Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.9 LAccepted-AOC 36A 60 CIVIL LINE TELIYAR GANJ ALLAHABAD UTTAR PRADESH 211004 | PRAYAGRAJ | UTTAR PRADESH | 211004 | L1 | Accepted-AOC Acceptance of Contract | |
| 2 | L2₹40.9 L+₹2.0 L (5.14%)Rejected-AOC | L2 | Rejected-AOC OK | |
| 3 | L3₹42.4 L+₹3.5 L (9.08%)Rejected-AOC 27 CHITRAKOOT ENCLAVE NEAR ANURAG NURSARY DEHRADUN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Rejected-AOC OK | |
| 4 | L4₹45.0 L+₹6.2 L (15.9%)Rejected-AOC 11 CIVIL LINES ROORKEE 247667 DISTT HARDWAR UK | HARIDWAR | UTTARAKHAND | 247667 | L4 | Rejected-AOC OK | |
| 5 | L5₹45.5 L+₹6.6 L (16.9%)Rejected-AOC 3 VIJAY PARK CHAKRATA ROAD DEHRADUN 248 001 UK | DEHRADUN | UTTARAKHAND | 248001 | L5 | Rejected-AOC OK |
Tender Value
₹43.3 L
EMD Value
₹86,600
Closing Date
15 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
PROVN OF CERTAIN REVENUE AND MINOR WORK AT IMA DEHRADUN
2024_MES_655894_1
GE/IMA/T-47 of 2024-2025 9437/E8
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE IMA Dehradun
Refer NIT
6 documents required · 6 mandatory
₹500
Yes
GE IMA Dehradun
₹86,600
Yes
3 Sept 2024
25 May 2024
17 Jun 2024
26 May 2024
15 Jun 2024
8 Jun 2024
Amount
Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m deep in soft/loose soil includng removal out side IMA premises complete all as specified.
M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggt) as in foundation filling, mass concrete and sub base of floor etc complete all as specified.
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified.
M&L for Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
M&L for 40mm thick Damp proof course horizontal surfaces incl necessary form work in PCC 1 : 2 : 4 type B-O (using 12.5mm graded crushed stone aggregate).
S&F Pre- painted green colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed .
S&F Pre-painted green colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, ridges, etc. cut to required size edges beaded if directed, holes punched including round headed screws, self tapping screws, clout nails or rivets and fixed to wood or steel members with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. complete all as specified & directed.
S&F MS angle/Tee/Hollow tublar section as in column, main or cross beams, hip and jack rafter, purlins, roof trusses (framed) where connected to common rafters and etc conforming to Fe-290 Gde E-165 all as directed by Engr-in-charge. Make:- Tata steel, JSW steel, Appolo steel.
S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 , mixed with WPC as per manufacturer instructions finished fair and even as directed. ( water proofing compound shall be measured and Paid separately).
M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished fair and even without using extra cement.
Supply only Liquid water proofing compound
M&L Glazed ceramic coloured tiles of size 450 x 300 x 06 to 07 mm, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured tile grout to match the shade of tiles over and including 10 mm thick rendering in cement mortar (1:4) finished rough surface to receive tiles complete all as directed.
M&L Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as directed.
S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .
S& F Factory made single extruded WPC (Wood Polymer Composite) solid Molded flush door shutter both side laminated of 24mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately
S&F steel ventilators with top hung shutter incliding hinges , steel peg stay, complete all as specified.
S&F Stainless steel Butt hinges, 100mm long, medium weight, complete all as directed.
S&F 150mm long aluminium anodized handle cast type complete all as directed.
S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.
M&L for hard core of broken stone gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15Cm thick watered and well rammed to a true surface.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone agg) used as sub floor as directed.
M & L for 75mm th PCC 1:3:6 type C-2(using 40mm graded crushed stone agg) as in plinth protection and paving, finished even and fair complete all as specified.
M&L for 300x300x25mm thick (M-35) glossy finish polished red color Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile completel as specified and directed. Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula.
Returning filling in, including spreading, leveling and watering, well ramming n.exc 25cm layer complete all as specified.
Removal of surplus soil out side IMA premises and depositing where directed at a level n. exc 1.5 meter above the starting point.
M & L for figured glass, pin head type, 4mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified.
S&F Bib Taps, cast copper alloy, fancy type, chromium plated, long body with capstan head, screwed down, screwed for 15mm bore GI pipe or brass ferrule or to GI socket complete all as specified and directed. Make:- Cera (Victor series), Jaquar, Kohler
S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed
S&F 20 mm bore ball brass valves, high pressure with polyethene float and fly nut complete screwed for iron pipe or brass ferrule and fixed.Make:- Cera, Prayag, Polytuff.
S & F CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges. Make:- Cera, Prayag, Jaquar
S & F Brass chromium plated shower rose 125mm size Make:- Cera, Prayag, Jaquar
S&F Shelf of PTMT fixed with and icluding CP brass screws and wooden or plastic cleats, all as directed.
S&F Aluminium hat pegs, solid body, 125mm to 175mm fixed with screws all as directed.
S&F 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipes or for unions and fixed. Make:- Zoloto, Kirlosker, Leader.
S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore including GI fittings (ISI marked)
S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.
S&F 75mm dia PVC(SWR) pipe laid in trenches or fixed to wall etc. complete all as specified and directed.
S&F PVC (SWR) bends 75mm dia.
S&F 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.
S&F PVC branch pieces single ordinary or inverted or with parallel branches 110mm dia fitted with oval access doors fixed in repair complete all as specified and directed.
S&F PVC bends fitted with oval access doors 110 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.
S&F PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.
S&F PVC branch pieces single ordinary or inverted or with parallel branches 75 mm dia fitted with oval access doors fixed in repair complete all as specified and directed.
S&F Chromium Plated fancy type Angle valve 15mm dia (angle cock) fixed in repair complete all as directed Make:- Cera (Victor series), Jaquar, Kohler.
S&F 15mm bore pillar cock Rocket type with areator fixed in repair complete all as directed Make:- Cera (Victor series), Jaquar, Kohler.
S&F PVC conections 15mm size with PTMT nuts of 600 mm long fixed in repair complete all as specified and directed.
S&F 15mm dia chromium plated concealed stop cock, heavy body with cap fixed in repair complete all as specified and directed. Make:- Cera (Victor series), Jaquar, Kohler.
S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white with ball valve float valve and handle incl bracket complete all as specified and directed. Make:- Cera, Parryware, Jaquar
S&F Vitreous china squatting pattern Orissa pattern water closet pan of size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.
M&L for Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed.
S & F Vitreous china wash basin, white, flat back, size 550x400mm including bracket,west cupling and west pipe complete all as directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified.
Preparation of new plastered surfaces and applying three coats of white wash on walls.
M&L for preparing new or previously untreated surface of wall and applying two coats of cement based paint over a coat of primer .
M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
S&F Salt-glazed stoneware drain pipes grade 'A' 150mm dia laid in trenches and jointed complete all as specified and directed.
S&F PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested suitable for 150mm bore of pipe complete all as specified and directed.
Construction of soakage well of size 1.8 M dia X 3.0 M deep, excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed and solid in M-25 concrete, including , brick work in CM 1:4, plaster where shown on drg shall be 12mm thick in CM 1:6, bearing plaster 15mm thick in CM 1:4, RCC cover slab In M-25, filling with brick bats of gauge 80 to 150mm including Demolition of existing old soakage well complete all as specified and shown in Drg TD-309 sheet 1/4 to 4/4.
Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15cm thickness(below or above ground level) including removal out side IMA premises.
Demolition of cement concrete (reinforced cut as required to facilitate demolition) such as culvert slab and the like etc in any position and of any description not otherwise specifically provided complete all as specified and directed.
Surface excavation n. Exc 30 Cm deep and averaging 15 cm deep and getting out in any type of soil.
M&L for Machine pressed precast glossy finished coloured concrete interlocking paver block with grey cement & pigment conforming to IS-15658-2006 of 80mm thickness, M-50 grade & including 25mm thick sand cushioning layer complete all as specified & directed. Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula.
M&L for Rubberised precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer complete, all as specified and directed.Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula.
M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in , coping and benching including necessary formwork and rounding/ Chamfered edges all complete as specified & directed.
S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0.
M&L for RCC1:2:4 (nominal mix) type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like complete all as specified and directed.
Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Brick work using sub class “B” bricks straight or curved on plan exc 6 metre mean radius built in cement mortar1:4 ( Old size brick) complete all as specified and directed.
M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on brick work finished even and smooth without using extra cement complete all as specified and directed.
M&L for 100 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor/hard standings and making impressions with spike rolling or expanded metal whilst the concrete is green, finishing exposed edges fair or rounding or chamfering of exposed edges also filling in uneven surfaces including necessary formwork complete all as specified and directed.
M&L for Precast RCC 1:2:4 Type B-1( using 20 mm graded crushed stone aggregate} as in cover slab, set and jointed in cement mortar 1:4 complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ)
S&F Mild steel TMT bars 6mm to 8mm dia bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Excavating in post holes in soft/ loose soil (or similar holes) each n exc 0.5 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.
M & L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregade ) in foundation for post holes.
S&F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as specified and directed.
S&F Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
S&F Butt hinges,125mm long heavy weight, cold rolled mild steel complete all as specified and directed.
S&F Welded steel wire fabric weight not exc 4 Kg/Sqm complete to wood or steel members complete all as specified and directed.
M & L for Machine cut kota stone slab flooring 18-20mm thick laid over 20mm thick cement sand screed cement mortar 1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.
Cutting and grinding of existing Granite/kota stone floor surface(2cut) on horizontal and vertical surface and finally finishing the surfaces uniformally by applying floor polish complete all as specified and directed by Engr-in-Charge.
S&F 300mm long Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as directed.
M&L for preparing new or previously untreated surface of wall and applying two coats of cement based paint over a coat of primer complete all as specified.
Excavation of over areas n exc 1.5m deep and getting out in any type of soil complete all as specified.
M&L for RCC (nominal mix) 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in foundations, including rafts, footings, plinth beams etc.
Formwork to sides of concrete foundations, footings, base of columns, footings, plinth beams and similar work vertical or to batter, rough finished surface of concrete.
M&L for precast RCC louvers and jallies 35mm thick type B0 (1:2:4) set in cement mortar (1:4) complete all as specified.
Add od deduct for each 25mm girth or part thereof over or under 30 cm.
M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone agg) as in floor and finished fair & even complete all as specified & directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone agg) as in sub base complete finished fair & even all as specified & directed.
S&F Modular point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in nincluding non rigid PVC Conduit concealed in wall with all fitting not less than 25 mm dia and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box of required size factory made for mounting Modular switch, regulators etc with and including Modular cover and frame , ISI marked, for the following. Make of wire: Havells/Grandlay/SCI/Anchor. Make of conduit: Finolex/Bhagwati plastic/AKG
One light point controlled by one, one way switch 5 Amps
One exhaust fan point controlled by one, one way switch 5 Amps
Supply and fix modular switch 1 way 6A, 1 Module. Make:Havells ORO(White)/Legrand Lyncus/Indoasian(Glint)
Supply & fix Ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed.Make: Anchor/Crabtree/Ess Ess Kay
S & F sub main wiring with 2 run PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in existing Concealed conduit including one run PVC insulated unsheathed cable with multi stranded copper conductor as a earth continuity and connected upto DB of following sizes complete all as specified and directed. Note:Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. Make of wire: Havells/Polycab/Grandlay/ SCI
2 x 4 + 1 x 4 Sqmm
S & F Surface and wall mounted LED PC batten fitting 20 Watt 230 volts AC, not less than 100 lumens / watt, cool white,integrated electronic driver complete.Make: Crompton Cat pt no.TRIM LINEA NEU CCS-102-20-65-SL-DP-NWH or equivalent in Havells/Philips
S & F Surface and wall mounted LED PC batten fitting 10 Watt 230 volts AC, not less than 100 lumens / watt, cool white,integrated electronic driver complete.Make: Crompton Cat pt no. TRIM LINEA NEU CCS-102-10-65-SL-DP-NWH or equivalent in Havells/Philips
S & F bulkhead fitting 10 Watt 230 volts AC, with integrated electronic driver complete.Make: Crompton Cat pt no. STUD LBHP-10-CDL or equivalent in Havells/Philips
S&F Water heater storage type,electric,capacity 25 litres 4 star BEE rating high grade stainless steel tank, powder coated metal body, tank designed to withstand 6 bar pressure including PUF isulation and multiple safety features complete all as specified and directed.Make: Bajaj Shakti plus Cat pt no. 150753 or equivalent in Havells/Crompton
Supply and Fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volts complete. Make:- Anchor, Indo Asian, Havells.
S&F MCB SPN DB 4 way, degree of protection IP 30, mechanical impact strength IK 08, attractive white shade matt finish having detachable gland plate suitable for surface mounting suitable for fixing MCBs complete all as specified and directed by Engr-In-Charge. Make: Indoasian Cat pt no. 810505 or equivalent in HPL/Havells
S&F MCB SPN 'B' curve 25 Amp complete all as specified and directed by Engr-In-Charge. Make: Indoasian Cat Pt No. 810013 or equivalent in HPL/Havells
S&F MCB SP 'B' curve 20 Amp complete all as specified and directed by Engr-In-Charge. Make: Indoasian Cat Pt No. 810003 or equivalent in HPL/Havells
Supply and fix PVC body exhaust fan 250 mm sweep, 230 volts 50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, box type louvers etc complete all as specified and directed. Make: Havells/Crompton
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core complete all as specified and directed.Make: Havells/Polycab/Grandlay/SCI
Excavation in trenches in any type of soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. including removing cable protection covers/ bricks complete all as specified and directed. Notes : (i) Excavation shall be made carefully in order to avoid damage of existing cables and brick protection. (ii) The excavation work may be carried out in short lengths for locating fault in under ground cables at different locations.
Material & labour for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches/ducts for cable protection complete all as specified and directed.
M&L for old size sub class `B` bricks, kiln burnt, as in cable protection laid flat with axis of brick perpendicular to the axis of the cable complete all as specified and directed .
Supplying, laying & jointing GI water tubing, 25 mm bore, medium grade as in sleeving etc laid in trenches/fixed to walls etc. complete all as specified and directed by Engineer-in-Charge.
M/s RAM RATAN AND SONS
M/S PUNDIR BUILDERS
Alankar Traders
M/S RAJESH KUMAR GOYAL
M/s Vinod Singh Negi
KRISHANA ELECTRIC WORKS
Aggrawal Builders and Furnishers
Meher enterprises
M/s RK ENTERPRISES
M/S S P BUILDERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .