Repairing and Renovation to Juvenile Home for Girls at Bharuch (Flooring, Colour Work & Other Misc. Civil Work etc.) Dist. Bharuch.

Name of Work : Repairing and Renovation to Juvenile Home for Girls at Bharuch (Flooring, Colour

Work & Other Misc. Civil Work etc.) Dist. Bharuch.

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. UnitRate in Total

No. Figures Amount

1 Dismentaling tiled of stone floors laid in mortar including 727.00 Sqm 46.77

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

2 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 701.15 Sqm 916.27

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light

3 Removing dry or oil bound distemper by a washing and 2569.00 Sqm 10.99

scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete.

4 Wall painting (two coats) with plastic emusion paint of 1384.00 Sqm 86.86

approved brand and manufacture on undecroated Ceilling

surfaces to give an even shade including throughly brushing

the surface free form mortar dropings and other foreign

matter and sand papered smooth.

5 Wall painting (two coats) with plastic emusion paint of 1369.00 Sqm 78.90

approved brand and manufacture on undecroated wall

surfaces to give an even shade including throughly brushing

the surface free form mortar dropings and other foreign

matter and sand papered smooth.

6 Brick work using common burnt clay building bricks having 9.00 Cum 4289.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)Extra for brick work in superstructure above plinth

level upto floor two level (B) Conventional.

7 (i) Half brick masonry in common brunt clay building bricks 67.00 Sqm 651.67

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth Extra for half brick masonry in

superstructure above plinth level upto floor two level. (B)

8 Providing 15mm thick cement plaster in single coat on 150.00 Sqm 167.03

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (ii) Cement mortar 1:4 (1-cement :4-sand).

It. Item of Work Qty. UnitRate in Total

No. Figures Amount

9 20mm thick sand faced cement plaster on walls upto height 65.00 Sqm 329.29

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

10 Applying two coats of putty & two coats of primer of 214.00 Sqm 40.59

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.

11 Providing And filling with good quality sinder(steam coal) as 5.00 Cum 594.89

directed by engineer in charge in sunks in layers of 15 cm

thick,including watering,placing ,ramming well etc as

directed, for all floor.

12 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 5.00 Cum 2640.21

coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth.

13 Providing and laying Ceramic tiles 6mm thick in flooring 136.00 Sqm 957.63

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

14 Providing and fixing polished 18mm thick green marble 50.00 Sqm 1124.13

stone with full round edge and polished of approved quality

in clading on sill and around the doors/ windows/ ventilation

with 20 mm thick cement plaster CM (1:4) and fixing with

cement slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc. complete.

15 Providing and fixing standared extruded of alluminium 4.00 Sqm 1175.56

section of size 63.50 x 38.10 x 1.95 mm(of Jindal Section

no:4605,@ Wt 1.094Kg / Rmt with colour Powder Coated

alluminium frame with 5 mm thick transparent bronze colour

tinted float glass as details etc complete for For ventilation.

16 Providing and fixing fly proof galvanised M.S. wire guage of 4.00 Sqm 669.94

I.S.I guage designation 85 G. with wire of 0.56 mm to

windows and celevating windows including 60 x 20 mm

beading of teak wood.

17 Dismantling santtary fittings like wash basin . W.C. pan 8.00 Each 394.51

Indian and European type, flushing tank etc. including

stacking the materials with all lead and lift.

18 Providing and fixing washbasin with single hole for pillar tap 10.00 Each 1382.37

with C.I. or M.S. brackets painted white including sutting

holes and making good the same but excluding fittings.(A)

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

19 Providing & Fixing CERA or iquvalent wash down water 4.00 Each 2382.59

closet (European w. c .pan) wall Hung type with integral "p"

or "s" trap and PVC fushing cistern with fittings and

including plastic sheet cover including jointing trap with soil

pipe in cm 1:1 ( 1 Cement : 1 fine sand) and connecting

cistern with closet as approved quality etc comp.

20 Providing laying and jointing in true line and level 40mm dia. 15.00 Rmt 148.12

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

make as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

21 Providing, laying and jointing in true line and level 110mm 15.00 Rmt 835.15

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

22 Providing laying and jointing in true line and level 25mm dia. 15.00 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

make as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

23 Providing and fixing Gun metal check or non-return fullway 15.00 Each 420.63

wheel valve.(E) 25mm dia.

24 Providing and fixing Gun metal check or non-return fullway 15.00 Each 663.43

wheel valve.(E) 40mm dia.

25 Providing and fixing S.W. gully trap with C.I. grating brick 15.00 Each 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight (i)

Square mouth traps (B) 150mm x 100mm size P or R type.

26 Providing and fixing pillar tap, capstan head, screw down 15.00 Each 308.73

high pressure with screws, shanks and back nuts. (i) 15mm

27 Providing and fixing screw down bib taps of following 15.00 Each 186.83

size.(A) Brass screw down bib tap polished bright. (i) 15mm

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

28 Providing and fixing chromium plated brass half trun flush 15.00 Each 615.63

cock of approved quality including fixing in pipe line etc.

complete.(ii) 25mm dia.

29 Providing and fixing Stainless steel Kitchen Sink Glossy 1.00 Sqm 2370.10

ASIS 304 grade and 1 mm thick with over all size 510 x

33 and bowl size 445x368x190 mm of Nirali brand or

equivalent with all fittings with C.I. Or M.S. brackets painted

white/ or fixing on stone.

30 Providing and fixing cast iron (Spun) Nahni trap of the 19.00 Sqm 615.63

following nominal diameter of self cleaning design with C.I.

screaed down or higned grating including cost of cutting and

making good the walls and floor 100mm inlet and 50mm

outlet.(C) 100mm dia.

31 Carrying out wall treatment for termitecontrol including 1396.00 Sqm 27.85

spraying with chemical solution in oil base (0.5 lit./

Sq.mt.)including labor material.Using Heptachloride 20 EC

as per IS 6316-part II concentration weight 0.50 percent is

recommended i.e. one litre chemical emulsion dillute with

39litre of gof IS concerntration total dillute concentration will

be 40 litre inclusive of the one litre chemical emulsion

application at the rate of 7.50 Litre chemical/ sqmt of

surface is recommended as per I.S.

32 Providing erecting fixing double coated Syntext PVC (ISI) 12000.00 Ltr. 3.95

water tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

33 Granite Slab (18 mm thick) 1 side Polished. 18.00 Sqm 1360.93

34 Providing and fixing 25 mm thick shutters for cupboards etc. 34.50 Sqm 3064.44

including anodised alluminium butt hinges with

necessaryscrews. (A) Indian teak wood. (i) Fully Panelled.

35 Providing and fixing FRP frame size 100x50 mm and 35mm 23.00 Sqm 2377.76

thick FRP shutter having extra reinforcement on sides &

edges in polish finish. The core of the shutter & frame is to

be filed up with injected polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof & resistance

to mild acid/alkali. Rates are to be inclusive of S.S hinges

with necessary screws & alluminium S.S fixtures &

fastenings & fastener sleeve.

36 Providing and fixing wooden flush door shutter with 35 mm 45.36 Sqm 4233.28

thick waterproof flush door shutter with 1 mm thk.

Laminated sheet on both side of the shutter with S.S.

mortice lock, S.S. heavy duty hinges and S.S. stopper with

necessary fixtures and fastenings including polishing work

It. Item of Work Qty. UnitRate in Total

No. Figures Amount

37 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 12.35 Sqm 3481.28

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth.

38 Repairing, Providing and fixing of Ridge flashing for roof 35.00 Sqm 858.67

panel shall be made out of 0.5 mm thick pre coated GI

sheet . The Precoated sheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall have

zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet and

polyester top coat 15-18 micron. The PPGI Sheet shall

have plastic protective guard film of minimum 25 microns

to avoid scratches during transportation. The ridge shall be

fixed to the steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c along length of

capping/flashing etc complete .

39 Steel work, welded in built up sections framed work 7.00 Qntl 9047.86

including cutting, hoisting, fixing in position and applying a

priming coat of read lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like (more than

40 Providing and fixing M.S. grills of required pattern to 308.00 Kg. 102.62

wooden frames of windows etc. with M.S. flats at required

spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws (A) Plain Grill.

41 Providing and fixing PVC plain colour false ceiling with flush 35.00 Sqm 352.56

type with alluminium frame, frame work is done with three

different sections of G.I. sheet of 24 gauge thickness

named as C, U and L. The C section is fixed with hangers

at an equal distance of 36” each and then U section is fixed

perpendicular on C section with steel screws at an equal

distance of 16” each. The complete frame work is

supported by G.I. L angle 6mm rod hangers from the roof

and L sections is fixed all around the wall as shown in the

diagram. 5mm PVC sheet strips of size 2 wide and fixed

with counter sunk steel screw on the U section. Further

3mm PVC sheet is stuck to these PVC strips with solvent

cement such that joining lines are perfectly matched. P.U.

putty is filled, ceiling for getting fine surface finish etc.

complete as per direction of Engineer in charge,

manufacturer’s specification and drawing.

i.e.Rs. Twenty lakh thirty two thousand one hundred ninety two and paise thirteen only.

I/We am/are willing to carry out the work @ ______________ % above/below percent

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

(Should be written in figures and words) of the estimated rate mentioned above. Amount of

my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in

all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified

by me and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

City (R & B) Sub Division Bharuch (R & B) Division Bharuch (R & B) Division,

Bharuch Bharuch Bharuch