Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAccepted-Finance | ₹1.4 L | L1 | Accepted-Finance L1 |
| 2 | L2₹1.8 L+₹42,810.41 (31.5%)Rejected-Finance | ₹1.8 L+₹42,810.41 (31.5%) | L2 | Rejected-Finance L2 |
Tender Value
₹1.9 L
EMD Value
₹4,000
Closing Date
3 Aug 2026, 10:00 amClosed
HPPWD Division Nahan
Executive Engineer HPPWD Division Nahan
Repair of plaster, distempering, UV fiberglass plastic sheet Demolishing brick Armoury block
2026_PWD_139985_4
NHN 3962-82
Open Tender
Civil Works
Percentage
60 days
Nahan
As Per Bidding Document
10 documents required · 10 mandatory
₹350
₹4,000
4 Aug 2026
27 Jul 2026
3 Aug 2026
27 Jul 2026
3 Aug 2026
27 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all including carriage of materials with in all leads, lifts and other incidentals charges complete as per entire satisfaction of the Engineer-in-charge. | 34.5 | Per sqm | 264.65 | ₹9,130.43 |
| 2 | Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. Upto Floor all level including carriage of materials with in all leads, lifts and other incidentals charges complete as per entire satisfaction of the Engineer-in-charge. | 34.5 | Per sqm | 130.98 | ₹4,518.81 |
| 3 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2 mm thick corrugated as specified including carriage of materials with in all leads, lifts and other incidentals charges complete as per entire satisfaction of the Engineer-in-charge. | 166.4 | Per sqm | 1,031.85 | ₹1,71,699.84 |
| 4 | Demolishing dry brick pitching in floors, drains etc. including stacking of serviceablematerial anddisposal of unserviceable material within 50 metres lead : including carriage of materials with in all leads, lifts and other incidentals charges complete as per entire satisfaction of the Engineer-in-charge. | 1.44 | Per cum | 543.85 | ₹783.14 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.95 MB
SBD_Armoury_IRBN.pdf
Tender Documents • 3.87 MB
BOQ_207490.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .