GE AF/AMB-07/2021-22 REPAIRS / MAINTENANCE OF ELECTRICAL WIRING, DISTRIBUTION BOARDS AND ALLIED ITEMS IN MD AND OTM ACCOMMODATIONS IN DOMESTIC AREA AT AF STATION AMBALA UNDER GE (AF) AMBALA

Amount

Taking down copper / aluminium point wiring (light, fan, socket or power) including fixture and fittings viz. switches, ceiling roses, light fittings, pendants, regulators, sockets, etc. and disposing off complete all as specified and as directed

M&L for concealed point wiring with 1.5sqmm, single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade with multi-stranded copper conductor, drawn through and including non-metallic rigid PVC conduit not less than 20mm dia and conduit accessories concealed on walls, ceiling etc., and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly, including cutting chases for conduit and sinking for box and making good to the surface to match the existing and MS sheet (1.6mm thick) sunken box or pressed steel terminal boxes with provision of 3mm thick plastic laminated sheet top cover complete all as specified and as directed for the following:

One light / ceiling fan / exhaust fan point controlled by one 6A one way switch

One switch socket outlet 3 pin 6Amps on independent board

One switch socket outlet 3 pin 5Amps on same board

One bell point controlled by one bell push

One light point controlled by two way switch

M&L for concealed point wiring with 2.5sqmm, single core PVC FRLS insulated, heavy duty, ISI marked, unsheathed cable 1100V grade with multistranded copper conductor drawn through and including non-metallic rigid PVC conduit not less than 20mm dia and conduit accessories, concealed in walls / roofs / floors / ceiling etc. and PVC insulated heavy duty, ISI marked, unsheathed copper conductor 1.5sqmm for earth continuity conductor and connected to common earth dolly including cutting chases for conduit and sinking for box and making good to the surface to match the existing and MS sheet (1.6mm thick) sunken box or pressed steel terminal boxes with provision of 3mm thick plastic laminated sheet top cover for one switch socket combination outlet 5 pin 15/16Amps multipurpose complete all as specified and as directed

M&L for concealed point wiring with 1.5sqmm, single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100volts grade with multi-stranded copper conductor, drawn through existing PVC conduit, concealed on walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly complete all as specified and as directed for the following:

One light / ceiling fan / exhaust fan point controlled by one 6A one way switch

One switch socket outlet 3 pin 6Amps on independent board

One switch socket outlet 3 pin 5Amps on same board

One bell point controlled by one bell push

One light point controlled by two way switch

M&L for concealed point wiring with 2.5sqmm, single core PVC FRLS insulated, heavy duty, ISI marked, unsheathed cable 1100V grade with multistranded copper conductor drawn through existing PVC conduit, concealed in walls / roofs / floors / ceiling etc. and PVC insulated heavy duty, ISI marked, unsheathed copper conductor 1.5sqmm for earth continuity conductor and connected to common earth dolly for One switch socket combination outlet 5 pin 15/16Amps multipurpose complete all as specified and as directed

M&L for point wiring with 1.5sqmm, single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade with multi-stranded copper conductor, drawn through and including PVC casing capping not less than 20mm wide and accessories surface on walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly with MS sheet (1.6mm thick) sunken box or pressed steel terminal boxes with provision of 3mm thick plastic laminated sheet top cover complete all as specified and as directed for the following:

One light / ceiling fan / exhaust fan point controlled by one 6A one way switch

One switch socket outlet 3 pin 6Amps on independent board

One switch socket outlet 3 pin 5Amps on same board

One bell point controlled by one bell push

One light point controlled by two way switch

M&L for point wiring with 2.5sqmm, single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade with multi-stranded copper conductor, drawn through and including non-metallic rigid PVC casing capping not less than 20mm wide and accessories surface on walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly with MS sheet (1.6mm thick) sunken box or pressed steel terminal boxes with provision of 3mm thick plastic laminated sheet top cover for one switch socket combination outlet 5 pin 15/16Amps multipurpose complete all as specified and as directed

S&F switch piano flush modular type, single pole, ISI marked, one way 5A, 230V complete all as specified and as directed

S&F switch piano flush modular type, single pole, ISI marked, one way 15A, 230V complete all as specified and as directed

S&F socket outlet, 3 pin, multipurpose 6A modular type, ISI marked, 230V complete all as specified and as directed

S&F socket outlet, multi-purpose, 3 pin, 16A, and 1 pin 6A, modular type, ISI marked, 230V controlled by one switch complete all as specified and as directed

S&F electronic fan regulator, stepped modular type (5 steps), 120W, 1 module, 50Hz, 230V, ISI marked with cover plate duly connected up complete all as specified and as directed

S&F electronic fan regulator, stepped modular type (5 steps), 120W, 2 module, 50Hz, 230V, ISI marked with cover plate duly connected up complete all as specified and as directed

S&F electronic fan regulator, stepped type (5 steps), 100W, 50Hz, 230V, ISI marked duly connected up complete all as specified and as directed

S&F modular white cover plate with frame ISI marked complete all as specified and as directed suitable for the following:

2 modules

3 modules

4 modules

6 modules

8 modules

S&F modular metal flush box ISI marked complete all as specified and as directed suitable for the following:

2 modules

3 modules

4 modules

6 modules

8 modules

S&F switch piano flush button type, single pole, ISI marked, one way 6A, 240V complete all as specified and as directed

S&F switch piano flush button type, single pole, ISI marked, two way 6A, 240V complete all as specified and as directed

S&F switch piano flush button type, single pole, ISI marked, one way 15A, 240V complete all as specified and as directed

S&F socket outlet, 5 pin, multipurpose 5A flush type, ISI marked, 240V complete all as specified and as directed

S&F socket outlet, 2 in 1, 3 pin, multipurpose 5&15A flush type, ISI marked, 240V complete all as specified and as directed

S&F ceiling rose surface bakelite 65x50mm, ISI marked, with three terminals complete all as specified and as directed

S&F PVC lamp holder, insulated body, bracket holder / angle holder 240V complete all as specified and as directed

S&F lamp holder, brass body, bracket holder / angle holder / supended type, 240V complete all as specified and as directed

S&F bell push flush button type, 5A, 240V complete all as specified and as directed

S&F bell buzzer, ding dong type, 230V, single pole complete all as specified and as directed

S&F bell buzzer, 230V, single pole complete all as specified and as directed

S&F in repairs PVC plate round cover 4" to 6'' dia of approved colour complete all as specified and as directed

S&F driver 230V suitable for 40/45W LED garden lights of existing make and type complete all as specified and as directed

S&F driver 230V suitable for 45/60W LED light fittings of existing make and type complete all as specified and as directed

S&F driver suitable for LED strip of 1/3/5W of existing make and type complete all as specified and as directed

S&F LED strip 1W flexible type warm white in colour 10mm width of approved deisgn, make and type complete all as specified and as directed

S&F LED strip 1W flexible type warm yellow in colour 10mm width of approved deisgn, make and type complete all as specified and as directed

S&F in repairs 3mm thick hylam sheets duly fixed complete all as specified and as directed of the following sizes:

6x6inch

6x9inch

6x11inch

10x12inch

11x13inch

12x14inch

S&F LED tube light fitting 1x18W, 230V, having PF>0.9, input voltage 90 to 300V, IP-65 stranded luminaries efficiency 100lumen/W, CRI> 70, L 70, in commercial channel with powder coated CRCA sheet housing with opal diffuser for LED with LED tubelight with high efficient LED in aluminium housing with clear & milky diffuser with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with suitable size rod including taking out and disposing old fitting any type complete all as specified and as directed

S&F in repairs indoor decorative LED batten with opal diffuser with inbuilt LED tube 10W and driver designed with high transmitting optics for even light distribution IP 20 degree protection having length 620mm with PF>0.9, input voltage 90 to 300V, IP-65 stranded luminaries efficiency 100lumen/W, CRI> 70, L 70 and connecting with twin core twisted flexible copper conductor cable complete all as specified and as directed

S&F in repairs recess/surface mounting LED flat panel 2'x2' with high efficient LED & glare free full window opal diffuser of 36W, PF>0.9, input voltage 90 to 300V, IP-65 stranded luminaries efficiency 100lumen/W, CRI> 70, L 70 with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with suitable size rod complete all as specified and as directed

S&F in repairs LED bulk head 10W with pressure die cast aluminium housing high efficient LEDs and enclosed with milky diffuser IP 66 protection, PF 0.9 , CRI> 70, L 70 with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable complete all as specified and as directed

S&F inverter type type LED tube light fitting 20-22W, integrated batten with inbuilt lithium ion-battery with minium 4hour back up, PF >0.9 ,input voltage 90-300V, IP-65, LM 80 standard luminaries efficiency 100 lumen/watt, 230V with all accessories and tube rod and taking down old fitting from any position complete all as specified and as directed

S&F LED inverter technilogy 9W, with minium 4hour back up, with efficiency more than 100 lumen/watt and lithium ion battery 230V with all accessories and tube rod and taking down old fitting from any position complete all as specified and as directed

S&F LED tube rod 1x18W, PF >0.9, input voltage 90-300V, IP-68, LM 80 stranded luminaries efficiency 100 lumen/watt, 230V with all accessories and taking down old fitting from any position complete all as specified and as directed

Supplying, installation and testing water proof fountain light 23W (in combination of 06Nos LED bulb) of approved design suitable for fixing to 40mm pipe with suitable driver, with all accessories pre-wired including connecting with twin core twisted flexible copper conductor cable and taking down and disposing off old unserviceable light fittings complete all as specified and as directed

Supplying, installation and testing LED bush light 6W (warm white) and input voltage 230VAC, 50Hz with cast aluminium housing with toughened glass IP-66 including fixing arrangements into wall/ pillar with necessary connection of suitable sized copper conductor cable and and taking down and disposing off old unserviceable light fittings complete all as specified and directed

S&F in repairs aesthetically disigned LED post top lantern 15W, input voltage 230VAC, 50Hz with die cast aluminium spigot & prismatic diffuser, IP-65/66 protection class including fixing arrangment like suitable clamps, nut, bolts and washers and connecting up with suitable sized of copper conductor cable complete all as specified and as directed

S&F LED light fitting 45W with lamp, with input voltage 110 to 280V, alongwith auto-shutdown on high voltages, life min-5000hrs, operating temperature 1 to 50o, IP-66 protection class, comprising of rectangular shaped pressure die cast aluminium housing with weather proof gasket for lamp and driver compartment, system wattage of 100W=10%W, with rated lumens of minimum 500lumens with 120o view angle, constant driver current having THD<10%, power factor >0.95, with short circuit protection, reverse circuit protection, high voltage protection, 10kV high surges, having secondary optics with perfectly matched lenses conforming to IEC60598 / IS10322 with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable and taking down and disposing old fitting complete all as specified and as directed

S&F in repairs recess mounting low height backlit round LED down light of 15W of existing make/model complete all as specified and as directed

S&F in repairs recess mounting low height backlit round LED down light of 18W of existing make/model complete all as specified and as directed

S&F in repairs recess mounting low height backlit square LED down light of 6W of existing make/model complete all as specified and as directed

S&F in repairs recess mounting low height backlit square LED down light of 3W of existing make/model complete all as specified and as directed

S&F in repairs LED post top made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP 65 protection of 40W with necessary connection of multistranded copper conductor complete all as specified and as directed

S&F in repairs gang box suitable for mounting of 6/16A switches / sockets with necessary copper conductor cable complete all as specified and as directed of the following sizes:

2 modules

4 modules

6 modules

8 modules

12 modules

S&F check valve, brass of size 15/25/32mm dia suitable for pressure pump of capacity 0.5 -1.0HP as per existing including taking down and disposing off old valve complete all as specified and as directed

Supplying, fixing in position, installing and testing pressure pumps 0.5HP, single phase, 230V including taking up/down old unserviceable pressure pump and disposing off complete all as specified and as directed

S&F in repairs electronic choke 36W complete all as specified and as directed

S&F auto-cut pressure release valve suitable for pressure pump of capacity 0.5 -1.0HP as per existing including taking down and disposing off old valve complete all as specified and as directed

S&F in repairs starter 36/40W, suitable for 36/40W tube light working on 220-240V complete all as specified and as directed

S&F in repairs starter 4-22W, 110-130V in single, 4-22W, 220-240V in series suitable for 18W, 2ft, 4x18W recessed mounting fitting complete all as specified and as directed

S&F in repairs casing caping of size 20mm wide with all necessary fittings viz. bends, angles, stoppers, etc. complete all as specified and as directed

S&F LED lamp 10W tubular, 230V complete all as specified and as directed

S&F LED lamp 7W tubular, 230V complete all as specified and as directed

S&F CFL 4 pin, 36W complete all as specified and as directed

S&F 18W tube rod, 2ft long of existing type complete all as specified and as directed

M&L for disconnecting, dismantling and taking out pressure pump of capacity 0.5 -1.0HP at site, transporting to reputed workshop, rewinding the pressure pump with the same gauge of copper winding wire with same number of turns as existing and re-assembling the pump after carrying out necessary repairs, replacing unserviceable spares part like bushes, shafts, fasteners, bearings, capacitors and copper wire to ensure serviceable condition and refixing the same at original location complete all as specified and as directed Note: Spare parts, etc. required for repairing the pump as required shall be deemed to be included in the quoted rate

S&F in repairs sheet metal enclosures for 4 way MCCB incomer + 12 module outgoings, vertical type, TPN, load line distribution board with provision for mounting of MCCB 100A as incomer, double door IP 43 protection class conforming to IS 8623-III, with 160A rated bus bar, blanking plates duly flushed in wall and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs sheet metal enclosures for MCB distribution board 415V, TPN, 4 way, double door type, flushed inside wall with 200A rated bus bar and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs sheet metal enclosures for MCB distribution board 230V, SPN, 12 way, double door type flushed inside wall with 200A rated bus bar and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs sheet metal enclosures for MCB distribution board 230V, SPN, 8 way, double door type flushed inside wall with 200A rated bus bar and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs sheet metal enclosures for MCB distribution board 230V, SPN, 4 way, double door type flushed inside wall with 200A rated bus bar and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs MCCB, FP TPN, 415V, 100A, 16kA complete all as specified and as directed

S&F in repairs MCB TPN, 415V, 63A, 10kA complete all as specified and as directed

S&F in repairs MCB SPN, 240V, 5 to 40A, 10kA, 'B' curve, finger proof terminal, bi-connect termination, 35sqmm terminal capacity, insulated sliding shutter with large two position dolly complete all as specified and as directed

S&F in repairs MCB SPN, 240V, 63A, 10kA, 'B' curve, finger proof terminal, bi-connect termination, 35sqmm terminal capacity, insulated sliding shutter with large two position dolly complete all as specified and as directed

S&F in repairs MCB SP, 240V, 5 to 32A, 10kA, 'B' curve, finger proof terminal, bi-connect termination, 35sqmm terminal capacity, insulated sliding shutter with large two position dolly complete all as specified and as directed

S&F in repairs MCB SP, 240V, 40 to 63A, 10kA, 'B' curve, finger proof terminal, bi-connect termination, 35sqmm terminal capacity, insulated sliding shutter with large two position dolly complete all as specified and as directed

S&F in repairs double pole, 100mA, RCCB of 40A capacity for earth leakage protection 240V, with sliding shutter, large two position dolly, ISI marked, duly fixed on existing DB complete all as specified and as directed

S&F in repairs double pole, 300mA, RCCB 40A capacity for earth leakage protection 240V, with sliding shutter, large two position dolly, ISI marked, duly fixed on existing DB complete all as specified and as directed

S&F in repairs plug top, 5A capacity 240V, single phase including connecting up complete all as specified and as directed

S&F in repairs plug top, 15A capacity 240V, single phase including connecting up complete all as specified and as directed

S&F in repairs metal clad socket outlet with single pole and neutral enclosure with two pin and earth plug socket with and inlcuding one SP MCB 20A 10kA complete all as specified and as directed

S&F PVC body, air freshner 220/230mm sweep single phase 230V including louvers and fixing arrangement as per site requirement complete all as specified and as direcected

Supplying, fixing / laying in repairs PVC insulated aluminium conductor cable, 2 core 6sqmm, flat, solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed, 1100V grade heavy duty in service connections complete all as specified and as directed

Supplying, fixing / laying in repairs PVC insulated aluminium conductor cable, 2 core 10sqmm, flat, solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed, 1100V grade heavy duty in service connections complete all as specified and as directed

S&F in repairs PVC 2 core chord, flexible copper insulated cable 23/076mm size black/grey in colour and fixed / laid complete all as specified and as directed

S&F in repairs PVC insulated unsheathed FRLS single core multi-stranded copper conductor cable laid / fixed complete all as specified and as directed of the following sizes:

S&F microprocessor based three phase electronic tamper proof, CT operated with CT ratio of 500/5 energy meter for LT supply with optical communication port, accuracy class 0.5 voltage 3x240V, 1/5A conforming to IS: 13779 complete all as specified and as directed

S&F microprocessor based three phase electronic tamper proof energy meter of rating 10 to 60A with optical communication port conforming to IS: 13779 complete all as specified and as directed

M&L for submain wring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 4sqmm and 1 run of 2.5sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC conduit 25mm bore, heavy duty, ISI marked fixed on wall/ceiling, etc. with all required accessories including taking down old sub-main wiring any type complete all as specified and as directed

M&L for submain wring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 6sqmm and 1 run of 4sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC conduit 25mm bore, heavy duty, ISI marked fixed on wall/ceiling, etc. with all required accessories including taking down old sub-main wiring any type complete all as specified and as directed

M&L for submain wring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 10sqmm and 1 run of 6sqmm multistranded, copper conductor cable 1100volts green colour for earth conductor drawn through and including PVC conduit 32mm bore, heavy duty, ISI marked fixed on wall/ceiling, etc. with all required accessories including taking down old sub-main wiring any type complete all as specified and as directed

Notes for item Nos. 127 to 129: (i) 2 runs of 4/6/10sqmm main cable, 1 run of earth conductors and 1 run of PVC conduit as per item shall be measured as one length (ii) Separate conduit shall be used for each sub-main wiring circuit irrespective of numbers of wire (iii) The minimum size of conduit shall be as stipulated, however higher sizes shall be used as per number of cables passing through. The Engineer-in-charge shall ensure for proper size of conduit as per requirement at site

M&L for earthing using GI earthing wire with galvanised steel earth plate electode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level connection to and including GI earth lead wire 4mm dia extended to 7.5m as earth lead by means of GI bolts, nuts, etc. with provision of charcoal and salt all as per electrical plate No. 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade), earth lead protection pipe 50mm madium grade with bends, elbow, etc. from earth plate to test point, excavation and earthwork in any type of soil, returning, filling, ramming and removing of soil to distance not exceeding 50m, make good to match with existing surface making PCC pit (earth chamber) having internal size 300x300x300mm and outer size 600x 600x600mm with RCC reinforced cover 50mm thick and testing on completion including making test points on wall as per SSR specifications, taking down and disposing off old earthing complete all as specified and as directed

Notes for serial item Nos. 131: (i) The cost of GI earth continuity wire / strip with GI pipe 20mm medium grade upto 7.5m is deemed to be included (ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item (iii) Earthing shall produce desired earth resistance values as directed by the Engineer-in-charge

unique power & control system

Saurav Enterprises

M/S Sonu Traders

Baliyan Electrical Works

The Rahul Vig

gurchan singh & sons.