work

Amount

Following works are to be carried out at 220 KV S/S Gomtinagar Lucknow for the construction of 33 KV 'PINTAL Bay" along with associated works including all cost of men, misc, consumables, T&P, Crane etc. to complete the Job satisfactorily

Supply

33 K.V. C.T. Bi-metallic Clamp duly made of Aluminium Alloy (LM 6), suitable for 33 K.V. CTs and Twin ACSR 'Panther' Conductor, complete with HDG Bolts - Nuts - Washers, as per sample.

33 K.V. C.B. Bi-metallic Clamp duly made of Aluminium Alloy (LM 6), suitable for 33 K.V. VCBs and Twin ACSR 'Panther' Conductor, complete with HDG Bolts - Nuts - Washers, as per sample.

P.G. Clamp made of LM - 6 Alloy having suitable for AAC 'Tarrantullah' to 'Panther' Conductor, complete with Bolt - Nut - Washers (4 No. Nut & Bolts), as per sample.

P.G. Clamp made of LM - 6 Alloy having suitable for Moose' to 'Panther' Conductor, complete with Bolt - Nut - Washers (4 No. Nut & Bolts), as per sample.

P.G. Clamp made of LM - 6 Alloy having suitable for ACSR 'Panther' to 'Panther' Conductor, complete with Bolt - Nut - Washers (4 No. Nut & Bolts), as per sample.

33 K.V. Bus Post Insulator Clamp duly made of Aluminium Alloy (LM 6), suitable for 33 K.V. Post Insulator and ACSR Twin 'Panther' Conductor, complete with HDG Bolts, Nuts & Washers.

75x10 mm MS FLAT

50x6 mm MS FLAT

25x6 mm MS FLAT

33kv,300mm2,3 core outdoor type terminationb kit with all accessories

(B) Work

Safe Loading, Carriage of various euipments like- 33 KV VCB, Control cables & power cables of various size, MS Flat of various size, 33 KV CT etc. required for construction of 33 KV `PINTAL, from Various 220/132 K.V S/S Lucknow To 220 KV substation Gomtinagar , Lucknow and Unloading at storage place as per direction of Supervising Engineer including cost of Hydra, Carriage vehicle, Men, Misc. consumables, T&P, making coil of cables before loading etc. required for satisfactory completion of Job.(01 Job for all items)

Erection of main and auxiliary structures

Main & Auxiliary Structure Lattice type

Erection of following Equipments as per instruction manual and technical specifications including shifting of materials from Central Stores to Erection Site including all associated works.

33 KV VCB with structure

33 KV CT Junction Box.

33 KV Post Insulator

33 KV LI with earth blade

33 KV BI without earth blade

Jumpering of various equipments with Twin ACSR "Panther Conductor " in after due cutting and bending of conductor and fixing & tightening etc of the Conductor/ Clamps/Connectors/Spacers etc.

Laying of following sizes Control Cables in the Cable Trenches from Control and Relay Panels in Control Room to various Equipments, Junction Box etc. in Swithcyard as per cable schedule, its sddling with 25X3 mm size including carriage of Cable Drums from Stores to work site & shifting back to stores including allother associated works required for the satisfactorily completion of the Job as per technical specification.

Laying of 2X2.5 sq. mm size Control Cable

Laying of 4X2.5 sq. mm size Control Cable

Laying of 6X2.5 sq. mm size Control Cable

Erection of new 33 KV Tripple Feeder Control and Relay Panel by grouting and proper earthing with M.S. Flat including shifting of new 33 KV Tripple Feeder Control and Relay Panel store to control room.

Interconnection & termination of of the above laid control cables between Control and Relay Panels & erected equipments i.e. CB, CT, CT Junction Box, PT, PT Junction, box. Including making necessary holes in Gland Plates or Boxes whereever required along with supply of Cable glands of appropriate size and providing of Ferrules for each core of the cables & its termination with crimping type Copper Lugs alongwith preparation of Interconnection Drawing and Commissioning of the Panel/ Feeders in co-ordination with T&C Wing includoing providing 02 sets of Hard Copies of as executed Interconnection Drawing including all other associated works required for the satisfactorily completion of the Job as per technical specification. (01 Job for Each Bay)

Cutting, Straightening and Laying 700 mm below inside ground & above ground of 75X10 mm, 50X6 mm, 25X6 mm size M.S. Flats (to be provided by the department) as per requirement for Earthing of newly erected equipments and Structures as above including welding with main Earthmat and with the object to be earthed including excavation, backfilling, painting of the Earthmat above groung level in Bus Green colour including all other associated works to complete the job satisfactorily as per Technical Specifications.

Earthing of Structures and Equipments with 75X10 mm size M.S. Flat

Earthing of Structures and Equipments with 50X6 mm size M.S. Flat

Earthing of cable trenches with 25 mm x 6 mm size M.S. Flat

Painting of Earthing strips above ground level with one coat of Red oxide and two coat of synthetic/ enamel paint and with black Bitumen paint below ground level as per details below:

75x10 mm (in green color)

50x6 mm (in green color)

25x6 mm (in black color)

Laying of Cable Al 3CX300 sq mm XLPE 33 KV between jack bus isolator to line isolator below(1000mm) ground level including exacavation of pit and laying of cable and putting 1st class bricks on its 75mm edge along with cable on both side.Filling the same with GANGA sand and then putting bricks on 115mm crossing side over cable and filling with earth including cost of bricks ,sand etc work also inclued to shifting of power cable from store to work site.this works also included termination of jointing kit(04 nos) on both side of cable on both cable.

Supply & Fixing of outdoor type 03 Phase AC Cubical Boxes of size 1200X600X300 mm duly Painted with one Coat of red oxide primer and two coat synthetic enamle smoke gray paint with 04 no aluminium isulated bus bar for connecting ACDB and fitted with 01 no 100 Amp isolator switch along with three no 3-phase MCB of rating 32A 09 nos 3 phase mcb rating 16A, 3 nos 1 phase MCB of Rating 6A mcb havels make . The cubical box should be made of 16 SWG M>S> sheet in the Double shutter with indoor loacking arrangment complete with proper size wire TBs for incoming terminals and 18 nos TBs for outging terminals of Standerd size and rating . Proper Fixing installation ntesting and commissining of above cubical box including all civil and other associated works

Laying of Power cable of size 3.5X50/95 mm between main ACDB to AC cubicle box if required after exacavation of trench Laying the first class brick lining .Filling of river sand along and over the cable then back filling and leveling the trench after the cable . The work also includes termination of cable on both side with crimping of lugs .

Supply & Fixing of 160 Watt LED street light luminaries (outdoor type) of PHILIPS/CROMPTON GREAVES ]/ HAVELLS/BAJAJ make in single piece aluminium die cast, at designated height on gantry/beam on G.I. Light Bracket including guiding the cable to light fixtures from inside pipe/bracket, cable terminations and it’s testing and commissioning and earthing with 12 SWG Wire.

Supply & Fixing of of G.I. light Bracket duly made of 40 mm dia/dia suitable for Sl. No. 1(a) , 1.2 meter long 'B' class GI pipe and bent at one end by Quarter Circle in 1.0 meter length at an angle of 30 degrees for fixing 120 watt LED Light fitting on Gantry with the help of G.I./ M.S. clamps as required (01 job per Light).

Supply & Fixing of Lighting Junction Box of size 280X225X150 mm duly made of 16 SWG M.S. BP sheet and painted with smoke Grey Colour Synthetic Enamel Paint duly fitted with 01 no. 6 Amp SP MCB on anodized M.S. channel, 01 no. of Bakelite Fuse Fitting with 6 Amp capacity , 1 No. 6A Capacity NS6 type HRC Fuse, 01 no. Copper Neutral Link, Bakelite Terminal Block of 04 Terminals, Cable Glands suitable for 2C/4C X2.5 sq. mm size Including Incoming/ Outgoing Cables etc. and installation of Junction Box. on G.I Pipe Light Pole at designated height with the help of suitable M.S. Clamps alongwith Earthing of Junction Box. with 12 SWG G.I. Wire pole including cable Terminations with satisfacory Testing and Commissioning.

Supply & Fixing of Name Plates made of 2 mm thick Aluminium Sheet covered with 3M HIP Retro Reflective Sheet of following size with details/name written as per prescribed colour scheme to be fixed with the help of Nuts and Bolts at already installed Equipments' Structures in the Switchyard with all cost of Plates, Nut & Bolts, misc.materials like chains in case of breakdownshutdown plates etc., T&P and Labour as per Technical Specificaions & direction of the concerned Supervising Engineer:

Plates of size 300 mm X 200 mm

Plates of size 500 mmX 250 mm

Providing & Fixing of 'R', 'Y' & 'B' Phase Plate Sets consisting of one Plate of Red, Yellow, Blue Colours in each Set & Plates of dia 250 mm duly made of 2 mm thick Aluminium Sheet with face fully covered in Red, Yellow & Blue Colours with 3M HIP Retro Reflective Sheet and the Phase Plates Set to be fixed with the help of Nuts and Bolts at already installed Equipments' Structures in the Switchyard with all cost of Plates, Nut & Bolts, misc.materials, T&P and Labour as per Technical Specificaions & direction of the concerned Supervising Engineer.

M/s Patel Enterprises (BID ID -4831232)

M/S JAI HANUMAN POWER ENGINEERS (BID ID -4831398)

lodhi switchgear enterprises (BID ID -4829671)

Meena Elect & Engg. Works (BID ID -4828813)