Shifting of existing pumping Machinery along with allied equi and Providing install testing and com of Monosub 5000 GPH discharge x 30MH confirming to relevant ISO with all latest amendments with allied electro mech works at pumping st. Rajpur Kampi

Amount

Providing, of Monosub5000 GPH x 30MH (Head Range +10-25), coupled with suitable motor. The recommended make of Pump should be KSB/Mathur and Platt along with recommended make of motor. The pumping Machinery should confirm relevant ISO with all latest amendments. The equipment shall also be accompanied with test certificates and performance curves.

Installation, testing and commissioning of Monosub 5000GPH x 30MH along with allied electromechanical equipment by way of Fabrication of GI pipe nipple with threads at one end & MS flange at other end & fastening the threaded end of nipple with the delivery of Monosub. Providing/fitting of 6mm square submersible cable -30 mtr for making of connection from submersible control panel to motor with proper thimbling and insulation. Lowering of monosub set along with GI pipe nipples with the help of chain pulley block, ropes & skilled/unskilled labours. Providing/Fitting of nut/bolts & washers, and interconnecting with the raising main with all allied welding work. Providing /fitting of 5 HP Automatic control Panel--01Nos. Extension of LT network from pump room to percolation well by way of providing/erection of 02no LT pole, providing /fitting of shackles insulators and U clamps, providing /stringing of al-conductor 25mm sq , making connections from control panel to motor. Testing and commissioning of electro mechanical works by checking of all electrical connections, tapping and tightening all other connections. Testing the machinery on full. The job also includes the carriage /shifting of pumping machinery and allied electro-mechanical equipment from stacking place to site of work on MT and HL. Complete job includes cost of material, carriage charges, labour charges and charge for tools and tackles required for execution of work at site.

Laying of foundation block of RCC for installation of HCP 5000 GPH X 325 MH and HCP 5000GPH X 350MH at p/stn Rajpur Kamila Nowshera by way of dismantling the pumping machinery and uprooting the base frame from the existing structure/ block inside the Dug well, shifting the same into the newly constructed pump room near the Dugwell by engaging, skilled/unskilled manual Labour. Excavation in trenches for laying of foundation block of size 2mtr x 1 mtr x 1mtr depth inside the pump room by way of excavation of floor and disposal of the excavated earth by using manual labour outside the premises. Cleaning and levelling of excavated trench for 02No HCP sets. The job includes fabrication, welding and laying of steel mesh made from 10 mm tor steel placed horizontally, vertically and diagonally at equal distance including form work. Laying of foundation block of RCC in the ratio 1:1.5:3 (cement, sand and Bajri) and grouting of fabricated foundation bolts. The entire block to be laid in such a way that it can dump all types of mechanical vibration created by dynamic load of the pump and motor. Placing of base frame and leveling. Tightening of base frame by fastening of 6 No. foundation bolts. Complete job includes cost of all types of material such as cement, sand, Bajri, tor steel, foundation bolts, nuts, bolts, washers, carriage of material to site of work on H/L, hire charges of tools and tackles, labour charges of skilled and semi-skilled workers. Complete job.

Installation of HCP 5000 GPH X 325 MH and HCP 5000GPH X 350MH at p/stn Rajpur Kamila Nowshera along with allied works by way of placing the HC pump set and motor on the base plate tightening of foundation bolts of pump and motor set fixing of coupling pulley on drive end side of pump and motor shaft with the help of cotters and coupling bolts. Proper leveling of pump motor set on the base frame by way of providing steel shims and checking the alignment of pump motor set. Complete job including cost of material such as bolts, nuts, washers, shims coupling bolts and tools and tackles required for execution of the job. Fabrication, fitting and laying of 80 mm dia suction line from service reservoir upto the suction of HC pump set as per site requirement by way of cutting, fitting of 80 mm dia flanges and welding by using good quality electrodes so as to get leak proof joints. fitting of 80 mm dia sluice valves with flanges, bends properly welded as per site requirement which is required for stopping the flow of water in suction line for maintenance of pump set. Providing and fixing reducer nipple with flanges on both sides with proper bend to be fitted on the suction side of the HC pump sets. Complete job including cost of material, labour charges and hire charges of tools and plants required for the execution of the job. Fabrication, fitting and laying of 80 mm dia delivery line for HC pump sets. Fabrication and fitting of expander nipple on the delivery side of pump set with flanges on both sides to be connected with delivery side of the pump set with matching holes on one side and 80 mm dia delivery line on the other side. Providing and welding 80mm dia half bends with flanges on both sides as per site requirement. Fitting of 80 mm dia sluice valves and reflux valves. with nuts, bolts and gaskets with proper flanges on both sides. Extension of the delivery line from reflux valve upto the common manifold by way of providing bends nipples etc. as per site condition. The complete welding work on the delivery line shall be done by using superior quality welding electrodes so as to avoid any air gap and to ensure leak proof joints. Complete job including cost of material, hire charges of tools and plants. Laying and fixing of common delivery manifold outside the pump room for interconnection of pumping sets as standby arrangement. The delivery lines of both the pump sets shall be connected/ joined/ welded with the common delivery manifold. Making interconnections of common delivery manifold with 80 mm dia existing rising main by fabrication and fitting of nipples, bends, flanges as per site requirement. Testing and commissioning of HC pump motor set with stand by and all other allied electro mechanical works by checking alignment of pumping set and Plugging of leaking joints if any by way of welding, replacement of gaskets and tightening of nuts and bolts. Testing the machinery on full load.

Dismantling, carriage/Shifting of 100KVA voltage stabilizer, and uprooting of existing angle iron panel board and allied electro-mech equipments from inside the Dugwell and then fitting /grouting the same inside the pump room by way of fitting of 200 Amp 415V HRC type main switch (H/DUTY) -01 no, Providing/fitting of 185mm square aluminium cable -25 mtr-3.5 core for making of connection from busbar fuse system to main switch with proper thimbling and insulation. Providing /fitting of submersible automatic control panel fitted with single phase, over load protection relay of suitable capacity for operation of monosub Providing /fitting of 200amp busbar on the panel board. Providing/fitting of copper cable for making of electrical connections from 200Amp main switch to 100 KVA voltage stabilizer and then to 200amp busbar. Providing /fitting of 60HP star-delta starters-02Nos oil immersed with double contact on the panel board with proper thimbling. fitting of copper cable from output of starters to the motors. Checking continuity of whole electric circuit. Testing and commissioning of electro mechanical works by checking of all electrical connections, tapping and tightening all other connections. Testing the machinery on full load. Complete job

PERFECT ELECTRICAL WORKS

NATIONAL ELECTRO-MECH COMPANY