposed edges in staggered as directed by engineering in

charge etc. complete.

53 Providing and laying machine cut machine polished black Granite stone 23.00 Sq.m. 2758.68

treads and risers in single piece Max. length with 1cm projecting, nozing

rounded moulding in tread laid over 12 mm (avg.) thick bases of cement

mortar 1:6 (1-cement : 6-coarse sand) jointed with grey or colour cement

slurry including rubbing and polishing including making three Nos. of

grooves of size 3mm x 3mm along the length of treads etc. complete

54 Granite Slab (18 mm thick) slab flooring over 20 mm (average) thick base of 73.00 Sq.m. 2546.21

cement mortar 1:6 laid over and jointed with grey cement slurry including

rubbing and polishing and rounding the front edge complete.

55 Providing 15mm thick cement plaster in single coat on rough (similar) side of 1375.00 Sq.m. 241.81

single or half brick walls for interior plastering upto floor two level and

finished even and smooth in cement mortar 1:3 (1 cement : 3 sand) finishing

with a floating coat of neat cement slurry for Ground floor.

56 Providing 15mm thick cement plaster in single coat on rough (similar) side of 821.00 Sq.m. 263.67

single or half brick walls for interior plastering upto floor two level and

finished even and smooth in cement mortar 1:3 (1 cement : 3 sand) finishing

with a floating coat of neat cement slurry for First floor.

57 Providing 15mm thick cement plaster in single coat on rough (similar) side of 117.00 Sq.m. 285.53

single or half brick walls for interior plastering upto floor two level and

finished even and smooth in cement mortar 1:3 (1 cement : 3 sand) finishing

with a floating coat of neat cement slurry for Second floor.

58 Providing 10 mm thick cement plaster in single coat for plastering on ceiling 350.00 Sq.m. 170.55

and soffits of stairs upto floor two level and finished even and smooth in

cement mortar 1:3 (1 cement : 3 sand) for Ground floor.

59 Providing 10 mm thick cement plaster in single coat for plastering on ceiling 305.00 Sq.m. 192.41

and soffits of stairs upto floor two level and finished even and smooth in

cement mortar 1:3 (1 cement : 3 sand) for First floor.

60 Providing 10 mm thick cement plaster in single coat for plastering on ceiling 26.00 Sq.m. 216.48

and soffits of stairs upto floor two level and finished even and smooth in

cement mortar 1:3 (1 cement : 3 sand) for Second floor.

It. Item of Work Qty. Unit Rate in Amount

61 Providing 20 mm thick sand faced GUTAKA FINISHED cement plaster on 1376.00 Sq.m. 382.79

walls upto all heights above ground level consisting of 12 mm. thick backing

coat of C.M. 1:3 (1 cement : 3 sand) and 8 mm. thick finishing coat of C.M.

1:1 (1 cement : 1 sand) including making groove 6 mm wide.

62 Providing and applying two coats of Birla or Asian acrylic lappy (putty) and 1804.00 Sq.m. 119.30

two coats of primer & wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on wall surfaces to give an even brushing

the surface free from mortar droppings and other foreign including wall

painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

63 Providing and applying two coats of Birla or Asian acrylic lappy (putty) and 681.00 Sq.m. 127.01

two coats Wall painting (Two coats) with plastic emulsion paint of approved

brand and manufacture on ceiling & soffit to give an even brushing the

surface free from mortar droppings and other foreign including wall painting

(two coats) with plastic emulsion paint of approved brand and manufacture

on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth.

64 Finishing wall with weather proof exterior emulsion paint on wall surface (two 1782.00 Sq.m. 117.40

coats) to give an required shape even shade after thoroughly brushing the

surface to remove all dirt, dust and remains of loose powdered materials etc.

65 Providing and fixing Stainless steel railing made from anticorrosive 304 31.70 Rmt. 1545.54

grade S.S. pipe of 50 mm dia. (16 gauge) as hand rail with 38 mm dia. pipe

for supports at 1.2 mt. vertical supports at equal distance fixed in RCC railing

including accessories as per detailed drawing as directed.

66 Providing, laying in true line and level I.S.I. mark 15 mm dia. U.P.V.C (Sch- 54.00 Rmt. 72.65

40) for cold water including fitting of equivalent make or as approved by

Engineer in charge. Pipe shall be fixed on the wall with held of clamp at

every two meter c/c shall be concealed as directed including necessary

fitting etc. including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials. (i) 15mm dia.

67 Providing, laying in true line and level I.S.I. mark 25 mm dia. U.P.V.C (Sch- 126.00 Rmt. 91.84

40) for cold water including fitting of equivalent make or as approved by

Engineer in charge. Pipe shall be fixed on the wall with held of clamp at

every two meter c/c shall be concealed as directed including necessary

fitting etc. including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials. (ii) 25mm dia.

68 Providing, laying in true line and level I.S.I. mark 40 mm dia. U.P.V.C (Sch- 103.50 Rmt. 148.12

40) for cold water including fitting of equivalent make or as approved by

Engineer in charge. Pipe shall be fixed on the wall with held of clamp at

every two meter c/c shall be concealed as directed including necessary

fitting etc. including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials. (i) 40mm dia.

69 Providing, laying in true line and level I.S.I. mark 50 mm dia. U.P.V.C (Sch- 27.00 Rmt. 195.67

40) for cold water including fitting of equivalent make or as approved by

Engineer in charge. Pipe shall be fixed on the wall with held of clamp at

every two meter c/c shall be concealed as directed including necessary

fitting etc. including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials. (i) 50mm dia.

70 Providing and fixing Heavy Handle valve of approved brand & following 10.00 No. 296.18

internal dia. of brass including fixing in pipe lines etc. complete (C) 25 mm

It. Item of Work Qty. Unit Rate in Amount

71 Providing and fixing Heavy Handle valve of approved brand & following 8.00 No. 423.95

internal dia. of brass including fixing in pipe lines etc. complete (E) 40mm

72 Providing and fixing Butterfly valves IS 13095 with ISI mark PN 1.6 of 4.00 No. 2194.98

approved brand & following internal dia. including fixing in pipe lines etc.

complete (C) 50 mm dia.

73 Providing, laying and jointing in true line and level I.S.I. mark 110 diametre 279.00 Rmt. 856.03

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other

end socketed with rubber ring & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 110 mm diametre x 149 mm length x 145 mm heigh at every

mm center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all

74 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100mm 20.00 No. 585.37

diameter with jali of the following nominal diameter of self cleansing design

with C.I. screwed down or hinged grating including the cost of cutting and

making good the walls.

75 Providing and fixing screw down quarter turn bib taps of following size (A) 30.00 No. 186.83

Brass chromium plated screw down bib tap (i) 15 mm dia. as approved by

Engineer in charge.

76 Providing and fixing C.P. brass quarter turn pillar tap, capstan head screw 20.00 No. 308.73

down high pressure with screw, shanks and back nuts (A) 15 mm dia. as

approved by Engineer in charge.

77 Providing and fixing wash basin Coral (52 dia.) C.P. brass bottle trap with 12.00 No. 2004.85

brass union and C.P. brass wall discharge with flanges and cap, 32mm dia.

G.I. waste pipe with fittings up to floor trap, 32mm dia. C.P. brass waste

couplin with C.P. chain and rubber plug, 15 mm dia. C.P. brass concealed

stop valve 15mm heavily quality flexible PVC inlet connection of required

length with brass union, washer and C.P. brass cap complete in all respects

with 15mm dia C.P. brass pillar tap cutting and making good the walls RCC

work as directed and making good the same etc. complete.

78 Providing and fixing wash down water closet (European type, W.C. Pan) with 14.00 No. 4307.01

integral "P" or "S" trap and PVC flushing cistern with fittings etc. complete

including plastic sheet cover including jointing trap with pipe in C.M. 1:1 and

connecting cistern with closet & jet spray heavy duty with S.S. braided hose

79 Providing, erecting and fixing double coated PVC (ISI) mark water tank of 10000.00 Litre 3.95

required capacity each with all necessary fittings and connection

etc.complete on terrace.

80 Providing and fixing 600 mm x 450 mm beveled edge mirror of superior 12.00 No. 854.58

glass mounted on 6 mm thick A.C sheet or plywood sheet or PVC framing

and fixed to wooden plugs with C.P. brass screw and washers.

81 Providing and fixing C.P. brass stop cock of approved quality 15 mm size 30.00 No. 205.83

with adjustable wall flange.

82 Providing and fixing S.W. gully trap with C.I. grating brick masonary chamber 12.00 No. 1246.92

and water tight C.I. cover with frames of 300mm x 300mm size (Indian) with

standard weight (i) square mouth traps (ii) 150mm x 100mm size 'P' or R

It. Item of Work Qty. Unit Rate in Amount

83 Constructing brick masonary chamber for under ground C.I. Inspection 33.00 No. 3005.16

chamber and bends with bricks having crushing strength not less than

Kg/cm2 in C.M. 1:5 C.I. cover with frame (light duty) 455 mm x 610 mm.

Internal dimensions, total weight of cover with frame to be not less than

Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm.

size) foundation concrete 1:5:10 inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls &

bed concrete etc. complete. (I) inside dimensions, 455 mm. x 610 mm. and

450 mm. deep for single pipe line.

84 Providing 12 mm wide and deep groove in plaster as directed by engineer in 220.00 Rmt. 20.20

charge for all height.

85 Providing and fixing louvers: 114 mm wide G.I. sheet having thickness of 10.00 Sq.m. 2535.10

0.55mm & weight not less than 490 gm/m, roll formed to create 84mm wide

louver snap fixed on special shaped G.I. channels fix louvers and channels

shall furnished with powder coating.

86 Wall painting (two coats) with plastic emulsion paint of approved brand and 2335.00 Sq.m. 80.87

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

87 Providing and fixing flat back long pattern urinal of approved quality including 8.00 No. 1942.35

urinal flush valve 15mm size control cock with 300mm long connecting pipe

and nuts and P.V.C. waste coupling and waste pipe etc. complete.

88 Distance Informatory / Destination sign : Providing and fixing sign boards 2.00 No. 10926.57

made out of 2mm aluminium sheet size 180 x 120cms. rectangle as per the

design of IRC-67-1977 pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy

paint; reflectorised with retro reflective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m

long (2 nos) stand post and frame fabricated from suitable size iron angle of

50 x 50 x 5mm 75 x 75 x 6mm as required; painted with best quality epoxy

coatings in black and white bends. the details of symbol or inscription /

numerals for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms.

for each leg including excavation curing etc. complete under the supervision

of engineer in charge. (A) Engineer grade.

89 Providing and fixing eco-friendly light weight calcium silicate false ceiling 259.00 Sq.m. 1674.15

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have, light reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity0.043° w/m

KC.for the best thermal Insulation. The Light weight calcium Silicate tile shall

be of approved texture Fine fissured/ Spintone/Cosmos having NRC value of

0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 x

mm to be laid on true horizontal level suspended inter locking metal grid of

hot dipped galvanized steel sections (galvanizing @120 grams per sqm

including both side) consisting of main ‘T’ runner suitably spaced at joints to

get required length and size of 24 x 38mm made from 0.30 mm thick

(minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24 x 28mm

made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced

between main ‘T’ at 600mm centre to centre to form agrid of 1200 x 600mm

and secondary cross ’T’ of length 600mm

It. Item of Work Qty. Unit Rate in Amount

and size 24 x 28mm made of 0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200 x 600mm panel to form grid of size 600 x

600mm resting on periphery walls/partitions on a perimeter wall angle pre-

coated steel of size (24 x 24 x 3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre with 25mm long

dry wall screws @ 230mm interval and laying 15mm thick Densified edges

light weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for

services like diffusers, grills, light fittings, fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to be suspended from ceiling using G.I.

slotted cleats of size 25 x 35 x 1.6mm fixed to ceiling with 12.5mm dia and

50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel

level clips of size 85 x 30 x 0.8mm, spaced at 1200mm centre to centre long

main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted

with polyester baked paint, for all heights, as per specifications, drawings

and as directed by engineerin- charge.

Note :- Only calcium silicate false ceiling area will be measured from wall to

wall. No deduction shall be made for exposed frames/opening (cut outs)

having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have

NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and

NRC for Globe, light reflection 85% non combustibleas per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity 0.043° w/m

KC.for the best thermal Insulation

90 Providing and laying in foundation cement concrete 1:3:6 (1 cement : 3 197.00 Cum 3541.76

coarse sand : 6 B.T. stone aggregate 20mm nominal size) and curing

complete including cost of form work in plinth protection.

91 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 88.00 Rmt. 42.70

92 Providing and laying both side mirror polished Granite stone slab 18 mm 10.80 Sq.m. 1752.02

(Average) thick of approved quality including full moulded round front edge

fixed in wall for partition and jointed with grey cement slurry including rubbing

and polishing etc. complete.

93 Providing and fixing in position 300mm high, 150mm wide English / Gujarati 50.00 No. 707.00

letters made from 1.0mm thick stainless steel sheet as directed by Engineer

in charge with all material, hardware, accessories and fittings etc. complete.

94 Providing and fixing Signages (Acrylic Name Plates) having size of 315 x 30.00 No. 353.50

200 x 5 mm thick displaying names of offices, room, toilet, passage etc.

having fonts, colour as directed by the Engineer in charge.

95 Supplying and laying, spreading and compacting of hard stone of following 155.00 Cum 2265.47

nominal size including carraige of material spreading in uniform layers

manually on prepared base and compacted with power roller to achieve

desired density including all materials - WBM using 40 to 63 mm size B.T.

metal and 25% stone dust for binding material, labours etc. complete. as

96 Providing and laying controlled cement concrete M-250 for trimix cement 123.00 Cum 4292.36

concrete road and curing complete including cost of formwork but excluding

cost of reinforcement for RCC road by using floater, vaccume, dewatering

process including making groove for joint ct. 5 m c/c & at full depth of the

thickness and 5 to 10 mm wide by diamond cutter and filling the joints with

polysyphide etc. complete.

97 Supplying premoulded bituminous joint filler. (i) 12mm thick. 0.50 Cum 553.79

98 Providing and fixing precast concrete kerb stone of grey cement based 243.00 Rmt. 394.59

concrete block 30cm length, 30cm height and 15cm thick of M-250 grade

concrete as per approved design and including excavation for fixing in

proper line and level, filling the joint with C.M. 1:3 (1 cement : 3 fine sand)

etc. complete as directed by Engineer in charge.

It. Item of Work Qty. Unit Rate in Amount

99 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with 70.00 Rmt. 1001.93

collars for culverts including setting and joining the pipes in C.M. 1:2

watering and laying (To level of slops of I.S. 458 / 1971 Class NP3 casted by

vertically vibrated technology of following internal diameter. (i) 300 mm dia.

100 Filling around the pipes with murrum including dressing, tampering etc. 25.00 Cum 51.31

101 Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 7.40 Cum 3656.13

graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in Foundation and plinth.

102 Steel work, welded in built up sections framed work including cutting, 27.00 Qtl. 9737.86

hoisting, fixing in position and applying a priming coat of red lead paint. (A)

In beam and joists, channels, angles, tees, flats, with connecting plate or

angle cleat as in main and cross beam. Hip and jack rafters, purlins

connected to common rafters and including painting two coats of oil painting

over primer coat etc. complete.

103 Providing corrugated pre painted / Pre coated galvalume (PPGL) sheets 180.00 Sq.m. 861.35

roofing fixed with galvanized iron 'J' or 'L' hooks bolts and nuts 8 m. diameter

with bitumen and G.I. Limpet washers filled with white lead complete

including ridges, gutters etc. excluding the cost of purlins, rafters and

trusses. (1) 0.50-0.60 mm. thick sheet.

104 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 6.40 Cum 3993.11

graded stone aggregate 20mm nominal size) and curing complete including

the cost of form work in (A) Wall caps / coping.

105 Providing and fixing M.S. compound gate of required pattern to fix on wall as 580.00 Kg. 107.70

per given detailed drawing using M.S. flats, M.S. square/round bars, cast

iron decorative pattern and fixing with necessary required nuts, bolts and

welding works etc. comp.including one coat of primer coat and two coats of

synthetic enemal paint. (A) Plain grill.

106 Constructing cattle trap made from ISMC 100 border and G.I. pipe 50 mm 18.00 Sq.m. 9004.66

dia heavy duty at 12 cm spacing by welding and necessary support of

I.S.M.B 100 x 75 x 6 mm section fixing in prepared chamber as per drawing

by necessary arrangement etc complete.

107 Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. angle 142.00 Rmt. 303.83

posts 40mm x 40mm x 6mm and oil painting 3 coats fixed at 2.50m c/c with

five horizontal lines and two diagonals of galvanised steel barbed wire

weighting 9.38kg. per 100m. strained and fixed to posts with G.I. staples

including fixing posts in brick columns with C.C. 1:2:4 of size 0.35 x 0.35 x

108 Providing and laying controlled cement concrete M-250 and curing complete 8.70 Cum 6469.06

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (B) Walls from top of foundation level upto floor

109 Providing 20 mm thick water proof cement plaster for sunk in single coat on 39.00 Sq.m. 306.96

bricks/ concrete wall for interior plastering upto floor two level finished even

and smooth cement mortar 1:3 (1 cement : 3 sand) and mixing waterproofing

materials of approved brand and manufacture in cement mortar in proportion

recommended by the manufacturer for all floors.

110 Providing and laying white glazed tiles 6mm thick in flooring, treads of steps 13.00 Sq.m. 939.18

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand) finishing with flush pointing in white cement.

111 Providing and laying white glazed tiles 6mm thick in skirting, risers of steps 39.00 Sq.m. 970.17

and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and

jointed with white cement slurry.

It. Item of Work Qty. Unit Rate in Amount

112 Providing and laying hand dressed polished blue Kota stone slab flooring 16.00 Sq.m. 1001.14

over 20mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse

sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry including

rubbing and semi mirror polishing with emery no. 600 etc. complete. (A)

113 Providing and laying polished blue kotah stone slab 25mm thick in risers of 2.50 Sq.m. 1149.52

steps, skirting, dedo and pillars laid on 10mm thick cement mortar 1:3 (1

cement : 3 coarse sand) and jointed with gray cement slurry mixed with

pigment to match the shade of slab including rubbing and polishing etc.

114 Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 25.00 Rmt. 24.28

1:1 including neat cement finishing, watering etc. complete.

115 Providing and fixing 35 mm thick shutters for Doors, windows and clerestory 2.60 Rmt. 5533.68

windows including Indian teak wood frames 12 cm x 7 cm. size including

including black enamelled iron oxidixed fixtures and fastenings including

primer coat of approved quality and two coats of oil painting etc, complete.

(ii) Fully Panelled.

116 Providing and fixing window having extruded aluminum colour anodized 12.00 Sq.m. 1713.70

section frame main outer size 63.50 x 38.10 x 1.95 mm (@ Wt 1.094 Kg /

Rmt), horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm (@

wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm

(@ wt.of 0.659 Kg/mt) with sliding shutters of horizontal member size 40mm

x 18mm x 1.29mm (@ wt. of 0.456 Kg/mt), vertical member of size 40mm x

18mm x 1.29mm (@ wt. of 0.456 Kg/mt. & @ Wt. 0.457 Kg/mt) with 5 mm

thick transparent bronze colour tinted float glass with anodized aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details as directed by Engineer in charge for all floors.

117 Providing and fixing mild steel door with 40 x 40 x 6 mm angle for frame and 63.00 Kg. 110.22

for shutter frame 30 x 30 x 3 angle for windows frame of angle 35 x 35 x 5 &

for shutter windows 25 x 25 x 3 mm size angle and 18 gauge sheet for

panels & 10 mm dia. bars at 10 cm c/c for grill and 40 x 6 mm flats on edge

of shutter & 20 x 6 mm binding patti, including one coat of primer and two

coats of oil painting etc. complete as per detail / as directed by Engineer in

118 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight 1.00 No. 958.17

not less than 35 Kg.

119 Providing and fixing concealed centre point to wall, ceiling and floor I.S.I. 25.00 Rmt. 660.58

mark C.P.V.C. (SDR 13.5) pipe having National Sanitation Foundation (NSF)

seal for potable water of following nominal bore tube fitting and clamps

including making good the wall, ceiling and floor etc. complete. (F) 50 mm

120 Providing and fixing concealed centre point to wall, ceiling and floor I.S.I. 45.00 Rmt. 447.72

mark C.P.V.C. (SDR 13.5) pipe having National Sanitation Foundation (NSF)

seal for potable water of following nominal bore tube fitting and clamps

including making good the wall, ceiling and floor etc. complete. (E) 40 mm

121 Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and 14.00 No. 207.66

painting with two coats of Anti-corrosive paint etc. complete.

122 Drilling of 250mm dia. bore in over burden strata (0-30) including lowering 100.00 Rmt. 339.36

and fixing of 165mm nominal dia. UPVC pipe upto required depth and future

drilling of 165mm dia. bore hole in rocky strata by DTH ring.

123 Providing and supplying of 200mm nominal dia. plain casing UPVC pipes 50.00 Rmt. 1350.37

"CM" type store or at site of work in standard length with necessary coupler,

cement solvent joint along with cement solvent including freight, insurance,

octroi taxes etc. complete.

It. Item of Work Qty. Unit Rate in Amount

124 Providing and lowering of 160mm dia. PVC slotted pipe etc. complete. 50.00 Rmt. 929.20

125 Providing and fixing bore plug having 100mm height made from UPVC of 1.00 No. 593.88

standard make suitable for 200mm dia. pipe.

126 Providing and fixing Gun metal check or non-return fullway wheel valve / 4.00 No. 663.43

handle valve. (E) 40mm dia.

127 Supply of best quality of well sorted "Sevaliya" gravel of size 4mm to 6mm. 3.00 Cum 2295.73

128 Providing and fixing 50mm dia. HDPE pipe of standard quality and make as 85.00 Rmt. 79.79

approved by Engineer in charge including jointing with submersible lowering

the same in bore with all necessary couplers etc. complete.

129 Cleaning of bore hole by sand barrel system including removing foreign 85.00 Rmt. 181.80

materials sand, clay, pebbles etc. with necessary tools, plants and

accessories etc. complete.

130 Clamps made from M.S. plate with 3 holes on either side with nuts & bolts of 1.00 No. 1753.36

standard make and suitable size (F) 750 mm x 75 mm x 16mm for (D)

200mm dia. pipe.

131 M.S. bail plug having length 0.45 mt. from medium class pipe as per IS 1.00 No. 713.06

suitable for (c) 150 mm dia.

132 Providing reducer made from 6mm thick plate (M.S.) for ERW pipe of size 1.00 No. 1562.47

150mm x 200 mm x 600mm length.

133 Providing, laying and jointing in true line and level 160 mm diametre U.P.V.C 60.00 Rmt. 834.38

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 149 mm length x 145 mm height at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

134 Providing junction for rainwater junction chamber of size 0.60 x 0.60 x 0.75 5.00 No. 4147.06

m with excavation of size 1.04 x 1.04 x 0.90 and 0.15 mt thick C.C. 1:4:8 bed

concrete including half brick masonary in C.M. 1:4 of 0.75 m height with

15mm thick cement plaster with floating coat of neat cement slurry inside in

C.M.1:4, C:C 1:2:4 flooring bed 40 mm thick and 0.60 m x 0.45 m cast iron

manhole cover with frame with weight not less than 35 kg as per detailed as

135 Providing filter chamber of brick work in C.M. 1:5 of clear size 2.06 m x 1.21 2.00 No. 12185.65

m x 1.20 m and excavation dimension of 2.36 x 1.51 x 1.35 m including

C.C. 1:4:8 bed concrete of 0.15 m thick including brick work in C.M. 1:6 for

23 cm thick wall including 15mm thick cement plaster with floating coat of

neat cement slurry inside and out side 10 cm thick RCC 1:2:4 top cover and

manhole cover with frame of minimum weight of 35kg and filling filter

material Kapachi and sand as per detailed as directed.

136 Providing recharging pit of size 2.00 mt dia. & 4.00 Metre depth for water 1.00 No. 72232.17

logging with excavation, PCC (1:2:4) for foundation, brick masonary in C.M.

1:6, RCC top slab C.C. (1:2:4) 10 cm thick with C.I. manhole cover of 0.6 x

0.45 mt size having weight not less than 35 Kg. including cost of

reinforcement & formwork, filling the pit with sand, gravel, Kapachi 25 to

mm size in layers including making 300 mm dia bore depth 30.00 metre &

200 mm dia. plain / stainer PVC pipe as required of 6.0 Kgf/cm2 as casing

as per detailed as directed.

It. Item of Work Qty. Unit Rate in Amount

137 Earth work for embankment including breaking clods, dress in with all lead 436.00 Cum 182.68

and lift including watering, rolling of earth work in layers with power roller

including filling the depressions which occur during the process from borrow

pits within 2.00 Km. lead.

138 Supply & installation ISI marked (IS:15683) Fire Extinguisher, Carbon- 11.00 No. 4545.00

dioxide type capacity 4.5 Kgs. flat base including valve, discharge hose of

not less than 10mm dia., 1M long and complete in all respects including

initial fill with CO2 gas conforming to IS:307 filled to a filling rate of not more

than 0.667 and wall suspension bracket (LMR) etc. completed as directed

139 Supply & installing 5 Kg fire Extinguisher mono ammonium phosphate 11.00 No. 1868.50

powder 50%, stored pressure type, pressure gauge, controllable discharge

mechanism with discharge hose & nozzle, class A rating 3A & class B rating

21B (Tested upto 34B) as per IS:15683 ISI mark (ABC dry chemical powder -

140 Excavation for foundation from 3.0 mt to 5.0 mt depth including sorting out 33.00 Cum 317.87

and stacking of useful materials and disposing of the excavated stuff up to

50 m. lead in (D) Soft rock not requiring blasting.

141 Providing and laying cement concrete 1:4:8 using 40 mm size crushed 9.00 Cum 2899.71

aggregate in foundation and plinth.

142 Providing and fixing to wall, ceiling and floor galvanised mild steel tubes 172.00 Rmt. 794.18

(Medium grade) of the following nominal bore, tube fitting and clamps

including making good the wall, ceiling and floor. (F) 50mm

143 Providing and fixing gun metal check or non-return full-way wheel valve 15.00 No. 959.50

144 Constructing brick masonary chamber for under ground inspection chamber 10.00 No. 3764.27

and bends with bricks having crushing strength not less than 35Kg./Cm2 in

cement mortar 1:5 using 5.00 M.T. load carrying capacity reinforced cement

concrete cover with frame of standard size and thickness reinforced cement

concrete top slab with 1:2:4 mix (1-cement : 2 coarse sand : 4 graded stone

aggregate 20MM size) foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete. [I] Inside dimensions, 455mm x

610mm and 650mm deep for single pipe line.

145 Constructing brick masonary chamber for under ground inspection chamber 18.00 No. 4006.27

and bends with bricks having crushing strength not less than 35Kg./Cm2 in

cement mortar 1:5 using 5.00 M.T. load carrying capacity reinforced cement

concrete cover with frame of standard size and thickness reinforced cement

concrete top slab with 1:2:4 mix (1-cement : 2 coarse sand: 4 graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete. [I] Inside dimensions, 455mm x

610mm and 850mm deep for single pipe line.

146 Providing, laying (to level or slopes) and jointing reinforced concrete light 80.00 Rmt. 678.01

duty non-pressure pipes I.S. class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints including testing of joints

complete. (C) 300mm

147 Providing, laying (to level or slopes) and jointing reinforced concrete light 100.00 Rmt. 1077.13

duty non-pressure pipes I.S. class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints including testing of joints

complete. (D) 450mm

It. Item of Work Qty. Unit Rate in Amount

148 Providing and laying 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 13.00 Sq.m. 1099.95

(average) base of cement mortar 1:6 (1 cement : 6 coarse sand) on new

surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry

including finished with flush pointing & cleaning the surface etc. complete for

149 Supplying of yellow or Goradu soil will all lead and lift including spreading 48.00 Cum 323.20

watering dressing etc. complete.

150 Spreading of DAP fertilizer mixing with soil properly levelling & dressing etc 46.00 Cum 81.81

151 Supplying of well rotted FYM (Farm Yard manure) with all lead and lift 7.50 Cum 424.20

including spreading mixing dressing etc. complete.

152 Plantation of trees in soil including digging 45 x 45 x 45cm size pits, 35.00 No. 40.40

preparing soil providing and mixing fertilizer, watering, planting and filling the

pits as per direction including etc. complete

153 Providing Tree Plants having minimum 1.00mt. Height and healthy growth of 35.00 No. 151.50

various kinds as like Peltoform, Palm,Gulmahore, Karanj, Amla, Rain tree,

Saptparni, Cherry, Cryjeliya, Spethodiya, Paras Pipala, Garmalo, Neem,

Borsalli, Kadam, Buch, Chanpo, Asopalav etc. as per instruction by engineer

154 Maintenance of Planted tree upto 60 Days including watering, digging pits / 115.00 No. 404.00

rimming applying fertilizer, instectiside, pestiside and replacing plants if

necessary etc. complete for raising of Plants weeding or soil working also

including maintaining Water supply lines and drip lines of Plantation (Water

and Electricity supply by Dept.)

155 Providing and fixing 1.8mt. Height and 45cm dia round Tree guard by using 35.00 No. 1013.03

32mm x 32mm x 3mm size vertical MS angle and 50 x 50 mm x 10 gauge

welded steel mesh framing on 32 x 3 mm MS flats and MS sheet name plate

200 x 50mm as per design including one coat of primer and two coats of oil

painting etc. complete.

156 Planting and developing flowering plants grown in nursery having 80.00 No. 202.00

approximate height 4 to 5 ft or Height as per Landscape Plan with natural

growth and natural colour planted in a lump of soil packed in polithyline bag

or Earthern pot. including organic & chemical fertilizer Pesticides, fungicides,

hormones & maintaining the plants up to three months as Jasud, deserted.

Eforbia, Croton-1, Eforbia, Croton-2 - Flower bed & others as directed by EIC

157 Providing & erecting open well horizontal mono block pump set with C.I. 1.00 No. 8655.70

body having following specification. (i) 1 H.P. single phase open well motor

pumpset suitable for 145 lpm (ii) Suitable for 32 dia. delivery pipe with

control panel & 10mtr. long 3 x 1.5 Sq.mm submersible flat copper cable

158 Providing and fixing Drip Irrigation system of approved brand for Plantation

including fixing with water supply line and plantations per drawing and

Screen Filter 25000 ltr capacity per day 1.00 No. 1464.50

Pressure Gauge 1" dia. (0-2 Kg. / Sqcm) 1.00 No. 313.10

Bypass Assembaly Gun Metal 1.00 No. 1818.00

32 dia. Control Valve 1.00 No. 323.20

16mm internal HDPE pipe 2.5Kg. including fitting 150.00 Rmt. 8.89

159 Providing and laying in trenches 10.0kg.f/ Sqcm working pressure PVC pipes 100.00 Rmt. 171.21

of the following outside dia. having white colour complete with necessary

fittings clamps etc. (B) 50mm

160 Providing and laying in trenches 10.0kg.f/ Sqcm working pressure PVC pipes 50.00 Rmt. 121.97

of the following outside dia. having white colour complete with necessary

fittings clamps etc. (A) 32mm

It. Item of Work Qty. Unit Rate in Amount

161 Bowing and developing flowering plants grown in nursery having 150.00 No. 18.18

approximate height 0.5 to 1 ft or Height as per Landscape Plan with natural

growth and natural colour planted in a lump of soil packed in polithyline bag

or Earthern pot. including organic & chemical fertilizer Pesticides, fungicides,

hormones & maintaining the plants up to three months as deserted. Duranta

162 Bowing and developing flowering plants grown in nursery having 150.00 No. 20.20

approximate height 0.5 to 1. ft or Height as per Landscape Plan with natural

growth and natural colour planted in a lump of soil packed in polithyline bag

or Earthern pot including organic & chemical fertilizer Pesticides, fungicides,

hormones & maintaining the plants up to three months as deserted. Green

163 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 3.90 Cum 2271.49

hand broken stone aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and plinth.

164 White washing with lime on wall surface (two coats) to give an even shade 103.00 Sq.m. 12.73

including thoroughly booming the surface to remove all dirt, dust, mortar

drops and other foreign matter.

165 Removal of existing grass from top soil upto a depth of 23 cm breaking and 191.00 Sq.m. 101.00

drying of lumps, removal of all dried roots, cleaning the soil and rought

leveling and preparing the lawn bed , preparing and laying of peat moss

mulch, mixing : watering laying adequate quantity of loam oil bed : grading

and compaction by watering.

166 Planting of lawn of approved quality at 15 cms diagonally, maintenance of 191.00 Sq.m. 80.80

the laen till virtual completion of soft landscape work : removal of all

thatching through out the area: along with appropriate use of termite and of

weedixite as red when required and grassing lawn.

Electrical Items

167 Point wiring for Light/ Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm 88.00 Pt. 449.45

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed

in/ on surface on wall/ceiling complete with 6A Modular type switch/ bell

push & accessories and earth continuity of following type, erected on PVC /

Metallic box, single mounting base frame covered with textured / metallic

front plate modules erected on/ in wall/ ceiling as per pipe erected, with

necessary Lamp holder/ ceiling rose / H.D. Connector as directed. (a) with

medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete. Cat-III

168 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) 36.00 Pt. 638.32

both are of ISI marked 1.1 KV Grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in / flushed

on wall/ceiling complete with 6A Modular type switch and hum free EME four

or more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC / Metallic

box, single mounting base frame covered with textured / metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D. Connector as directed. (a) with medium class Rigid PVC

pipe and accessories, Cat-III

169 Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket 19.00 Pt. 257.55

erected on PVC / Metallic box, single mounting base frame covered with

textured / metallic front plate modules erected on / in wall / ceiling with

following type accessories, Cat-III

It. Item of Work Qty. Unit Rate in Amount

170 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both 11.00 Pt. 711.04

are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper

wires, in following type of to be erected concealed in / on surface of wall /

ceiling complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic box covered with appropriate front plate modules erected on / in wall

/ ceiling as per pipe erected with following type of accessories. [II] For 16A

Plug with 2-2.5 sq.mm Cu. Wire, (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete, Cat-III

171 Providing following type of Modular Type Accessories mounted with PVC /

metallic / Wooden box, single mounting base frame covered with textured /

metallic / white front plate, modules erected with necessary connections as

per site situation directed by Engineer In charge.

(13) 6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch, Cat-III 14.00 Nos. 310.07

(10) 6/16 Amp. Universal socket, Cat-III 14.00 Nos. 199.98

172 Providing & erecting Switch board for Computer or electric apparatus 18.00 Nos. 1133.22

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered with

textured / metallic / white front plate, modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug [B] For Modular Type Accessories, Cat-III

173 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 333.00 Mtr. 82.82

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in / flushed on wall/ceiling, with 1.5 sq.mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size, (a) with medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 mm²

174 Replacing old & u/s providing and erecting Mains with 1.1 KV grade FRLS 148.00 Mtr. 112.11

PVC insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected in / on wall / ceiling with 2.5 sq.mm copper conductor

FRLS PVC insulated stranded wire of green colour for earth continuity of

following size (a) 2 wire 4 sq. mm

(h) 4 wire 6 sq. mmm 80.00 Mtr. 260.58

175 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv 126.00 mtr 77.77

grade ISI marked copper wires of following size to be erected as directed.(h)

2.50 Sq.mm 3 core round PVC sheathed

176 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / 270.00 Mtr. 126.25

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables, (B) 4 core

177 Decorative call bell Ting-tong box type 250 volts complete erected. 2.00 Nos. 71.71

178 Providing and erecting ISI mark Medium class RIGID PVC PIPES of 50.00 Mtr. 33.33

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution &

clamps with following dia. of pipes, in approved manner as directed (b)

179 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 12.00 Nos. 535.30

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA / aluminium

die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95, THD

< 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED

LED driver efficiency > 85% (fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings. The Engineer incharge may select any wattage capacity between the

ranges shown) (A) Tube Light with integral/ non-integral driver, (v) 36-40

Watts, Surge-2 KV, IP-20, conventional 4 feet, Cat-III

It. Item of Work Qty. Unit Rate in Amount

180 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 40.00 Nos. 1794.77

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt, LED driver efficiency > 85% (fitting

required LM-79 & LM-80 Certificates) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown) (B) LED Panel Light

with provision for Plane front frame with translucent cover fixed to housing

complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV Cat-III.

181 Supplying and erecting led lamps with following wattage capacity of 220 to 14.00 Nos. 112.11

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection, Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (b) 5 to 8 watts

182 Providing and erecting Approved make Ceiling fan with double ball bearing 36.00 Nos. 1596.81

ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete,

canopy erected on existing hook or clamp with earthing. [Make shall be

approved by Engineer in charge]]

183 Supplying and erecting 19/20 mm. nominal bore Medium Class M.S. Pipe 36.00 Mtr. 108.07

down rod erected duly painted for fan complete with necessary 24/ O.20,

core flexible wire with earthing.

184 Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC 36.00 ea 43.43

slab with Making the site as original.

185 Providing and erecting Inverter based approved make split air-conditioning 5.00 ea 56353.96

unit consisting of condensing unit with variable speed fan motor, inverter

type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper tubing,

drain PVC pipes suitable for (cost includes Eco Friendly green gas charging

and 15A plug top & Remote Control & MS Stand) with necessary core

cutting. (1) For ISEER Range (KWH/KWH) (3.1 to 3.99) (C) for 1.7 to 2 ton

capacity - Premium Cat..

186 Supplying and erecting insulated pair of soft copper tubing open or 15.00 mtr 965.56

concealed including power and control cable, necessary PVC drain pipes for

Split AC machine up to 4 TR capacity.

187 Supply and Erecting of Static Stabilizer suitable for following capacity of A.C 5.00 ea 4029.90

Machine the Stabilizer Must have Minimum Technical Specification are Input

working Single Phase Voltage Range Up to 150V-280V.50Hz, Output

Voltage Range Up to 200V-240V, 50Hz, Autoreset Facility, LED Display for

Indicating Voltage, Spike/Surge Protection, Time Delay Facility, Proper Wall

Mount facility with required accessries & on site 3 year Replacement /

Repairing Warranty.

(2) For 2 Ton Thermal Overload Protection 15 Amp.

188 Providing, erecting, fabricating the M.S. structure as per requirement on site 5.00 Kg 77.77

incorporating proper size of M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding & finishing duly painted with

one coat of red oxide with erection on site as per direction of engineer in

charge with necessary grouting, cementing, plastering & finishing complete..

189 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling 2.00 Nos. 55893.40

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of

the water should drop by 15˚C within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating, coil, thermostats, relay etc. complete

with necessary inlet & outlet connection. The body of water cooler will be

made from Stainless Steel..

It. Item of Work Qty. Unit Rate in Amount

190 Supplying & erecting reverse osmosis (RO) water purification system with 2.00 Nos. 77891.20

M.S. powder coated pedestal frame, prefilter housing carbon filter suitable

buster DC pump, auto low & high pressure switches with following size of

LPH capacity & erected as directed [D] [D] 100 LPH with 1 phase / 3 phase

Raw water pump of 500LPH @ 2.5kg/cm2 - (1 N0 - Kirloskar /CRI/Lubi),

Dual media filter 10" x 54" - (1 No), Micron cartridge filter 20" x 2.5" (1 No),

High pressure pump 500LPH @ 10kg/cm2 - (1 No - Shimge / CRI / Lubi),

RO Membrane housing with RO membrane of 40*40 - (1 No), RO pressure

tube 4" x 1 E - (1 No), 0 - 1200LPH Rotameter -(2 Nos), with Recovery Rate

191 Supplying & erecting approved make low noise decorative exhaust fan 14.00 Nos. 1366.53

having square frame ABS body with inbuilt lowers & square frame. 250mm

with 1350 RPM Cat.II

192 Supplying & erecting approved make low noise decorative exhaust fan 14.00 Nos. 1703.87

having size 200mm with 1350 RPM with square frame ABS body with inbuilt

lowers & square frame.

193 Providing and erecting Sheet Steel powder coated MCB distribution board - 4.00 Nos. 2913.85

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs. (The DBs should be used of same company of

MCB to be used) suitable for (B) three phase incoming and single phase

horizontal type outgoing per phase isolation type (PPI) (b) sheet steel

double door (ii) 6 way.

194 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity

(b) 40 Amp., Cat-III 16.00 Nos. 668.62

195 Providing and erecting Approved make RCCBs conforming to IS: 12640 and 20.00 Nos. 1969.50

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V, 50Hz. having

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component for following Max. rating erected as

directed (i) 25 Amps., Cat-III

196 Providing and erecting Miniature circuit breaker single pole 6A to 25A 72.00 Nos. 112.11

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box confirming to IS 8828/1996 with ISI Mark.

197 Providing and erecting Approved make Four pole moulded case circuit 4.00 Nos. 6173.12

breaker having breaking capacity ICU of 25 KA. at 415 V, having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100%

of ICU only. Cat III

198 Providing and erecting Approved make Four pole moulded case circuit 1.00 ea 16221.61

breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S. housing ICS=100% of ICU

199 Supplying & erecting approved make Four Pole 415V change over switch

interior for panel mounting with operating mechanism A.C.23 duty confirming

It. Item of Work Qty. Unit Rate in Amount

200 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 1.00 Rn. 3202.71

Copper Busbars with four equal Nos. of electrolyte bus having current Mtr.

density not more than 1.6 Amp. / sq.mm (Rated current / cross section area)

duly wrapped with colour insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in existing cubical panel

with necessary connections.(B) Suitable for 200 Amp. capacity

(A) Suitable for 100 Amp. Capacity 0.50 Rn. 1961.42

201 Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories, supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-

charge with erection of supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses / MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos.

of hinged doors, handles with locking arrangement and rubber gasket, heavy

duty end terminal connection,danger notice board, necessary ventilation,

earthing strip complete.

The Panel shall be painted with epoxy powder coating. (The rates excludes 2.75 Sq.mt 14902.55

the cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved

manufacturers with following size. (B) The standard companies switch gear

shall be used and only manufacturers at CPRI approved factory (i) with

202 Providing and erecting Approved make Earth fault Relay suitable to mount

with inter connection suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete erected in existing

203 Supplying and erecting approved make panel mounting type Digital Ammeter 2.00 Nos. 1558.43

having 3 digits LED display, external CT operated, calibrated for 0 to

Amps suitable to operate on 500 Volt AC, erected on existing panel board

with all connection, wiring etc. with manufacturers calibration certificate.

204 Supplying and erecting approved make panel mounting type Digital 2.00 Nos. 1275.63

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring etc. with manufacturers

calibration certificate.

205 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC 4.00 Nos. 317.14

Supply 500 V on existing panel board with necessary connections.

206 Supplying and erecting approved make suitable panel indicator LED type 6.00 Nos. 43.43

lamp, lens cover, complete erected with necessary connections.

207 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 6.00 Nos. 274.72

1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with

insulating materials connected to the meter.

208 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi Mtr.

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required.

(f) One wire 10.00 sq. mm 28.00 Mtr. 91.91

It. Item of Work Qty. Unit Rate in Amount

(h) One wire 25.00 sq. mm 40.00 mtr 236.34

(i) One wire 35.00 sq. mm 8.00 Mtr. 300.98

209 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 1.00 Kg 794.87

210 Supplying & erecting earth pit of minimum bore dia.150mm size approved 2.00 Nos. 4591.46

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and heavy

duty cover. (A) (approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by agency

and officer Incharge has to ensure the value of earthing resistane mentioned

in test certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop :- < 1 volt at no load & dry form, Sulphar content :- <2% (C)

Back fill Compound :- Earthing compound should be capable to retain

moisture for long time necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

211 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables.

(D) 3 1/2 core 70 Sq. mm (35 Sq. mm 1/2 core) 10.00 Mtr. 378.75

(G) 3 1/2 core 150 Sq.mm (70 Sq. mm 1/2 core) 220.00 Mtr. 731.24

212 Providing and fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables..(C) 2 to 4 core 10 Sq. mm

(B) 2 to 4 core 6 Sq. mm 16.00 Each 38.38

213 Providing and fixing heavy duty flange type brass double compression type 2.00 Nos. 103.02

cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc. for following size of cables. (C) 3 & 1/2

214 Providing and fixing approved make Perforated C type cable tray. Made from 20.00 Rmt. 424.20

sheet steel. The cable tray should be single or double bended as per

required and as per IS 2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759 with max 17.5% perforation with coupler

plate / Fish plate and GI hardware like nut - bolt and washers etc. erection

with necessary support (included) as per specification and as per instruction

of engineer in charge. (3) 150 x 50 x 1.6 mm Thick

215 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below 50.00 Nos. 295.93

ground across the road crossing or on floor with necessary material in an

approved manner and making the ground as per original.(D) 250 mm dia.

216 Supplying and erecting LED street light / Flood light fittings with High power 12.00 Nos. 3345.12

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10%, CCT 3000 K to 5700K, Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt. LED driver efficiency > 85%.

(fittings required LM-79 & LM-80 certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown) (A) Street Light

(IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (i) above 36 to 48 watts. Cat-III

It. Item of Work Qty. Unit Rate in Amount

(B) Flood Light (IP-65), Surge -4KV (iv) above 90 to 120 watts, Cat-III 6.00 Nos. 7266.95

217 (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot 10.00 Nos. 4819.72

and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement

for vertical mounting driver and accessories wired upto terminal block.IP

(ii) 32-40W Cat-III.

218 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A 28.00 Nos. 270.68

system and having breaking capacity 10 KA to be erected in existing box

confirming to IS 8828/1996 with ISI Mark

219 Supplying & erecting approved make SMC press moulded composite FRP 16.00 Nos. 476.72

loop-in, loop-out approx. 2mm thick box complete with Bakelite connector

strip 5way (3P+N+E), DIN rail for mounting mob & hinged doors as per

requirement having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable clamps & earth bolt

of following size of box. (c) 150mm x 125mm x 100mm [deep]

220 Providing and erecting Street Light pole bracket comprising main B Class GI 12.00 Nos. 626.20

pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm / required

size of pole top having sufficient fasteners for fixing the brackets and having

spread of 1.5.mtr. length with 110 deg.with vertical plane & suitable welded

stays, reducer and with check nuts complete painted with one coat of red

oxide / PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms. [A] Single Arm Bracket 1.5 Mtr

221 Supplying & erecting Galvanized M.S. pipe post “B” class 88.9 mm O.D. 4 6.00 Nos. 3225.94

mtr. long duly painted with two coats of aluminium paint complete with

metallic base plate of 300 mm x 300 mm x 4mm thick for using as a

compound light pole with approx. weight 32 Kg.

222 Replacing old & u/s Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with high pressure tool

& connected to switchgear terminals with brass/cadmium plated nut bolts in

an approved manner.

223 Solder less crimping type Copper lugs conforming to IS suitable for cable of 84.00 Nos. 8.08

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm

224 Supplying & erecting approved make IP 55 grade Company fabricated Timer 1.00 Nos. 13350.18

Panel of following capacity for switch On-Off street lights on time scheduling

basis made from 16G CRCA sheet duly epoxy power painted inside and

outside with hinged doors and locking arrangement consisting of suitable

size of 4 Pole MCB and 4 pole contactor (Cat-III) with analog time switch,

auto manual switch of same make and suitable input and output Bakelite

terminals and with door earthing approved by Engineer in charge. (b)

225 Making trench in soft soil of suitable width of 90 cms deep for laying cable or 200.00 Mtr. 55.55

locating the fault all over the run and backfilling the same and making the

surface as normal ground.

226 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or 20.00 Mtr. 74.74

required depth for laying any size of cable or locating the fault all over the

run and back filling the same and making the surface as normal ground.

227 Providing & laying approved make Double walled corrugated pipes of 210.00 Mtr. 62.62

polyethylene (conforming to IS 14930 II) with necessary connecting

accessories of same material at required depth for laying of cable below

ground / road surface for enclosing cable and back filling the same to make

ground as per original. (A) 50 mm dia.

It. Item of Work Qty. Unit Rate in Amount

(D) 120 mm outer dia. 110.00 Mtr 137.36

228 Supply, Installation, Testing & Commissioning of following size of Grid Tied

Solar Power Plant with Solar Panels (ALMM approved): Frame Material :

Anodized Aluminum alloy Frame With Twin Wall Profile, Front Cover : High

Transmission Low-Iron Tempered Glass (AR Coated), High efficency and

positive power tolerance Pmax: 0/+5, Module Efficiency should be approx.

19.5%-22%, Normal operating temperature 45'C, Junction Box with

Waterproof IP67 & MC4 Compatible and Enclosed with Bypass diodes,

100% Electro luminescence test to ensure error free Modules, Thep. temp.

co-efficient of the PV module shall equal or better than -0.45%/degree C.

Solar PV modules of minimum fill factor 75% to be used. Unit Production:-

More than 4.5 Unit /kw /day (Actual) (1Year Avg) With 10 year Product

warranty and 25 year Linear Power Warranty includes all mechanical and

electrical parameters of the Solar panel. Modules must be complied to the

DCR(Domestic content requirements). The Ration of AC to DC is 5:6 for the

Installation capacity which are given in AC KW.Solar Inverter: MPPT Range:

MPPT Range: 80-1000 V,

Max efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude

(m) ≤4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture

Range: -25~60°C, Integrated protection of Inverter are Anti-islanding

Protection, Input Reverse Polarity Protection, Insulation Resistor Detection,

Ground fault protection, Residual Current Monitoring Unit, Output Over

Current Protection, Output Short Circuit Protection, Output Over Voltage

Protection, PV array string fault Protection. Protection Degree: IP65, User

Interface LCD & APP, Datalogger & Communication: GPRS / Wi-Fi.

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output

Over Current Protection Integrated, Output Short Circuit Protection

Integrated, Output Over Voltage Protection Integrated, Protection Degree:

IP65, User Interface LCD & APP, Datalogger & Communication: GPRS / Wi-

Fi, Module Mounting Structure: The mounting (Rectangular pipe / square

pipe / circular pipe) with requisite cross bars, nuts and bolts, etc. shall be Hot

deep galvanized with minimum 80micron coating.

The Rectangular / square /circular hollow pipe section used for the structure

should have a minimum thickness of 2.0 mm. other than above, the material

thickness should be minimum 2.5 mm. A certificate of a structural engineer

certifying the strength and stability of the mounting structure to withstand the

weight and wind speed of 150 km/hour throughout the life span of 25 years

of the system, shall be submitted by the vendors. Hot Dipped Galvanized

steel coils. suitable arrangement for base plate for foundation , solar panel

mounting, the structure should be suitable for carry the load of solar

panel,wiring, sprinkler system etc. with necessary foundation work/wall

mount, j bolt, anchor fastner etc. the nut bolt used for installtion of stucture

should be (SS 304) quality.The ground clearance of the bottom most edge of

solar panel shall not be less than 300 mm to 1200 mm or as per site’s

technical / feasibility requirement.

a. Column –The minimum section (thickness) should be 60MM x 40MMb.

Rafter - The minimum section (thickness) should be 60MM x 40MM c. Purlin -

The minimum section (thickness) should be 40MM x 40MM alane of System

with necessary Swichgears (Suitabel size and protection of ACDB & DCDB),

inter connecting wiring, earthing system as per the CEIG drawing approval,

lightining arrester system as per the CEIG drawing approval, all liasoning

work with various gov. dipartment like state nodal agency, DISCOM & CEIG

is included in agency scope.

(Excluding All charges namely GEDA Application fees, Solar connectivity

charges, Meter connectivity charges, Meter testing charges and system

stability / strenthning charges)

229 (B) Grid Tied Solar Power System: 7 - 10 kW (3 - phase) 10.00 Kw 44081.45

It. Item of Work Qty. Unit Rate in Amount

230 Providing Approved make Triple Pole Metal Clad Switch Fuse Unit 415/500 1.00 No. 8012.33

V. with HRC fuse of suitable load and neutral link confirming to IS (b) (a)

i.e. Rs. Two Crore Fifty Three lacs Eighty Seven thousand Two hundred Fourty Seven and Ninety Four paisa only.

I/We am/are willing to carry out Deputy Executive

the work Divisional

@ _______ __ %Accountants Officer

above/below Executive

percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as

directed and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

M.S. building Sub Division, City (R & B) Division, City (R & B) Division,

Vadodara Vadodara Vadodara