SPECIAL REPAIRS IN OR MARRIED ACCN OF BLDG NO P-14/1 TO P-14/8 AND P-15/1 TO P-15/8 AT REYNOLDS ROAD ARMY AREA TRICHY

Amount

Taking down cement plaster of any description on brick or stone walls and ceiling including racking out joints,hacking for key,scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick wall/concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L 5mm thick rendering on fair faces ceiling surfaces in cement mortar 1:3, and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 10mm thick as a backing coat in cement mortar 1:6,and finishing coat in cement mortar 1:4, 5mm thick using WPC compound @ 3% by weight of cement finished even and fair complete all as specified and directed. (Note:WPC Shall measured and paid in relevant item)

M&L Preparation of new plastered wall surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed .

M&L Preparation of old treated wall surface of any description over 10 cm girth or width not other wise described and applying one coat of cement base paint on wall surfaces complete all as specified and directed .

M&L Preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a priming coat using chalk whiting, complete all as specified and directed.

M&L Preparation of old treated wall surface and applying two coats of oil bound distemper over a priming coat using chalk whiting, on wall surfaces complete all as specified and directed .

M&L Applying three coats of white wash as in ceiling incl preparation of newly plastered surfaces complete all as specified and directed.

M&L Preparation of old treated surface applying one coats of white wash on ceiling complete all as specified and directed.

M&L Applying three coats of white wash as on walls incl preparation of newly plastered surfaces complete all as specified and directed.

M&L Preparation of old treated wall surface applying one coat of white wash on walls complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing) removing rubbish off the premises complete all as specified and directed.

M&L Coloured non skid ceramic tiles 7 to 8mm thick (square / rectangular)area of each tile exceeding 0.06 sqm but n.exc. 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15 mm thick screed bed or bedding layer for laying floor tiles in cement mortar 1:6 complete all as specified and directed.

M&L Coloured ceramic tiles in vertical surface 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick cement plaster as backing coat in CM 1:4 complete all as specified and directed.

M&L 15mm thick waterproofing plaster in CM 1:3 using WPC @ 3% by weight of cement finished even and smooth without using extra cement as in sunken treatment complete all as specified and directed. (Note:WPC Shall measured and paid in relevant item)

M&L PCC (1:5:10), Type E2 using 40mm graded stone aggregate as in filling of sunken floor complete all as specified and directed.

Dismantling water tanks of capacity exc 250 & n.exc 500 litres and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position, 500 ltrs capacity complete all as specified and as directed.

S&F 20mm dia ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections,including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections,including cleaning for refixing or removal to store complete all as specified and directed.

Refixing 15 mm bore old steel tubing and connections in new or old position (walls, ceiling, floors etc) complete all as specified and directed.

Refixing 20 mm bore old steel tubing and connections in new or old position (walls, ceiling, floors etc) complete all as specified and directed.

S&F 15 mm bore galvanised steel tubing medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20 mm bore galvanised steel tubing medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 15mm bore bib taps of cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and as directed.

S&F Pillar taps, fancy type, 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F 15mm bore Stop/angle valves,fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed.

S&F Brass chromium plated shower rose of size 75 mm with swivel joints including shower arm 15mm size, 195mm long with bend of 45 degree with flange for fixing with 15mm dia pipe in repairs complete all as specified and directed.

S&F Stainless steel brass chromium plated towel rail, 20 mm dia D type, 60 mm long between flanges and fixed in repairs complete all as specified and directed.

S&F Grating doom 125 mm dia made of PTMT with waste hole ( minimum weight 40 gms) specified and complete all as specified and directed.

S&F Vitreous china Wash Hand Basin, white, flat back of size 600 x 480mm excluding taps, waste, chain and plug and porcelain stopper including 32mm down stand PVC waste pipe and brackets fixed in repairs complete all as specified and directed.

S&F 32 mm bore HDPE pipes of pressure rating 6 Kgf/cm2 including making thread for fixing with waste coupling complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts, of 450 mm length complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts,of 600 mm length complete all as specified and directed.

S&F PVC valveless, syphonic action type flushing cistern, low level, 10 litres capacity, white, with inlet, ball, valve, float and handle including brackets fixed in repair complete all as specified and as directed.

S&F Vitreous china wash down water closet, white, squatting pan pedetsal pattern of size 580x440mm with integral foot rest including making necessary connections to soil pipes and flushing cistern, fixed as in repairs complete all as specified and directed.

S&F Stainless steel sink over all size 495x420 mm and bowl size 410x330x160mm including 40mm dia waste pipe fitted over a pair of CI brackets fixed in repairs all as specified and as directed by the Engineer-in-Charge.

Supply only waste coupling for 32 mmdia of discharge pipe of PTMT (half or full threaded) minimumweight 32mm- 45gms ) complete all as specified and directed.

S&F waste coupling for 40 mmdia of discharge pipe of PTMT (half or full threaded) minimumweight 32mm- 45gms) complete all as specified and directed.

S&F PVC ( SWR) floor trap, 75mm bore outlet dia plain with grating including joining with solvent cement complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 75 mm thick plain cement concrete 1:3:6 mix, type C2 using 40mm graded stone agregate as in plinth protection complete all as specified and directed.

Taking down eaves gutters and waste water pipes (any size or pattern) , including all fittings , head, shoes, bends, swan necks etc, including removal to store complete all as specified and directed.

S&F PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bend any radius with access door suitable for 110mm bore pipes in repairs complete all as specified and directed.

S&F PVC (SWR) bend any radius with access door suitable for 75mm dia pipes in repairs complete all as specified and directed.

S&F PVC SWR branch piece single 'Y' equal or unequal 110mm bore with access door in repairs complete all as specified and directed.

S&F PVC SWR branch piece single 'Y' equal or unequal 75mm bore with access door in repairs complete all as specified and directed.

S&F PVC(SWR) Vent cowl suitable for 110mm dia vent pipe in repairs complete all as specified and directed.

Taking down chowkats/frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc. complete all as specified and directed.

Taking down shutters of any description exc. 1.0 sqm but not exc. 2.0 sqm each including builders hardware complete all as specified and directed.

M&L Second class Hard wood,plain solid straight chowkats and frames rebated on the solid, ,rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick 2nd class Hard wood framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener complete all as specified and directed.

S&F Factory made solid PVC molded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick molded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and directed.

S&F 18/19mm thick Preliminated particle boards interior grade, preliminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed in repairs complete all as specified and directed.

Extra over item of Prelaminated particle board for external teak wood lipping, 6mm thick, fixed with nails suitable for 18/19 mm thick complete all as specified and directed.

S&F Continous (piano)hinges mild steel,bright finish or electro galvanised width of flaps (when open)in mm 30mm as fixed in repairs complete all as specified and directed.

Cutting holes in brick walls/stone walls built in cement mortar or cement lime mortar n exc half brick for inserting holdfast etc complete all as specified and directed.

S&F mild steel flat iron as in holdfast and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples in repairs complete all as specified and directed.

S&F stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Sheet glass 4mm thick plain ordinary quality and glazing with oil putty/wooden beads as directed in squares n.exc 0.50 sqm each pane complete all as specified and directed.

Hacking out old broken glass exc 1.5 sqm ( any thickness, size, quality or description) from wooden frame frames, including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S&F Butt hinges, 75mm size medium weight cold rolled mild steel etc. complete all as specified and directed.

S&F Butt hinges, 100mm size medium weight cold rolled mild steel etc. complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 100mm length complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts, extruded section of size 200mm length complete all as specified and directed.

S&F Aluminium handles cast type anodised 100 mm size complete all as specified and directed.

S&F Aluminium handles cast type anodised 150 mm size complete all as specified and directed.

S&F Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, 140 mm over all length of cover plates , anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L Preparation of new wood surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L Preparation of old wood surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L Preparation of old steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L Chipping of loose concrete and broken plastering in chajjas ceiling, fins, fascias and applying one coat of rust remover of approved brand DR FIXIT PIDICRETE or other makes given in list of makes and applying one coat of approved concrete bonding agent against old and new plaster/concrete including rendering 20mm thick in cement mortar 1:4 in two coats i.e. each coat 10mm thick as in repairs of chajjas ceiling, fins etc.,complete all as specified and as directed. Note : Rate quoted deemed to inclusive cost of rust remover and concrete bonding agent.

Dismantling of existing roof treatment/stone slabs of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L 25 mm thick PCC type B0 1:2:4 using 12.5mm graded stone aggregate as in padding concrete using WPC as PIDI PRFOOF LW or other makes given in list of makes at the rate of 200ml per bag of cement complete all as specified and directed. Note: (Supply of WPC shall be measured and paid separately).

M&L Rendering 10mm thick in CM 1:4 with WPC over roof, finished fair and even complete all as specified and directed. Note: (Supply of WPC shall be measured and paid separately).

Supply only Liquid water proofing compound complete all as specified and directed.

M&L Roof tiles, Mangalore pattern, interlocking at side joints, bedded and jointed in cement mortar 1:4 complete all as specified and directed.

M&L Screed bed 20 mm thick CM 1:4 mixed with WPC complete all as specified and directed.

M Govindarajan

RELIANCE SALES AGENCY

ACK ENGINEERING AND CONSTRUCTION

TECKXPERT ENTERPRISES