REPAIR AND MAINT OF LT PANELS, SWITCH GEAR AND ALL TYPES OF SWITCH GEAR EARTHING POLE, PAINTING OF POLES AND REPAIR TO LT OVERHEAD AND LT UG CABLES ETC AT ZONE A AND B AT BARRACKPORE UNDER GE BARRACKPORE

Amount

Boaring holes horizontally under road without damaging the surface of road(minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of dia not exceeding 100 mm dia for passing of UG cable all as specified and as directed.

Taking down old unserviceable ACSR conductor from existing poles of any type including MS clamps porcelain insulators, cross arms, nuts, bolts and washer at any height complete all as specified and directed.

Supply and laying of XLPE insulated, PVC outer sheathed, LT armoured electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 95 sqmm, 3.5 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed. (NOTE: Excavation/earth work, sand cushioning, cable cover/brick shall be measured and paid separately if required)

Supply and laying of XLPE insulated, PVC outer sheathed, LT armoured electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 70 sqmm, 3.5 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed. (NOTE: Excavation/earth work, sand cushioning, cable cover/brick shall be measured and paid separately if required)

Supply and laying of XLPE insulated, PVC outer sheathed, LT armoured electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 25 sqmm, 4 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed. (NOTE: Excavation/earth work, sand cushioning, cable cover/brick shall be measured and paid separately if required)

Supply and laying of XLPE insulated, PVC outer sheathed, LT armoured electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 16 sqmm, 4 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed. (NOTE: Excavation/earth work, sand cushioning, cable cover/brick shall be measured and paid separately if required)

Supply and laying of XLPE insulated, PVC outer sheathed, LT armoured electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 10 sqmm, 2 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands, nuts, bolts and washers etc and testing cable complete all as specified and directed. (NOTE: Excavation/earth work, sand cushioning, cable cover/brick shall be measured and paid separately if required)

Supply and laying of XLPE insulated, PVC outer sheathed, LT armoured electric cable with aluminium stranded conductor 1100 volts grade, cross-sectional area 6 sqmm, 2 core laid in trenches/pipes/ducts/wall/borings with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed. (NOTE: Excavation/earth work, sand cushioning, cable cover/brick shall be measured and paid separately if required)

M&L for steel tubular pole painting of 9/11 mtr length & scrapping existing pole painting by using wire brush and using with emery paper and cleaning with chemical agents after cleaning of steel tubular pole and GI brackets and cross arms etc and applying two coats of aluminium paint over a coat of red oxide primer. Upto 1.5 mtr from bottom painting works shall be carried out layer by layer of 30 cm with yellow and black synthetic enamel paint and 15cm wide circle around the pole to be made by blue paint after black paint. Painting work shall be carried out at any height including marking of pole numbers marked with black paint over 20 cm yellow paint circle with all necessary safety equipments & tools complete all as specified and directed.

M&L for LT panel painting of size upto 1.6m x 1.2m x 0.6m and removing existing colour code as match to satisfaction of Engr-in-Charge and painting work carryout at any height, including safety equipments and tools of contractor's own arrangement complete all as specified and directed.

S&F of LED security light fitting of capacity 90 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector with inbuilt driver circuit and LED efficacy 120 lumen/W and cable connection from looping box to light fitting and testing and including taking down of old unserviceable light fittings complete all as specified and directed. (Make:- Bajaj Cat No. ENXTP108L WH CRTG SD90W/Havells Cat No. ENDURSUNDOWN SL90WLED 765 PASYBOTG/ SURYA Cat No. SLE UL 90W IP66 LXN or equivalent model/cat No. of make as per Appendix 'A' as mentioned in PS here-in- after)

Supply Install Testing and Commissioning of solar LED street light system comprised of LED street light 60W with 125 LM/W complete with 125 WP mono crystaline solar panel battery 54AH 12.8V LiFe P 04, MPPT solar charger controller capacity 12V 5 Amp inbuilt BMS technology material housing aluminium extruded, CCT-5700K, IP65 2 days battery backup, MNRE approved including all accessories with 50mm dia GI pole of 3 mtr height with base plate 4mm thick and connected work like excavation, returning filling and removal of soil, PCC (1:2:4) type B1 for fixing arrangement and electric connection complete all as specified and directed. (Make : HAVELLS CAT NO. SOLAR AIO 60W/ SURYA CAT NO. SSLE SISH 60W DL 125WP 54AHLFPW5/ PHILIPS CAT NO. BRPIII LED 120/757)

M&L for brick covering with width equal to length of brick as protection to cable with well burnt sub class ‘B’ bricks of size 250mm x 125mm x 75mm laid dry flat complete all as specified and directed.

M&L for sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep including required watering and consolidation after laying and stretching the cable complete all as specified and directed. (Note: Only punned down volume of sand to be measured)

Excavation in trenches for laying under ground cable, foundation and erection of poles and stays in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed.

Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm soil all as specified and directed.

Removing surplus excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting points as in soft/loose soil all as specified and directed.

Supply, installation, testing and commissinoning LT Feeder Panel of size 1300 x 1300 x 450 mm, Base Dimension made up with MS Iron Angle 40 x 40 x 5mm frame, 3 phase, 4 wire, 415 volts, AC, 50Hz, outdoor cubical type, sloping canopy top roof, floor mounted, free standing, dust and vermin proof, air ventilation with IP-54 made out of 3.15 mm thick CRCA sheet duly epoxy powder coated with seven tank process and CPRI approved Panel shall have front and rear opening,locking arrangement, cable alleys, bus bar chamber and switch gear compartment ,hinged double door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate,aluminium bus bar of size 400 Amp (60 x 5 mm RYBN) with Epoxy insulators and duly covered with heat shrink sleeves colour coaded , housed in a separate bus bar chamber,see through glass and control wiring with copper conductor cables of adequate size and length,incoming and outgoing MCCBs shall have extended bus bar links and civil work/PCC foundation (PCC 1:2:4 type B1) as per site requirement and including taking down old unserviceable panel from existing location after disconnecting of existing cables complete all as specified and directed including comprising of following:- (a) MCCB 250 Amps,FP, 25KA,415 volts,50Hz- 01 No (b) MCCB 100 Amps,FP, 16KA,415 volts,50Hz- 01 No (c) MCCB 63Amps,FP,16KA,415 volts,50Hz- 04 Nos (d) MCB TPN 40Amps,FP,'C' curve,415 volts,50Hz- 03 Nos (e) Digital voltmeter,with VSS -01 set (f) Digital, Ammeter,with CTs & ASS-01 set (g) LED phase indication lamps RYB-01 set (h) Aluminium bus bar TPN 400 Amps (04 Nos) rating -01 set (Note:- The contractor shall be submit the drawings (General& circuit lay out drawings ) for approval by the Accepting Officer/Engineer -in-charge before procurement)

Supply, installation, testing and commissinoning LT Feeder Panel of size 1300 x 1300 x 500 mm, Base Dimension made up with MS Iron Angle 40 x 40 x 5mm frame, 3 phase, 4 wire, 415 volts, AC, 50Hz, outdoor cubical type, sloping canopy top roof, floor mounted, free standing, dust and vermin proof, air ventilation with IP-54 made out of 3.15 mm thick CRCA sheet duly epoxy powder coated with seven tank process and CPRI approved Panel shall have front and rear opening,locking arrangement, cable alleys, bus bar chamber and switch gear compartment ,hinged double door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate,aluminium bus bar of size 250 Amp (60 x 5 mm RYBN) with Epoxy insulators and duly covered with heat shrink sleeves colour coaded , housed in a separate bus bar chamber,see through glass and control wiring with copper conductor cables of adequate size and length,incoming and outgoing MCCBs shall have extended bus bar links and civil work/PCC foundation (PCC 1:2:4 type B1) as per site requirement and including taking down old unserviceable panel from existing location after disconnecting of existing cables complete all as specified and directed including comprising of following:- (a) MCCB 200 Amps,FP, 25KA,415 volts,50Hz- 01 No (b) MCCB 100 Amps,FP, 16KA,415 volts,50Hz- 02 No (c) MCCB 63Amps,FP,16KA,415 volts,50Hz- 03 Nos (d) MCB TPN 40Amps,FP,'C' curve,415 volts,50Hz- 04 Nos (e) Astronomical time switch(Daily time switch) with suitable power contactor 63 Amps ML-2type, 3 Phase, 415 volts, Auto/Manual operating switches - 01 No (f) Digital voltmeter,with VSS -01 set (g) Digital, Ammeter,with CTs & ASS-01 set (h) LED phase indication lamps RYB-01 set (j) Aluminium bus bar TPN 250 Amps (04 Nos) rating -01 set (Note:- The contractor shall be submit the drawings (General& circuit lay out drawings ) for approval by the Accepting Officer/Engineer -in-charge before procurement)

Supply, installation, testing and commissinoning LT Feeder Panel of size 1300 x 1300 x 500 mm, Base Dimension made up with MS Iron Angle 40 x 40 x 5mm frame, 3 phase, 4 wire, 415 volts, AC, 50Hz, outdoor cubical type, sloping canopy top roof, floor mounted, free standing, dust and vermin proof, air ventilation with IP-54 made out of 3.15 mm thick CRCA sheet duly epoxy powder coated with seven tank process and CPRI approved Panel shall have front and rear opening,locking arrangement, cable alleys, bus bar chamber and switch gear compartment ,hinged double door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate,aluminium bus bar of size 400 Amp (60 x 5 mm RYBN) with Epoxy insulators and duly covered with heat shrink sleeves colour coaded , housed in a separate bus bar chamber,see through glass and control wiring with copper conductor cables of adequate size and length,incoming and outgoing MCCBs shall have extended bus bar links and civil work/PCC foundation (PCC 1:2:4 type B1) as per site requirement and including taking down old unserviceable panel from existing location after disconnecting of existing cables complete all as specified and directed including comprising of following:- (a) MCCB 250 Amps,FP, 25KA,415 volts,50Hz- 01 No (b) MCCB 200 Amps,FP, 16KA,415 volts,50Hz- 01 No (c) MCCB 63Amps,FP,16KA,415 volts,50Hz- 03 Nos (d) MCB TPN 40Amps,FP,'C' curve,415 volts,50Hz- 02 Nos (e) Astronomical time switch(Daily time switch) with suitable power contactor 63 Amps ML-2type, 3 Phase, 415 volts, Auto/Manual operating switches - 01 No (f) Digital voltmeter,with VSS -01 set (g) Digital, Ammeter,with CTs & ASS-01 set (h) LED phase indication lamps RYB-01 set (j) Aluminium bus bar TPN 400 Amps (04 Nos) rating -01 set (Note:- The contractor shall be submit the drawings (General& circuit lay out drawings ) for approval by the Accepting Officer/Engineer -in-charge before procurement)

Supply, installation, testing and commissinoning Busbar Panel of size 750 x 600 x 300 mm, made up with MS Iron Angle frame 40 x 40 x 5mm, 3 phase, 4 wire, 415 volts, AC, 50Hz, outdoor cubical type, sloping canopy top roof, floor mounted, free standing, dust and vermin proof, air ventilation with IP-54 made out of 3.15 mm thick CRCA sheet duly epoxy powder coated and CPRI approved Panel shall have front and rear opening,locking arrangement, cable alleys, bus bar chamber, hinged double door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate, aluminium bus bar duly covered with heat shrink sleeves colour coated, duly fixed and control wiring with copper conductor cables of adequate size and length, MCCB of 100 Amps, 16 KA, 4 pole - 01 No including aluminium busbar 160 Amps with epoxy insulator including all civil work/PCC foundation (PCC 1:2:4 type B1) as per site requirement and including taking down old unserviceable panel from existing location after disconnecting of existing cables complete all as specified and directed.

M&L for GI pipe 40mm dia (light grade) complete with all fittings in trenches, road/culvert crossing, on wall, floors, on roof, on pole for cable protection including taking down old unserviceable pipe complete all as specified and directed.

S&F Radium reflective for safety and warning tape, reflector tape sticker high intensity conspicuity of polythelene, red colour of size 10cm wide for electric pole and panels and other electrical equipments complete all as specified and directed.

M&L for earthing with glavanised steel earth plate electrode of size 60cmX60cmX6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts, check nuts and washers with galvanised iron strips of size 32 x 6 as earthing lead as shown in electrical plate No.3 of SSR Part-I connected to earthing test point all specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC (1:3:6) type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe , 40mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A-1 duly reinforced with 8mm dia TMT bar @150c/c both ways, one lifting handle made out of 10mm dia TMT bar 250 mm long embedded in cover slab and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layer of 15 cm thick including taking down old unserviceable earthing complete all as specified and directed. (Note: Galvanised iron strip of size 32x6mm upto 7.5m long including testing is deemed to be included with quoted rate).

M/S RAJESH TRADING CO (BID ID -3107194)

DAS ENTERPRISE (BID ID -3107215)

BEE ROMEN (BID ID -3111249)

ELECTRO COMMERCIAL CO (BID ID -3092751)