Augmentation Retrofitting of LWSS Kot Dehra Hatwar in Ghumarwin Constituency to Provide Functional Household Tap Connection FHTC to leftout households Under Jal Jeevan Mission Har Ghar Nal Se Jal

Amount

Excavation in foundation and trenches etc.(including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming and dressing where ever required including restoration of un-metalled/metalled/paved surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respect.

Pick jumper work

Cutting in earth work and disposal of excavated earth in all kind of soil upto a lead of 20 meters in all kinds of soil complete in all respect and to the entire stisfaction of Engineer in charge.

Providing and laying cement concrete 1:6:12 ( 1 cement: 6 sand:12 graded stone agg.40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all depths and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying cement concrete 1:5:10 (1cement:5 sand:10 graded stone aggregate 40 mm nominal size with 15% plum and curing complete excluding the cost of form work in retaining wall/ breast wall. The size of plum shall usually be 150mm to 300mm in all respect and as per direction and entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:4:8 ( 1 cement:4 sand: 8 stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts complete in all respect and as direction by the Engineer-in-charge.

Providing and laying cement concrete 1:3:6 (1 cement:3 sand: 6 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth.

Providing and laying cement concrete 1:2:4 (1cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work in foundatioin and plinth in all leads and lifts.

Foundation footing bases of columns and the like and mass concrete with in all leads and lifts and to the entire satisfaction of Engineer in charge.

Suspended floor, roofs, landing shelves and their supports balconies, beams, girders bressumers and cantilevers etc. up to all floor level in all leads and lifts.

Wall (any thickness but not less than 0.10 metres thickness) attached pillasters, buttresses plinth & string courses etc. from top of foundation level up to floor two level.

Providing and laying cement concrete 1:1½:3 ( 1 cement: 1½ sand:3 graded stone agg. 20mm nominal size) & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :-

Foundation footings bases of columns and the like & mass concrete.

Wall (any thickness but not less than 0.10 metres thickness) attached pillasters, buttresses plinth & string courses etc. from top of foundation level up to floor two level.

Suspended floors, roofs landings and shelves & their support balconies, beams, girders, bressumers & cantilevers up to floor two level.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a rough finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in situ reinforced concrete and plain concrete work in:-

Vertical surfaces such as walls (any thickness) portions and the like including attached pilasters buttresses, plinth and string courses and the like in all leads and lifts.

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto 200mm in thickness as per direction and to the entire satisfaction of the Engineer-in-Charge.

Foundation footing bases of columns and the like and mass concrete and to the entire satisfaction of the Engineer in charge.

Sides and Sofits of beams, beams haunchings, cantilivers, girders,bressumers and lintels exceeding 1 metre depth.

Providing RCC work smooth finishing of the exposed surfaces with cement mortor 1:3 ( 1 cement:3 sand) in all respect with in all leads and lifts

Providing mild steel/tor steel reinforcement for RCC work including cutting bending, binding and placing in position complete upto floor two level.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting and fixing in position and applying a priming coat of red lead paint in grating,framed,guards, bars,ladders, ralling brackets and similar works and to the entire satisfaction of the Engineer-in- charge.

Laying ,jointing and testing in trenches galvanised mild steel tube fittings of light grade screwed and socketted complete with tube fittings such as bends,tees,air valves, etc. of following dia complete as per direction and to the entire satisfaction of Engineer-in charge.

80mm dia

Providing and fixing double flanged cast iron sluice valve of following dia and class as per IS:14846 (PN-I.00) Leader/Kirloskar/Kartar/Pelicon make including MS flange of Table-5 as per IS: 6392-1971 with welding of MS flanges in requisite layer on both faces including carriage complete in all respect with in all leads and lifts and to the entire satisfaction of Engineer in charge.

80mm dia

Providing & Fixing of Man hole cover (size 680X680) with M.S sheet 2.00 mm thick with hinges on MS. angle iron frame 35x35x3mm supporting with 25x5mm MS flat with base frame 40x40x5mm duly welded and fixed in RCC slab with anchor bolt 12mmx150mm i/c cost of welding charges,carriage fixing and applying priming coat and locking arrangement complete in all respect as per entired satisfiction of engineer in charge.

Providing form work ordinary timber plankings so as to give a rough finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in situ reinforced concrete and plain concrete work in:-

Arches beyond 6 mtrs span.

Randum rubble masonary/ polygonal rubble masonary (uncoursed brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 sand : 12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6 (1: cement :6 Sand) with in all leads and lifts.

Brick work using common burnt clay building bricks with cement mortar 1:6 (1 cement: 6 sand) in superstructure above GL to Ist Floor level (IInd class) brick in all leads and lifts.

Half brick masonry using common burnt clay building bricks in super structure in cement mortar 1:4 (1 cement: 4 sand) of 2nd class bricks above plinth level in square and rectananglar within all leads and lifts complete in all respect.

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thick including hinges, jump lock jamb, beed & if required angle thresheld of mild steel angle of section 50x25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechaanical means, adjustable lugs with split & tails to each jamb including steel butt hinges 2.5 mm thick with gaurds, lock strike plare & shock as specified & applying a coat of approved steel primer after pre treatment of the surface as directed by the Engineer in charge. Profile A.

Providing and fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including bright finished black enamelled iron butt hinges with necessary screws. 40 mm thick 2nd class deodar wood.

Pointing, on brick work with cement mortar 1:3 (1cement:3 Sand) with in all leads and lifts

Providing and laying brick tiles over mumty roof grouted with cement mortar 1:3 (1cement:3sand) over and 12mm layer of cement mortar 1:3(1cement:3sand) and finishing neat over RCC slab (sloped portion).

6mm thick cement plaster to ceiling in Cement Mortar 1:3 ( 1 cement:3 sand) with in all leads and lifts

15mm Thick cement plaster in single coat of rough sides of bricks/ stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) in all leads and lifts.

15 mm thick cement plaster in single coat on rough side of brick/ stone masonry for interior plastering up to floor two level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth in CM 1:3 (1cement: 3 sand) with in all leads and lifts.

20 mm thick cement plaster in single coat on rough side of brick/ stone masonry for interior plastering up to floor two level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth in CM 1:6 (1cement:6sand) with in all leads and lifts.

Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flats square or round bars with rounded headed bolts and nuts or by screws complete. (Plain grill)

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws etc.

Stone/boulder filling hand packed under floor in all leads and lifts.

Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement: 3 sand : 6 graded stone aggregate 20 mm nominal size) & curing complete with in all leads and lifts .

Providing 40X3mm flat iron hold fast 40cm long including fixing to frame with 10mm dia meters bolts and nuts and wooden plug and embeding in cement mortar block 30X10X15cm 1:3:6(1cement:3sand:6graded stone agg. 20mm nominal size) and curing complete in all leads and lifts.

Providing and fixing M.S.fan clamp type -1 of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop,all as per standard design complete with in all leads and lifts.

White washing with lime on undecorated wall surfaces (two coats) to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter in all leads and lifts.

Distempering (two coats) with oil bound distemper of approved brand and manufacture and or required shade on decorated wall surfaces to including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface clear grease, dirt loose pieces of scales and also including preparing the surface even and sand papered smooth in all leads and lifts.

Finishing wall with water proofing cement paint of approved brand and manufacture of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials with in all leads and lifts.

Providing and fixing anodized aluminium sliding door bolt anodeized colour and shade with bolts and nuts anodized colour and shade with bolts and nuts screw etc.complete.( 250x16mm.)

Providing & fixing aluminium tower bolts (barrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete in all leads and lifts 200x10mm with in all leads and lifts.

Providing and fixing aluminium handles anodised, transparent or died to required shade with necessary screws complete in all respect 100mm in all leads and lifits.

Painting two coats (excluding priming coat) on new steel and steel based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts.

Precast terrazzo tiles hydraulic compressed 20mm thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25mm average thickness of cement mortar 1:6 (1cement:6sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required including rubbing and polishing complete with tiles of grey or silver grey shades within all leads and lifts complete in all respect.

Wire crate made of G.I. wire filled with boulders with square cut faces against the wire (wire crates to be measured and paid for separately) as per the direction of Engineer- in charge with in all leads and lifts.

Wire crate made of G.I. wire filled with boulders with square cut faces against the wire (boulder filling to be measured and paid for separately) GI wire 5mm thick corresponding to SWG-6 15cm x15cm mesh as per the direction of Engineer- in charge with in all leads and lifts.

Providing 1.80 mtrs high fencing with 2.5 mtrs angle iron post 2.5 mtrs centre to center with nine horizontal line and 2 diagonals of galvanised steel barbed wire as per IS- 2778-1962 type-I weight of wire 9.38 Kg/100 mtrs ( minimum) strained and fixed to post by making holes/cuts to angle post of size 50x50x6 mm including excavation and cement concrete 1:3:6 etc.

Providing and fixing 1 No MS gate of size 1.20X1.20 mtrs by fixing MS T-iron at centre fixed with CGI sheet to MS pipe 32mm dia with MS flat 25 x 5mm size with hold fast etc. complete with locking arrangement including painting etc with in all leads and lifts.

Providing and fixing PVC pipe of ISI mark of 80mm diameter for weep holes 2.00 mtrs c/c horizontally & 1.00 mtrs c/c vertically as per direction and to the entire satisfaction of Engineer in charge.

Providing of fencing panel of size 1.20x1.20 mtrs of jalli 25 x 25mm mesh welded to MS black tube 32 mm dia of 14 gauge with MS flat cover 20x3 mm welded all around the pipe panel two on both sides and providing hold fasts 7 Nos of MS flat of 32x3mm thickness including cutting welding, painting with red oxide paint complete in all respect the Jali of 25x25 mm should be fixed in 1.20x1.20mtrs the work should be executed as per the entire satisfaction of the Engineer in charge.

Wiring for Two No Pump house Wiring for light point fan point exhaust fan point call bell with 1.5 sq.mm PVC insulated PVC sheathed copper conductor cable in casing and capping as required. Category-C

Supplying and fixing 15/16 Amp. Tumbler piano type switches. The existing switch box/cover including connection etc. as required.

Supplying and fixing 3 pin 15/16 Amp. Socket outlets on the existing switch box/cover including connection etc. as required.

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.2x2.5 sq.mm

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.2x4.0 sq.mm

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing and capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2 x 6.0 sq.mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet size 200 mm x 250 mm x 75mm deep.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus-bar, wire set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc as required single door-6 way.

Supplying and fixing 8 Amp to 63 Amp rating 240 volts (a) series miniature circuit breaker of following poles in the existing MCBDB completed with connections testing and commissioning etc. as required category-A.

Supplying and fixing 40 Amp. to 63 Amp rating volts G-series miniature circuit breaker of following pole in the existing MCB DB complete with connection testing and commissioning etc as required. 40 Amp double pole.

Earthing with GI earthing 4.5mtr long x 40mm dia including accessories and providing masonry and sure with copper plate having locking arrangement and watering pipe etc. (bat) complete as required.

Providing and fixing 6 SWG dia GI wire on surface or incess for loop earthing as required.

P/F CFL lamps 18 watt of superior quality

Providing and installed testing commissoining of celling fan of Bajaj/Crompton make complete with regulator , including wiring the down rods of standered length with 16/2.0mm twin twistwd fixing phenolic laminated sheet cover on the fan box etc. Celling fan 1400mm sweep category - A

P/F fan Regulator of ISI make

Providing and Fixing following surface mouting T5 luminaries with powder coated CRCA sheet housing mirror optics reflector electrinic ballast decorative end caps suitable for 28 watt FTL(T5) , complete with all accessories, connection testing and commissioning etc.

1X 28 watt FTL(T5) cat -A

Providing and fixing of street light luminaries of pressure die cast aluminium housing , haet resistance toughened glass IP 66 Proction of category LSTP-45-CDL of Havells/ Crompton make having 45 watt capacity in all leads and lifts and entire satisfaction of the Engineer-in-charge.

Construction of Toilet 1.00x1.00 mtr. Size of standard height and depth made of RCC planks, frame and shutter of angle iron and plain CGI sheet WC Indian type and pit including excavation of toilet foundation & soak pit in all kinds of soil and disposal of surplus excavated earth, filling with course sand, cement concrete flooring 1:2:4 ( 1 cement :2 sand:4 graded stone aggregate 20mm nominal size) for rural sanitation system in all leads and lifts as per standard design and drawing or as per the direction of the Engineer in Charge.

Anil Kumar

Piar Chand Sharma