Comprehensive Repairing of Industrial Food Canteen, Dispensary, all section Office Building/godown/ toilet, Sub-station buildings, Pump houses having flat roof of buildings (Except Admin,Admin Annex building and PV building) inside MSF, Ishapore.

Amount

DISMANTLING :- Textile coverings including frames (if any) and cover fillets (measured flat and not girthed).The debris to be deposited n exc 100m as directed by the EIC.

CHIPPING & CUTTING GROOVE:Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

CHIPPING & CUTTING GROOVE:Fair Straight or Circular raking cutting n exc 10 cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc. including rubbed finish and waste

REMOVAL OF SPOIL : Removing building materials etc. to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination. For Aggregate(600cum ÷0.62 cum)= 967.71 Load Say 968 Load

P.C.C.:Providing PCC in ratio type-B0, 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, round or chamfered on edges, using coarse sand and approved quality cement as per specifications. The rates include for use of formwork (straight or curved). Incorporating integral water proofing compound in the manner specified by the manufacturer and in the proportions indicated.Complete in all respect as directed by EIC.

P.C.C.: Supply of Liquid water proofing compound Requirement- 350ml per cum. (Material only)

P.CC.:Finishing cement concrete surface even and smooth using extra cement. M & L

PLASTERING :Taking down plaster built in cement lime or cement mortar of any description. on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.,

PLASTERING :Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.Ordinary cement finish using ordinary cement.

PLASTERING :Rendering/ Plastering 12mm thick with Cement Morter 1:4 on fair faces of brick work or concrete surfaces The rates include for finishing the surface fair and even.

SCAFFOLDING : Providing & fixing double scaffolding system on exterior side building upto 5 m height above ground level including additional rows of scaffolding stepped manner as per requirement of site.

Repairing of Doors & Windows:Supplying Only, Timber 2nd class hardwood (Gamari or equivalent) in clean sawn battens or fillets for repairing of Chowkhats or frames

Repairing of Doors & Windows:Supplying Only, Timber 2nd class hardwood (Gamari or equivalent), clean sawn boards or planks, width n exc. 25 cm THICKNESS 25mm

Repairing of Doors & Windows:labour in fixing or taking down and refixing in same opening, together with all accessory materials such as nails, screws, wedges, plugs, glue, putty, etc. and also for plugging up old screw holes, etc., and for painting one coat on edges of shutters of doors, windows, etc. eased or fitted. Chowkhats or frames with shutters (without taking off shutters from the frame) size exc 1.5 sq. m but n exc 4 sq. m each

Repairing of Doors & Windows:Shutters of any description 'refixing' in same opening includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. Renewal of builder's hardware articles,exc 1 sq. m and n exc 2 sq. m each

Repairing of Doors & Windows:Taking down and refixing in same opening only Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

Repairing of Doors & Windows:Supply only Mild steel in flat, round or square bars, z channel, in available lengths conforming to Fe 410-W (Gde-E- 250) quality- A for repairing of windows.

Repairing of Doors & Windows:Welding in repairs for Thickness of Metal to be welded Exc. 6mm but n.exc 9mm and exc 2.5cm but n exc 5cm in length

Repairing of Doors & Windows:Butt hinges 100mm long, medium weight, cold rolled mild steel, and fixed

Repairing of Doors & Windows:Mild steel barrel tower bolts 200 mm long, stove enamelled black, with bright bolt and fixed

Repairing of Doors & Windows: Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed in repairs

Repairing of Doors & Windows:Supply & fixing in repair cast iron or maleable cast iron handles 150mm long, oval type, stove enamelled black

MS Framework for Stair:Supplying & fixing MS frame work confirming to Fe 410 -W (Gde- E- 250) quality- A in Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up drilling the members for site connections; and fixing complete. including painting with one shop coat of zinc chromate primer paint (including preparation of surface) at contractor’s workshop before fabrication

MS Framework for Stair:Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

MS Framework for Stair:Excavating over areas, n. exc 1.5 m deep and getting out in hard /dense soil.

MS Framework for Stair:RCC type B-1 1:2:4 , 20mm graded aggregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

CUTTING HOLES : Cutting holes of Superficial area Exc. 150 sq. cm but n exc 400 sq. cm into or through brick walls, stone walls built in cement mortar or cement lime mortar and walls of cement concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required

RAIN WATER PIPE :Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

RAIN WATER PIPE :Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Complete in all respect. 160mm dia PVC pipe

RAIN WATER PIPE :Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Complete in all respect. 160 mm dia PVC bend

PAINTING:Distemper: Preparation of surface by Washing, rubbing down and stopping of distempered and painted surfaces. One coat Cement wash with Portland cement slurry to a smooth bodied opaque finish on newly plastered surface Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coat

SAMRAT ENTERPRISE (BID ID -857700)