SPECIAL REPAIR TO BLDG NO P 135/05 TO 08 (OR MD ACCN) OF 973 AD REGT WKSP AT LL UNDER GE ARMY BARODA

Amount

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each complete.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc. 1.5 Sqm each complete.

S&F Pressed steel frames for doors with double rebates of size 125X60 mm including necessary fixing lugs, hinges, lock strike plate, etc; complete.

S&F Pressed steel frames for doors with single rebates of size 105X60 mm including necessary fixing lugs, hinges, lock strike plate, etc; complete.

M&L for cement concrete (1:3:6) type C-1 (using 20mm graded crushed sotne agg ) as in coping bed plate for hold fast, Frame Filling etc including necessary form work etc complete.

S&F factory made 35 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial and both side decorative lamination complete.

M&L factory made 35mm thick 2nd calss hard wood glazed and skeleton shutters, open rebated and prerpared to receive glass, gauge, etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing , glass etc. sizes of members of shutters as specified in SSR Part-I Section 8.20 (a) complete.

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheets, reinforced with MS square tube, supplying and fixing in opening as per specification and drawiing. The door frame shall be fixed to the wall using 75/100mm long MS screws complete.

M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip & 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitbale PVC sheet beading , and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete.

S&F stainlees steel butt hinges 100mm medium weight complete.

S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete..

S&F aluminium alloy handle 150 mm cast type anodised complete.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section complete.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebeats including jointing cleat for fixing etc, complete.

S&F anodised aluminium window shutters with gauzed or glazed, side hung/sliding type aluminium sections weighing 0.55 kg/m including necessary jointing cleats, sash bars, glazing clips, rubber neophrene packing anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long 01 no., handles 01 Nos in each shutter, 02 Nos hinges per shutter, etc as per manufactures instructions and trade practice complete.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm dia and fixed with tinned tacks of galvanized wire staples and wooden bedding complete.

S&F sheet glass 5 mm thick oridinary quality and glazing with rubber packing to sliding windows/ventilators in square not exceeding 0.50 sqm in each pane complete.

S&F rolled MS framed work for guard bars doors, gate and frames of angle with MS squre bars or other section with gusset plate, rail, brases etc and including either hooks, sliding bolts, tower bolts and hinges or steel hanging door fitting to be prepared for hanging and also fastening conforming to Fe 410-0 or 310-0 complete.

M&L for preparation of new wood and wood based surface of any description not otherwise descsribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete.

M&L for preparation of new steel or iron surface of any description not otherwise descsribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring etc complete.

M&L for providing and fixing factory made 18 (+0.70)mm thick PVC sheet one sided pre laminated sheet cabinet shutter. 18 mm(+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90o and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc & as per Manufacturers's speciifcations complete.

S&F aluminium anodized hasp and staple of size 100mm long, safety type complete & directed.

S&F magnet ball catcher of suitable size for cupboard shutters complete.

Demolition of brick/ stone masonry work built in cement mortar complete.

M&L brick work with old size sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4

M&L for brick work with old size sub class 'B' bricks built in CM (1:6) straight or curved exceeding 6mtr mean radius complete.

Taking down cement plaster from brick/concrete surface including scrubbing down with water etc complete .

M&L for 15mm thick rendering in CM 1:6 on brick work or concrete surface of wall, surface (Internal) finished even and smooth without using extra cement

M&L for 15mm thick rendering in two layer on brick work or concrete surface of wall (External) i.e. 5mm thick plaster in CM:1:4 mixed with & including WPC @ 3% by weight of cement finished even and smooth without using extra cement over 10mm thick plaster in CM 1:6 complete.

M&L for rendering 10mm thick on brick or concrete surface of ceiling in CM 1:4 surface finished even and smooth without using extra cement complete.

M&L for preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over 3mm thick wall care putty on wall complete.

M&L for prepartion of newly plastered surface of ceiling and applying three coat of white wash complete .

M&L for prepartion of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkaline resistant primer complete.

M&L for complete removal of exisiting treatment on wall surface and apply two coat of oil bound distemper over 3mm thick wall care putty and priming coat complete.

M&L preparation of old decoreted plastered surface of ceiling and applying one coat of white wash to match complete.

M&L preparation of old walls and applying one coat of cement base paint complete

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.

M&L for roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 kg of cement per Sqm complete.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exceeding 0.11sqm and n. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed out in white or coloured cement to match, laid over and including screed bed 15mm thick in CM 1:6 complete

M&L for glazed ceramic coloured wall tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick rendering in CM 1:4 complete.

M&L 25 mm thick cement concrete(1:2:4) type B-0 (using 12.5 mm gradded crushed stone agg ) surface finished even and fair to receive top finishes as leveling course complete.

Demolition of stone slab of any description or thickness in floor, aprons etc.Laid bedded and pointed in any mortar complete.

M&L for 16-18mm thick green marble work (table rubbed & polished) in one piece machine cut as in cooking plate form, steps, window cills and like in CM 1:4 screed bed 15mm thk including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete.

M&L for rounding to edges of stone slabs such as steps cooking platefrom and other similar situations complete

Demolition of cement concrete (Unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level).

M&L for cement concrete 75mm thick PCC 1:3:6 type C-1 (20mm graded crushed stone agg ) surface finished even and smooth without using extra cement as in plinth protection complete .

M&L 100 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone agg ) as in sub base complete.

M&L for machine vibrated coloured chequred cement concrete tiles 30cm x 30cm x 25 mm thick set and jointed in neat cement slurry and pointed with grey cement and pigment over and including 15mm thick screed bed or bedding layer in CM 1:4 complete

M&L machine cut kota stone slab flooring 18-20mm thick Size not less than 550 x 550 mm over base laid and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

All as per item No 50 but as in skirtig/dado, steps of stairs etc.

S&F in repairs 15 mm dia galvanised iron tubing (ISI marked) medium grade including all necessary fittings and fixed to wall / ceiling or laid in floor jointed with tuflon tape complete.

All as per item No 52 above but 20 mm bore.

M&L for Cutting chases for concealed pipe where required and pointing in CM 1:3 etc in brick wall for bore of pipe 15/20 mm complete.

S&F in repairs rotational moulded two layered polyethylene water storage tanks ISI Marked (cylindrical, vertical with closed top) 500 litre capacity hoisted and fixed in position complete.

S&F in repair 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete.

S&F in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete.

S&F in repairs sinks made of stainless steel 1mm thick with plugs, washers, waste cupling and PVC wastes pipe including bedding in Cement Mortar to dwarf wall or including fixing cantilever brackets &connecting unions to pipe overall size 495 mmx 420 mm bowl size 410 mm x 330 mm 160 mm complete.

S&F in repairs, stainless steel Plate Rack of best quality, made out of 0.80 mm thick stainless steel sheet, of size 125cmx125cmx25cm with all internal fittings of approved make complete.

S&F in repairs tubular curtain rails 20 mm dia anodised aluminium alloy complete with fixing brackets,stops,rollers etc

S&F in repairs anodised aluminium alloy brackets for curtain rails 20 mm dia complete.

S&F in repairs cast iron 75 mm dia (outlet) floor / nahani trap including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete.

S&F in repair white vitreous china suqatting pan ''Orissa'' pattern size 580 x 440mm white with ''P'' or ''S'' trap and integral foot rest including connection to traps and to flusing pipe, anti syphonage pipe etc and making good to floor complete.

S&F in repairs C.P grating of size 150 x 150 mm complete.

S&F in repairs PVC flushing cistern low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC bend 32mm complete.

S&F in repairs vitreous china wash basin white flat back type of size 550x400mm including cutting for and pinning in ends of brackets and 32mm dia chromium plated waste coupling and drain pipe complete.

S&F in repairs CP Centre hole Wash Basin mixer three in One 15 mm bore pipe complete.

S&F in repair CP wall mixer three in one system for mixing hot and cold wather screwed down for iron pipe 15 mm bore and fixed complete.

S&F in repairs 15 mm bore CP stop cock/Angle cook cast copper alloy, fency type screwed down high pressure with capston head screwed for iron pipe complete.

S&F in repair concealed stop cock fancy type with sheet flange cast copper alloy, scrwed down high pressure with round operating knob for 15 mm bore pipe bore and fixed complete.

S&F in repairs CP bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete.

S&F in repair 15mm bore shower rose with swivel joints brass chromium plated Each of 65mm size including 30cm long arms CP waste cup, washer etc complete.

S&F in repair PVC connection 15mm bore with PTMT nut of length 450mm complete.

S&F in repair superior quality CP brass tubular towel rail 20mm dia, D type, 60 cm long between flanges fixed complete.

S&F in repair of sheet glass self assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.

S&F in repairs Chromium plated soap dish heavy duty fixed with brass screw complete.

Complete removal of existing unserviceable roof treatment incl taiking down plaster, padding of any description and any position, cleaning, flushing out junctions of parapet wall washing down with water etc to prepare surface for new WPT including removing off rubbish at out side MD land complete.

M&L for 50mm average thick PCC padding in Cement concrete (1:2:4) type B0 (Using 12.5mm graded stone agg) mixed with liquid water proofing admixture as per manufacturer's instructions finished even and smooth without using extra cement for laying of WPT (Water Proofing Admixture shall be measured seperately) complete.

M&L cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30Ltr per Sqm followed by evenly a tack coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen, over it laid with APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3.0 kg per Sqm 3mm thick of unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete.

Supply only liquid water proofing admixture complete. Make-Pidilite or equivalent.

Demolition and breaking up drain pipe (salt glazed ware) set in cement mortar 150 mm dia pipe complete.

M&L salt glazed stone ware drain pipes laid in trenches and jointed as specified internal diameter of pipe 150 mm complete.

M&L concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation manholes etc and getting out in loose/soft soil complete.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in solft / loose soil complete.

Removing excavated material soil n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete.

M&L pre-cast cement concrete as in cover slabs for manholes PCC 1:2:4 type B-1 (20 mm graded aggregate) set in cement mortar 1:6.

Demolition and breaking up or down PVC /AC/CI /Cement rain pipe 75/110 mm dia fixed in any position complete.

M&L for PVC (SWR) pipes, 100 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches & fixed complete

M&L for PVC (SWR) pipes, 75 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches & fixed complete

M&L for PVC (SWR) bends with access door suitable for 100/75 mm mm bore pipe fixed complete.

Taking down carefully Copper / Aluminium point wiring (light, fan, socket or power) including fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity complete.

M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694 & color code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases, finising of slote by means of cement mortar to the existing disturbed surface of the wall & touching with the existing colour of wall with three coats and making good disturbed surface, sunk in pressed steel terminal boxes of required size not less than 3.0mm thick factory made and factory painted with top cover 3.0 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete.

One light/fan/bell point controlled by one switch 6 Amp one way

One 3 pin switch socket combination 6 amp on the independent board.

One 3 pin socket outlet on same board with other switches.

All as described as per item No 95 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

One light point controlled by two way switches

S&F switch piano flush type single pole, one way 6amp complete make: Anchor / SSK / Cona

S&F switch piano flush type single pole, TWO way 6amp complete, make: Anchor / SSK / Cona

S&F switch socket combination 5 pin 6 amp complete, make: Anchor / SSK / Cona

S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete.

S&F fan regulator electronic type 100Watt 20V-50Hz complete, Make: Anchor cat No 38660 or equivalent

S&F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 230 volts ISI marked complete.

S&F in replacement under repair 7W LED Bulb suitable for B22 holder, System Efficacy should be > 85 lm/ W. PF > 0.9, The Lamp Should have Cool Daylight Color temp of 6500K, lumen output >600 lm. Make: Philips/Wipro/Crompton

Taking down U/S FTL and S&F of 4' 18W LED Tube With Batten with system lumen output of 1800 lumens. System Efficacy should be > 115lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80.Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Surge Protecton of 3KV.All the Photometrical & Electrical parametrs must be supported by LM79-08 test report from NABL Accridiated LAB OR UL, R9 Value > 0. Lamp starting time is not more than 1 Sec. The LED tube light conforms to applicable IS. Make of LED From Philips/Crompton/ Wipro. Housing of Batten should be made from Single piece powder coated CRCA sheet steel. Similar to Crompton LDSL 18-CDL with Master TLED 18W 1800 Lumens. Make : CG/Phillips/Wipro.

S&F in replacement under repair MCB DB factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc complete. Make : Legrand/Schneider/L&T

SPN 12 way

SPN 8 way

S&F SPN 32 Amps 10 KA rupturing capacity complete. Make Legrand or its equivalent in Schnieder/ABB.

S&F MCB SP 5 to 30 Amp 240 Volts

M&L for in repairs sub main wiring in & including concealed conduit not less than 20mm dia bore & accessories using two single core 4 Sqmm FRLS PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including one run of 2.5 Sqmm earth wire, PVC insulated & unsheathed complete.

S&F in repair energy efficient 5 star rated ceiling fan 1200mm sweep, single phase 230/240 volts AC and connecting up to including provn of porcilain connector and flexible three core copper conductor of size 23/0.0076 from ceiling rose or connector to ceiling fan and testing complete. Make : Havells/ Orient / CG

S&F in replacement Exhaust fan 250 mm sweep 1250 RPM with minimum airflow/air delivery 720 Cmh, 06blades, light weight, rust proof body & blades, self opening louvers for protection from birds & rain water, IP-55, 230 Volt AC supply, rated power input not more that 45watt, connecting up including provison of cable from ceiling rose to fan. Make : Crompton Greaves, Model : BRISK AIR or equivalent in Havells/ Orient

S&F in replacement wall security light LED type complete with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete. CAT Part No.LSTO-25-CDL 25watt of Make CG or its equivalent in Phillips/Wipro.

Aditya Construction

motwani and associate

M/s. RAMESH NARHARI VALEKAR