REPAIR/MAINTENANCE OF INTERNAL WIRING, FANS AND CONNECTED WORKS AT TECH AREA UNDER GE (AF) JAMNAGAR NO 1

Amount

Note for items pertaining to point wiring :- (i) Quoted rates are deemed to include for all provisions under preambles 1 (a) to (q), 2 (a) to ( e) & 3 under Sub Section B on Sl Page Nos 437 & 438 of MES Schedule Part_II. (ii) Pressed steel terminal boxes for point wiring shall be suitable for modular fittings / other fittings as per site requirement and shall be deemed to be included in quoted rates for point wiring

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L Concealed point wiring for one light point or one fan point controlled by one switch with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC conduit. ( Note - Cost for Cutting chases for taking down old point wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 is deemed to be included in quoted rates)

M&L Concealed point wiring for one 3 pin socket outlet, 5 Amps, independent, with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC conduit. ( Note - Cost for Cutting chases for taking down old point wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 is deemed to be included in quoted rates)

M&L Concealed point wiring for one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC conduit. ( Note - Cost for Cutting chases for taking down old point wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 is deemed to be included in quoted rates)

M&L Concealed point wiring for one 3 pin socket outlet, 15 Amps, independent, with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 2.5 sq. mm size in and including PVC conduit. ( Note - Cost for Cutting chases for taking down old point wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 is deemed to be included in quoted rates)

M&L for Modular switch 1 way 6A, 1 module

M&L in repairs for Modular switch 1 way 6A, 1 module

M&L for Modular Fan step regulator, 120W - 2 module

M&L in repairs for Modular Fan step regulator, 120W - 2 module

M & L for Modular Socket, 6A - 2/3 pin combined 2 module.

M & L in repairs for Modular Socket, 6A - 2/3 pin combined 2 module.

M & L for Modular Socket 6A/16A - 2/3 pin combined 2 module.

M & L in repairs for Modular Socket 6A/16A - 2/3 pin combined 2 module.

M&L for Modular switch 1 way 16A, 1 module

M&L in repairs for Modular switch 1 way 16A, 1 module

Supply and fix modular white cover plate with frame 6 to 8 module

Supply and fix in repairs modular white cover plate with frame 6 to 8 module

Supply and fix modular white cover plate with frame 2 to 4 module

Supply and fix in repairs modular white cover plate with frame 2 to 4 module

Supply and fix Modular metal Flush box 1/2 to 4 module.

Supply and fix in repairs Modular metal Flush box 1/2 to 4 module.

Supply and fix Modular metal Flush box 6 to 8 module.

Supply and fix in repairs Modular metal Flush box 6 to 8 module.

M&L point wiring for one light point or one fan point controlled by one switch with cables ( Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC casing & caping and 3mm thick plastic laminated sheet cover for fixing switch / sockets/regulators etc complete.

M&L point wiring for One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables ( Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC casing & caping and 3mm thick plastic laminated sheet cover for fixing switch / sockets/regulators etc complete.

M&L point wiring for one light point controlled by two way switch with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC casing & caping and 3mm thick plastic laminated sheet cover for fixing switch / sockets etc complete.

M&L point wiring for One 5 Amps socket point controlled by switch on the same board with other switches with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC casing & caping and 3mm thick plastic laminated sheet cover for fixing switch / sockets etc complete.

M&L point wiring for One 5 Amps socket point on independent board with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC casing & caping and 3mm thick plastic laminated sheet cover for fixing switch / sockets etc complete.

M&L point wiring for one 15 Amps socket outlet on independent board with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 2.5 sq. mm size in and including PVC casing & caping and 3mm thick plastic laminated sheet cover for fixing switch / sockets etc complete.

S&F Switch piano, flush type single pole, one way 5 Amp including connection complete.

S&F in repairs Switch piano, flush type single pole, one way 5 Amp including connection complete.

S&F Switch piano, flush type single pole, two way 5 Amp including connection complete.

S&F in repairs Switch piano, flush type single pole, two way 5 Amp including connection complete.

S&F Switch socket combination 2 in 1, 6A flush type.

S&F in repairs Switch socket combination 2 in 1, 6A flush type.

S&F switch socket combination flush type 6/16 Amps, 5 in 1 multipurpose including connection complete.

S&F in repair switch socket combination flush type 6/16 Amps, 5 in 1 multipurpose including connection complete.

Supply & Fixing Socket outlet 3 pin, 6A, flush type.

Supply & Fixing in repairs Socket outlet 3 pin, 6A, flush type.

Supply & Fixing Socket outlet 3/5 pin, 16A, flush type.

Supply & Fixing in repairs Socket outlet 3/5 pin, 16A, flush type.

Supply & Fixing Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body.

Supply & Fixing in repair Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd.

S & F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd.

S&F Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings.

S&F in repair Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings.

S&F Bell push, flush type, 5 amp 240 volts AC.

S&F in repair Bell push, flush type, 5 amp 240 volts AC.

S&F Buzzer, Ding Dong AC. 230 volts, single pole complete including connection complete.

S&F in repair Buzzer, Ding Dong AC. 230 volts, single pole complete including connection complete.

Taking down unservicable main switch/DB/MCBs incl disconnecting from mains and making good the disturbed surfaces.

Supply and fixing in repairs sheet metal enclosure for fixing MCBs TPN with 200 Amps rated neutral busbar 415 Volts, 4 way, with double door fixed on flush to the wall including making hole in the wall and fixing the DB including cement work and plastering complete all as directed.

Supply & fixing in repairs Sheet metal enclosures for fixing MCBs Single pole and neutral 8 way, 240 volts with 200 Amps rated bus bar withe double door fixed on flush to the wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as directed.

Supply and fixing in repairs of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp,'C' Curve type,10 Ka & 240V.

Supply and fixing MCB triple pole and neutral , 'C' Curve type capacity 63 Amps,10 KA, & 415 V.

Supply and fixing in repairs MCB triple pole and neutral , 'C' Curve type capacity 63 Amps,10 KA, & 415 V.

Supply and fixing MCBs single pole and neutral, 'C' Curve type capacity 40 Amps ,10KA & 240 Volts.

Supply and fixing in repairs MCBs single pole and neutral, 'C' Curve type capacity 40 Amps ,10KA & 240 Volts.

Supply and Fixing MCB single pole, 'C' curve type capacity 6 to 32 Amps capacity.

Supply and Fixing in repairs MCB single pole, 'C' curve type capacity 6 to 32 Amps capacity.

S&F in replacement of LED Street Light fitting 30 Watt, system efficiency not less than 100 lumen / watt, IP 66 protection, IK 07 impact resistance, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & separate driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete. Make :-cat no. ENDURAPEARLSL30WLED757SASYTOPCMP of Havells OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

S&F energy efficient decorative ultra slim LED tube light fitting with built in LED & integral LED driver 22 watt, aluminium extruded channel (approximate length 1200 mm) housing & diffuser with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge. Make:- Havells Cat No LHEXBTP7IN1S022 or OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES

S&F in repairs energy efficient decorative ultra slim LED tube light fitting with built in LED & integral LED driver 22 watt, aluminium extruded channel (approximate length 1200 mm) housing & diffuser with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge. Make:- Havells Cat No LHEXBTP7IN1S022 or OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES

Supply and fix Energy efficient recessed mounted 36 watt LED luminaries (lumen efficiency not less than 120 Lumen / watt) suitable for 600 x 600 mm grid ceiling along with flat diffuser along with constant current electronic driver all as specified and directed by Engg-in-charge.Make:- Havells Cat No DROPDOWNFLAT2X2PLR36WLED857S equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES

Supply and fix in repair Energy efficient recessed mounted 36 watt LED luminaries (lumen efficiency not less than 120 Lumen / watt) suitable for 600 x 600 mm grid ceiling along with flat diffuser along with constant current electronic driver all as specified and directed by Engg-in-charge.Make:- Havells Cat No DROPDOWNFLAT2X2PLR36WLED857S equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES

S&F in repair LED Aviation obstruction light fitting die cast aluminium alloy housing, heat resistant, clear thick glass and accessories with LED chip & driver, fixed in position & connecting complete. Make Bajaj Cat No BGAV 302 LED or equivalent of make mention in Appx B

S&F in repair PVC insulated, 2 core 1.5 Sqmm round sheathed copper conductor(flexible) industrial cable fire retardant all as specified and directed.

Supply & laying XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 10 Sqmm 2 core laid in duct passing through pipe / duct or fixed on pole and connecting and testing etc including taking down the old one complete all as specified & directed.

Supply & laying XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 16 Sqmm 4 core laid in duct passing through pipe / duct or fixed on pole and connecting and testing etc including taking down the old one complete all as specified & directed.

S&F in replacement of LED Flood Light fitting 70 Watt, system efficiency not less than 100 lumen / watt, IP 66 protection, IK 07 impact resistance, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & separate driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete. Make :- cat no. JETAPROFL70WLED757LTG of Havells OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

S&F in replacement of LED Flood Light fitting 120 Watt, system efficiency not less than 100 lumen / watt, IP 66 protection, IK 07 impact resistance, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & separate driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete. Make :- cat no. JETAIRISFLS120WLED757SYMLTG of Havells OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES

S&F in replacement of LED Flood Light fitting 160 Watt, system efficiency not less than 100 lumen / watt, IP 66 protection, IK 07 impact resistance, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & separate driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete. Make :- cat no. JETAIRISFLS160WLED757PNBLTG of Havells equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

S&F in repairs LED of 8 watt recess mounted adjustable led downlights made of extruded aluminium housing and high power led as a light source with clear diffuser and separate electronic driver fixed in position & connecting complete all as specified and directed. Note:- Ceiling cutout: Ø 75 mm, height 55 mm for 8 W Make Havells Cat No SPARKLEPROADJDLR8W840MOD40DWHTNEEM or equivalent of make mention in Appx B

S&F in repairs LED of 10 watt a minimalistic & versatile lighting source that offers a wide range of application with different aperture for same lamp unit. the lamp is deep recessed into the fixture to provide a glare-free solution complete all as directed and specified. Note:- Ceiling cutout Ø 80 mm, height 85 mm attachment 10 W Make HavellsCat No SPIRITLAMPUNITDLR10WLED840MOD24D or equivalent of make mention in Appx B

S&F in repairs LED of 10 watt new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power leds as light source with IP -66 complete all as directed.. Note:- Rate quotted shall include GI pipe,'Medium Grade' 50mm dia of height upto 2 Mtr suitable for fixing post-top light. Make:- HavellsCat No RUBYMINIPT15WLED830PSYMTOPC or equivalent of make mention in Appx B

Taking down carefully ceiling fan / exhaust fan / pedestal fan / wall mounted fan by disconnecting electric connection for carrying out repairing such as rewinding, replacement of defective spare part, over hauling and painting etc as required and re-fixing in the same position after carry out the repairs works, and connecting complete all as directed by Engr-in-Charge. Note:- (i)Repairing such as rewinding, replacement of defective spare part, connecting wire,and painting etc will be measured & paid separately under subsequent items. (ii)The rate quotted under this item is deemed to include for greasing & replacement of Minor spares like pins,wire pieces etc. not covered under itemd here in after.

M & L for rewinding of ceiling fan of any make by dismantling the ceiling fan,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing and reassembling.Providing two core copper cable PVC insulated multistranded 0.5mm 30cm length for connection of fan from ceiling rose and testing of fan complete all as directed by the Engineer-in-Charge.Rewinding should be carried out for the following size of ceiling fan

(a) 1200mm sweep

(b) 1400 mm sweep

M & L for rewinding of exhaust fan/flame proof exahust fan motor of any make by dismantling the exhaust fan,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing ,applying cotton tape and reassembling complete.Providing twin core copper cable 0.5mm 30cm length for connection and testing of fan complete all as directed by the Engineer-in-Charge.Rewinding should be carried out for the following size of exhaust fan :-

(a) 450mm sweep

(b) 300mm sweep

(c ) 200mm sweep

M & L for rewinding of Pedestal fan motor of any make by dismantling the Pedestal fan,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing ,applying cotton tape and reassembling complete.Testing of fan should be carried out to entire satisfaction of Engr-in-charge. The size of pedestal fan for rewinding shall be as under

(a) 300 mm sweep.

(b) 450 mm sweep.

(c )600 mm sweep.

All as per item No 4 above but wall mounted fan / Air circulators of size 450 mm sweep.

All as per item No 4 above but wall mounted fan / Air circulators of size 600 mm sweep.

Supply and fix in repair ball bearing of any size suitable for ceiling fan 1200 mm / 1400 mm sweep complete.

Supply and fix in repair Gun metal bush of any size suitable for ceiling fan of 1200 mm / 1400 mm sweep complete.

Supply and fix in repair Gun metal bush of any size suitable for exhaust fan 300 / 450 mm sweep.

Supply and fix in repair capacitor 2.5 MFD AC 230 Volt 50 HZ, for ceiling fans.

Supply and fix in repair capacitor 4 MFD AC 230 Volt 50 HZ, of exhaust / bracket fan any size.

Supply and fix in repair bolt, nuts, washer and split pin for the down rod of ceiling fan.

Supply and connection in repair PVC insulated, PVC sheathed three core copper conductor cable multi stranded of size 0.5 Sqmm for connecting of fan from ceiling rose complete.

Material and labour for painting of ceiling fan including blades by scrapping of old paint ,filling of cavities formed, preparation / cleaning of surface, making surface smooth and spray painting with one coat of white synthetic enameled paint of superior quality and writing MES /SM No with appropriate size letters using black paint complete all as specified and directed by Engr-in- charge.

Material and labour for painting of exhaust fan including blades by scrapping of old paint ,filling of cavities formed,preparation / cleaning of surface, making surface smooth and spray painting with one coat of white synthetic enameled paint of superior quality and writing MES /SM No with appropriate size letters using black paint complete all as specified and directed by Engr-in- charge.

Replacemnet of frame including rubber bush and all accessories suitable for 300mm exhaust fan of any make complete.

Replacement of frame including rubber bush and all accessories suitable for 450mm exhaust fan of any make complete.

Replacement PVC canopy set(upper & lower) for ceiling fans of any sweep and make and fixing in position.

Replacement of blades of ceiling fan of any sweep & make complete.

Replacement of down rod of MS having 15mm dia and length 600mm all as specified and directed by Engineer in charge

Replacement of blades of exhaust fan 450/300 mm of any make complete.

SURESH ELECTRICALS

MADHAV ENTERPRISE

Hirachand Sunderji and co

M/s Jagdish Machinery Stores

M/S Rajendra Constructions

rajengineers

jitendra c joisar

Sukhi Electricals