DEPOSIT Civil Supplies Office Deposit work 2020 21 Modernization of Taluk Supplyoffice Punalur Work General Civil work

Amount

Detailed estimate

9.18.1:Providing and fixing Pre- laminated flat pressed 3 layer ( medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer ( fittings to be paid separately)18 mm thick

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

od28822/2019_2020/BL:Supplying and fixing Stainless steel Auto Closer

9.79.3:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.65 mm

9.92.2:Providing and fixing chromium plated brass handles with necessary screws etc. complete:100 mm

9.84:Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

od28823/2019_2020/BL:Providing and fixing partition arrangements with computer table using 18mm thick MDF one side decorative and other side balancing, Framing with second class teak wood, view panel with 5.5 mm thick clear float glass, Drawer, storage, key board tray etc (Size of cubicle 1.3x0.6x1.2m)

od28824/2019_2020/BL: Supply of Conference Table (wood) for 10 Persons, size 1200 x1200 mm

od28825/2019_2020/BL:Supply of office table made of pre laminated particle board with drawer unit and locking system, size 1400 x 600 x 750 mm

od28826/2019_2020/BL:Providing Executive high backchair

od28827/2019_2020/BL:Supplying of Rolling chair ( black colour, metal frame with mesh fabric back, cushioned seat with PV Upholstery , tilting mechanism, PP handle etc.) including all cost ,conveyance etc. complete.

od28828/2019_2020/BL:Supply and Installation of GREENGUARD Certified Visitor Chair with arms, the seat and back should be made up of 1.2 cm thick hot pressed plywood and upholstered with fabric and moulded polyurethane foam with PVC lipping all around. the back foam should be designed with contoured lumbar support for extra comfort. back size 49.0 cm. (w) x 47.0 cm. (h) seat size 49.0 cm. (w) x 44.0 cm.(d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 kg/m3 and hardness load 16 kgf for 25% compression. armrests: the armrest tops should be injection moulded from black polypropylene. they should be fitted to tubular armrest supports made of m.s. e.r.w. tube and black powder coated (40-60 microns ). the tubular armrest supports hold together the seat and back. tubular frame: the tubular frame should be cantilever type & made of m.s. e.r.w. tube and black powder coated.

od29841/2019_2020/BL:Supplying and fixing Air port Chair 3 Piece

od38273/2020_2021/BL:Supplying Godrej make open steel rack of size 0.90 m × 0.45m × 1.80m at site including all cost, conveyance, handling charges etc. Complete

od38274/2020_2021/BL:Supplying and fixing GODREJ INTERIO Slimline 2 - door Almirah with 5 shelves (Glossy Finish, Royal Ivory)

9.76:Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

9.81.1:Providing and fixing bright finished brass handles with screws etc. complete:125 mm

9.82:Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

50.9.11.2:Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge.

50.9.12.1:Providing and fixing Thomson Multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site Engineer-in-charge.

od29943/2019_2020/BL:Supplying and installation of best quality polymer vertical blinds with all fittings including cost and conveyance of materials ,labour charges etc. complete

Appendix - B - maintenance

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.6.1:Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

10.12:Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty, in steel doors, windows, ventilators and composite units.

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

od28831/2019_2020/BL:Engaging Plumber

od28833/2019_2020/BL:Engaging man coolie

13.26:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

MANI J, CONTRACTOR

P K ASOKAN

Bidder Name

MANI J, CONTRACTOR

P K ASOKAN

Achankunju