Interlinking ATS

Amount

Supply and laying of 110 mm outer dia HDPE (high density polyethylene) pipe confirming to IS 4984 suitable for cable laying along with its necessary accessories like coupler, end plugs etc. below the ground (i/c road crossing, cement concrete drain area, etc) at a depth of min 1.5 m through HDD method with fusion welding of HDPE pipes as per site requirement

Constructing brick mansory chamber of size 1200 mm x 1200 mm x 1200 mm inside with 7.5 class designation bricks in cement mortar 1 :4 (1 cement :4 coarse sand) with 3 inch thick RCC top slab in four parts with 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 20 mm nominal size) including necessary excavation, foundation concrete 1:5:10 mix (1 cement:5 fine sand :10 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement complete as per standard design.

Supply of 24 core single mode armoured fibre optic cable .

Supply of 48 core single mode armoured fibre optic cable .

Supply of 100 pair RC cable non-armoured cable.

Laying of 24 core single mode armoured fibre optic cable in the existing HDPE pipe suitably through pulling and blowing with DIT as required.

Laying of 48 core single mode armoured fibre optic cable in the existing HDPE pipe suitably through pulling and blowing with DIT as required.

Laying of 100 pair RC non armoured cable in the existing HDPE pipe suitably through pulling and blowing with DIT as required.

Scanning the Ground Penetrating Radar following the OFC route and submit report before starting of HDD.

TNS Networking Solutions Pvt Ltd