Execution of the work of Reorganisation of UWSS Suket with 03 year Operation and Maintenance, District Kota

Amount

INTAKE PUMPING STATION: CIVIL WORK

Construction of submerged intake pumping station, having floor area around 50 Sqm, in the reservoir for lifting of Raw water from desired pumping level to inlet Chamber of WTP. The Intake Pumping Station shall be constructed by casting of pile pillars and RCC framed structure over piles for Intake Oump House as per approved design & drawing. The work also included construction of pile pillars for supporting of approach bridge from bank of Dam to Intake PH.

Construction of RCC supporting pillars with under water piles for supporting 3.0mtr wide approach bridge

Construction of 3.0M wide and about 30meter length approach bridge made of steel structure from bank of Dam to Intake PH

Other items & accessories not specified above but required to complete the work on turn key basis

PUMPING MACHINARY

Providing, installation, testing, trial run and commissioning of the following, as per site condition & specifications given

2 nos. Vertical turbine pump with column pipes and other accessories (capacity 76.25 LPS/ 50M mtr head , 2 X 60KW)

Providing, installation, testing and commissioning of LT MCC with panels housing motor starters relays, MCB/MCCBs, bus-bar for all pump sets including all internal cabling and cable/bus-bar from switchyard, up to panels, etc, complete in all respect as per the scope of work & specifications .

Providing, installation, testing and commissioning of capacitor control panels, housing power factor control system panel/capacitors (APFC Panel), other accessaries including all internal cabling and cable/bus-bar from switchyard, up to panels, etc, complete in all respect as per the scope of work & specifications.

Providing, installation, testing and commissioning of Variable Frequency Drives, for each pump-set, complete in all respect as per the scope of work & specifications.

Providing, installation, testing and commissioning of soft starters, for each pump-set, complete in all respect as per the scope of work & specifications.

Earthing system complete for LT equipments

P & F IP-54 protected street light luminaire on existing bracket LED street light fixture 30-40 watt

MS Delivery Pipes piping (manifold) with all fittings such as flanges; bends; tees; and other specials; nut & bolts; gasket etc., for both pump

MS Pipe size 250mm

Resilint Seated Manually operated Sluice Valves on individual discharge piping; 250mm , PN-1.0

Bellows type dismantling joints on individual & commondischarge piping ; 250mm PN 1.0

Manually operated Butterfly Valves on individual discharge piping of each pump ; 250mm PN-1.0

Dual Plate type Check valve on individual discharge piping of each pump ; 250mm, PN-1.0

Kinetic Air Valves of 80 mm diameter with isolating Sluice Valve, PN-1.6

Glycerine filled pressure gauge with all fittings

Electric hoist 2 ton capacity with girder & other accessories.

Full Bore Electro magnetic Flow meter with suitable size by pass arrangement and associated pipes and specials etc, as per scope of work for following headworks 200mm Size

Bellows type dismantling joints on flow meter arrangement : 200mm, PN-1.0

Manually operated Sluice Valves for flow meter arrangement : 200mm, PN-1.0

Manually operated Butterfly Valves on flow meter arrangement : 2000mm, PN-1.0

Other items & accessories not specified above but required to complete the work on turn key basis

RAW WATER RISING MAIN

Supply, Laying; jointing; sectional testing; and commissioning of DI (class K7) / MS pipeline including the earthwork, bedding, sand bedding, construction of anchors; thrust blocks; cross walls; traverse block; pipe support structures; road crossing works; river crossing works; providing pitching & NP 3 pipes for scour valves; construction of ancillary structures; providing & installation of specials; clearing the site; disinfection etc. complete in all respect as per the specification

300 MM DI K-7

300 MM MS Pipe

Installation of 250mm Bulk Flow Meter at Inlet of WTP with by pass arrangement compising of following items of 300 mm Size at Inlet of WTP

Full Bore Electromegnatic Flow Meter 250 mm

Sluice Valves PN 1.0 300mm

Bellows Type Dismantling Joint 300mm

Supply & installation of Air Valves size 80 mm, PN-10.

Construction of air valve chambers or Air valve pillars as per site condition

Supply & installation of Sluice Valves for scouring size 150 mm dia

Construction of scour valve chambers

Construction of Water Meter Chamber as per design & drawing near WTP Inlet Chamber

Provision for MS Specials/ fittings in water meter chamber

Provision for surge protection devices on the rising mains

Other items & accessories not specified above but required to complete the work on turn key basis

Provision for National Highway crossing by Trench Less Technology

Fabrication, supply of flanged/ plain ended MS pipe made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer

WATER TREATMENT PLANT

Design, construction, execution, testing, commissioning & trial run of 4.4 MLD ( input capacity with maximum 3% losses). Treatment Plant including all relevant civil, electrical and mechanical works, Stores, office along with ancillary civil works as per specifications and control system

Inlet and Distribution System : Inlet chamber, Measuring channel, flash mixers, main channel to filter complex, by pass, walkways, stairs, railings

Equipment

Civil Works

Clariflocculators : Pipes between flash mixers and clariflocculators, clariflocculators, walkways, stairs, railings, clarified water channel to the main channel

Equipment

Civil Works

Filters and Filter House : Filters, all distribution channel, pipe gallery with clear water channel and sump, control gallery, observation platforms, walkways, stairs, railings, back wash water tank, clear water measuring channel, post chlorination tank & clear water channel up to CWR's.

Equipment

Civil Works

Administrative & Control Building : Administrative Control Building, backwash pumps, blowers, motor control centre, laboratory equipment, water cooler, furniture etc.

Equipment

Civil Works

Chemical House : Chemical house, alum & lime dosing equipment, piping to the injection point and injection devices

Equipment

Civil Works

Chlorine Building, Chlorination & Chlorine Storage : Chlorine storage area, chlorine building, chlorine tonners, chlorination equipments, injection devices.

Equipment

Civil Works

Recycling system : Recycle tank with all equipments, motor etc.

Equipment

Civil Works

Raw water balancing tank

Equipment

Civil Works

Outdoor Piping

Equipment

Civil Works

Laboratory Equipments

Laboratory equipments as per clause 2.3.6.2 of Vol-II of Tender Document.

Furniture as per clause 2.3.6.3 of Vol-II of Tender Document

Ancillary Civil Works as per scope of work

Portable pH meter, Chlorine Sensor and turbidity meters, portable flow meter, one each in addition to laboratory equipments

Providing and installation of LT control panels, exhaust fans, cables, cable ducting, earthing, Lighting fixtures, lighting panels, sockets, receptacles, fans, etc. for all pumps of WTP complete in all respect in the outdoor areas of different Treatment plant units, the administration and control building, and other utility areas.

Other items & accessories not specified above but required to complete the work on turn key basis

CLEAR WATER RESERVOIRS

Construction of Clear Water reservoir , as per specifications including fixing inlet; outlet; washout & overflow pipes, installation of valves on inlet; outlet; washout pipes, puddel collars, duck foot bends, pipe interconnecting the incoming & out going mains with all specials; float valve, water indicator, plinth protection works, finishing, testing and commissioning complete as per the specifications

At WTP - 500 KL

Other items and accessories not specified above but required to complete the work on turnkey basis.

CLEAR WATER PUMP HOUSE AT WTP

Civil work such as construction of pump House.

At WTP Head Works (For Installation of 2W+2S Pumps & 2 pumps for future). Pump house shall be constructed over RCC CWR. Area of pump house 90 Sqm

Providing, installation, testing, trial run and commissioning of the following, as per specifications

Centrifugal horizontal split casing pumps & motor all other accessories of following duty conditions

Pumps for Existing 450 KL & 150 KL ESR: 22.76 LPS/ 45M/ 20 KW

Pumps for Proposed 1200 KL & Existing 150 KL ESR: 51.21 LPS/ 55M/ 50KW

MS Header pipe with all fittings such as flanges, bens, end plug etc. Size 450mm

MS suction pipes with all fittings such as flanges; bends; tees; and other specials; nut & bolts; gasket etc.

Existing ESR Route- 200 mm

Proposed ESR route- 300 mm

MS suction pipes with all fittings such as flanges; bends; tees; and other specials; nut & bolts; gasket etc.

Existing ESR Route- 200 mm

Proposed ESR route- 300 mm

MS discharge pipes with all fittings such as flanges; bends; tees; and other specials; nut & bolts; gasket etc.

Existing ESR Route- 150 mm

Proposed ESR route- 250 mm

MS common Delivery Pipes (manifold) with all fittings such as flanges; bends; tees; and other specials; nut & bolts; gasket etc.

Existing ESR Route- 150 mm

Proposed ESR route- 250 mm

Resilint Seated Mannually operated Sluice Valves of on suction & common header piping of following sizes, PN-1.0 on suction pipe

Bellows type dismantling joints on suction & common header piping of following sizes on suction pipe

Resilint Seated Mannually operated Sluice Valves of on suction & common header piping of following sizes, PN-1.0 on discharge pipe

Bellows type dismantling joints of following sizes on individual & common delivery piping of following sizes

Manually operated Butterfly Valves on individual delivery piping of following sizes PN-1.0 on discharge pipe

Dual Plate type Check valve of following sizes on individual delivery piping of following sizes

Kinetic Air Valves of 80 mm diameter with isolating Sluice Valve of 80 mm size

Electrical hoist of 2 ton capacity or as per design with all accessories at Chhapi head works

Glycerine filled pressure gauges

Providing, installation, testing, trial run and commissioning of the following, as per the specifications

Providing, installation, testing and commissioning of LT MCC with panels housing motor starters relays, MCB/MCCBs, bus-bar for all pump sets including all internal cabling and cable/bus-bar from switchyard, up to panels, etc, complete in all respect as per the scope of work & specifications .

At WTP Head Works

Providing, installation, testing and commissioning of capacitor control panels, housing power factor control system panel/capacitors (APFC Panel), other accessaries including all internal cabling and cable/bus-bar from switchyard, up to panels, etc, complete in all respect as per the scope of work & specifications.

At WTP Head Works

Providing, installation, testing and commissioning of soft starters, for each pump-set, complete in all respect as per the scope of work & specifications.

At WTP Head Works

Earthing system complete for LT equipments

At WTP Head Works

Exhaust Fans, of pump house and other ventilating arrangements like roof entrance etc

At WTP Head Works

P & F IP-54 protected street light luminaire on existing bracket LED street light fixture 30-40 watt

Providing, installation, testing, trial run and commissioning of the following, as per specifications

Full Bore Electro magnetic Flow meter with suitable size by pass arrangement and associated pipes and specials etc, as per scope of work for following headworks

Manually operated Sluice Valves for flow meter arrangement : PN-1.0

Bellows type dismantling joints on flow meter arrangement :

Manually operated Butterfly Valves on flow meter arrangement : PN 1.0

Construction of Flow meter chamber of Size 1.8x2.4x2.0m

Fabrication, supply of flanged/ plain ended MS pipe made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer

Other items and accessories not specified above but required to complete the work on turnkey basis.

CLEAR WATER RISING MAIN

Supply, Laying; jointing; sectional testing; and commissioning of DI (class K-9/ K-7) pipeline including the earthwork, bedding, sand bedding, construction of anchors; thrust blocks; cross walls; traverse block; pipe support structures; road crossing works; river crossing works; providing pitching & NP 3 pipes for scour valves; construction of ancillary structures; providing & installation of specials; clearing the site; disinfection etc. complete in all respect as per the specification

DI K-7 Pipe Line

100mm Dia

150mm Dia

200mm Dia

250mm Dia

Supply, Laying; jointing; sectional testing; and commissioning of MS pipeline including the earthwork, bedding, sand bedding, construction of anchors; thrust blocks; cross walls; traverse block; pipe support structures; road crossing works; river crossing works; providing pitching & NP 3 pipes for scour valves; construction of ancillary structures; providing & installation of specials; clearing the site; disinfection etc. complete in all respect as per the specification

100mm Dia

Supply & installation of Air Valves size

Construction of air valve Chambers

Construction of sluice valve chamber at Junction points

Construction of Water Meter Chamber as per design & drawing

Provision for CI Specials/ fittings in Sluice Valve Chambers/ offtake chambers, water meter chamber & section valve chamber

CI Fittings

Sluice Valves PN-1.0

100mm Dia

150mm Dia

250mm Dia

Bellows Type Dismantling joint

100mm Dia

150mm Dia

250mm Dia

Full Bore Turbine Type Bulk flow Meter

100 mm dia

150 mm dia

250 mm dia

Provision for National Highway crossing by Trench Less Technology

Fabrication, supply of flanged/ plain ended MS pipe made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer

DISTRIBUTION MAIN

Supply, Laying; jointing; sectional testing; and commissioning of DI (class K-7) pipeline including the earthwork, bedding, sand bedding, construction of anchors; thrust blocks; cross walls; traverse block; pipe support structures; road crossing works; river crossing works; providing pitching & NP 3 pipes for scour valves; construction of ancillary structures; providing & installation of specials; clearing the site; disinfection etc. complete in all respect as per the specification

DI K-7 Pipe Line

100mm Dia

150mm Dia

200 mm Dia

250 mm Dia

300 mm Dia

400 mm Dia

Supply, installation, testing & comissioning of manually operated Resilient Seated D/F sluice Valves of PN 1.0 rating on distribution pipe line with same size CI dismantling Joint

100mm Dia

150mm Dia

200mm Dia

250mm Dia

300 mm Dia

400 mm Dia

Interconnection of existing pipe line with new pipe line including required earth work/ road cutting, supply & fixng of required specials, complete as per scope & specification of work

80 mm dia

100 mm dia

125mm dia

150mm dia

200 mmdia

250mm Dia

300 mm Dia

400 mm Dia

Fabrication, supply of flanged/ plain ended MS pipe made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer

Provision for National Highway crossing by Trench Less Technology

Other items and accessories not specified above but required to complete the work on turnkey basis.

ELEVATED SERVICE RESERVOIRS

Construction of Over Head Service Reservoirs, as per specifications including supply, fixing inlet; outlet; washout & overflow pipes, supply & installation of valves on inlet; outlet; washout & overflow pipes, puddel collars, duck foot bends, pipe interconnecting the incoming & out going mains with all specials; float valve, water indicator, plinth protection works, finishing, testing and commissioning complete as per the specifications at:

Other items and accessories not specified above but required to complete the work on turnkey basis.

CIVIL WORK

To Plan, Design, Construct and finish the following as per specifications as per detail given in Annexures.

Construction of JEN residence Building

Construction of Boundary wall, around Head work at WTP and at ESR sites

Installation of MS Gates at Head Works & ESR sites

Construction of RCC approach road at WTP head work site

Provision for demolishing of abundant structures at PHED campus and repairing of usable structure

Other items and accessories not specified above but required to complete the work on turnkey basis.

Supply of Mechanical & Electrical & instrumentation spare parts as per clause 2.4.4.1 of Vol-II of Tender Document.

Supply of pipe line spare parts as per clause 2.4.4.2 of Vol-II of Tender Document.

Supply of tools & tackles as per clause 2.4.4.3 of Vol-II of Tender Document.

PRICE BREAK UP SCHEDULE: B

For 03 Year O & M

Cost for Basic Service Charges, including all chemicals required, to treat water at WTP, Administration and Management, Running of Office, Staff Quarters, Work Shops, Garage, Comprehensive Operation, Maintenance and Repairs including Preventive Maintenance, Cost of Lubricants, Consumables, Spare Parts as per Scope of Work & terms & conditions of contract. After execution of the project and issuance of completion certificate as per relevant clause in Vol-1, Defect Liability Period shall be of 12 months. During Defect liability period O&M shall be done by contractor for which no payment shall be made separately. O&M period shall commence after expiry of defect liability period.

For Year 1 of O&M

O&M Charges

Chemical Charges

For Year 2 of O&M

O&M Charges

Chemical Charges

For Year 3 of O&M

O&M Charges

Chemical Charges

Bidder Name

Amount

VISHNU PRAKASH R PUNGLIA LTD

DARA ENGINEERING AND INFRASTRUCTURES PVT LTD

DARA ENGINEERING AND INFRASTRUCTURES PVT LTD

DARA ENGINEERING AND INFRASTRUCTURES PVT LTD