Repairs to the damaged RR boundary wall and chain link fencing of Green Belt around HWPM plant site

Amount

Providing required men, machinery, tools & tackles for Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth 1.5 m in width as well as 10 sqm on plan) including backfilling of the same after completion of work and disposal of excess earth lead upto 50 m and lift upto 1.5m, disposed earth to be levelled and neatly dressed etc., all complete as per specification and as directed ny the Engineer in Charge. (Note-Including dewatering if required)

Providing and laying in position Reinforced cement concrete of grade 1:2:4 (1 ordinary portland cement 43 grade of ACC/ Ultratech/ Birla A1 : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) for footings, Columns & beams upto floor V level including cost of Centering/ Shuttering, compaction, levelling, finishing and curing but excluding the cost of reinforcement etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and laying in position Reinforced cement concrete of grade 1:1.5:3 (1 ordinary portland cement 43 grade of ACC/ Ultratech/ Birla A1 : 1.5 coarse sand : 3graded crushed stone aggregate 20 mm nominal size) for Columns, Posts and Struts upto floor V level in required shape including providing holes for tieing of fencing at required spacing ,compaction, levelling, finishing and curing but excluding the cost of reinforcement etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and fixing Centering/ Shuttering for Columns, Pillars, Piers, Abutments, Posts and Struts including strutting where ever required and removal of form after setting of concrete for all heights etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing, transporting, placing in position TMT reinforcement steel of grade Fe415D/ 500D of SAIL/ TATA/ JINDAL/ VIZAG for R.C.C work including straightening, cutting, bending and binding with 16/18 gauge MS annealed binding wire, providing and placing cover blocks etc., complete all as per specification and as directed by the Engineer In Charge.

Demolishing Brick Masonry/ RR Masonry/ Concrete work including removing and disposing the dismantled material at designated places and stacking the serviceable materials, handing over to the sectional stores etc., all complete as per specification and as directed by the Engineer in Charge.

Reconstruction of Random rubble masonry using available stones upto & above plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) in walls and foundation including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size), including demolishing of damaged/ fallen RR masonry/ PCC, cleaning the stones for re-use, handing over of Y angles to sectional stores and disposing off all the debris at designated location lead upto 50m etc., all complete as per specifications and directed by the Engineer In Charge.

Construction of Random rubble masonry using new hard stones upto & above plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) in walls and foundation including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) lead upto 50m etc., all complete as per specifications and directed by the Engineer In Charge

Providing, transporting, placing in position at site Structural steel members of angles, rounds made of VIZAG/ TATA/ SAIL/ JINDAL of required size for making grills including drilling of holes upto 12 mm dia for fixing of frame and "Y" angles for fixing of barbed wire fencing including bottom to be split and bent at right angle in opposite direction for 10 cm length and embedded with concrete (Concrete to be paid seperately) inclduing applying a priming coat of steel primer and two coats of synthetic enamel paint of Asainpaints/ Nerolac/ Burger make etc., all complete as per drawings, specifications and as directed by the Engineer in Charge.

Provding required men, tools & tackles for removing the barbed wire from the fallen boundary wall and refixing the same to "Y" angle placed at top of the new wall at required distance with G.I. staples, turn buckles etc., all complete as per drawings, specifications and as directed by the Engineer in Charge.Note: Payment to be made per metre length of barbed wire refixed.

Provding required men, tools & tackles for removing of G.I. Concertina coil from the fallen boundary wall and refixing the same upto 3 m height of wall with angle iron ‘Y’shaped placed 1.5m apart and with 7 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron etc., all complete as per drawings, specifications and as directed by the Engineer in Charge. Note: Payment to be made per metre length of concertina coil fixed.

Providing and fixing with G.I. barbed wire Fencing to "Y" angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles including removing of old and handing over to sectional stores etc., all complete as per specifications and as directed by the Engineer-in-charge. (Cost of posts, struts, earth work and concrete work to be paid for separately). Note: Payment to be made per metre cost of total length of barbed wire used.

Providing and fixing chain link fabric fencing Made of G.I. wire of 4mm diameter of required width in mesh size 50x50 mm including strengthening with 2 mm dia G.I. wire, nuts, bolts and washers as required and providing , , complete including all materials, labour, transport, scaffolding as required and cleaning after completion of work etc.complete as per specifications and as directed by the Engineer. etc., all complete as per specifications and as directed by the Engineer-in-charge.

Providing required men, materials, tools & tackles for clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish including disposal of same to designated location and burning the same under controlled fire conditions etc., all complete as per specifications and as directed by the Engineer in Charge.

Pruning of trees of average girth 30 cm to 60 cm (measured at a height of 1M above ground level) and upto a height of 5M or as directed including transportation and disposal of the pruned material to the burning point (location of disposal will be shown by the department) within a week after cutting and burning the same under controlled fire conditions including tools and tackles etc., all complete as per specification and as directed by the Engineer in Charge.

naresh constructions

M/s MEERAIAH CONTRACTOR