REPAIR/ REPLACEMENT OF FURNITURE AGAINST SURVEYED OF FURNITURE AT AFS KUMBHIRGRAM.

Amount

Supply only BED PLY TOP of dimensions overall size shall be 2050mm long, 900mm wide and 400mm high. All steel shall be of rectangular CR pipe of 18 Gauge.The head board shall be 800mm high and Foot board shall be 500mm high.The frame of head board and foot board shall be of 38mmx38mm rectangular CR pipe.18mmx18mm rectangular CR pipe shall be provided in the inner of head board frame/foot board frame as shown in drg.18mm thick both side decorative prelaminated particle MDF board of walnut shade with PVC edging shall be screwed to MS strip arc welded to 18mm thick rectangular CR pipe with standard workmanship both in head board/foot board..25mmx65mm rectangular CR pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg.One stiffener of size 25mmx25mm shall be welded between the two legs of headboard over 150mm from the ground level.The top of bed hard shall be of 12mm thick BWR ply of approved make fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed all as directed and specified. Note:- All metal /iron work shall be pre treated with epoxy powder coated oven baked with synthetic enamel black after doing two coats of metal primer. Rest all as per Drg No FD/E6/MAP/08.

Supply only Bin linen Multipurpose of dimensions overall size shall be of 1000mm long, 380mm wide and 760mm high. Bottom rest shall be made of 19mm thick pre-laminated particle board (one side) and shall be 900mm long and 280mm wide and 75mm high joined together in long and short sides. Multipurpose bin linen shall be placed over it. The bin shall be 1000mm long, 380mm wide and 385mm high. Back side shall be of 19mm thick pre-laminated particle board 1000mm long and 685mm high. Side shall be of 19mm thick pre-laminated particle board 380mm wide and 685mm high. Top and bottom shall be of 19mm thick pre-laminated particle board 1000mm long and 380mm wide. A vertical partition shall be provided at 400mm from inner face of left side which shall be of 19mm thick pre-laminated particle board. A shelf shall be provided on the right hand side of the bin. Bottom, sides, back and front of drawers shall be of 12mm thick pre-laminated particle board. The partition between the drawers shall be of 19mm thick pre-laminated particle board. Front shutter of cupboard shall be hinged with continuous piano type hing and shall be side hung. The shutter shall have eight vertical slots of 19mm width and 180mm high with gap of 19mm made in the center of shutter. The shutter shall be provided with 100mm long mild steel powder coated handle and ball spring catch as shown on drawing. 19mm thick pre-laminated particle board 543mm long and 40mm wide shall be provided as base support in the front under the drawers. Teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers. Teak wood bearers two numbers shall be of 20mmx20mm in section and fixed to drawers on the outer sides in such a way that it runs smoothly over the bearers fixed on the sides of the partitions of the bin. A handle shall be fixed in the center of the each drawer with 100mm long powder coated mild steel. All front edges of pre-laminated particle board shall be fixed with 4mm thick teak wood edging as shown on drawing and as directed by Engineer-in-charge. The shutter shall have 4mm thick teak wood edging all around its edges. All exposed surfaces of teak wood shall be given high gloss French polish with lacquer finish. On right hand side top of bin an asbestos sheet plain shall be 6mm thick and 230mm all as directed and specified. Rest all as per Drg No FD/E6/MAP/09.

Supply only Table Peg of dimension of overall size shall be 450mm long,300mm wide and 380mm high.Legs shall be of teak wood of section 30mmx50mm.The legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.Two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.Two bottom rails of size 20mmx40mm shall be fixed between the legs .A centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.Top of the table shall be of 18mm thick pre-laminated MDF board with 4mm teak wood edging all round the top of table all as per directed and specified. Note: All wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish. Rest all as per Drg No FD-384

Supply only Side Board Large of dimension overall size shall be 1500mm long, 450mm wide and 760mm high. All wood shall be first class hard wood teak .The bottom frame shall be of 18mm thick teak wood frame and shall be 125mm high from ground.All sides i.e-front shutters ,top,bottom sides and front sides of drawers shall be of 18mm thick prelaminated MDF board .Four drawers shall be provided in the right hand side of the side board . Left hand side shall have one hung shutters. Back of side board shall be of 12mm thick commercial ply irrespective of what is shown on drg.Bottom of drawers shall be of 6 mm thick plywood commercial. The shutters shall have continuous piano type hinges. The top of one shutter shall have 50mm long flush bolt fitted towards inside of shutter. Two knobs shall be provided to the shutter. Four knobs shall be provided to the four drawers (one for each drawer).3mmx19mm teak wood edging shall be provided to all edges of particle board and shelf all as directed and specified. Note :All wood and particle board surfaces exposed to view when placed in position shall be French polished with high gloss finish. Rest all as per Drg No FD-1112.

Supply only Sofa set 5 seater of dimension overall size of three seat piece shall be 1730mm long, 745mm wide and 530mm high up to arm rest level.Overall size of one piece shall be 670mm long and 745 mm wide and 530mm high up to arm restlevel. The sofa set to seat five shall consist of one large three seat piece and two small one seat pieces. All wood shall be of first class teak wood (MP) legs of sofa set shall be 70mm x35mm in section teak wood . Front legs shall be jointed by 100mm x 35mm in section wooden rail in front . Front and rear legs shall be joined with 100mm x 35mm in section wooden rails in sides. 100mm thick seat cushion and back cushions shall be of size 530mm x 560mm (three numbers in seat and three numbers in the back for the large seat). In one seat sofa chair the cushion shall be one in back and one in seat of size 530mm x 560mm. The cushion shall be of cool foam or any other superior quality foam of 32 density as approved by Engineer-in-charge.Cushion shall be covered with approved color tapestry cloth(approved by AGE(I)) or as directed by Engineer-in-charge. Note: All wood surface exposed to view when placed in position shall be French polished with lacquer finish rest. Rest all as per Drg No FD/MAP-II/02.

Supply only Table bed side of dimension overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in Drg No FD/E6/MAP/15 .The entire frame of table bed side shall be made up of 18mm MS square pipe (18 Gauge) duly black powder coated. The two sides and top shall be made up of 18mm thick prelamainted MDF board exterior grade. The Back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood BWR grade duly screwed to frame. The two sides, back and bottom of drawers of the table shall be made up of 12mm thick commercial plywood irrespective of what is shown on drg, except the front side which shall be of 18mm thick prelaminated MDF board exterior grade of walnut shade. The drawers shall be made functional on teak wood runners fixed inside the tables shown on drg.The drawers of the tables shall be provided with 100mm long CP handles all as per directed and specified. Note: All wooden surfaces shall be french polished with two coats after preparation of surfaces and steel portion shall be painted with synthetic enamel black paint.

Supply only Teapoy of dimension overall size shall be 600mm long, 450mm wide and 540mm high. The legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood.5mmx5mm in section groove shall be provided at the visible portion of top of legs. Top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs. A centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg.25mm thick and 25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws.Top of table shall be of 18 mm thick pre-laminated MDF board with 4mm teak wood edging al-round the top of table all as per directed and spefied. Note: All wood surfaces shall be French polished with high gloss finish. Rest all as per Drg No FD-382.

All as shown on Drwaing No FD/MAP-II/04. Overall size shall be 450mm long, 450mm wide and 950mm high. All wood shall be frist grade Kiln (plant) seasoned teak wood as per IS1331 1971 free from knots cracks shall be used. Front and rear leg shall be 35x50mm Teak wood. sheet shall be made of 75mm thick 40 denisity Foam with fabric as approved quality on seat of 12mm thick BWR pheneol bonded to the bottom of legs with 30mm long screw. all wood surfaces exposed to view when placed in position shall be melamine polish with high gloss finish.

Supply only Chair revolving with arms as aproved by AGE(I) Kumbhirgram.

Supply only Chair Visitor with Arms as aproved by AGE(I) Kumbhirgram.

Supply only Teapoy Varandah of dimension over size shall be 900mm long, 450mm wide and 400mm high. Legs shall be of 20 mm dia mild steel conduit of wall thickness 1.6 mm made in U-shape with bottom of legs in sides shall be 350mm apart. U-shaped legs shall be provided at 50mm from each end of long side. 25mmx3mm flat iron frame shall be welded on the top of conduit as shown on drawing lrrespeective of whether shown on drawing or not, the 20 mm dia wall thickness as 1.6mm, bottom stiffeners to short sides connected to legs in shorter sides shall be welded at 100mm high from bottom of legs. A long stiffener with 20mm dia and wall thickness 1.6mm shall be welded with short stiffeners joining shot stiffeners in the middle at 100mm high from bottom of legs. Top table shall be 19 mm thick prelaminated MDF board white colour shall be fixed as directed by Engineer-in-charge.Hard rubber/PVC toes shall be provided to the bottom of all legs all as specified and directed. Note: All steel surfaces exposed to view when placed in position shall be painted with two coats white paint over a coat of primer with spray machine after preparation of steel surfaces. Rest all as per Drg No FD/E6/MAP/17.

M/S KHAN ELECTRICAL (BID ID -3080663)

M/S ANITA ROY and SONS (BID ID -3083374)