Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-Finance BANIKHET NAVEEN KUMAR BANIKHET CHAMBA HIMACHAL PRADESH 176303 | CHAMBA | HIMACHAL PRADESH | 176303 | L1 | Accepted-Finance L1 | |
| 2 | L2₹1.9 L+₹7,100 (3.91%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹1.9 L+₹12,600 (6.93%)Rejected-Finance | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | NAVEEN KUMAR L1 | SETHI KUMAR L2 | Mukhtyar Mohammad L3 |
|---|---|---|---|---|---|---|
| 1.00 | Transportatioin of suitable jeep for carriage the spare part of hand pump alongwith necessary accessories required during fifing/energisation of hand pump of hand pump to the site of work complete in all respects as per the direction of the Engineer-in-Charge in all leads and lifts. | 1 | Job | 4,700 ₹4,700 Lowest | 4,900 ₹4,900 | 5,200 ₹5,200 |
| 2.00 | Supply of submersible clear water pump set of reputed make such as KSB/Calama/SU/joinsion conforming to latest relevant BIS code. The pump should be fitted with free flow impellers of suitable alloys as per BIS 8034-1978 latest suitable for lifting clear water having 500 PPM turbidity, grease packed bearings and shaft with wound stator on motor side and with shaft protection sleeve on pump side ensuring better life for shaft conforming to BIS specification. The pump shall be directly coupled to submersible squirrel cage electrical induction motor of same make conforming to BIS 9283-1979 (latest with up to date amendments) totally dust and water proof for submersible duly isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing plate to with stand non vertical load with minimum bear and tear. It should also be fitted with a device to take up expention of water with heating of motor. The pump should include water level guard,errection clamps,cable clips and depth gauge etc. and suitable for opration in data given | 5 | HP | 12,500 ₹62,500 Lowest | 12,600 ₹63,000 | 12,800 ₹64,000 |
| 2.01Discharge:- 5 LPS | ||||||
| 2.02Total Head:- 35 meters | ||||||
| 3.00 | Providing and Laying PVC jointless flat water proof cable 2.5mm Sq. as per BIS 694-1990 (latest with up to date ammendments) suitable for the pump sets offered from OCB to motor, motor to starter including all other electrical equipments such as Thimbles, flexible pipes, solder,nuts & bolts,cable glands etc. laid in pipes or trenches. The type,size & make will be subject to approval of HPSEB authorities.In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost. | 150 | Rmt | 320 ₹48,000 Lowest | 350 ₹52,500 | 380 ₹57,000 |
| 4.00 | Providing & fixing Starter delta starter with pannel, volatgae meter, amp meter & auto cut of reputed make such as L&T/ Havells / MEI conforming to BIS 8544 -1979 latest with up to date amendments for motor offered under item No 1 | 1 | Set | 13,500 ₹13,500 Lowest | 13,800 ₹13,800 | 14,200 ₹14,200 |
| 5.00 | Supply of Kirloskar/ Kilburn/ IVC/ Fouress/ Gled/BHEL/Leader/ of reputed make of suitable size cast steel double flanged ASA-150 sluice valve having size one step higer to delivery of pump and capable of with standing nominal seat pressure of 52 kg/cm^2 class ASA-300 65mm dia NOTE:- The sluice valve shall conform to BIS 780-1984 latest with up to date ammendments.However if the seat pressure exceeds the limits prescribed in BIS 780 then the sluice valves shall be of cast steel conforming to class 150 ASA (Seat pressure 21 Kg/cm^2) or class 300 ASA (seat pressure 52 Kg/cm^2) or class 600 ASA (seat pressure ) 104 Kg/Cm2as per BS 1414(API 600) . | 1 | Nos | 19,000 ₹19,000 Lowest | 19,500 ₹19,500 | 20,200 ₹20,200 |
| 5.01 | Supply of Kirloskar/ Kilburn/ IVC/ Fouress/ Gled/ BHEL/Leader of suitable size cast steel ASA-150 double flanged swing check type reflux valve having bye pass arrangement & size one step higher to delivery of pump for withstanding nominal seat pressure of 52 kg/cm^2class ASA-150 65mm dia NOTE:- The sluice valve shall conform to BIS 780-1984 latest with up to date ammendments. However if the seat pressure exceeds the limits prescribed in BIS 780 then the sluice valves shall be of cast steel conforming to class 150 ASA Seat pressure | 1 | Nos | 19,000 ₹19,000 Lowest | 19,500 ₹19,500 | 20,200 ₹20,200 |
| 6.00 | Erection of all items except item no. 5 (a) to (c ) i/c cost of tees,bends tapes & any others fittings required as per site conditions and as per direction of Engineer-in -Charge. | 1 | Job | 15,000 ₹15,000 | 15,600 ₹15,600 | 13,500 ₹13,500 Lowest |
Tender Value
Refer Docs
EMD Value
₹3,140
Closing Date
10 Sept 2025, 5:00 pmClosed
EE CHAUNTRA
EE JSD CTR
LWSS Neri Chimnu Langna in G.P Langna Tehsil Lad Bharol District Mandi H.P SHProviding , Supplying and Fixing of 1 set of 5 HP Submersible with its allied accessories at Tube well.
2025_HPIPH_113476_1
EE-CTR-TA-6719-68 dated 30.08.2025 Job No.1
Open Tender
Pumps/Motors
Item Rate
90 days
Joginder Nagar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
EE CHAUNTRA
₹3,140
31 Oct 2025
30 Aug 2025
11 Sept 2025
30 Aug 2025
10 Sept 2025
30 Aug 2025
Amount
Transportatioin of suitable jeep for carriage the spare part of hand pump alongwith necessary accessories required during fifing/energisation of hand pump of hand pump to the site of work complete in all respects as per the direction of the Engineer-in-Charge in all leads and lifts.
Supply of submersible clear water pump set of reputed make such as KSB/Calama/SU/joinsion conforming to latest relevant BIS code. The pump should be fitted with free flow impellers of suitable alloys as per BIS 8034-1978 latest suitable for lifting clear water having 500 PPM turbidity, grease packed bearings and shaft with wound stator on motor side and with shaft protection sleeve on pump side ensuring better life for shaft conforming to BIS specification. The pump shall be directly coupled to submersible squirrel cage electrical induction motor of same make conforming to BIS 9283-1979 (latest with up to date amendments) totally dust and water proof for submersible duly isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing plate to with stand non vertical load with minimum bear and tear. It should also be fitted with a device to take up expention of water with heating of motor. The pump should include water level guard,errection clamps,cable clips and depth gauge etc. and suitable for opration in data given
Discharge:- 5 LPS
Total Head:- 35 meters
Providing and Laying PVC jointless flat water proof cable 2.5mm Sq. as per BIS 694-1990 (latest with up to date ammendments) suitable for the pump sets offered from OCB to motor, motor to starter including all other electrical equipments such as Thimbles, flexible pipes, solder,nuts & bolts,cable glands etc. laid in pipes or trenches. The type,size & make will be subject to approval of HPSEB authorities.In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost.
Providing & fixing Starter delta starter with pannel, volatgae meter, amp meter & auto cut of reputed make such as L&T/ Havells / MEI conforming to BIS 8544 -1979 latest with up to date amendments for motor offered under item No 1
Supply of Kirloskar/ Kilburn/ IVC/ Fouress/ Gled/BHEL/Leader/ of reputed make of suitable size cast steel double flanged ASA-150 sluice valve having size one step higer to delivery of pump and capable of with standing nominal seat pressure of 52 kg/cm^2 class ASA-300 65mm dia NOTE:- The sluice valve shall conform to BIS 780-1984 latest with up to date ammendments.However if the seat pressure exceeds the limits prescribed in BIS 780 then the sluice valves shall be of cast steel conforming to class 150 ASA (Seat pressure 21 Kg/cm^2) or class 300 ASA (seat pressure 52 Kg/cm^2) or class 600 ASA (seat pressure ) 104 Kg/Cm2as per BS 1414(API 600) .
Supply of Kirloskar/ Kilburn/ IVC/ Fouress/ Gled/ BHEL/Leader of suitable size cast steel ASA-150 double flanged swing check type reflux valve having bye pass arrangement & size one step higher to delivery of pump for withstanding nominal seat pressure of 52 kg/cm^2class ASA-150 65mm dia NOTE:- The sluice valve shall conform to BIS 780-1984 latest with up to date ammendments. However if the seat pressure exceeds the limits prescribed in BIS 780 then the sluice valves shall be of cast steel conforming to class 150 ASA Seat pressure
Erection of all items except item no. 5 (a) to (c ) i/c cost of tees,bends tapes & any others fittings required as per site conditions and as per direction of Engineer-in -Charge.
SETHI KUMAR (BID ID -553303)
Mukhtyar Mohammad (BID ID -553358)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .