IMPROVEMENT UPGRADATION OF LIVING IN AIRMEN BILLET AND MESS BUILDING NO P 35 AT 15 BRD UNDER GE AF CHILODA

Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down and refixing shutters of any description exc 1 sqm and n exc 2 sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed by Engr-in-Charge.

S&F in repair framed work as in door frames or gates chowkats of angle or other section with braces, etc., complete, drilled or welded for ms hinges for fixing of gate or doors other covering and also fastening and fixing complete all as specified and directed by Engr-in-Charge.

S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel designed with 2 mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete all as specified & directed by Engr-in-Charge.

M&L for factory made 35 mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (with shash bar) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats and directed by Engr-. in Charge.

M&L for 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated and all as Specified and as directed by Engineer- in -Charge.

M&L for 2nd class hard wood factory made 35mm thick Plain framed, panelled shutter (Single/double panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both face.The size of rail and style as per IS:1003(Part-I), klin seasoned and chemically pressed treated and all as Specified and as directed by Engineer- in -Charge.

M&L for aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm, bottom size 92x31.75x1.50 mm and shutter top & bottom of size 40x18x1.50 mm and sides (handle) of size 40x18x1.50 mm and lock side shutter frame of size 40x18x1.50 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete with and including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples with and including fixing 4 mm thick glass with necessary rubber beading gasket etc, one wire mesh shutter and and two nos glass shutter as per drawing No CEAA/STD/01/2010 sheet No 1/1 complete all as specified and as directed by Engr-in-Charge.

S&F aluminium ventilator powder coated (requried colour to match window colour), louvers type, frame top & bottom of size 31x42x1.50 mm (rectangular tub of size 40x20x2mm (and middle vertical of size 42x46.20x1.50 mm Section and clip for fixing wire mesh and glass of size 19x17.30x0.90 mm thick with and including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40 mm average width of aperture and fixed with stainless steel wire staples and with and including fixing 4 mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc all as specified and as directed by Engineer-in-Charge.

S&F Powder coated (thickness of powder coating minimum 50 micron) anodised aluminium frame for doors, windows, ventilators & partition etc., with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated (thickness of powder coating minimum 50 micron) Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, 3 Nos hinges, tower bolts 2 Nos in each door anodised aluminum snap beading screws with fixing of glass/jalli etc. complete all as specified complete all as specified and directed. Note :- Wire cloth & Glass pane shall be measured and paid separately relevant items.

S&F Powder coated (thickness of powder coating minimum 50 micron) anodised aluminium window and ventilator shutters, side hung without sash bars, aluminium sections weighing 0.55 kg/m & including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 No.), suitable handle (1 No), with fixing of glass/wire cloth complete all as specified and directed. Note :- Wire cloth & Glass pane shall be measured and paid separately under relevant items.

Supply, fabricated & fixing Powder coated (thickness of powder coating minimum 50 micron) anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S&F in repair Aluminium (die cast ) body , Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair Aluminium Mortice lock 4 levers, vertical type, size 100 mm for Aluminium doors complete all as specified and directed by Engr-in-Charge.

S&F 100 mm long SS butt hinges and fixed to frame with scrwewd or welding / gas welding complete all as specified and directed by Engr-in-Charge.

S&F for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed.

S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and directed in Engineer -in -Charge.

S&F for 150mm long Extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed by Engineer-in-Charge.

S&F 150mm long Floor door stopper of alunium body and tongue, with hard drawn steel spring, fixed to bottom of door shutter complete all as specified and directed by Engr-in-Charge.

S&F in 300mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

Supply only 4 mm thick sheet glass ordinary quality, cut to size as required at site, complete all as specified and directed by Engr-in-Charge. (Cost of fixing of glass shall be deemed included in the unit rates under respective items.)

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or teak wood beading for wooden doors etc

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or teak wood beading for wooden doors etc complete all as specified and directed by Engr-in-Charge.

S&F Aluminium composit panel sheet 3mm thick as in cladding , aluminium doors and partitions etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed by Engr-in-Charge.

M&L for painting at old wooden painted surface of any description over 10cm width or grith not otherwise described including preparation , of surface and two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, any thickness incl hooks and ridge as retrieved from site complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/plain steel sheet, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, wall cladding etc, fixed to iron/wooden members with self drilling zincoulium coated metal screws having cap with rubber and metal washers, complete all as specified and directed by Engr-in-Charge.

S&F in repair 25 mm dia Stainless steel curtain rod with and including two nos of bracket/holders suitable for drapery 25 mm dia rods of one window / door openings complete all as specified and as directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for anodised aluminium snap grid frame work of size (605mm X 605mm ) using T grid/Cross-T/Wall angle/level clip & suspenders for false ceiling and similar works including hangers 6mm dia. G.I. wire (upto 1200 mm length) size of grid (605 mm X 605 mm ) adjusting level fixed to roof slabs/trusses by means of ceiling cleats made out of G.I.flat 40 x 3 mm size 60 mm long and expansion hold fastener 12.5mm dia 40mm long complete and supply and fix 12 mm thick gypsum tiles (600mm x 600 mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film fixed complete all as specified and as directed by Engineer-in-Charge.

S&F false ceiling sheet size of 595x595x12 mm mineral fibre ceiling tiles complete all as specified and directed by Engr-in-Charge.

S&F Soild PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engr-in-Charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed by Engr-in-Charge.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid and bedded on pointed on any mortar complete all as specified and directed by Engr-in-Charge.

M&L for single piece of green marble slab 15-18 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Marble slab including moulding,cutting and polishing and nosing and polishing of the free or front edge of the slab window cills etc and including 15mm thick backing coat in CM 1:4 all as specified and directed in Engineer -in -Charge.

M&L for granite work (of any type) 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc all as specified and directed in Engineer -in -Charge.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the permises.

M&L for 15 mm thick screed bed or bedding layer of morter for laying floor finishes in CM 1:6. complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic light coloured tiles 9-10mm thick (square/Rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic light coloured tiles 9-10mm thick (square/Rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified.

M&L for non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L glazed ceramic coloured digital tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of CM 1:4, 10mm thick etc all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20 - 25mm thick over cement mortar 15mm (1:6) screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including backing coat all as specified and directed by Engr-in-Charge.

M/L for 15-18mm machine cut Pre- polished kota stone slab in single piece with round nosing with three numbers of serration as in treads of steps for staircase laid over cement screed bed and jointed with grey cement slurry mixed with pigment to match the shade of of the slab including rubbing and mirror polishing complete all as specified and as directed by EIC over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M & L for machine cut Pre polished kota stone 16-18 mm thick (single peice in riser of steps), skirting, dado and pillar laid and jointed with grey cement slurry including cutting and mirror polishing over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed by Engr-in-Charge.

M&L for cutting/grinding of the existing Terrazo/Marble/Kota stone flooring by mechnical process using carborundum stone of appropriate grit,cleaning and finally mirror polishing by applying wax polish complete all as specified and directed by Engr-in-Charge.

Demolition of wall of brick and stone wall built in cement mortor incl all quoins, archs, pillars,etc all as specified.

M&L for Half brick work sub class B bricks old size, straight or curved on plan to any radius built in half brick thick walls in CM 1:4 all as specified and directed by Engr-in-Charge.

M&L for brick work sub class B bricks Old size, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (reinforced) of roofs (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge.

M&L for mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) n less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for reinforced cement concrete (nominal mix) Type B-1 1:2:4 (using 20mm garded stone aggregate) as in as slab suspended slab, shelves , plateform and the like complete all as specified and directed

M&L for providing RCC nominal mix type B0 1:2:4 using 12.5 mm graded agggregate as in chajjas , parapets , fascias etc complete all as specified and directed by Engr-in-Charge.

M&L for formworks to sides and sofits of shelves, plateform and like rough finished surface of concrete complete all as specified and directed

M&L for Formwork to chullah hoods , chajjas , troughs , parapets , fascias and similar items including edges to achieve fair finished surfaces of concrete complete all as specified and directed by Engr-in-Charge.

M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified. (Reinforcement shall be measured and paid for separately).

Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc complete all as specified and directed

M&L for rendering 10 mm thick on fair faces of concrete or brick masonary CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed

M&L for rendering 10 mm thick on fair faces of concrete or brick masonary CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed

M&L for rendering 10 mm thick CM 1:6 and setting coat 5 mm thick CM 1:4 with WPC finished even and smooth (without using extra cement) in wall including scaffolding complete all as specified and directed (WPC shall be measured and paid seprately)

M&L for rendering 5 mm thick in ceiling surfaces.CM 1:4 finished even and smooth (without using extra cement) complete all as specified and directed by Engr-in-Charge.

Taking out existing unserviceable plaster, loose unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/ RCC facia/ beams/ columns/ RCC chajja, average depth 20 mm (approximate 6.5 mtrs height from natural GL) with chiesel and removal of debries upto a distence 500 mtrs out side MD land including saw cutting of all edges, making square shoulders of cavaties and roughening of smooth surface, scraping out and removing corrosion and all loose scales, rust etc. from the visible reinforcement and cleaning the steel reinforecement properly providing Zink primer on visible reinforcement surface to form a contineous film and preparing the surface to recive concrete of epoxy grouting mortar etc. including providing necessary scaffolding complete all as specified and directed by Engr-in-Charge.

M&L for applying bonding coat of modified styrene butadene emulsion in proportion 1 part (bonding agent) : 1 part (water) : 3 part (OP cement) by volume with the brushes etc. to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with old surface including removal of loose/ distengrated old concrete/ plaster including preparation of surface etc. complete all as specified and directed by Engr-in-Charge.

S&F wire netting of galvanised steel wire 1.40mm dia with 20mm size of mess fixed with tinned tacks of wire staples complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment of wall surface and applying two coats of distemper oil emulsion over a coat of primer and 1 mm thick coat of wall care putty. complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer and 1 mm thick coat of wall care putty. complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surface of wall and applying three coats of whitewash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surface of wall and applying two coats of weather proof acrylic paint over a coat of primer.

M&L for complete removal of existing treatment of wall surface and applying two coats of weather proof acrylic paint over a coat of primer in old surface of wall and filling cracks with white cement etc complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash all as specified.

M&L for preparation of old surface of ceiling and applying two coats of white wash all as specified.

Demolition of cement concrete(unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above G.L)

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (20mm graded aggregate) as in plinth protection and Finishing cement concrete surface even and fair with brooming and every 2mtr constrction joint to be provided and filled with bitumen with saw dust complete all as secified and directed.

M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as insub base complete all as specified and directed

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed

Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store all as directed.

Taking up or down 20mm dia steel tubing and connection including cleaning for refixing or removal to store all as directed.

S&F of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on WALLS / CEILING complete all as specified. supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete.

S&F of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on WALLS / CEILING complete all as specified. supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete.

M&L for Labour for cutting chases,in brick walls pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of andings steps, cills sunshades, shelves lintels etc and cutting chases for concealed water tubing and making good cutting not exc 10 cm grith

Re-fixing old 15mm/20mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required complete.

S&F in repair Fancy type long body CP bib tap 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed .

S&F in repair Fancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed. complete all as specified and directed

S&F in repair, two way angle valve cock chromium plated fancy type bore 15mm.

S&F in repair Fancy type CP stop valve 15mm dia cast copper alloy, chromium plated fency type with long shank and cup (concealed type) screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed.complete all as specified and directed

S&F in repair 20mm bore stop valve/gate valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 75 mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and directed.

S&F in repair vitreous china wash hand basin oval type over /under counter wash basin 560x470mmx 190mm of Ivory colour complete all as specified and directed.

S&F in repair 15 mm dia pillar taps Fancy type of Chromoum Plated brass with half turn type capstan heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and directed.

S&F in repair Viterous China urinals, half stall type (back to corner wall type), complete including providing and fixing plus, beding urinal agianst wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing aroiund urinal back in cement; complete all as specified and directed.

S&F in repair PVC waste pipe of 32 mm dia for wash basin/sink complete all as specified and directed

S&F waste coupling of 32 mm dia brass CP for sink/ basins/Urinals, etc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed. complete all as specified and directed

S&F waste coupling of 40 mm dia brass CP for sink/ basins, etc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed. complete all as specified and directed

S&F in repair 125 mm dia Fancy type CP shawer rose all as specified and as directed by Engineer-in-Charge.

S&F in repair SS soap dish of size 100mm complete all as specified and directed by Engineer-in-Charge.

S&F in towel ring of brass CP & including Chromium plated brass screws & wooden / plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F PVC cabinet with mirror of size 300mmx450mm all as specified and directed by Engineer-in-Charge

S&F in repair vitreous china wash down water closet pan pedestal pattern ,white excluding fixing cistern and flush pipe trap front or back inlet including seat cover of any pattern and health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete. Make :Cera /Hindustan/Parryware

S & F in repair vitreous china squatting pan 'Orissa pattern of size 580 x 440 mm white with integral foot rest( excluding flushing cistern and flush pipe) squatting pan including connecting to 'P' trap and to flushing pipe complete.

S&F in repair PVC valveless, syphonic action type flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including bracket, complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long including brackets/flanges completed all as specified and directed.

S&F PVC water connection 450 mm long to wash basin of 15mm dia including CP nuts and washers all as specified and as directed by Engineer-in-Charge..

Supply and fixing in repair toilet paper holder chromium plated as per sample appproved by GE.

S & F mild steel chromium plated grating doom 100mm dia with or without hole complete

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm

S&F in repair double bowl sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 1143mm x 508mm x 228mm bowl size 508mm x 406mm complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel 1 mm thick plate rack of size 750x600x250mm of approved make including taking down old wooden plate rack complete all as specified and directed.

Supply & fixed in repair CP peg set of six as per sample approved by Engineer-in-charge

S&F in repair for solid PVC kitchen cabinets/cupboards frame/shutters made with 16-18 mm thick Wooden plastic composit (WPC) boards one side laminated and other side white complete all as specified and as directed by Engineer-in-Charge.

S&F CP decorative type SS handles 75mm long fixed to PVC sheet or frame all as directed by Engineer-in- Charge.

S&F magnetic and connected plate to shutter and frame as per sample complete all as specified and directed.

S & F auto close hinges , stainless steel , bright finish or electro galvanised fixed complete all as specified

S&F door seal strips strong rubber 3 ft long weather stripping door at bottom

S&F in repair for glass corner shelf 12 x 12 inch wall mount with 5mm thickness with SS railling complete incl bolt/bracket for securing to wall all as specified and as directed by Engineer-in-Charge.

Removing of existing unserviceable water proofing treatment including PCC tiles (except PCC padding) taking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises out side MD land.

Dismantling of un-reinforcement lime concrete/cement concrete in padding to roof slab and removing the rubbish off premisesout side MD land all as directed.

M&L for providing cement concrete type B-0, 1:2:4 using 12.50mm graded aggregate laid to slope in padding for WPT over roof slab complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick in CM 1:4, mixed with WPC @3% by weight of cement on fair faces of concrete surfaces without using extra cement as in roof complete all as specified and directed. Note:- WPC shall be measured & paid separately.

M&L for preparing clean and dried plastered surface and applying a coat of oil based bitumen primer conforming to IS 3384-1986 @ 0.30 litrs/sqm and then laying APP polymer modified membrane 3.5mm thick with non woven polyster reinforced membrane (min 3.50 kg/sqm) having thermal insulation with white mineral gravel finish on upper side of membrane and laid by torch application method to the entire surface all as specified and directed by Engineer in Charge.

Supply only intergral water proofing compound. ISI marked

Dismantling water tanks and exc. 500 but n. exc. 1000 litre capacity complete all as specified and as directed.

M&L for removing the tank over roof and re-fixing in the same position including cleaning all as specified and as directed.

S&F rotational moulded water storage tank 750 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F rotational moulded water storage tank 5000 ltr capacity triple layer , white colour (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F 20 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repair 20mm dia (min weight 210 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, frame work for cooler stands , water tank cagings , angle iron frame works , steel ladders , vertical posts , balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Welded steel wire fabric supplied and fixed complete to steel members of weight not exceeding 4 kg per sqm complete all as specified and directed by Engr-in-Charge.

S&F 125mm long heavy weight cold rolled mild steel hinges and fixed to frame with screwed or welding complete all as specified and directed.

M&L for painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation , priming with zinc chromate and two coats of synthetic enamel paint complete.

M&L for painting to old steel surface of any description over 10cm width or grith not otherwise described and applying two coats of synthetic enamel paint complete.

Taking down PVC pipe (SWR) 110mm dia bore and connection complete.

Taking down PVC pipe (SWR) 75 mm dia bore and connection complete.

S&F 75 mm dia bore pipe (SWR) single socket in any length rubber joints fixed to wall or laid in floors etc complete all as specified and directed

S&F 110 mm dia bore pipe (SWR) single socket in any length rubber joints fixed to wall. or laid in floors etc complete all as specified and directed

S&F 110mm bore PVC (SWR) bends any radius with access door.

S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius with acess door.

S&F 110mm bore PVC (SWR) cowl any radius.

S&F 75mm bore PVC (SWR) bends any radius with access door.

S&F 75mm bore PVC (SWR) junction single, (single T) equal or unequal any radius with acess door.

S&F 75mm bore PVC (SWR) cowl any radius.

S & F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 75 mm bore pipes

S & F Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 110 mm bore pipes

Excavating in trenches in any type of soil, n.exc. 1.5m wide and n.exc 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out in soft / loose soil.

Demolition and breaking up drain pipes, 200 mm internal dia (Salt glazed stoneware, AC or reinforced concrete) (internal dia) set in cement mortar including haunching and bed concrete.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engr-in-Charge..

M&L for RCC NP2 class drain pipes of 200 mm internal dia, laid to slope in trenches, jointed in CM 1:1 and tested complete all as specified and as directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm.

Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point.

M&L for cutting into existing manholes for connecting new drains of 150/200 mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

S&F PVC coated heavy duty GI wire rope including all fittings and fixtures for drying cloths or for binding mosquito nets all as specified and directed.

S&F wall/ceiling mounted heavy duty retractable clothesline for wet weather drying complete all as specified and directed

M & L for concealed point wiring complete with PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100volt grade FRLSH , along with one single core of same size stranded copper as continuous earth wire to common earth dolly in and including PVC conduit pipe fitting medium grade suitable size fixed in concealed surface of wall/ceiling/false ceiling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0mm thick laminated sheet where as required and accessories complete suitable incl taking down old us point for the following :-

(a) One light/fan point controlled by one, one way switch

(b) One socket outlet 05 Amps on the same board

(c) One socket outlet 05 Amps on independent board

(d) One bell point controlled by one bell push

(e) Two way light point

(f) One light/fan point controlled by one on way switch but not incl taking down old us point

(g) One socket outlet 05 Amps on the same board but not inch taking down old us point

(h) One socket outlet 05 Amps on independent board but not incl taking down old us point

-Ditto- as per item No. 159 above but point wiring with 2.5 Sqmm cable FRLSH and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket and all as specified and directed.

-Ditto- as per item No. 159 above but point wiring with 2.5 Sqmm cable and 2.5 Sqmm FRLSH earth continuity conductor for 3 pin 15 Amp socket and all as specified and directed but not incl taking down old us point

S&F Switch piano, single pole one way 5 Amps 240 volt capacity flush type all as specified.

S&F Switch flush type , 05 Amp single pole , two way.

S&F 3 pin 5 Amps Socket outlet , flush type and all as specified and directed.

S&F Bell push piano type, single pole one way 5 Amps 240 volts capacity flush type all as directed.

S &F an electric bell ding dong AC 230 volt single pole all as specified.

S&F 5 pin, 5 Amps switch & socket combination flush type multipurpose 3 pin, 5 Amp flush type universal and all as specified and directed.

Supply and fix 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) all as specified.

S&F Switch piano, single pole one way 15 Amps 240 volt capacity flush type all as specified.

S&F 6 pin 15 Amps Socket outlet , flush type and all as specified and directed.

S&F fan regulator electronic step type 230 volts switch type suitable for any type of ceiling fan sweep all as specified and directed.

S& F ceiling rose with cover plate , 5 Amps surface type 240 volts Bakelite three terminal as specified and directed .

S&F in replacement 4 way sheet metal enclosure for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed

S&F in replacement 8 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed

dito - all as per item no 174 above but 4 way 415 volts TPN DB

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

(a) SP 5 To 32 AMP

(b) SPN 40 to 63 AMP

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete TPN 40 to 100 AMP capacity of 'C' Curve with connection testing and commissioning complete all as specified and directed.

S & F in repair of LED batten fitting along with removable LED Tube 20W, 230 Volt, wall /ceiling mounted ,LED batten fixed by means of bolts, ABS rotor suitable for single side connections. LED rod having glass material complete having lumen efficacy minimum 100 lm/w,CCT 6500 K, CRI>80 ,burning hour minimum 25000,PF - 0.9 powered by integral constant current driver suitable for 230 V AC with all accessories internally prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.Incl taking down old u/s one.

Supply and fix in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type100 lm/w,CCT 6500 K, CRI>80 ,burning hour minimum 25000, PF - 0.9, with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete Incl taking down old u/s one.

Supply and fix in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type complete.

Supply and fix in replacement LED wall mounted light fitting, easy to adjust goose neck arm long life premium aluminium material and white finish 3 watt 220 V AC single phase complete.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm incl making necessary hole. Incl all electrical connection complete all as specified and directed.

Supply and fix exhaust fan made of steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers incl making necessary hole Incl all electrical connection complete all as specified and directed.

Ditto- item 183 above but of size 450 mm sweep heavy duty complete.

Supply and fix Water heater storage type, electric, capacity 25 litres. BEE 5 star rated including suitable size and length of PVC connection for hot & cold water and fixing arrangement complete with necessary fastener and nut bolts washer etc Incl all electrical connection complete all as specified and directed.

M&L for PVC box flush mounted 100mm x 100 mm x 100mm having holes for 20mm conduit entry including 2 pin TV socket outlet flush type duly marked with symbol of TV and 3 mm thick plastic laminated sheet cover complete for connection all as specified

M&L for Rigid non-metallic PVC conduit of size 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete, all as specified.

M&L for concealed sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLSH, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit pipe 25 mm dia medium grade and accessories of suitable size and fixed on concealed surface of wall/ceiling with cutting chases for conduit including one run of 4.0 Sqmm single core PVC insulated, FRLSH , flexible copper cable as earth continuity conductor in green colour all as specified and as directed. Note- (a) Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit). (b) Make disturbed surface good to wall/floors .

Ditto- as per item 188 above but with 6 sqmm

M & L for taking down of ceiling fan and depositing to MES store yard including replacement 02 core size 0.75 Sqmm copper wire, painting, servicing and marking of MES number and refixing the same on same position after the work is complete all as specified and as directed.

M&L for painting of panel box installed at bldg stair with synthetic enamel paint of existing colour one coat, over a coat of primer complete all as specified and directed..

M & L for taking down of geyser 25 ltr capacity and refixing the same on same position after the work is complete all as specified and as directed. including all electrical connection complete all as specified and directed.

M & L for carefully taking down and refixing serviceable only against item No 173 to 175 MCB SP/SPN existing rated and electrical connection all as specified and directed.

Supply and fix round shape 12 watt COB 220 volts AC CCT 6500K recessed type light fitting with high efficiency light complete including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F flexible LED strip 5 watt suitable for cove lightening and indirect lightening CCT 6500K RGB type LED strip light 12 v IP20 60 LED Incl all electrical connection complete all as specified and directed.

S & F SMPS 12 volt flexible LED strip 5 watt, led strip light 12 v IP20 60 LED RGB .

Supply and fixing in replacement round shape recess mounted LED fitting cap 10/12 watt 220 volts AC recessed type complete.

Supply and fixing (BLDC) ceiling fan complete with blades down rods ,with remote control unit with battery 02 Nos and accessories 230 Volt 1200 mm sweep min air delivery 240 cum/min with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specified and directed by Engr-in-Charge.

Supplying and fixing Smart fan down rod (anti suicide fan rod) 15'' to 18" length

Supply and fix Smart fan down rod (anti suicide fan rod) 30" length complete all as specified and directed by Engr-in-Charge.

Supply and fix fly catcher scorpion glue pad machine wall mounted type PVC body of size 525 (L) x95 (W) x335 (H)mm, glue pad type,(tubes UVA 18"/15W-03 no's) power consumption 45 watt complete including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

M & L for taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) incl refixing the same after complete the work all as specified and directed.

Supply and fix Air circulator fans 230 volts single phase oscillating 450 mm sweep almonard industrial type suitable for wall mounting complete all as specified and as directed.

M&L for concealed sub main wiring of two run with 4.0 Sqmm single core PVC insulated, FRLSH flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit and accessories of suitable size and fixed on concealed surface of wall/ceiling with cutting chases where required including one run of 4.0Sqmm single core PVC insulated, FRLSH, flexible copper cable as earth continuity conductor in green color all as specified and as directed. Note : Two runs of main wire, one run of earth wire & one run of PVC conduit shall be measured and paid as one unit.

S& F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp

Supply, testing and commissioning of single Phase 230 volt, 950 RPM ,50 Hz, evaporator type water cooled Air Cooler, pre painted steel body with honeycomb cooling pad, aluminum fan having capacity of and water tank capacity 70 Ltr, capacity of air flow shall be 6000 CMH and product dimension 1220x620x 670 mm, auto louver swing with required knob complete ail as specified and directed by Engr-in-charge.

Supply, installation, commissioning of Glass Top Deep Freezer single phase 240 volt (single phase), capacity 320 Litres BEE 5 star rated incl all electrical connection complete all as specified and directed.

Supply and install water dispenser electric driven single phase having cooling capacity 3 Itrs/hr and tank capacity of 3.4 Itrs, heating capacity 6 ltrs/hr and tank capacity 1.6 ltrs, Working in R- 134a refrigerant.

Supply, installation, commissioning of Water cooler fully stainless Steel, electric driven Single phase having storage capacity of 150 Ltrs and nominal cooling capacity of 120 ltr per hour incl all electrical connection complete all as specified and directed

M&L for carefully taking down and refixing split ac 1.5/2.0 TR incl fixing assy and electrical connection all as specified and directed

Supply, laying and testing in replacement of cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core

S&F in replacement V-TPN 8 ways MCCB I-C 100 A assessable sheet metal enclosures for flush/surface mounting distribution board double door, 415 volts factory ade and tested complete all as specified and directed.

S&F in replacement of miniature circuit breaker (MCB) of single poles and current carrying capacity 32 AMP 240V, 10 KA ‘B’ curve, in the DB Complete with connection all as specified and directed.

S & F in replacement MCCBs 415V, 16 KA, 4 Pole capacity 100 amp. complete all as specified and directed by Engr-in-Charge.

S & F in replacement earthing complete with galvanized iron earth plate electrode 600mm x 600mmx6mm thick, buried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5m below ground level connected with gavanised iron strip 25x4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanized iron pipe of 40mm bore (Med grade) and other end connected to earthing test point or lightning arrester main controlling switch as directed including providing funnel with 20 mm bore galvanized iron pipe (med grade) wire mesh charcoal or coke and common salt in alternate layer of 15 cm (compacted thickness) all round the earth electrode, concreate earth pit in PCC (1:3:5) type C-1 (with 20 mm grade aggrate). 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8 mm dia TMT bar @ 15 cm C/C. complete all as specified and directed by Engr-in-Charge.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, laying of pipe/ cable etc. or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sq mm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick using excavated soil all as directed.

Removing excavated soil to distance n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point all as directed.

Material and labour for boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique/ manually and necessary machine complete all as specified and as directed.

Supply and laying of DWC HDPE pipe of SN4 category conforming to IS 14930 part I and II including accessories like HDPE snap fit coupler with neaoprene ‘O’ rong of 40 mm size.

Supply and installed in replacement cubicle compartment outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.0 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC and consisting of the following:-

Incoming (a) Bus bar chamber having 4 aluminium Bus bar strip 450 A capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 300 Amps with rupturing capacity 36 KA 01 No (c) LED display 3 line Multimeter (d) LED RYB Phase indicator -01. Outgoing (a) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 100 Amps with rupturing capacity 16KA 03 Nos. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 63 Amps with rupturing capacity 16kA 03 Nos (b) MCB TPN, 63 Amps -02 Nos (c) Space for 01 Nos of spare MCCB.

S&F in replacement of LED post top 40 watt (Smart G-3 type) with decorative circular design compiant to dark sky norms with polycarbonate opal diffuser and IP 65/IK-10 protection installed with suitable dia and 3 mtr length powder coated metal pipe complete with all fixing arrangement incl all electrical connection complete all as specified and directed.

S&F in replacement PVC 1.5 sqmm 3 core PVC insulated cable copper (FRLSH) drawn through PVC conduit from light terminal complete all as specified.

Please Enable Macros to View BoQ information