Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.6 LAccepted-Finance | L1 | Accepted-Finance Being L1 | |
| 2 | L2₹14.1 L+₹54,822 (4.04%)Accepted-Finance D NO 71 31 950 CHINTALALOVA GANDHIGRAM POST VISAKHAPATNAM 530005 | VISAKHAPATANAM | ANDHRA PRADESH | 530005 | L2 | Accepted-Finance Being not L1 | |
| 3 | L3₹15.5 L+₹1.9 L (14.1%)Accepted-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | NTR | ANDHRA PRADESH | 520001 | L3 | Accepted-Finance Being not L1 | |
| 4 | L4₹17.2 L+₹3.6 L (26.7%)Accepted-Finance | L4 | Accepted-Finance Being not L1 | |
| 5 | Rejected-Technical | - | Rejected-Technical Rejected being two contracts of the firm were cancelled. |
Tender Value
₹25.9 L
EMD Value
₹51,740
Closing Date
23 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) DM Visakhapatnam
GE (I) DM Visakhapatnam
REPAIR/MAINTENANCE TO SEWAGE DISPOSAL INCLUDING GULLY TRAPS, MAN HOLES, SEPTIC TANKS, FILTER BED ETC AND CONNECTED WORKS TO THE BUILDINGS LOCATED IN AREA C AT NAVAL DOCKYARD VISAKHAPATNAM UDER GE(I) DM VISAKHAPATNAM
2024_MES_647859_1
8963/E8
Open Tender
Civil Works
Item Rate
270 days
Naval Dockyard Visakhapatnam
As per tender documents
8 documents required · 8 mandatory
₹500
GE (I) DM Visakhapatnam
₹51,740
Yes
18 Jun 2024
26 Mar 2024
25 Apr 2024
26 Mar 2024
23 Apr 2024
9 Apr 2024
Amount
Demolition of plain cement concrete in ground floors and paving not exc 15 cm thick but above ground floors or highly elevated and removing the debris from Dockyard premises complete all as specified and directed.
M&L for PCC 1:3:6, type C2, (using 40mm graded stone aggregate) as in mass concrete finished even and smooth without using extra cement complete all as specified and directed.
Demolition of brick masonry built in cement mortar including all quoins, pillars etc and removing the debries from the Dockyard premises complete all as specified and directed.
M&L pre-cast cement concrete block masonary in PCC 1:3:6 type C1 using 20mm graded aggregate with solid block, exceeding 10cm in width setting in CM 1:4 complete all as specified and directed.
M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.
Excavation in trenches, not exc 1.5m wide and not exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.
Demolition and breaking up drain pipes 100mm bore (salt glazed stone ware, AC or reinforced concrete type) set in cement mortar including haunching and benching complete all as specified and directed.
Demolition and breaking up drain pipes 150mm bore (salt glazed stone ware, AC or reinforced concrete type) set in cement mortar including haunching and benching complete all as specified and directed.
Demolition and breaking up drain pipes 200mm bore (salt glazed stone ware, AC or reinforced concrete type) set in cement mortar including haunching and benching complete all as specified and directed.
M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate), concrete bed to 100 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate), concrete bed to 150 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate), concrete bed to 200 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L Salt-Glazed stone ware drain pipes, 100mm dia (internal dia) laid in trenches and jointed as specified complete all as specified and directed.
M & L Salt-Glazed stone ware drain pipes, 150mm dia (internal dia) laid in trenches and jointed as specified complete all as specified and directed.
M & L Salt-Glazed stone ware drain pipes, 200mm dia (internal dia) laid in trenches and jointed as specified complete all as specified and directed.
Returning filling in including spreading, leveling watering and well ramming in layers not exc 25 cm complete all as specified and directed.
M&L for cutting of existing 100mm dia manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching required complete all as specified and directed.
M&L for cutting of existing 150mm dia manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching required complete all as specified and directed.
M&L for cutting of existing 200mm dia manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching required complete all as specified and directed.
M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate), in foundation beds of man-holes complete all as specified and directed.
Demolition of reinforced cement concrete as in manhole covers complete all as specified and directed.
M&L for PCC 1:2:4, type B1, (using 20mm graded stone aggregates) for Coping, lintel bands etc complete all as specified and directed.
M&L for precast cement Concrete 1:2:4, type B1, (using 20mm graded stone aggregate), in landing, cover slabes (for manhole) chajjas and similar articles including chamfers weathering, throating etc and setting in mortar complete with joints to match complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over , cut to length and bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for cement concrete type B2, 1:2:4 (40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.
M&L for cleaning the blockage in the sewage lines/man holes etc., n exc 1.0M deep including removing of debris, sludges, deposit etc, from the Dockyard premises including removing and refixing the cover slab of any type complete all as specified and directed.
M&L for cleaning the blockage in the sewage lines/man holes etc., exc 1.0Mtr & not exc 1.50 Mtr deep including re moving of debris, sludges, deposit etc, from the Dockyard premises including removing and refixing the cover slab of any type complete all as specified and directed.
M&L for cleaning the blockage in the sewage lines/man holes ,etc exc 1.50Mtr & not exc 2.0Mtr deep including removing of debris, sludges, deposit etc, from the Dockyard premises including removing and refixing the cover slab of any type complete all as specified and directed.
Cleaning of chocked gulley traps of any size, shape and depth etc including removing sludge/ debris etc to distance exceeding 100m and not exceeding 250m complete all as specified and directed.
S&F for salt glazed stoneware gully traps (size 180X150) square or round mouthed type 'P' complete all as specified and directed.
Dewatering / desludging of septic tanks,soakage wells etc, cleaning of all sludge ,silt residue of both orgenic and inorgnic nature by manual labour or by mechanical scrappers etc and disposal off the same out side the Dockyard area and including dumping the material to any depth, complete all as specified and directed.
Demolition of cement concrete of any description (in sunken floors) and in any position and removal of debris from Dockyard premises complete all as specified and directed.
M&L for rendering 10 mm thick in CM (1:4) on concrete or brick surfaces in sunken portions mixed with WPC as per manufacturers instructions all as specified and as directed. Note :- WPC shall be measured and paid separately.
Supply only integral water proofing compound all as specified and directed.
M&L applying evenly a coat or blown type bitumen @ 1.5 kg/Sqm and blinding with clean dry sand @ 0.05 cum/Sqm complete all as specified and directed.
M&L polythene 5- micron thick laid on a coat of bitumen primer @ 0.30 to 0.50 kg/Sqm complete all as specified and directed.
M/L for cement concrete 1:5:10 type E2 using 40 mm graded stone aggregate as in filling in sunken floors complete all as specified and directed.
M&L for 50mm thick cement concrete type 'B-0' 1:2:4 using 12.5mm graded stone aggregate as in flooring complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing)and rubbish off the premises complete all as specified and directed.
M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including screed bed in CM 1:6 , 15mm thick complete all as specified and directed.
M&L for coloured glazed ceramic tiles 450 x 300 x 7 mm thick in dado set and jointed in neat cement slurry and pointed in coloured cement to match fixed over incl redering in CM 1:4, 10mm thick complete all as specified and directed.
S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe incl taking out the existig unserviceable pedestal pan complete all as specified and directed.
S&F in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F in repairs PVC (SWR) bend 75 mm bore pipe complete all as specified and directed.
S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F in repairs PVC (SWR) bend 110 mm bore pipe complete all as specified and directed.
M&L for cleaning closed drain, n exc 0.50m deep including removing of debris, sludges, deposit etc, the Dockyard premises including removing and refixing the cover slab complete all as specified and directed.
All as per Item No.47.00 above, exc 0.50M deep but not exc 1.00M complete all as specified and directed.
All as per Item No. 47.00 above, exc 1.00M deep but not exc 1.50M complete all as specified and directed.
ESWARA ENGINEERING CONSTRUCTIONS
sai ganesh enterprises
SRK PROFESSIONAL ENGINEERING
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .