Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.4 LAccepted-AOC 37110 INDUSTRIAL ESTATE KOPARGAON 423 601 | KOPARGAON | AHMEDNAGAR | MAHARASHTRA | 423601 | L1 | Accepted-AOC Contract Awarded being lowest bidder. | |
| 2 | L2₹5.5 L+₹17,470 (3.25%)Rejected-AOC 37 B SAHEB KRUPA SOC JIVAN CHETAN SCHOOL SAMA ROAD VADODARA GUJARAT PIN 390 008 | VADODARA | GUJARAT | 390008 | L2 | Rejected-AOC Rejected due to higher amount quoted. | |
| 3 | L3₹5.7 L+₹30,188 (5.62%)Rejected-AOC SUB PLOT NO 02 FP NO 24 BEHIND NUTUN VIDHYALAYA ON SAMA SAVLI ROAD SAMA VADODARA GUJARAT 390 024 | VADODARA | VADODARA | GUJARAT | 390024 | L3 | Rejected-AOC Rejected due to higher amount quoted. |
| Sl No | Description | Qty | Unit | Pratik Enterprise L2 | swastik industries L1 | shreekalyanwoodworks L3 |
|---|---|---|---|---|---|---|
| 1.00SCH 'A' PART-I (STEEL FURNITURE) | ||||||
| 1.01 | Almirah Large Steel With Shelves (FD-1031)
All as shown on drawing. Overall size shall be 920mm long, 485mm wide and 1985mm high base shall be made of 2 Nos mild steel channel based made in U Shape with ends covered.MS Sheet shall be 1mm thick. The base channel shell be welded 50mm from each end of the length of 920mm and shall be upto full width of 485mm and shall be 100 mm high, Tops, sides, back, bottom and front shall be 1 mm thick MS Sheet. Four shelves equally spaced of 1 mm thick MS sheet make five compartments. Handle:Superior quality mat finish stainless Steel handle of latest Godrej patten.Locking: Three way locking device, Godrej/Harrison. Paint: All exposed surfaces of steel shall be power coated in dark shade dual colour externally as approved. Internally in off white colour. Rest all as per drawing. | 20 | NOS | 10,900 ₹2,18,000 | 10,900 ₹2,18,000 | 10,896 ₹2,17,920 Lowest |
| 1.02 | Table Office Clerk Steel (FD-1004)
All shown on drawing.Over all size shall be 1200 mm long, 610 mm wide and 760 mm high steel frame of size shall be of 1160mm long, 570mm wide and 742mm high. Four legs of 25mm MS Tube 25mm square MS tube with wall thickness of 1.6 mm for legs table top - 18 mm thick pre-laminated particle board of dark coffe shade for top with Hot pressed PVC beading all around the top. Sheet - 1.00 mm thick MS sheet. All exposed surfaces of steel shall be powder coated in dark/lite shade as approved. Rest all as shown and specified in drg. | 5 | NOS | 6,490 ₹32,450 | 4,500 ₹22,500 Lowest | 5,960 ₹29,800 |
| 1.03 | Book Case Large Steel ( FD-1028)
All as shown drawing. Overall size shall be 840mm long, 310mm wide and 1675mm. All sheet shall be mild steel 1mm thick. Back , sides , bottom , top and shelves shall be of 1mm thick. The book case shall be provided with fur compartment of equally six. The shutters of each compartment shall open towards top and slide into depth of the book case. Two steel handles of 100mm long shall be provided to each shutter of the compartment. The locking device shall be provided to each compartment. All steel and iron surface exposed to view when placed in positing shall be given two coats of enamel paint over a coat of primer after preparation of surface. | 8 | NOS | 9,440 ₹75,520 | 8,000 ₹64,000 Lowest | 10,296 ₹82,368 |
| 1.04 | Foam With Back (FD-1027)
Overall size shall be 1800mm long 510mm wide and 900mm high. Frame at seat level shall be 300 mm wide and at bottom of legs level shall be 460mm wide. Rest all as per specifications mentioned in drg. Tube : 25 mm square MS tube with wall thickness of 1.6 mm for frame , legs & stiffeners etc.
Timber : 25mm thick 1 st class (HW) teak wood plank in one piece for black rest and bottom duly screwed with standard workmanship.
Paint : All exposed surfaces of steel shall be powder coated in Dark/Lite shade as approved.
Polish: Melamine polish of dark shade on teak wood surafaces through spray machine. Rest all as per Drgs. | 5 | NOS | 3,800 ₹19,000 Lowest | 4,500 ₹22,500 | 5,960 ₹29,800 |
| 1.05 | Charpoy With Hard Top (FD/MAP-II/01)
The overall size shall be as per drg. The frame work shall be made of CRCA box sections as under :-
(i) Long rails - 25 X 65 mm box section of 16 gauge.
(ii) Short rail - 25 X 65 mm box section of 16 gauge.
(iii) Legs - 32 X 32 mm box section o 16 gauge.
(iv) stiffeners for legs - 2 Nos., each of 25 x 25 mm box section of 16G thick.
(v) Stiffener between long rails - 2 Nos., each of 16 G thick.
Top shall be 12mm thick commercial gde BWR ply wood conforming to Is-303. MS plate of size 32 mm X 32 mm X 5 mm shall be welded under each leg and under the MS plate 3 mm thick rubber sheet shall be fixed with rubber based adhesive. Three No cleats of size 25mm X 60 mm X 6 mm shall be welded to each short rail to support the ply. All metal work shall be pretreated with epoxy polyster powder coating (Black) 70 microns by 7 tank process and oven dried with the following specifications:
(i) Dry film thickness more than 45 microns
(ii) Sit spray test to with stand more than 10:00 Hours
(iii) Adhesion as per DIN 53152 standards.
(iv) Pencil scratch hardness more than 2H.
Rest all as specified as per drawings Irrespective of what is shown in drawing, 35mm X 5mm flat iron mild steel bend to right angle as directed shall be provided on four corners charpoy MNF set shall be of 19 mm square tube of wall thickness 1.6 mm & shall be provided in 'T' shape. The top horizontal length shall be of 900 mm.The vertical height shall be of 1480 mm joined in middle of horizontal by welding. The ends shall be plugged with 1.2mm thick mild steel sheet and welded as directed. Two key holes shall be provided in verticle of MNF set for fixing in head and foot boards. Two Nos 15mm X 3 mm and 80mm long flat iron of mild steel bend to shape shall be provided for holding when not in use. | 50 | NOS | 4,190 ₹2,09,500 | 4,200 ₹2,10,000 | 4,146 ₹2,07,300 Lowest |
Tender Value
₹6 L
EMD Value
₹12,000
Closing Date
7 Jul 2025, 6:00 pmClosed
CWE AHMEDABAD
CWE AHMEDABAD
SPECIAL REPAIRS/REPLACEMENT/RENEWAL OF FURNITURE AGAINST BER FURNITURE OF EME SCHOOL VADODARA
2025_MES_713264_1
87392/E8
Open Tender
Civil Works
Item Rate
120 days
ARMY AREA BARODA
AS PER TENDER DOCUMENT
6 documents required · 6 mandatory
₹500
GE (A) BARODA
₹12,000
Yes
13 Aug 2025
9 Jun 2025
15 Jul 2025
9 Jun 2025
7 Jul 2025
24 Jun 2025
9 Jun 2025 - 23 Jun 2025
Amount
SCH 'A' PART-I (STEEL FURNITURE)
Almirah Large Steel With Shelves (FD-1031) All as shown on drawing. Overall size shall be 920mm long, 485mm wide and 1985mm high base shall be made of 2 Nos mild steel channel based made in U Shape with ends covered.MS Sheet shall be 1mm thick. The base channel shell be welded 50mm from each end of the length of 920mm and shall be upto full width of 485mm and shall be 100 mm high, Tops, sides, back, bottom and front shall be 1 mm thick MS Sheet. Four shelves equally spaced of 1 mm thick MS sheet make five compartments. Handle:Superior quality mat finish stainless Steel handle of latest Godrej patten.Locking: Three way locking device, Godrej/Harrison. Paint: All exposed surfaces of steel shall be power coated in dark shade dual colour externally as approved. Internally in off white colour. Rest all as per drawing.
Table Office Clerk Steel (FD-1004) All shown on drawing.Over all size shall be 1200 mm long, 610 mm wide and 760 mm high steel frame of size shall be of 1160mm long, 570mm wide and 742mm high. Four legs of 25mm MS Tube 25mm square MS tube with wall thickness of 1.6 mm for legs table top - 18 mm thick pre-laminated particle board of dark coffe shade for top with Hot pressed PVC beading all around the top. Sheet - 1.00 mm thick MS sheet. All exposed surfaces of steel shall be powder coated in dark/lite shade as approved. Rest all as shown and specified in drg.
Book Case Large Steel ( FD-1028) All as shown drawing. Overall size shall be 840mm long, 310mm wide and 1675mm. All sheet shall be mild steel 1mm thick. Back , sides , bottom , top and shelves shall be of 1mm thick. The book case shall be provided with fur compartment of equally six. The shutters of each compartment shall open towards top and slide into depth of the book case. Two steel handles of 100mm long shall be provided to each shutter of the compartment. The locking device shall be provided to each compartment. All steel and iron surface exposed to view when placed in positing shall be given two coats of enamel paint over a coat of primer after preparation of surface.
Foam With Back (FD-1027) Overall size shall be 1800mm long 510mm wide and 900mm high. Frame at seat level shall be 300 mm wide and at bottom of legs level shall be 460mm wide. Rest all as per specifications mentioned in drg. Tube : 25 mm square MS tube with wall thickness of 1.6 mm for frame , legs & stiffeners etc. Timber : 25mm thick 1 st class (HW) teak wood plank in one piece for black rest and bottom duly screwed with standard workmanship. Paint : All exposed surfaces of steel shall be powder coated in Dark/Lite shade as approved. Polish: Melamine polish of dark shade on teak wood surafaces through spray machine. Rest all as per Drgs.
Charpoy With Hard Top (FD/MAP-II/01) The overall size shall be as per drg. The frame work shall be made of CRCA box sections as under :- (i) Long rails - 25 X 65 mm box section of 16 gauge. (ii) Short rail - 25 X 65 mm box section of 16 gauge. (iii) Legs - 32 X 32 mm box section o 16 gauge. (iv) stiffeners for legs - 2 Nos., each of 25 x 25 mm box section of 16G thick. (v) Stiffener between long rails - 2 Nos., each of 16 G thick. Top shall be 12mm thick commercial gde BWR ply wood conforming to Is-303. MS plate of size 32 mm X 32 mm X 5 mm shall be welded under each leg and under the MS plate 3 mm thick rubber sheet shall be fixed with rubber based adhesive. Three No cleats of size 25mm X 60 mm X 6 mm shall be welded to each short rail to support the ply. All metal work shall be pretreated with epoxy polyster powder coating (Black) 70 microns by 7 tank process and oven dried with the following specifications: (i) Dry film thickness more than 45 microns (ii) Sit spray test to with stand more than 10:00 Hours (iii) Adhesion as per DIN 53152 standards. (iv) Pencil scratch hardness more than 2H. Rest all as specified as per drawings Irrespective of what is shown in drawing, 35mm X 5mm flat iron mild steel bend to right angle as directed shall be provided on four corners charpoy MNF set shall be of 19 mm square tube of wall thickness 1.6 mm & shall be provided in 'T' shape. The top horizontal length shall be of 900 mm.The vertical height shall be of 1480 mm joined in middle of horizontal by welding. The ends shall be plugged with 1.2mm thick mild steel sheet and welded as directed. Two key holes shall be provided in verticle of MNF set for fixing in head and foot boards. Two Nos 15mm X 3 mm and 80mm long flat iron of mild steel bend to shape shall be provided for holding when not in use.
Pratik Enterprise (BID ID -3341160)
shreekalyanwoodworks (BID ID -3348876)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .