REPAIRS TO CERTAIN BR ITEMS IN ELECTRICAL INSTALLATION UNDER THE AREA OF AGE B/R II AT GE WEST BAREILLY

Amount

Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and stair case similar work carefully and matching to adjoining disturbed surfaces all as directed.

Demolition of reinforced cement concrete in ground floors and paving n exc 15 cm thickness in ground floor.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and dismantling of floor hearth or wall (but not backing), tiling including cement mortar bedding layer of mortar 15mm thick for laying floor finish 1:4 for laying floor finishes all as specified and directed.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles anddemolition of concrete base n. exc 40mm thick and M&L for screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes all as specified and directed.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match dismantling of wall tile including complete all as specified or as directed. all as spfd or as directed.

M & L for 15-18 mm thick machine cut kota stone slab flooring and jointed with grey cement slurry fixed with pigment to match to shade of the slab including rubbing and mirror polishing over and and or 20 mm thick bedding layer of cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall kota stone slab including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L for Marble works 16 to 18mm thick Green marble machine cut and machine polished,and moulding, one side green marble, over/jambs of doors/ window cills, riser of steps and urinal partition wash basin platforms and flooring,skirting/dados like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble.

M&L 20mm thick Granite (of any type 0 tiles machine cut in skirting /dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.

M&L machine cut Kota stone slab 18 to 20mm thick in riser of steps skirting, dado and pillar,landing in single piece with round nosing with three numbers of serration, laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed dismantling of wall tile including cement mortar bedding complete all as spd and directed

Taking down chowkats with shutters not exc 1.5 Sq.m each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed.

Taking down chowkats with shutters exc 1.5 Sq.m each and not exc. 4.00 Sq.m including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F sliding/fix windows of aluminium alloy powder coated, window and frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter ) on tracks ( Three tracks with mosquito proofing) and glazzing with and including 5.00 mm thick tinted glass fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (IV) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (iv) Aluminium fittings such aluminium handle 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed. (vi) Aluminium gril for glass protector.

M&L providing "RAJSHRI" BRAND FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charge

M&L in providing 30 mm thick RAJSRI brand factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing

M & L for 35mm thick plain framed glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, without sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, of 2nd class hard wood , members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats all as specified and directed.

S&F factory made 32mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F for 100mm long stainless steel butt hinges.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminiumalloy and fixed.

S&F for 150mm long aluminum handles, fabricated type, plate type.

S&F 100mm Aluminium anodised,barrel tower bolts of extruded section and fixed. all as spd and directed

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) all as spd and directed

M&L brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cm (1:4) all as spd and directed

M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair or as specified or as directed.

M&L Cutting channels, grooves or rebates n.exc 15cm girth, and trimming surface.

M&L forming 12mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A'

M&L for hard core of stone not exc 63 mm guage spread, levelled in layers not exc 100mm watering and well ramming to true surfaces complete.

M & L 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M& L providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion including filling the joint with sand complete all as specified

M&L for PCC Kerb stone outer coloured surface machine pressed factory made of size 150mm long 100mm wide and 300mm deep in PCC 1:2:4 type B-0 using 12.5 mm grade stone aggregate, jointed in CM 1:4 complete all as specified and directed.

M&L for screed bed or bedding layer of cement mortar 15mm thick in CM (1:6) for laying floor finishes complete all as specified and directed

M& L for providing precast cement concrete rubber moulded chequered coloured tiles 20 to 25 mm thick even finished on top of approved design and pattern complete all as specified and directed

Taking down cement plaster from wall / ceiling of any description including terrazzo skirting/dado on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc.all as specified and directed.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:4) including finishing the surface even and smooth without using extra cement all as spd and directed

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:6) including finishing the surface even and smooth without using extra cement all as spd and directed

M & L for rendering 10 mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished the surface even and smooth without using extra cement complete all as spd and directed

M&L white washing three coats to wall surfaces including preparation of newly plastered untreated surfaces all as spd and directed

Complete removal of existing treatment from wall/ ceiling surfaces and rubbing down with sand paper to have even and smooth surfaces

M&L for applying 1 mm thick layer of birla wall care putty on wall/ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as spd and directed.

M & L applying two coat of distemper oil emulsion white or tinted on new decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified.

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M & L applying one coat of cement based paint on old decorated or undecorated wall, roof surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified.

M&L One coat of Apex paint on old plastered wall surfaces of any description including preparation of surface, complete all as specified.

M&L Two coat of Apex paint on new plastered wall surfaces after applying wall putty on any description including preparation of surfaces, complete all as specified.

S&F in repair vitreous china water closet (squatt pan) orissa pattern 580x 440 mm size pan white with front or back inlet with integral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe complete all as specified and directed.

S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair stop anglived e 15mm dia, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed all as specified or as directed. .

S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified or as directed.

S&F for 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors complete all as specified or as directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified or as directed.

S&F for 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors complete all as specified or as directed.

S&F fancy Bib tap 15mm dia long body cast copper alloy chromium plated with crutch or buter fly handle screwed down (Pressed for iron pipe) fixed in repairs

S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

Taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc.

S & F PVC (SWR) 110 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall all as specified or as directed.

S & F PVC soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified

M & L 75 mm dia cost Iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) as in repairs

S & F PVC (SWR) bend 110mm all as specified or as directed.

S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 all as spd and directed

M&L Preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint.

M & L preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint

M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface all as spd and directed

M&L painting to wood and wood based surfaces of any description exc 10cm with or girth with two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated surface all as spd and directed

S&F in repair galvanised mild steel wire cloth 0.48mm nominal dia of wire and average width of aperture 1.18 mm all as spd and directed

Demolition of cement concrete(unrinforced), in any position and paving n.exc. 15 cm thickness( below or above ground level) including tile/ terrazzo floor complete all as specified and directed.

M&L 25mm thick cement concrete type B1 1:2:4 using 20mm graded stone aggregate in floor finishes even and fair to receive floor tiles.

M&L for 15mm thick screeding on fair faces of concrete surfaces in CM 1:4 with water proofing compound @ 200ml per 50 Kg of cement complete all as specified and directed.(NOTE:- WPC shall be measured and paid separatly), finished even and smooth with steel trowel without using extra cement.

Supply only liquid water proofing compound (Make :Dr fixit)

Supply and providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen,MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and directed and described as under :-

(a) Prepartion of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacture'"s specification complete all as specified and directed.

(b) Supply & providing water proofing treatment with polymeric proofing membrane of 3 Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100 micron HMHDPE film centre core including coating he surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified or as directed.

M&L Aluminium paint one coat on APP membrane complete all as specified and directed.

Dismantling water tanks and removing to store capacity exc 250 and not exc. 500 litres complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as directed.

S&F vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe, waste fittings etc.

S & F in repair chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete all as specified or as directed.

S & F 150 mm size, MS ordinary rat tail rod pattern springs including roller and roller plate complete including fixed to wooden and steel chowkats.

S&F in repairs tubular, towel rail brass chromium plated 20mm dia D type 60 cm long between flanges all as spd and directed

S/F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls.

S&F in repairs 20 mm dia SS fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

Dismantling mild steel work including doors, gates but excluding framed truss etc.

S&F inrepair Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, complete.

M&L framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard brs; barred iron doors; ladders; framed balusters; walk ways; railing ;angle iron for post framework of watertanks and similar work conforming to Fe-290. Gde E-165

S&F Mild steel in flat , round or square bars, in available length

S&F in repair Steel rolling shutters with 1mm laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete : push pull or manual type

Repair to overhauling of rolling shutter incl replacing unserviceable springs.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, embedded with concrete etc complete all as specified.

Supply only chain link MS galvanised fencing any size or type complete all as spd and directed.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolt, etc including provision of binding wire complete all as spd and directed.

Excavation in Post holes (or similar holes ) in any type of soil, each not exe 0.5 cum , getting out , returning filling and ramming carts not exc 25cm , watering and removing surplus soil to a distance not exc 50 mtr and making good surface complete

Dismantling of fencing of any type..

M & L for writing an existing sign board with synthetic enamel paint including preparation of old surfaces of any description over 10 cm in width or girth.

M&L for removing tree, plants & vegetarian grouts for wall & roof etc, complete incl making good surface in cm 1:3.

Dismantling of extra plaster as narrow width as in edges of roofs, fasia, chhajja etc & plaster 15mm with C:M 1:3 mixed with Dir fixit URP as per Manufactures test complete all as specified and directed. Note: water proofing compond measure seprately

S&f M.S chequred Plates channel , square cut or notched (Ordinary and counter sunk ) fe 410-w(gde -E-250) quallity A forming holes, without any attachment.

Notes :

JAI SRI RAM ASSOCIATE

multiple alliance enterprises

Goel Enterprises

REHAN CONSTRUCTION

SHRI BALA JI STORE

R K CONSTRUCTION

M/S Shree Sai Builders

Shikhar ji Enterprises