SPL REPAIRS TO PERIMETER FENCING ALONG VENDURUTHI CHANNEL BETWEEN KALAKENDRA AND HOUSE NO. KB511 AT KATARIBAGH, PROVISION OF HARDSTANDING BEHIND STORE HOUSE NO-12 AT MO(K), PROVISION OF BOOSTER PUMP AT P-128 (428 K) AND NOI AT KATARIBAGH KOCHI.

Amount

Dismantling fencing wire mesh any type complete all as specified.

Dismantling post or strut (wood, steel or RCC any section) including taking out embedded portion in concrete, brick work etc complete

Excavating in trenches n. exc 1.5m wide and n exc. 1.5m in depth for foundations etc, pier holes n exc 10sqm on plan and n exc. 1.5m in depth in soft /loose soil all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in plinth protection complete all as specified and as directed.

M&L for TMT bars in reinforcement 10mm dia and over including cut to length , bend to required shape , cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and as directed by Engr-in-Charge

M&L for TMT bars 5mm dia and over and including 10mm dia in stirrups, spacers and binders etc , cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC 1:2:4, Type B1, using 20mm graded stone aggregate for foundations incl rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs complete all as specified and as directed.

M&L for RCC 1:2:4, Type B1, using 20mm graded stone aggregate for Columns, piers, pillars and struts all as specified

M&L for Use and waste of form work rough finished flat to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified

M&L for Use and waste of Formwork rough finished surfaces of concrete square, rectangular or polygonal to sides of pillars, posts, struts, piers, columns and stanchions all as specified

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair surfaces of brick work or concrete surfaces, finished even and fair without using extra cement all as specified and directed

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint on new wall surfaces having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 15cm thick complete all as specified and directed.

Removing excavated material to a distance exc 1.5 Km and n.exc 5Km and depositing where directed at a level n.exc 1.5m above starting point complete all as specified and as directed.

S&F Mild steel post and struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. Flat iron fillets ( for securing wire mesh etc) incl all necessary drilling bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description and applying two coats of anti corrosive paint over a coat of anti corrosive primer complete all as specified.

S&F Mild steel screw bolts (machine made), 5 to 10mm diameter of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed by Engr-in-Charge.

Mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.90 mm dia or securing with clips quality conforming to Fe-410-W ) (Gde.E-250) quality-A or Fe 290 (Gde - E-165) round bar bars.

S&F MS galvanized Chain link fencing of mesh size 50mm x 50mm, 3.10mm dia including supply and binding with GI binding wire complete all as specified and as directed. Note: The minimum weight of MS galvanized Chain link fencing shall be 3.25kg/Sqm.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil all as specified and directed.

M& for Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment over and including a 30mm thick layer of coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling in layers n exc. 25 cm thick, well ramming including watering as required complete all as specified and directed.

M&L for Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) for kerbs, coping or chamfered on edges complete all as specified and directed.

Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 25 mm dia complete all as specified and directed.

All as per item No.25 here -in-before but of size 20 mm dia

Supply and fixing 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for CPVC pipe and taking down old one, complete specified and as directed by the Engineer-in-charge. Make : Model No: F2004201 of Cera or equivalent of prayag/ hindware /Jaguar

Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , including taking out old one all as per specified and directed by engineer in charge. Make : Model No: F8030102 of Cera or equivalent of prayag/ hindware /Jaguar).

S&F Centrifugal booster pump 1 HP, 0.75 KW, pressure setting range 2.0 to 4.5 kg/cm, tank capacity 24 ltrs ,rust preventive aluminium die casted motor body ,fitted with hot water seal, F-class insulation, suitable far hot water application all as specified and directed by engineer in charge. Make:- Cat part no. VB24F4A of V-guard or equivalent model of other manufacturers from the list. Note:- The quoted rate shall be inclusive of provision of suitable PVC canopy for protection of booster pump as per direction by engr- in- charge

M&L for CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings and taking down old unserviceable Ball valve complete all specified and directed.

Material and labour for sub main wiring with 2 runs of 4 Sqmm single core, PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC casing capping with all accessories on surface, one run of 4 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Three runs of 4 Sqmm size PVC copper cable and one run of PVC casing capping shall be measured as one unit .

S&F in replacement Modular sockets multipurpose 6 Amp & 16 Amps, 5 pin complete all as specified and directed

S&F switch modular type 1 module , 16 Amps, one way all as per specified & directed. Make -Legrand,L&T,Indoasian

shine industries

MS BUILDERS

SUKU CONSTRUCTIONS

Albert Rebello and Company

POOJA ENGINEERING WORKS

T K BUILDERS

M/s.Rejoy Constructions

K THOMAS AND COMPANY