Drilling of Tubewell and Improvement/Augmentation of LWSS Nagal Suketi in GP KalaAmb in Tehsil Nahan Distt. Sirmour

Amount

Excavation in foundation and trenches etc. in earth work in all kinds of soil containing spade work , blasting work, jumper workincluding decomposed hard and soft rocks etc. with all lifts,stacking the excavated soil not more than 3 mtr. Clear from the edge of excavation and then returning the same in 15 cm. layers whenever required in sides of foundation and plinth ,consolidating each deposited layer by ramming and watering and than desposing of all surplus excavated soil with in all lead and lifts, complete in all respects and as directed by The Engineer-Incharge.

Providing and laying cement concrete 1: 4: 8 (1cement :4 sand :8 graded stone aggregate 40 mm nominal size ) and curing complete but excluding the cost of form work in foundation and plinth, in all height and depth including all leads, lifts and carriage of material at site and as directed by The Engineer-Incharge.

Providing and laying Reinforced cement concrete 1: 1.5: 3 (1cement :1.5sand :3 graded stone aggregate 20 mm nominal size) and curing complete but excluding the cost of form work and reinforcement for RCC work in :

A) In foundation and plinth etc.

Providing and laying Reinforced cement concrete 1: 1.5: 3 (1 cement :1.5 sand :3 graded stone aggregate 20 mm nominal size) and curing complete but excluding the cost of form work and reinforcement for RCC work in :

A) Vertical surfaces such as walls of any thickness but not than 0.1 mtr. Thick, including attached pilasters, buttresses, plinth and string courses etc. from top of foundation upto floor two level including all leads, lifts and carriage of material at site and as directed by The Engineer-Incharge.

Providing and laying Reinforced cement concrete 1: 2: 4 (1cement :2 sand :4 graded stone aggregate 20 mm nominal size) and curing complete but excluding the cost of form work and reinforcement for R. C. C. work in :

A) Suspended floors, roofs, beams, girders, bressumers, landing, shelves and their supporting balconiesetc. Upto floors two level.

Providing Tor Steel reinforcement fpr RCC work including bending, binding and placing in position complete upto floor two level complete in all respect including all leads, lifts and carriage of material at site and as directed by The Engineer-Incharge.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm so as to give afair finish including centring, shuttering, sturtting and propping with wooden ballies etc.the height of propping and centring from supporting floor to ceiling not exceeding 4 mtr. And removal of the same for insitu RCC and plain concrete work in :-

A) Vertical surfaces such as walls of any thickness, partition walls and the like including pillasters, butteresses, plinth and string courses and the like.

B) Flat surfaces such as soffits of suspended floors, roofs and landing etc. floors upto 200 mm in thickness.

Providing and fixing cast iron manhole cover with frame (medium duty) 500 mm dia, the weight of cover and frame not be less than 23 Kg including all leads, lifts and carriage of material at site and as directed by The Engineer-Incharge.

Excavation in drains and channels etc. in earth work in all kinds of soil such as Kankar Moorum,Shingles, Conglomerate saturated soil decomposed or soft rock & hard rock by blasting including dressing of sides and beds,disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and then returning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of the Engineer Incharge.

Laying and jointing GMS pipes of following dia & class including all jointing material etc. (earth work to be measured and paid for separatly) complete in all respect including of all leads, lifts and carriage of material at site and as directed by the Engineer-Incharge.

50 mm dia. (L)

40 mm dia. (L)

32 mm dia. (L)

25 mm dia. (L)

Providing and fixing of brass full way valves with wheel of approved make & relevent ISS complete in all respect , including of all leads, lifts and carriage of material at site and as directed by the Engineer-Incharge.

50 mm dia.

40 mm dia.

32 mm dia.

25 mm dia.

imIMRAN SHAH