DEPOSIT URBAN AGGLOMERATION 2021 23 PACKAGE 1 POONKULAM WARD LAYING NEW PIPE LINE AND ALLIED WORKS AT VARIOUS PLACES UNDER VANDITHADAM SECTION

Amount

PIPE LAYING WORKS

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.9.5:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 50 mm nominal outside diameter pipes.

100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes.

18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

OD181706/2022-2023:Interconnection to the existing PVC/AC/CI/GI pipe to the newly laid PVC /AC/CI/GI using convinient specials like PVC/AC/CI Tee,Reducer etc ,including earth work excavation, and all labour charges excluding the cost pipe and specials etc

OD181707/2022-2023:Alteration of house connection from the existing main up to 200 mm PVC/AC/CI Pipe , boring the main, supplying and fitting suitable specials etc. and connecting the newly laid main, testing the joints etc. complete as per the direction of Engineer incharge

OD181708/2022-2023:Taking connection from the existing main(Single boring), up to 200 mm PVC/AC/CI Pipe , boring the main, supplying and fitting suitable specials etc. and connecting the newly laid main, testing the joints etc. complete

100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

OD181709/2022-2023:Construction of Valve Chamber of size 1.3*1.3 by Earthwork in excavation by mechanical means/manual means in foundation trenches including dressing of sides and ramming of bottoms, lift upto 1.5m, Cement concrete 1:4:8 using 40mm metal for the foundation footing of the chamber, Reinforced cement concrete 1:2:4 using 20mm metal for the side walls including centering and shuttering and plastering of the chamber, etc. complete as per the direction of Engineer in charge.

OD181710/2022-2023:PROVIDING PROTECTION TUBE FOR SAFETY OF VALVE INCLUDING ALL LABOUR CHARGES ,COST OF MATERIALS ETC

ERRRECTION OF PUMP SET AND CONSTRUCTION OF STEEL STRUTURE AND PVC TANK

OD188733/2022-2023:Supplying ,Erecting and commissioning of 3HP Submersible pump set of rpm of 3000 and head of 10m including panel board with soft starter ,NRV valve , Electronic flow meter , controlling valve , cables for connecting including all labour charges warrenty up to 2 years

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.3:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelCold twisted bars

50.6.6.2:Hollow block masonry using pre cast solid blocks (factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure up to floor two level for 10 cm thick wall in: CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD188739/2022-2023:Supplying and fixing iron square tubular frame with 16mm gauged of iron sheet for door in opening of room including cost of iron square tubular frame and 16mm gauged sheet, iron hinges, lock .two step epoxy paining .including all labour charges welding charges etc

OD188735/2022-2023:SUPPLYING AND FIXING ISI MARKED PVC WATER TANK

OD188736/2022-2023: Angle iron structure - size of 3 inch and 2 inch angle iron 6 mm thickness at the height of 7m ( on Five- legs )- from top to bottom and for supporting the pvc tank -supplying fixing and convenient sizes of GI plate for supporting the pvc tang, providing Angle iron ladder, including cost of materials , welding charges , fixing charges , two coat epoxy panting the structure etc

OD188738/2022-2023:AUTOMATION WORK OF SUBMERSIABLE PUMPSET TWO NOS (ONE STAND BY)- USING WITH SIM CARD FECILITY - ICLUDING ALL LABOUR CHARGES AND COST OF MATERIALS ETC

OD188740/2022-2023:Supplying and fixing coregulated Teflon roofing sheet

OD189055/2022-2023:providing CCTV SURVILENCE including night mode vision in the tank site using sim car facility, recording etc including all labour charges, cost of accessories etc

OD189056/2022-2023:supplying 4sqmm copper cabele

OD189058/2022-2023:SUPPLYING FIXING WATER LEVEL INDICATOR

OD189078/2022-2023:SUPPLYING AND FIXING 65MM DIA GI POLES FOR FIXING THE LED LIGHT AT THE TANK SITE INCLUDING SUTABLE EARTH WORK, RCC BASE FOR FIXING THE GI POLE, COST GI PIPE , COST OF LED LIGHT WITH WIREING ACCESORIES ETC

SUPPLYING MATERIALS

100.98.223:Supply of PVC Pipe, 8kg/cm2, 90mm Dia.

100.98.457:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.

OD181711/2022-2023: Suppling CI MH Frame with cover

OD181712/2022-2023:SUPPLYING 25MM ASTM PIPE

OD189028/2022-2023:SUPPLYING 50MM ASTM PIPE

ARUNDAS Y R

Bidder Name

Vimal Kumar P

ARUNDAS Y R