Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.7 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹37.6 L+₹2.0 L (5.57%)Rejected-AOC KORAMANGALATH HOUSE TOMY LANE SOUTH PANAMBILLY NAGAR KADAVANTHRA P O KOCHI 682 020 | KOCHI | ERNAKULAM | KERALA | 682020 | L2 | Rejected-AOC NOT BEING L1 | |
| 3 | L3₹37.9 L+₹2.2 L (6.29%)Rejected-AOC BLDG NO XXVIII 378A NORTH CHAMPANOOR ANGAMALI SOUTH P O PIN 683 573 | ANGAMALI | ERNAKULAM | KERALA | 683573 | L3 | Rejected-AOC NOT BEING L1 | |
| 4 | Rejected-Technical MAKKIL HOUSE MUNDAMVELI POST MOOLAMKUZHI KERALA KOCHI 682 507 | ERNAKULAM | KERALA | 682507 | - | Rejected-Technical Not enlisted in b(i) category |
Tender Value
₹40.5 L
EMD Value
₹81,000
Closing Date
25 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Yogendra Kumar GE
GE (I)(CG) Kochi
ADDITIONN ALTERATION TO OFFICERS MESS OF CGAE KOCHI
2023_MES_614595_1
8893/E8
Open Tender
Civil Works
Item Rate
180 days
kochi
As per tender documents
8 documents required · 8 mandatory
₹500
GE (I)(CG) Kochi
₹81,000
17 Nov 2023
19 Aug 2023
2 Oct 2023
19 Aug 2023
25 Sept 2023
11 Sept 2023
19 Aug 2023 - 26 Aug 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.
Demolition of brick or PCC block masonry built in cement mortar including all quoins,arches,pillers etc but excluding ashlar facings,dressed stone work and precast concrete articles complete all as specified and as directed.
Material and labour for precast PCC 1:3:6 Type C1 using 20 mm graded aggregate solid block masonry exceeding 10 Cm width(with plain or interlocking joints as directed), built in cement mortar 1:6 all as specified and as directed.
Material and labour for precast PCC 1:3:6 Type C1 using 20 mm graded aggregate solid block masonry not exceeding 10 Cm width(with plain or interlocking joints as directed), built in cement mortar 1:6 all as specified and as directed.
Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water etc complete all as specified and as directed.
Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed.
Material and labour for 15 mm thick rendering on brick/concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for providing 25mm thick plain cement concrete 1:2:4 mix type B0, using 12.5mm graded stone aggregate as in under layer to flooring finished rough to reiceve toping complete all as specified and as directed.
Material and Labour for vitrified ceramic tiles 8-10 mm thick light shade area of each tiles not exceeding 0.42 sqm but not exceeding 1.0 Sqm, of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:6 and pointed in coloured cement to match coloured tiles complete all as specified and as directed. NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.
All as per item No09 above but in vertical surfaces like skiting/dado etc jointed in neat cement slurry and pointed in colored cement to match colour of tiles over and including 15mm thick backing coat in CM 1:4 complete all as specified and as directed. NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.
Material and Labour for glossy finish coloured vitrified ceramic tiles 8-10 mm thick of size 800mm x 1600mm, of any pattern (pattern consists combination of two or more tiles ) as in vertical surfaces etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 10mm thick screed bed in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and as directed.
Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary hangers 6mm dia GI up to1200mm length adjusting level fixed to roof slab by means of cleats made out of FI 40x3mm size 60 cm long and expansion holdfast 12.5mm dia 40mm long with and including 12mm thick gypsum board fixed with machine screws and treating the Gypsum borad sheets with thin layer of Gypsum anhydrous binder and prepare the surface till smooth surface is achieved and applying two coats of plastic emulsion paint of any pattern and design over a coat of texture primer on ceiling sheets all complete as required as per manufacturer’s instructions and as directed by the Engr-in-Charge. Notes : 1. The pattern and design shall be as directed by the Engr-in-Charge during the execution of work. 2. The exposed surface of the false ceiling shall be joint less, even and smooth to receive two coats of plastic emulsion paint 3. The Gypsum borad Sheets shall be fixed with suitable screws below the grid and shall not be placed over the grid. 4. The joints two of Gypsum sheets shall be jointed with fibre Gyproc joint paper tape designed for reinforcing vertical,horizontal joints and for internal and external corner joints.
Materials and labour for providing plaster of paris ceiling (gypsm anhydrous) ornamental cornices and boarders or corner design/projected ceiling designs of approved pattern upto 100mm wide along the false ceiling fixed with cadmium plated screw, two coats of plastic emulsion paint of any pattern and design over a coat of primer, complete all as specified and as direcetd. Notes : The pattern and design shall be as approved by GE during the execution of work.
M & L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and and applying two coates of plastic emulsion paint over a coat of suitable primer on wall surfaces complete all as specified and as directed by Engr in Charge .
Material and labour for preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of weather proof acrylic emulsion exterior grade (anti fungal paint) premium quality of any tint as approved complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new plastered/concrete surfaces of walls, providing one or more coats of Birla white wall care putty to achieve smooth surfaces and applying two coats of distemper oil emulsion of approved shade/tint over a coat of compatiable priming paint complete all as specified.
Material and Labour for preparation of plastered surfaces of wall and applying two coats of weather proof anti fungal exterior emulsion paint over a coat of primer complete all as specified and as directed. Make: Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger
Supply and fixing venetian blind(vertical blind) using nylon fabric of approved colour and size of blind 100mm wide and length as per requirement including powder coated aluminium channel with operating rope etc and making good disturbed surface including removal of old venation blind and its frame complete all as directed.
Supply and fix 10mm thick toughened glass, crystal polished in squares exceeding 0.5 Sqm in each pane as cubical cabin /working table top fixed with adhesive of high quality complete all as specified and as directed by Engineer in Charge.
Supply and fix 12mm thick toughened glass, crystal polished in squares exceeding 0.5 Sqm in each pane as cubical cabin /working table top fixed with adhesive of high quality complete all as specified and as directed by Engineer in Charge.
Material and Labour for Granite 18 mm thick of any type work (table rubbed and polished) in steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like in over and including 10 mm thick backing coat in CM 1:4 complete all as specified. Including pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite (including moulding etc).
Supply and fix solid hard core panelled shutter 2 panel of 25 mm thick with 45mm FRP door frame including drilling holes to walls columns and fixing the chowkats to wall with 3 Nos (for each side of frame) of stainless steel fastners10mm dia, 100 mm long, 2 Nos of stainless steel hinges 100 mm size, 2 Nos of PVC tower bolt 100 mm size, 1 No of PVC aldrop bolt 200 size, 2 Nos of PVC handle 100 mm size etc complete for door of size 750 mm x 2100 mm complete all as specified and as directed.
Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in as in beams, cantilever, lintels over 1.5M span etc complete all as specified and as directed.
Material and labour for RCC M-30 design mix using 20 mm graded stone aggregate as in slabs supported on wall, beams and columns, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Material and labour for TMT bars(CRS/HCR), 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.
Material and Labour for TMT(CRS/HCR) bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed.
Use and waste for form work to sides and soffits of beams, lintels etc, fair finished flat surfaces of concrete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, and similar work, not exceeding 200 mm thick etc, fair finshed surfaces of concrete (Horizontal or sloping) complete all as specified and as directed.
Material and labour for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glued pinned at joints, fixed to wall and making good to wall all as specified and directed.
Material and labour for Indian teak wood plain solid straight chowkats and frames with deceratieve carving/design of any pattern on both sides, wrought framed rebated on the solid rounded or chamfered put together with glued pinned at joints, well seasoned and finished with two coats of melamine polishing over a coat of wooden filler and sealer, fixed to wall and making good to wall carving as approved all as specified and directed.
Supply and fixing 2nd class hardwood factory made plain framed panelled shutters 30mm thick with lock rail and with panels of timber flat on both edges(feather edged) or 12mm thick commercial veneered particle board veneers on both side or with 9mm thick BWP commercial ply, size of members of shutters as specified in IS 1003-Part-I, kiln seasoned and chemically pressure treated, including two coats of melamine polishing over a coat of wood sealer etc.. complete all as specified and as directed.
Supply and Fix 18mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc all as specified and directed. Note: Rate includes for All exposed edges/surfaces to be finished with same laminated sheet edge tap to match with the other surfaces.
Supply and Fix 12mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc all as specified and directed. Note: Rate includes for All exposed edges/surfaces to be finished with same laminated sheet edge tap to match with the other surfaces.
Supply and fix Cast brass powder coated auto lock and release concealed hinges of size 100mm complete all as specified and as directed.
Supply and fix Cast brass powder coated Box type decorative door handle of size 100mm complete all as specified and as directed.
Supply and fix IInd class hard wood plain fillets square or rectangular or triangular, clean swan of sectional area exc. 6 sqcm and not exc. 13 Sqcm fixed with nails or brads, including two or more coats of French polishing over a coat of wood filler complete all as specified and as directed.
Material and labour for two or more coats of French polishing on wooden surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler complete all as specified and as directed.
Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 110mm dia fixed to wall complete all as specified and as directed.
Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 75mm dia fixed to wall complete all as specified and as directed.
Supply and fix PVC (SWR) bends 110mm with access door complete all as specified and as directed.
Supply and fix PVC (SWR) bends 75mm with access door complete all as specified and as directed.
Supply and fix in repairs 110mm PVC (SWR) branch piece , single (Single Y) equal or unequal all as specified and as directed.
Supply and fix in repairs 75mm PVC (SWR) branch piece , single (Single Y) equal or unequal all as specified and as directed.
Supply and fix 15 mm bore two way Bib tap 15mm bore cast copper alloy with capstan heads fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed. Make: Jaquar cat part No CP , LYR-38041 or equvalent
Supply and fix Single lever 3 inlet Divertor Exposed parts kit Cat part No Jaquar ALI 85193K Consisting of Operting lever, wall flange & buttonf only suilatbe for ALD 193
Supply and fix Conceled Body for 3 inlet Single lever diverter cat part No ALD 193 with button assembly cartridge sleeve but withoutor Exposed parts
Supply and fix Overhead shower dia 200mm square shape single flow with air effect (ABS body & Face plate stainless steel with Rubit Cleanign System) cat part No OHS-1619
Supply and fix Bowl with cistern for extended wall hung WC with PP soft close seat cover, hinges, Dual flush cistern, fitting, acesseries set Size 380x630x770mm Jaquar Cat part- CNS WHT-353SPPZ
Supply and fix single lever basin mixer without popup waste system with 450 mm long braided hoses of Jaquar cat part No VGP-81051B
Supply and fix table top wash hand basin with fixing acessseries sixe 595x445x135 mm Jaquar cat part No JDS-WHT-25931
Supply and fix Hand shower ( Health faucet) with 8mm dia 1.2 mtr long flexible tube and wall hook of Cat part No Jaquar ALD 573
Supply and fix Soap dish holder of Jaquar cat part No ACN-1131N
Supply and fix Corner glass Shelf with bracket of Jaquar cat part No ACN-1173
Supply and fix Glass Shelf 550 mm long of Jaquar cat part No AQN 7771
Supply and fix Toilet Roll Holder of Jaquar cat part No AKP-35751P
Supply and fix Bath tub spout with button attachment for hand shower with wall flange of Jaquar cat part No SPJ-463PM
Supply and fix Hand shower of dia 105mmm round shape single flow with air effcet (ABS body and face palte chrome plated) with rubit cleanaing system of Jaquar cat part No HSH -1717
Supply and fix Flexible tube 8mm dia and 1.5m long with nuts of Jaquar cat part No SHA-549D8
Supply and fix aluminium powder coated (Thickness or powder coating not less than 50 micron) frame for doors,windows, ventilators with one or more rebates with joint clip and using rubber beading etc complete all as specified and directed. Note : Quoted rate shall be inclusive of rubber beading, glazing clips. Glass panel/particle board panel filling shall be measured and paid separately.
Supply and fix Aluminium Powder coated sliding window shutter using aluminium section weighing 0.55kg/m, 20mm thick using standard vertical handle section, interlocking section, top and bottom rails, U channels for all -around for gauge shutters. All sections are of medium weight series of approved make in three track sliding window in which two shutters of with and including of 4mm thick Modi guard or equivalent float glass and one shutter fixed with inclusive of stainless steel wire mesh of size 0.30mm nominal dia and average with of aperture 1.40mm, including necessary jointing cleats, glazing clips , good quality bearing rollers, Neoprene rubber Gasket and rubber beading of any type, screws , aluminium fitting such as Gasket, handle (01 Nos on each shutter), interlocking arrangements complete all as specified and asdirected by Engr in Charge. Note: The quoted rate shall be inclusive of 4mm thick float glass and Stainless steel wire cloth.
S&F aluminium ventilator (powder coated with approved colour) partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.20 mm thick, half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed including taking down old unservicable one
Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Make: SANDHU, EVEREST
Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed suitable for 25 mm ISI marked and taking down unserviceable ball valves all as specified and as directed.
Supply and fix new Rotational moulded polyethylene water storage tanks having capacity 1000 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position including over flow and drain out pipe complete all as specified and directed.
Supply and fix Chromium plated steel grating 100mm dia complete all as specified and as directed.
Supply and fix PVC (SWR) floor trap , plain with grating including jointing with solvent cement 75mm bore complete all as specified and as directed.
Supply and fix PVC (SWR) multi floor trap , plain with grating including jointing with solvent cement 75mm bore complete all as specified and as directed.
Supply and fix door closer hydraulically regulated, designation No.3 universal type, of Aluminium (extruded section body)suitable for door shutters of 851 to 1000mm width and of weight between 61 to 80kg complete all as specified and as directed.
Supplying and laying 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors/ trenches complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting exceeding 20cm girth all as specified and directed.
Taking down carefully (copper/aluminum) point wiring complete of any type (batten/surface conduit) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants regulators etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster or tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.
Taking down ceiling fan of any type and size, cable ends, dimantling blades and removing fan and balde to store yard all as specified and directed.
Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FRLS) upto and including working voltage 1100volts grade, drawn through and including PVC casing and caping including all accessories ISI marked including press fit white PVC open switch/surface board high strength and crack resistance and unsheathed copper conductor stranded cable(FRLS) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for the following:-. (a ) one light point controlled by one switch 5 Amps
(b ) one fan point point controlled by one switch 5 Amps
(c) One 3 pin socket outlet 5 Amps on Independent board
(d ) One 3 pin socket outlet 5 Amps on same board
All as per Item No. 74 above but with 4 sq mm PVC insulated copper conductor cable(FRLS) including 4 sq mm PVC copper conductor used as earth wire for power point on independent board for One 3 pin socket outlet, 15 Amps.
Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed.
Supply and fix Modular socket outlet, 6 Amps, 2 and 3 pin combined complete all as specified and directed.
Supply ans fix Modular socket combination 16 A, 6 pin, 3 module complete all as specified and directed.
Supply and fix Modular fan regulator step type, 120 Watt complete all as specified and directed.
Supply only LED luminaire 600 mm x 600 mm,40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make: Havells Cat part No. PLANO2X2PLR42WLED840S or equivalent in Philips/Bajaj/Surya.
Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM service value 6.00 BEE. Five Star rated with brushless direc current motor (BLDC) complete all as specified and as directed.
Supply, install and commissioning 1.0 TR capacity split type air conditioner, inverter type, 5 Star / ISEER -5.33 or as per latest BER norms, hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter, with copper tube condencing unit including provision of suitable bracket fixing arrangement, copper pipe of required length and insulation complete all as specified and as directed. Make: Daikin/Hitachi/LG/Voltas
Supply, install and commissioning 1.5 TR capacity split type air conditioner, inverter type, 5 Star / ISEER -5.33 or as per latest BER norms, hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter, with copper tube condencing unit including provision of suitable bracket fixing arrangement, copper pipe of required length and insulation complete all as specified and as directed. Make: Daikin/Hitachi/LG/Voltas
Supply, install and commissioning 2 Ton capacity split type air conditioner, inverter type, 5 Star / ISEER -5.33 hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter, with copper tube condencing unit including provision of suitable bracket fixing arrangement, copper pipe of required length and insulation complete all as specified and as directed. Make: Daikin/Hitachi/LG/Voltas
Supply and fix sheet metal enclosure distribution board with double door for MCB, TPN 4 way, 415 volts with 200 Amps rated neutral bus bar including taking down old DB complete all as specified and as directed. Note: MCB shall be measured and paid separately.
Material and labour for sub main wiring with 4 runs of 10 sqmm FRLS single core multistranded copper conductor PVC insulated and unsheathed drawn through and including rigid non-metallic PVC conduit 32mm dia size with all accessories fixed to walls/ceiling including 2 run of 10 Sqmm copper (insulated) FRLS cable as earth continuity conductor including complete all as specified and as directed. Note : 6 runs of 10 Sqmm copper cable and one run of PVC conduit 32mm dia shall be measured one unit length.
Supply and Fix Voltage stabilizer for automatic operation, 4 KVA capacity single phase, naturally air cooled indoor type designed for input 170V to 270V with output voltage stablized at 230V with accuracy of ± 2.5% and with time delay complete all as specified and as directed. Make: V Guard/ Voltas/ Aplab/ AE/ Power Wave/ Microtech/ Numeric
Supply and Fix Voltage stabilizer for automatic operation, 5 KVA capacity single phase, naturally air cooled indoor type designed for input 170V to 270V with output voltage stablized at 230V with accuracy of ± 2.5% and with time delay complete all as specified and as directed. Make: V Guard/ Voltas/ Aplab/ AE/ Power Wave/ Microtech/ Numeric
Supply and fix MCB SP 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed.
Schedule of Credit (Minus) Rs.400.00 NOTE: Bidder shall insert credit amount of Rs. 400.00 as rate in Green field under Col-13.
K.V.GEORGE AND COMPANY
K R JOSEPH AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .