S. R. to Electrical work in S.P. Office at Athwalines, Surat City, Surat. (S. R. Priority - 2025-26) (First Attempt)

No. In Figure In Words

1A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 355.00 Point 468.00 Rupees Four Hundred Sixty Eight

sq. mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper Only

PVC insulated FRLSH wire for earth continuity in FIA approved ISI mark

medium class white colour 20/25 mm dia. embossed rigid PVC pipe/

CASSING CAPPING with PVC fitting fixed with adhesive solution

erected on Brick Wall along th continuous G.I. fish wire to draw wires

and finishing the surface to match the wall / ceiling complete with

approved make 5/6 Amp. ISI make modular type switch and

accessories mounted in 20 G. G.I. company fabricated metallic box

covered with appropriate front plate modules erected flushed with wall /

ceiling with necessary modular lamp holder / modular ceiling rose / HD

Connector (Vihan/Great White/Panama make) as directed for Flushed

wiring Light point. Cat.-III..Length of point wiring must not increase

than 10 mtr. For that necessary switch boards and their locations must

be finalised before execution by agency otherwise payment will not be

done for extra long point. (For future extention, if required, agency has

to erect one higher size metal box and modular plate as per instruction

of EIC. Cost of blank plate shall be paid as per tender item) [Wire must

be having box packing in existing pipe erected flushed on wall/ceiling

complete cat.III

1B For Secondary Light Point Cat-III( If Required ) 15.00 Point 106.00 Rupees One Hundred Six Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

1C For Bell Point (Cat-III) 5.00 Point 468.00 Rupees Four Hundred Sixty Eight

1D For Fan Point.(with 6A Modular type switch and Two Module hum free 130.00 Point 651.00 Rupees Six Hundred Fifty One Only

5/6 step EME step type Electronic fan regulator both having ISI Make )

1E For separate Point (with 6 Amp. Switch & 5 pin socket both having ISI 35.00 Point 485.00 Rupees Four Hundred Eighty Five

Make) Cat-III ( If Required ) Only

1F For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket) (Cat- 150.00 Point 321.00 Rupees Three Hundred Twenty One

III) Only

2 Providing & Erecting Plug Point wiring with 1.1 KV grade ISI marked 50.00 Point 662.00 Rupees Six Hundred Sixty Two Only

approved make 2 x 2.5 sq.mm copper PVC insulated FRLSH wire with

1.5 sq.mm (green) copper PVC insulated FRLSH wire for earth

continuity in FIA approved ISI mark (a) with medium class Rigid PVC

pipe and accessories erected flushed on wall/ceiling complete with

white colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution erected flushed on wall/ceiling complete

the surface to match the wall / ceiling complete with approved make 5/6

Amp. ISI make modular type switch and accessories mounted in 20 G.

G.I. company fabricated metallic box covered with appropriate front

plate modules erected flushed with wall / ceiling with necessary modular

lamp holder / modular ceiling rose / HD Connector as directed for Open

wiring.. (a) 16 Amp switch & 1 No. 6/16 A universal socket white colour

suitable for 3 pin top duly both having ISI mark. (Necessary Sheet Must

Be Erected On All Box To Prevent Mortor Going In To The Box) Cat.-III.

(Conductor resistance should be as per IS:8130/1984 Class-II as per

attached Annexture-CR) ( If Required )

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

3 Providing & Erecting Plug Point wiring with 1.1 KV grade ISI marked 15.00 Point 833.00 Rupees Eight Hundred Thirty Three

approved make 2 x 4.0 sq.mm copper PVC insulated FRLSH wire with Only

2.5 sq.mm (green) copper PVC insulated FRLSH wire for earth

continuity in FIA approved ISI mark (a) with medium class Rigid PVC

pipe and accessories erected flushed on wall/ceiling complete with

white colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution erected flushed on wall/ceiling complete

the surface to match the wall / ceiling complete with approved make 5/6

Amp. ISI make modular type switch and accessories mounted in 20 G.

G.I. company fabricated metallic box covered with appropriate front

plate modules erected flushed with wall / ceiling with necessary modular

lamp holder / modular ceiling rose / HD Connector as directed for Open

wiring.. (a) 16 Amp switch & 1 No. 6/16 A universal socket white colour

suitable for 3 pin top duly both having ISI mark. (Necessary Sheet Must

Be Erected On All Box To Prevent Mortor Going In To The Box) Cat.-III.

(Conductor resistance should be as per IS:8130/1984 Class-II as per

attached Annexture-CR) ( If Required )

4A Providing & erecting Modular type accessories mounted on 20G. 95.00 Each 159.00 Rupees One Hundred Fifty Nine Only

company Fabricated Galvanised Metal box covered with appropriate

front plate modules erected flushed with wall / ceiling with : Cat-III (a)

RJ-11 Telephone Socket [A] For One Gang CAT-III

4B Modem Jack for Computer Open RJ-45 CAT-III 160.00 Each 159.00 Rupees One Hundred Fifty Nine Only

4C Blank Plate Single cat III 150.00 Each 25.00 Rupees Twenty Five Only

5A Providing and erecting Medium Class FIA approved and ISI mark white 100.00 Mtr. 24.00 Rupees Twenty Four Only

colour (embossed) RIGID PVC PIPES of following size complete

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & clamps on / in wall / ceiling along with continuous

fish wire to draw mains with necessary fittings and junction boxes for

following dia. 20 mm. dia.

5B For 25mm dia. 150.00 Mtr. 33.00 Rupees Thirty Three Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

6A Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) 200.00 Mtr. 22.00 Rupees Twenty Two Only

having double-locking arrangement with grooves, trunking of size not

below 12.5 mm in height as per IS with accessories of PVC/Resin

polypropylene not below 1.8 mm thick duly sealed in joint & erected on

wall / ceiling of following size .(1) 20 mm

6B (2) 25 mm 200.00 Mtr. 31.00 Rupees Thirty One Only

7A (A) Supplying and laying UPVC cable trunking system comprising 400.00 Mtr. 187.00 Rupees One Hundred Eighty Seven

unplasticised polyvinyl, chloride rigid material with ignition free & flame Only

proof confirming BS .All necessary accessories and measuring of

following sizes.(3) 50 mm x 50 mm trunking

7B (1) 75 mm x 50 mm trunking 400.00 Mtr. 275.00 Rupees Two Hundred Seventy Five

8 Providing & erecting PVC Corrugated Flexible Conduit with required 50.00 Mtr. 21.00 Rupees Twenty One Only

nos. of coupling, PVC bushes, Check-nuts etc. complete of following

sizes. 25mm

9A Providing & Erecting Mains with FRLSH PVC Insulated wire ISI 2500.00 Mtr. 61.00 Rupees Sixty One Only

marked 1.1 KV grade with FIA approved ISI mark medium class

20/25/32 mm dia. embossed rigid PVC pipe with PVC fitting fixed with

adhesive solution to be erected on/in brick wall / slab along with

continuous G. I. fish wire to draw mains laid in approved manner with

plastering by cement mortar & finishing the surface to match the wall /

ceiling complete with FRLSH PVC insulated wire for earth continuity.

(Approved ISI make only) (Conductor resistance should be as per

IS:8130/1984 (E) Exiting Pipe [a] 2 x 1.5 sq.mm. FRLSH copper multi

stranded conductor mains with 1.5 sq.mm. FRLSH copper multi

stranded conductor for earthing as per standard colour code. (with

mm dia. PVC pipe) (for point wiring and Lighting SB mains) [Wire must

be having box packing.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

9B For 2 x 2.5 sq.mm. FRLSH copper multi stranded conductor mains with 3000.00 Mtr. 82.00 Rupees Eighty Two Only

1.5 sq.mm. FRLSH copper multi stranded conductor for earthing as per

standard colour code. (with 25 mm dia. PVC pipe) (for MCBDB mains)

[Wire must be having box packing] (Conductor resistance should be as

per IS:8130/1984

9C For 2 x 4.0 sq.mm. FRLSH copper multi stranded conductor mains with 850.00 Mtr. 113.00 Rupees One Hundred Thirteen Only

2.5 sq.mm. FRLSH copper multi stranded conductor for earthing as per

standard colour code. (with 25 mm dia. PVC pipe) (for MCBDB mains)

[Wire must be having box packing] (Conductor resistance should be as

per IS:8130/1984

9D For 2 x 6.0 sq.mm. FRLSH copper multi stranded conductor mains with 1000.00 Mtr. 157.00 Rupees One Hundred Fifty Seven

2.5 sq.mm. FRLSH copper multi stranded conductor for earthing as per Only

standard colour code. (with 25 mm dia. PVC pipe) (for MCBDB mains)

[Wire must be having box packing] (Conductor resistance should be as

per IS:8130/1984

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

10A Providing & Erecting 2.0 mtr long Earthing system by making minimum 4.00 Each 6000.00 Rupees Six Thousand Only

bore of 225 mm dia in soft soil. Suitable for doing pipe-in-pipe

technology earthing.Earthing electric rod must be made from Corrosion

free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class

ISI mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B

Class ISI mark reputed Brand Terminal Size: 70mm X 100mm length,

Terminal Should be made from inner pipe for that pipe must be pressed

and give rectangular shape so its work as a terminal.The hot deep

galvanising must be done after above process.Galvanised thickness

must be minimum 75 micron any where. SS Nut bolt:- 2 no.with washer

suitable for 14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive material

minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to

retain moisture for long time Back Filling Compound weight is 25 Kg.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification

only] [OEM has to submit all detail & sample for approved before

supplying]

[Water must be poured in bore before starting earthing. Earthing value

must be measured with earth tester. Agency has to bring the earth

resistance to at least 02 ohms & voltage between neutral & Earthing

upto 02 volt. Agency has to maintain earthing & its value for one year.

Earthing must be done in the presence of A.E. (GSPHCL)]

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

10B Providing & Erecting Earthing & Chamber Cover for above earthing of 4.00 Each 1025.00 Rupees One Thousand Twenty Five

following size: Earthing chamber should be size of 400 mm X 400 mm Only

X 400 mm depth (Round /Square) and Cover should be heavy duty cast

iron/RCC/PVC with required size of 300 mm X 300 mm X 4 mm thick

and The chamber cover/paver block shall be painted green colour and

the earthing number shall be marked in yellow colour

11A Providing & Erecting Mains with ISI marked, 1.5KV grade electrolyte 80.00 Mtr. 176.00 Rupees One Hundred Seventy Six

multi stranded, annealed copper conductor with heat resistant PVC Only

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required.(g) One Wire 16.00 mm2 (For Earthing)

11B One Wire 10.00 mm2 80.00 Mtr. 114.00 Rupees One Hundred Fourteen Only

11C One Wire 25.00 mm2 60.00 Mtr. 293.00 Rupees Two Hundred Ninety Three

11D One Wire 35.00 mm2 60.00 Mtr. 373.00 Rupees Three Hundred Seventy

Three Only

11E One wire 70.00 sq. mm. 50.00 Mtr. 829.00 Rupees Eight Hundred Twenty Nine

12 Supplying and erecting 8 W LED lamps with following wattage capacity 30.00 Each 111.00 Rupees One Hundred Eleven Only

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-

surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27

/ B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable LAMP holder

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

13 Supplying and Erecting LED indoor fitting having 1100mm long with 60.00 Each 370.00 Rupees Three Hundred Seventy Only

LED of wattage Mashroom shape 0.2W to 0.5W assemble on single

MCPCB with housing use as a heat sink shall be made from white

powder coating Aluminum extrusion having enough strength (sample

must be approved by EIC)with polycarbonate diffuser with following

specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD :Max. 15Pct.

(G) Rated Luminous flux: Min. 2420 lm

(H) CCT: 6500K

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80Pct.

(K) LED life span: Min. 50000 Hrs @ L70 (Certificate shall be attached)

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV

(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be

(Q) Fixing Clamp min.12mm wide heavy duty design & strength should

be sufficient to hold the fitting erected on wall or ceiling

(R) 3 core x 1.0 Sqmm copper wire with min. 1ft (300mm) earthing

connector.

(Note:-The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

14 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W 230.00 Each 1159.00 Rupees One Thousand One Hundred

Cool/Natural white/Warm (6K/4K) white Color back lit LED Down lighter Fifty Nine Only

with BIS approved separate potted driver with single piece pressure die

cast aluminium alloy housing (no plastic part allowed) with corrosion

resistant powder coated finish with PMMA/PS/Injection moulded

Polycarbonate diffuser with high brightness LED complete (LED from

Philips Lumileds, CREE, Nichia, Bridgelux, Seoul & Osram) CRI greater

than 80, CCT 6K/4K. The LED's should be mounted on back lit metal

core PCB for better heat conduction and long life of LED. Test report of

shall be submitted (LM 79 for complete fixture, for individual LED). The

Fixture have protection like miswiring, over voltage, over load , IP20

wrong wiring, THD less than15Pct.,, P.F greater than 0.95, efficiency

greater than equal to100 lm/w & driver efficiency greater than 85Pct..

For 24 W fixture wide voltage range from 180 V to 270 V, 50/60 HZ @

240V, 4 KV surge protection. The fixure must have min. 2400 lumen

light output. The fixture should be provided with external separate

Potted driver, latest Valid BIS approved Luminaire and driver. The

Fixture efficiency greater than equal to90 lumens/watt only for safety

and performance. (L70 @ 50,000 Hrs.) The fixture should be able to

easily mount on POP / Grid false ceiling. The Luminiare should be

tested as per IP 20 and following test reports should be submitted at the

time of approval: heat resistant test, thermal test, Ingress protection

test, IK test, Photobiological report with 3 core X 1.0 Sq.mm. flexible

wire as per site requirement [Note:-The manufacturer / authorized

Channel partner of the manufacturer has to submit 5 yrs. free

replacement Guarantee for complete Fixture

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

15 Providing and erecting max. 10 watt LED battern having main housing 10.00 Each 309.00 Rupees Three Hundred Nine Only

aluminium extruded & front cover of polycarbonate. Electrically &

photomatry parameters are as undr: 240 V, 50 Hz, System wattage

w ± 10 %, PF ≥ 0.95, system luments min. 1000, CCT- 3000K to 6500K,

CRI ≥ 80, THD ≤ 15%, delivery efficiency ≥ 85%, L80 Certified LED,

30000 hrs. @ L70, Electronic CC driver, insulated copper wire for

internal wiring, IP20, operating voltage: 160 to 270 V, Surge -

KV,Fixing clamp min. 12mm wide heavy duty design & strength should

be sufficient to hold the fitting erected on wall or ceiling,Length of fitting

should be min. 600mm, 3 core x 1.0 sqmm copper wire with min 1 ft

(300mm) earthing connector,Diffuser shap must be OMEGA/Mashroom

& AI. base must be powder coating.

16 Providing and erecting Polycarbonate body surface mounting LED Bulk 3.00 Each 780.00 Rupees Seven Hundred Eighty Only

head type 9 watt Lighting Fitting with electronic driver having THD <

15%, CRI>80, P.F.0.95 And lumen output from luminaire 720 lm, input

voltage range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt

driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working

temperature, AL frame with Beam Angle 120 deg.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

17 SITC of Indoor Commercial Recess/Surface mounted (IP20) Max. 45 to 35.00 Each 2071.00 Rupees Two Thousand Seventy One

48 w Cool White Color LED office Lighting Luminaire having size Only

(2'X2')/(4'X1') with suitable seperate metal frame with white powder

coating for installing fitting in gypsum false ceiling with extrernal

separate driver having BIS certification for installation in Gypsum ceiling

with single piece pressure die cast aluminium alloy housing/CRCA

sheet of 0.6 mm thickness with corrosion resistant powder coated finish

Polycarbonate diffuser with high brightness LED complete (only from

Philips Lumileds, CREE, Nichia, Buildglux, seoul & Osram CRI >

CCT 5600K (Bin 5600-600k). The led's should be mounted on Metal

core based PCB for better heat conduction and long life of LED. (LM

for complete fixture, LM80 for individual LED, report must be submitted)

The Fixture should have protection of driver like over/under voltage,

THD<10%,Fixure must have Min 3800 Lumen light output. Fixture

Efficacy should be>=110 Lumens/watt. The fixture should be provided

with external separate driver BIS approved only for safety and

performance. (L70 @ 30,000 Hrs.) The Luminiare should be tested as

per IP 20 and necessary test reports should be submitted at the time of

approval. (Lighting Technologies make, Phillips, Wipro, GRE, Pyrotech,

Orient, Havells make & model approved by EIC subject to above

specification only) [Note:- The manufacturer/authorized Channel

partner/dealer of the manufacturer has to submit 4 yrs. free replcement

Guarantee for complete Fixture]

18 providing & Erecting LED Bollard fittings of minimum height 600 mm & 30.00 Each 2661.00 Rupees Two Thousand Six Hundred

dia.100mm having polycarbonate clear/milky diffuser mounted on 3mm Sixty One Only

thick aluminium finished powder coated pipe with base plate

160x160mm with erection by M8x75mm fastner with required RCC

foundation.IP65 for 15watt ,surge-4kv- cat-III

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

19 Supplying, Installing, Testing & Commissioning of 30 W LED Outdoor 4.00 Each 3644.00 Rupees Three Thousand Six Hundred

type Post top Lantern light with IP65 protection with housing made of Forty Four Only

sturdy aluminium die cast housing with radiating cool surface and milky

white high quality PMMA round cover with corrosion resistant Grey

colour powder coating with high efficiency potted driver with necessary

safety precautions, 10 kv surge protection device with high min.

lumens LED with long life of 30K @ L70 (L70@30000 hrs.), Installation

bracket as per site requirement, accessories 3C X 1.5 Sq.mm copper

flexible wire upto terminal box etc. (Note:-The manufacturer / authorised

Channel partner of the manufacturer has to submit 4 years free

replcement Guarantee for complete Fixture)

20 Supplying & erecting Electronic Type Cordless Call Bell erected on 5.00 Each 248.00 Rupees Two Hundred Forty Eight

PVC/Metal board having portable bell push working on D.C. & bell on Only

230V A.C. supply with cells / battery

21 Supply, Installation, Testing and Commissioning of 1200mm sweep, 130.00 Each 2603.00 Rupees Two Thousand Six Hundred

BEE 5 Star rated, Max. 30Watt Ceiling fan with Brush Less Direct Three Only

Current (BLDC) permanent ferrite magnet Motor, class of insulation:

B/E, Double ball bearings, Rust free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper winding, Power

factor not less than 0.9, Service Value (CMM/W) minimum 7.5, Air

delivery minimum 220 CMM, Minimum 345 RPM,230v (tolerance as per

IS : 374 2019), THD less than 10%, compitible with electronic regulator

unit for Five Speed Control and all remaining accessories including

safety pin, nut bolts, washers, temperature rise equal to 75 degree C

(Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge,

over current and overload protection , 50 Hz, Single phase AC Supply,

earthing etc. Complete as required.Down road: up to 1.0 mtr as per site

requirment.

(A) 1200 mm Sweep (48") ( Make Havells Efficiencia Dx , Bajaj

Energos 28 & Crompton make & model approved by EIC suject to

above specification )

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

22 Supplying and erecting approved make oscillating type bracket fan A.C. 8.00 Each 2509.00 Rupees Two Thousand Five Hundred

230 V. 50 cy/s 400/450 mm sweep wall mounted with height adjustment Nine Only

and rotary tilting device complete with guard, flexible Core plug top

complete erected with lead wires as directed.

23 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. 130.00 Each 98.00 Rupees Ninety Eight Only

Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar.

24 Supplying & erecting approved make low noise Decorative exhaust fan 20.00 Each 1687.00 Rupees One Thousand Six Hundred

having size 200 mm with 1350 RPM with round / square frame Eighty Seven Only

ABS/metalic body with Grill / inbuilt lowers.

25 Providing & erecting Switch board for Computer or electric apparatus 160.00 Each 1122.00 Rupees One Thousand One Hundred

consisting of following items in single board erected on 20 G. G.I. Twenty Two Only

company fabricated metallic box erected with appropriate front plate

modules erected flushed with wall as directed. 1 no. 6/16 Amp.

universal Socket, 1, 1 nos. 16 Amp. switch, 3 nos. 6 Amp. Switch &

nos. 6 Amp. 5 pin Plug. For Computer power Supply board. Cat.-III

26 SITC of specified make X color for Cat.-6 Data and Y color for Cat.-6 6000.00 Mtr 47.00 Rupees Forty Seven Only

voice cable to be done in prelaid PVC pipe / raceway, but without the

cost of raceway or pipe (the wire is to be drawn from MFD/ JB to outlet

point) (a) CAT - 6 (For Computer Cabling and For Voice Cabeling)

(Molex, Avaya, D-Link, Legrand make Only)

27 SITC of company fabricated Patch cords shall conform to Cat- 6 & 160.00 Each 155.00 Rupees One Hundred Fifty Five Only

conductor shall be stranded for better flexibility Shall support network

line speeds up to 1 Gbps Shall have RJ-45 jacks. For 1 Mtr.[Make and

model approved by EIC as per specification]

28 SITC of company fabricated Patch cords shall conform to Cat- 6 & 160.00 Each 199.00 Rupees One Hundred Ninety Nine

conductor shall be stranded for better flexibility Shall support network Only

line speeds up to 1 Gbps Shall have RJ-45 jacks. For 2 Mtr. [Make and

model approved by EIC as per specification]

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

29 SITC of Layer 2 Switch, Shall have 24-port 1000 BASE-T (RJ45) PoE+ 6.00 Each 31680.00 Rupees Thirty One Thousand Six

with additional 2-port 1GBASE-X (SFP+), 190W PoE Budget with single Hundred Eighty Only

power supply unit, shall have minimum 52Gbps non-blocking fabric

across 28 ports, Switch must have advance feature like VLAN Tagging,

Voice VLAN, LAGs, LACP, IGMP Snooping, Multicast VLAN

Registration, ACLs, LLDP, SNMP, QOS. Switch’s Operating System

should be tested under Common Safety Criteria Certification & as per

attached details specification. (Make:- Netgear/Cisco Enterprise/HP

Enterprise )

30 Supply, Installation, testing and commissioning of 24 port Cat 6 19" 6.00 Each 4357.00 Rupees Four Thousand Three

Toolless Patch Panel ( fully loaded) enable all possible combinations of Hundred Fifty Seven Only

the various types of cable mounted on the same panel by using various

toolless connector blocks/modules. Have a metal structure enabling

them to be durably fixed to the uprights of the 19” chassis and assuring

automatic grounding between toolless RJ-45 connectors, the panel, and

the 19” uprights of the enclosure. Include rear cable support with plastic

cable guides to hold cable without need for cable ties. Include quick

mounting system to mount the panel into the 19” rails without use of

cage-nuts. These may be used to secure the connections of wifi

access points, IP cameras, servers, or other critical devices. Front

Removal IO's option for maintenance and trouble shooting with

Different Colours Labels for Labelling & Identification of Individual Ports.

& as per attached details specification.

(CAT 6 ) ( Make:- Molex,Commscope Systemax/ Legrand/Panduit)

31 Supply and installation of 9U steel rack for installing 4 nos. Ethernate 3.00 Each 11441.00 Rupees Eleven Thousand Four

switches/Hubs. The Rack should be fully enclosed steel housing Hundred Forty One Only

fabricated with 14 SWG sheet and powder coated with glass doors and

having wire management systems. The rate includes the Exhaust Fan,

2 nos. 4 socket and 1 switch power strip and all the wiring in the rack.

(Rittal, Valrack, APC, Legrand Make and model approved by EIC as per

specification)

32 Providing & erecting Tag Box for Telephone Lines suitable for 20 Pairs 3.00 Each 1355.00 Rupees One Thousand Three

Krone type complete with Krone & locking arrangements. Hundred Fifty Five Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

33 Providing & erecting Tag Box for Telephone Lines suitable for 50 Pairs 3.00 Each 1730.00 Rupees One Thousand Seven

Krone type complete with Krone & locking arrangements. Hundred Thirty Only

34 Supplying & erecting approved make Telephone Cable electrolytic 150.00 MTR 65.00 Rupees Sixty Five Only

copper conductor PE insulation twisted in two pairs, & wrapped with

FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket

suitable for telephone wiring & confirming to C-DOT erected in existing

pipe. of following size of conductors & nos.of pairs. With necessary

connections.(a) Unarmoured [A] Conductor Size 0.5 mm (5) Ten Pair

35 Supplying & erecting approved make Telephone Cable electrolytic 150.00 MTR 126.00 Rupees One Hundred Twenty Six

copper conductor PE insulation twisted in two pairs, & wrapped with Only

FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket

suitable for telephone wiring & confirming to C-DOT erected in existing

pipe. of following size of conductors & nos.of pairs. With necessary

connections.(a) Unarmoured [A] Conductor Size 0.5 mm (6) Twenty

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

36 Providing ad erecting approved make single phase Double Door metal 22.00 Each 6254.00 Rupees Six Thousand Two Hundred

clad D.B. as per relevant indian standards ammended upto date. Fifty Four Only

Supplying and fixing following way single phase MCB distrubution board

of company fabricated with sheet box with powder coated inside and

outside after apply seven tank chemical process of 1.2mm thick CRCA

sheet cover (Door, Back side & body of MCBDB) complete with

suitable integral single piece construction tinned copper busbar and link

with all necessary interconnection and with necessary size MS frame for

mounting MCBDB.Manufacturer must be provided (1) IP 43 and as per

IS:8623 1 & 3, IEC 61439 1 & 3 having D type PU gasket. (2) Seven

tank Powder coating Certificate (3) Tinned Copper/Brass make neutral

& Earthing link with isolation & Protecting Cover for 240 Volts on

surface / recess complete with loose wire box, terminal connectors for

all incoming and outgoing circuits, with suitable size FRLS PVC

insulated copper conductor up to terminal blocks and internal

connection, tinned coppper bus bar, 1 no. tinned copper neutral link,

tinned copper earth bar, din bar, detachable gland plate,

interconnections, powder painted including earthing etc. Single phase

incoming and horizontal single phase outgoing. For 16 Way MCBDB:

Including 40 Amp. 30 mA double pole ELCB (ELCB confirming to

IS:12640/1988 having sensitivity of 30 mA and breaking capacity of

KA), MCB 40 Amp. double pole switch (C curve confirms to IS:8828

having breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp.

with NL suitable to operate on 240 Volt A.C. power. (6 to 25 Amp

(The DBs should be used of same company of MCB / ELCB to be

used) (MCBDB must be erected in line & level with spirit level and finish

the external edge with box cutting plaster) (Same colour MCB(SP/DP)

should be used as same as MCBDB) [Including Necessary numbering /

marking on box done with red colour radium sticker as per site

requirement and instructions given by EIC on site. Font / number size

given by EIC on site as per requirement] Single phase incoming and

horizontal single phase outgoing.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

37 Desiging,fabricating,testing electrical panel (switch board) at 3.00 Sq.Mtr 21500.00 Rupees Twenty One Thousand Five

manufacuturer's workshop and Providing & erecting at site. Panel Hundred Only

should be weather proof, dust & vermin proof, floor mounted front

operated cubical panel board having IP-54 made from 2 mm. thick

CRCA M.S. sheet for outer body,gland plate & doors, 1.6 mm. thick

CRCA M.S. sheet for internal partitions with necessary supporting

angles, flats including skirting, bending, drilling, welding, riveting with

internal partitions & cable alley,rubber gromets, rib, control wires,

backelite control fuses as per requirements,sufficient nos. of hinges for

doors, door locking arrangement, rubber gasket complete with Required

Nos. heavy Duty Connector with Cadmium plated nut and bolt for Anti

rusting and Al.busbar for earth, nuts/bolts,washer etc as per instruction

of engineer-In-Charge. Cost of supplied item like switchgears, LED

indicator ,CTs , busbars and PVC FRLS copper wire with suitable size

for power interconnection,measuring instruments, foundation flange-

bolts-base plates, cost of C channel/angle iron stand (1ft to 2ft height as

per cable size)shall be excluded of panel fabrication.Specification of

suppiled items is attached seperatly.The panel shall be supplied with

Nine Tank chemical process. which shall be carried out before applying

painting, painted with powder coating. (The rates excludes the cost of

switchgears, busbars, interconnecting mains & Copper / Aluminium

strip, fuse, meters etc. The dimension shall be measured excluding

base beams.switchgear of approved brand and specification shall be

used and erected at CPRI approved panel manufacturers only. Busbar

compartment must be separate for easy termination of tails/cables and

to avoid least distance of punching holes in busbar.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Panel manufacturer have to give 4 years service support if in case of

breakdown or fault. Panel manufacturer have to submit electrical meter

calibration report. Agency should design the panel in such a way that

there should not be any excess in panel area (sq.mtr) & length of bus-

bar (mtr), if any excess is need to be done agnecy has to draw attention

to GSPHCL at the time of approval of G.A. drawing. Loading and

unloading of above item shall be done by hydra and skill work force

under supervision of electrical engineer and guidelines given by

manufacturer to avoid damage to the item. Size of door and Ele. room /

Pump room shall be measure and provide to panel manufacturer to

prepare GA drawing considering the size of electrical room/pump room

door and also inside size of it. Agnecy has to co-ordinate with civil

agency for giving proper dimenssion of electrical room/pump room to

accomodeted panel easily.[Including Necessary numbering / marking on

PANEL done with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC on

site as per requirement] (See attached details specification of panel &

manufacture also while quoting rate. [Manufacturer must be of Gujarat

state so three stage inspection can be done if required and service

support] Panel depth shall be 350 mm. as Per IEC 61439. Panel

Manufacturer has to prepare panel as per Strictly IS 61439 ( Partly

Compatment) and give the Certificate of the Same.

38A Supplying and erecting tripple pole & neutral 440V / 500 V Panel mounting 2.00 Rn. mtr. 1942.00 Rupees One Thousand Nine Hundred

Copper Busbars with four equal Nos. of electrolyte bus having current density Forty Two Only

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wraped with colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports / insulators, main

cable socket to each bar, erected in existing cubical panel with necessary

connections.For electrolyte copper busbars Suitable for 100 Amp. capacity.

38B Suitable for 300 Amp. capacity 2.00 Rn. mtr. 4861.00 Rupees Four Thousand Eight

Hundred Sixty One Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

39 Supplying & erecting approved make Four Pole 415 V change over 1.00 Each 12120.00 Rupees Twelve Thousand One

switch interior for panel mounting with operating mechanism A.C.23 Hundred Twenty Only

duty confirming to I.S.S. for 200 Amp.. ( In Main Panel )

40 Supplying and Erecting Approved make Four pole moulded case circuit 1.00 Each 17667.00 Rupees Seventeen Thousand Six

breaker having breaking capacity ICU of 35 K.A. at 415 V. having Hundred Sixty Seven Only

normal current rating 200 A. with Variable thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal connections

spreader tinned copper & complete erected in existing 16 G.M.S.

housing. housing. ICS=100% of ICU only. Cat.-III

41 Supplying and Erecting Approved make Four pole moulded case circuit 4.00 Each 6723.00 Rupees Six Thousand Seven

breaker having breaking capacity ICU of 25 K.A. at 415 V, having Hundred Twenty Three Only

normal current rating 25 A to 100 A. with Fixed thermal & magnetic

release suitable to work on A.C. supply 50 c/s. with all internal

connections spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only. Cat.-III

42 Providing & Erecting (A) Extended operating rotary handle with pad lock 2.00 Each 952.00 Rupees Nine Hundred Fifty Two Only

with three position trip,off,on suitable for 25A to 250 A panel mounting (

company must be same as switchgher company). Cat.-III

43 Supplying and erecting Approved make Earth fault Relay suitable to 1.00 Each 5427.00 Rupees Five Thousand Four Hundred

mount with inter connection to moulded case circuit breaker having CT Twenty Seven Only

ratio & MCCB rating as following along with shunt trip 220 V AC with all

internal connections & complete erected in existing M.S.housing (2)

125 - 200 Amp., CT Ratio 1/200 [make and model approved by EIC

strictly as per tender specification]

44 Supplying and erecting approved make panel mounting type Digital 1.00 Each 1263.00 Rupees One Thousand Two Hundred

Voltmeter having 3 x 1/2 digits LED display, 0 to 750 AC Volts range Sixty Three Only

erected on existing panel board with all connection, wiring etc. with

manufacturers calibration certificate.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

45 Supplying and erecting approved make panel mounting type Digital 1.00 Each 1543.00 Rupees One Thousand Five Hundred

Ammeter having 3 digits LED display, external CT operated, calibrated Forty Three Only

for 0 to 1000 Amps. suitable to operate on 500 Volt AC, erected on

existing panel board with all connection, wiring etc. with manufacturers

calibration certificate.

AC Supply 500 V on existing panel board with necessary connections. Only

47 Supplying and erecting approved make set of indicator lamps of LED 3.00 Each 43.00 Rupees Forty Three Only

type lamp, lense cover, Bakelite holder complete erected with

necessary connections.

48 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 3.00 Each 272.00 Rupees Two Hundred Seventy Two

1000/5 ratio 15 VA burden erected in existing CRCA box duly secured Only

with insulating materials connected to the meter

49 Providing & erecting 240 V MCB Double pole switch for Motor & 24.00 Each 360.00 Rupees Three Hundred Sixty Only

Inductive Load (c curve) having 10 KA breaking capacity & confirms to

IS:8828 in Existing M.S. box having following capacity. For 40 Amp.

50A Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load 2.00 Each 803.00 Rupees Eight Hundred Three Only

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity [c] 63 Amp. Cat.-III ( as per site

requirement )

50B 40 Amp. Cat.-III 2.00 Each 728.00 Rupees Seven Hundred Twenty Eight

51 Providing & erecting FRLS-XLPE (IS : 7098) (I)-88 ISI marked 500.00 Mtr 451.00 Rupees Four Hundred Fifty One Only

armoured Copper cable for 1100 volt to be laid 90 cms. Under ground

or to be laid on wall with suitable G.I. heavy guage 1.0 mm thick cable

clamp or in existing DWC pipe underground or road crossing or floor of

following size of cables. [a-1] For 4 core x 4 sq.mm.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

52 Providing & fixing Double compressed heavy duty flange type brass 20.00 Each 43.00 Rupees Forty Three Only

cable gland with rubber ring for P V C insulated armoured cable

complete with outgoing tails, insulating tape etc. For following size

cables. For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI, Comet, HMI Make

53 Providing & fixing Solderless crimping type Copper lugs conforming to 80.00 Each 8.00 Rupees Eight Only

IS suitable for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. [a] 1.5/2.5 to 6 Sq.mm

54 Providing & laying HDPE Double walled corrugated pipes (DWC) 400.00 Mtr. 117.00 Rupees One Hundred Seventeen

(conforming to IS: 16205 (part 24) 2018)) with minimum load required of Only

450N capacity with anti rodent and ultra violet material properties with

necessary connecting accessories of same material at required depth

to be laid 90 cms. under ground for laying of cable below ground / road

surface for enclosing cable and back filling the same to make ground as

per original. (A) For Outer dia. 50 mm and Inner dia. 38 mm. (Test

Certificate to be Submitted)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

55 Supplying and erecting approved make Octagonal pole made from HR 10.00 Each 7609.00 Rupees Seven Thousand Six

sheet steel. The pole should be made as per IS. and shall be coated Hundred Nine Only

with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend

local wind speed with integral Junction box with Hot Deep Galvanised

door having 2 nos. 180° operated hinges & 2 nos. Ln key locking with

silicon rubber gasket. Consist of terminal plate of min 6mm Hylam

sheet, standard profile 35 mm X 7.5 mm Din-Rail & MCB, Brass stud

type terminal and arrangement for cable termination to be erected on

RCC foundation as per details given by manufacturer and EIC

considering site requirement.Octagonal Pole Foundation (1) Grade of

RCC 1:2:4, (2) Grade of steel rainforcement of RCC FE 415, (3) Clear

cover to rainforcement 50mm, (4) Concrete vibrated, (5) use suttering /

farma(6) Foundation Colour Same As Building Colour outside Shade (7)

Detail drawing will be given by corporation (C) 5 Mtr. Long 70 mm Top

X 130 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600 mm long hot deep galvanized J-Bolt,

nuts, washers with 800 mm under ground and 200 mm above ground

level as per details given by manufacturer and EIC considering site

requirement. Approx Pole weight 46 kg.(Make:- Bajaj, Valmont,

Transrail, Ambica, RR Ispat Only Only) (Test certificate to be submitted)

.Approx Pole weight 46 kg

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

56 Providing and Fixing of wall and terrace bracket consisting of ISI mark 10.00 Each 487.00 Rupees Four Hundred Eighty Seven

"B" class G.I. Pipe 4.2 cm outside diameter and length suitable for Only

building face for fixing the brackets and having spread of Upto

mtr. length with suitable degree angle as per site situation suggested by

EIC. vertical plane and suitable welded stiffner reducer and nipple with

check nut complete painted with one coat of red oxide and two coats of

alluminium paint with . complete with 150*150*2mm thick G.I plate with

4no heavy duty galvanized jasti khila of required size or Single arm

bracket (pipe in pipe type) suitable for terrace as per design given by

EIC Considering parfait, height ,width and total height of building and

type of led fitting . For single arm bracket. (Jindal / Asian / Tata / Surya

Prakash make Only) (Fabricators:- Bajaj, Valmont, Transrail, Ambica,

RR Ispat Only) (Test certificate to be submitted) ( For Wall/Terrace

Street Light Fitting-Bracket )

57 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 10.00 Each 487.00 Rupees Four Hundred Eighty Seven

4.2 cm outside diameter complete with suitable G.I. Sleeve tubing of 2 Only

mm. thick and required size and length suitable for 76.5 / 80 mm.

required size of pole top or pipe in pipe surface for terrace as per

instruction of EIC or wall bracket as per instruction of EIC having nuts

and bolts for fixing the brackets and having spread of Upto 0.50 mtr.

length with suitable rise as per site condition and suitable welded

stiffner reducer and nipple with check nut complete painted with one

coat of yellow zinc and two coats of alluminium paint for Single arm

bracket suitable for pole or terrace as per design given by EIC. For

single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:- Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test

certificate to be submitted)

58A Supplying & erecting approved make SMC press moulded composite 10.00 Each 890.00 Rupees Eight Hundred Ninety Only

FRP. loop-in, loop-out approx. 2mm thick box complete with bakelite

connector strip 4way & hinged doors having locking arrangements with

mounting clamp with nuts, bolts & washers suitable for erection on pole

with cable clamps& earth bolt of following size of box.For (A) 300mm x

200mm x 100mm [deep]

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

58B (D) 140 x 140 x 100mm [deep] 4.00 Each 295.00 Rupees Two Hundred Ninety Five

59 SITC of Outdoor aesthetically designed LED Street Light Luminaire with 10.00 Each 4406.00 Rupees Four Thousand Four Hundred

total consumption of max. 55 Watts with single piece heavy duty & Six Only

sufficient size of die cast aluminium housing to accommodate driver,

both SPD and necessary wiring and terminal easily inside the housing.

High power LEDs wattage of 5 Watt (Driving current of LED should be

max. 80Pct. of Rated current) shall be mounted on high quality metal

core PCB with extremely precison designed heat sink complete with

IP66 protection. LED lense are covered with thoughened glass /

premium cluster Lens for better light distribution. The fixture should be

suitable for pole/bracket mounting. The fixture should be complied with

both LM79 and LM 80 certified. LED module should be tested L70 at

50,000 hrs ( All Test Certificate must be submitted with RA bill). LED

fitting provided with high quality potted driver with Metal housing and

protection against high and low Voltage cut Off, Protection against

440V. Driver should have protection like over current, over voltage,

short circuit and operational in the temperature range of 0 deg to 50 deg

and humidity range of 10Pct. to 90Pct. RH. THD of driver should be less

than 10Pct. and P.F greater than 0.95. The Fixture should meet the

technical criterias like Operating Voltage range 180 to 270 V, total

lumens of fitting not less than 7500, CCTgreater than 4K/6K as per site

requirement & decided by EIC, CRI greater than 65, beam angle

deg, surge immunity level at least 4 KV integral and 10 KV non integral.

(Note:- The manufacturer / authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture)

60 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv 150.00 Mtr. 58.00 Rupees Fifty Eight Only

grade ISI marked copper wires of following size to be erected as

directed. 3 core 1.5 sq.mm. PVC insulated round copper wire ISI mark.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

61 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv 100.00 Mtr. 96.00 Rupees Ninety Six Only

grade ISI marked copper wires of following size to be erected as

directed. 3 core 2.5 sq.mm. PVC insulated round copper wire ISI mark.

62 Providing , erecting Universal Astro Intelligent streetlight control system 1.00 EACH 18406.00 Rupees Eighteen Thousand Four

Insu with weather Proof box for Indoor application 5 KVA (As Per Hundred Six Only

Atteched Technical Specification)

63 Providing and fixing of ABC Type Store Pressure Fire Extinguisher 12.00 Each 1991.00 Rupees One Thousand Nine Hundred

Having capacity 6 kg Filled with Mono Ammonium Phosphate Powder Ninety One Only

50% confirms to IS 4308, Stored Pressure Type, UGTS Pressure

Gauge, Can Height 530 mm, Diameter 150 ± 10mm, Discharge Time

24 Sec, Controllable discharge mechanism, Jet Range 5 Meters,

Average Discharge is 92%, applicable on Class A,B & C and electrically

started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn &

CO2 Mig welded, EPDM(Ethylene Propylene Diene Monomer) Rubber

Hose with both end Aluminum clamped, Internal Coating - Epoxy

Powder coating, External Coating - Pure Polyester Powder coating (UV

Resistant),Brass forged CE Marked valves with NRV & Auto Safety

Release with safety Pin is of SS material, Made up from 1.6mm thick

sheet, Extinguishers confirmed to IS 15683:2018 and ISI marked.

Referance Weight:-Gross Weight 8.9 Kg, Empty Weight 2.9 Kg,

Necessary certificate & and guarantee must be attached, 2. OEM has

to provide wall mounting heavy duty bracket/clamp, screw, hardware

for installation. 3.Following printed marking Manufacturing Date and

Expiry Date must be mention on Extinguisher 4. Refilling period must

be of 3 Years. Following Printed marking on equipment must be

required:- Model No, Capacity, Gross Weight, Content, Fire Rating,

Batch No, Serial no, Mfg Month, Refilling Due. [with necessary

numbering / marking with oil paint by painter as instructions given by

G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, ,CEASEFIRE)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

64 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire 12.00 Each 6526.00 Rupees Six Thousand Five Hundred

Extinguisher, filled with Co2 Gas as per IS 15222, Control discharge Twenty Six Only

mechanism fitted with 1 Meter Wire Braided Hose & Electrical non-

conductor Polyethylene Flat Horn with Diffuser Nozzle for dispersed

discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%,

Applicable on Class B, C and electrically started Fire, Fire Rating 55B,

Internal coating is not applicable & External coating is of enamel spray

painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked,

CO2 Cylinder construction: hot spinning by seamless pipes & bearing

ISI mark, Body confirms to IS 7285 and PESO ( Petroleum and

Explosives Safety Organization) APPROVED, Minimum Wall

Thickness 4 to 4.2 mm, Extinguishers confirmed to IS 15683:2018 and

ISI marked. Referance Weight:-Gross Weight 16.4, empty weight

Kg, 1. Necessary certificate & and guarantee must be attached,

OEM has to provide wall mounting heavy duty bracket/clamp, screw,

hardware for installation. 3.Following printed marking Manufacturing

Date and Expiry Date must be mention on Extinguisher 4. Refilling

period must be of 5 Years. Following Printed marking on equipment

must be required:- Model No, Capacity, Gross Weight, Content, Fire

Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with necessary

numbering / marking with oil paint by painter as instructions given by

G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX,CEASEFIRE)

65 Providing, erecting, fabricating the M.S. structure as per requirement of 100.00 kg 77.00 Rupees Seventy Seven Only

site as per structure design Including proper size approved by EIC of

M.S. angles, flats, bars, square pipe, channels, sections (Tata, Jindal,

Asian, JSI Make) complete with cutting, welding, grinding and finishing

duly painted with Asian/Nerolac make premium quality oil paint and true

care red oxide metal primer,asian paint make with erection on site as

per direction of engineer in charge with necessary grouting cementing,

plastering and finishing complete. All hole opening of square pipe end

must be closed with M.S plate welding. Payment will be done on KG as

per Actual weight.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

66 Dismantling the existing switchgears, DB and Busbar of any size 20.00 Each 7.00 Rupees Seven Only

complete with / without board or angle iron frame.

67 Dismantling the existing any type of indoor light fittings. 500.00 Each 5.00 Rupees Five Only

68 Dismantling the existing light, fan, bell, , independent plug point, wiring 10000.00 Point 1.00 Rupee One Only

with mains of all types along with accessories etc. complete and handed

over to dept.

69 Dismantling the existing cables of all types & sizes. 5000.00 Mtr. 6.00 Rupees Six Only

Signature of Contractor Executive Engineer (Ele)

GSPHCL Gandhinagar