Electrification and Allied Works for Renovation of Govt Institute of Hotel Management Patel Nagar Dehradun

Amount

Wiring for light point/Ceiling/Wall fan point /exhaust fan/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with modular switch modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required.

Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with 2 way modular switch modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor, Single core cable in surface/ recessed PVC conduit as required

2x 2.5 sqmm+ 1x 2.5 sqmm earth wire

2x 6 sqmm+ 1x 6 sqmm earth wire

2x 10 sqmm+ 1x 6 sqmm earth wire

4x 4 sqmm+ 2x 4 sqmm earth wire

4x 6 sqmm+ 2x 6 sqmm earth wire

4x 10 sqmm+ 2x 6 sqmm earth wire

4x 16 sqmm+ 2x 6 sqmm earth wire

Telephone wiring in existing conduiting: Supply & drawing following pair, 0.5 sq.mm FRLS PVC insulated copper conductor, unarmoured telephone cable in existing surface/ recessed steel/ PVC conduit as required.

Supply & fixing of following sizes of PVC conduit along with accessories in surface / recessed including cutting the wall & making good the same in case of recessed conduit as required, for conduiting in Flat and from flat to LV shaft

20 mm dia.

25 mm dia.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Telephone socket outlet

Supplying and fixing two module of Stepped type electronic fan regulator on the existing modular plate & switch box including connections but excluding modular plate etc. as reqd.

Supplying and fixing of modular Blanking plate on the existing modular plate & switch box including connections but excluding modular plate etc. as reqd.

Supply and fixing of following size/ modules, GI box along with modular base & cover plate for modular switch/ regulator in recess, including connection as required.

1or 2 module (75mmx 75mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 Amp modular socket outlet and 5/6 A modular type switch(both with switch board and seprate from switch board), connections painting etc. as reqd, for Light plug point.(For light plugs to be used in non residential buildings.)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 & 5/6 Amp modular socket outlet and 15/16 A modular type switch, connections painting etc. as reqd. (for power sockets)

Installation, testing & commissioning of pre-wired, fluorescent fitting / compact fluoroscent fitting of all type, complete with all accessories & tubes etc. directly on ceiling / wall, including connection with 1.5 sq.mm. FRls PVC insulated, copper condutor, single core cable and earthing etc. as required.

Installation, testing & commissioning of ceiling fan including wiring the down rods of standard length ( upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as reqd.

Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.

Installation of Exhaust/Wall fan in the existing opening , including making the hole to suit the size of the above fan, making good the damage connection, testing commissioning etc. as required.

Upto 450 mm sweep

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable

Supplying and Installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5% in convinient sections,jointed with connectors, suspended from the ceiling with M.S suspenders including bolts and nuts, painting suspenders etc as required.

100 mm width x 50 mm depth x 1.6 mm thickness

150 mm width x 50 mm depth x 1.6 mm thickness

225 mm width x 50 mm depth x 1.6 mm thickness

Supplying and Installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5% in convinient sections,jointed with connectors, suspended from the ceiling with M.S suspenders including bolts and nuts, painting suspenders etc as required.

100 mm width x 50 mm depth x 1.6 mm thickness

150 mm width x 50 mm depth x 1.6 mm thickness

225mm width x 50 mm depth x 1.6 mm thickness

Supplying and Installing following size of perforated pre-painted M.S. cable trays reducers with perforation not more than 17.5% in convinient sections,jointed with connectors, suspended from the ceiling with M.S suspenders including bolts and nuts, painting suspenders etc as required.

100 mm width x 50 mm depth x 1.6 mm thickness

150 mm width x 50 mm depth x 1.6 mm thickness

225 mm width x 50 mm depth x 1.6 mm thickness

Supplying and Installing following size of perforated pre-painted M.S. cable trays tees with perforation not more than 17.5% in convinient sections,jointed with connectors, suspended from the ceiling with M.S suspenders including bolts and nuts, painting suspenders etc as required.

100 mm width x 50 mm depth x 1.6 mm thickness

150 mm width x 50 mm depth x 1.6 mm thickness

225 mm width x 50 mm depth x 1.6 mm thickness

Supplying and Installing following size of perforated pre-painted M.S. cable trays cross members with perforation not more than 17.5% in convinient sections,jointed with connectors, suspended from the ceiling with M.S suspenders including bolts and nuts, painting suspenders etc as required.

100 mm width x 50 mm depth x 1.6 mm thickness

150 mm width x 50 mm depth x 1.6 mm thickness

225 mm width x 50 mm depth x 1.6 mm thickness

Supplying & Fixing 20 amps,240 volts,SPN industrial type Socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface and recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.

TV cable in existing conduiting: Supply & drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of modular TV antenna socket outlet on the existing Modular plate & switch including connection but excluding modular plate etc. as required.

Supply & fixing of following sizes of PVC conduit along with accessories in surface / recessed including cutting the wall & making good the same in case of recessed conduit as required, for conduiting in Flat and from flat to LV shaft

20 mm dia.

Supply & fixing of Call bell/ Buzzer suitable for A.C. single phase, 230 volts complete as required

Providing & fixing of M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

6 Way(4+18), Double door

8 Way(4+24), Double door

Supplying & fixing 5 amps to 32 amps rating 240 volts C curve, Miniature Circuit Breaker osuitable for lighting loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying & Fixing of following rating four pole (three phase and neutral) 415 volts, Residual Current Circuit Breaker (RCCB), having a sensitivity current upto 300 milli-amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Laying and fixing one Number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Above 35 Sw. mm and Upto 95 Sq. mm

Supplying & making of end terminations with brass compression gland and Al. lugs for following sizes of PVC insulated and PVC sheathed/ XLPE Al. conductor cable of 1.1 KV grade as required.

3.5 x 95 sq.mm.

Earthing with G.I. earth Plate 600mm x 600mm x 6mm thick including accesssories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtrs long etc . ( with charcoal or coke and salt ) as required.

Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick including accesssories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtrs long etc. ( with charcoal or coke and salt ) as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 4mm dia Cu. wire on surface or in recess for loop earthing as required.

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/3529 i/c including welding, fitting like elbows,tee, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: .

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 ( Type-A) with blank Gunmetal/Stainless steel Cap and chain as required:

Single headed Gunmetal

Supply, fixing, testing and commission of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required:

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Providing installation, testing and commissioning of non return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nut, washers etc.as required.

100 mm dia

Providing, installation, testingand commissioning of stainless steel Y-strainer fabricated out of 1.6mm thick stainless steel, Grade 304, sheet with 3mm dia hole with stainless steel flange.

150 mm dia

Supplying and fixing 63mm dia, 15 m RRL hose pipe with 63mm dia male and female coupling duly bound with GI wire, riverts etc. conforming to IS 636 (type-A) as required

Gunmetal

Supplying and fixing first-aid hose reel with MS construction spray painting in post office red, conforming to IS 884 complete with following as required.

20mm nominal internal dia water hose thermoplastic (textile reinforced) type- 2 as per IS: 12585

20mm nominal internal gun metal globe valve and nozzle.

Drum and brackets for fixing the equipments on wall.

Connections from riser with 25mm dia stop gun metal valve and M.S pipe and socket.

Supplying and fixing 63mm dia gun metal short branch pipe with 20mm nominal internal diameter size nozzel conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:

Gunmetal

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required:

2 way-100mm dia M.S pipe

Providing and fixing pressure switch in MS pipe line including connection etc. as required.

Providing & placing on terrace (at all floor levels) polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet & overflow pipes but without fittings and the base support for tank.

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required:(Terrace Pump).

Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS: 1520.

Suitable HP squirell cage induction motor TEFC type suitabe for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure horizontal foot mountaed type Class-'F' insulation,conforming to IS:325.

M.S fabricated common based plated , coupling, coupling guard, foundation bolts etc.as required.

Suitable cement concrete foundation duly plastered and with anti vibration pads.

900 lpm at 35m Head

VRF SYSTEM

OUTDOOR UNIT

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5.

FOR BUILDING

INDOOR UNIT - CASSETTE

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

INDOOR UNIT - HIGH WALL TYPE

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

INDOOR UNIT - DUCTABLE TYPE

COPPER REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

DRAIN PIPING

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge

25 mm outer dia pipes.

32 mm outer dia pipes.

DUCTING, GRILLS, DIFFUSER AND INSULATION

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable( to be used as control cabling), 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required

Supply, installation, testing and commissioning of following krone type tag blocks enclosed in MS enclosure of suitable size with lockable cover.

20 pair Tag block

50 pair Tag block

Supply, laying, testing and commissioning of following size of 0.6mm dia copper conductor multi pair telephone cable as per suitable for indoor telephone wiring conforming for ITD S/WS - 113 C and S/WS - 114 (actual qty. may vary as per site) in existing conduit/ trench/ tray.

10 pair Armoured. Cable(Incoming from BSNL TAG BLOCK)

50 pair Cable(Unarmoured Cable)

Supplying, drawing, connecting & testing of 4 pair CAT-6 (E) wire for Data Outlet in existing conduit

Supply, fixing, testing & commisssioning of Modular RJ-45 with data outlet socket with grid & cover plate in suitable size of 16 SWG GI box.

Supply of following fans & Light fittings with Electronic Ballast (THD<10%, HF-P), starter, control gears, lamps holder, transformer etc. as called for and flexible wires as required for fixing including providing of Lamps as required.

24 W TRIM CLIPON LED PANEL CEILING SURFACE LIGHT

20 W LUMILINE - ALL PURPOSE SURFACE AND WALL MOUNTED LED TUBE LIGHT

10 W LUMILINE PLUS -MIRROR WALL MOUNTED LED LIGHT

9 W GLOBE -DECORATIVE WALL LIGHT FIXTURE MADE UP OF POLYCARBONATE, -

10 W RUGBY GENX 10 -DECORATIVE WALL BULK HEAD LIGHT

Heavy Duty Exhaust Fans-Turbo Force SP -300 MM 2 N 900 r/min (rpm)

40 W STOUT PLUS -SURFACE /SUSPENDED AND WALL MOUNTED LED LIGHT

40 W 2'X2' LED GRID CEILING LIGHT -Octane LED 2x2 Panel

18 W Octane+ LED Panel Round Light

Supply of following sizes of XLPE/ PVC insulated Aluminum/ Copper conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications.

XLPE insulated Al. Ar.Cable

3.5 x 95 sq.mm.

Design, supply, erection& commissioning of following distribution panels made of 2 mm thick CRCA steel sheets, Floor mounted, fully enclosed, compartmentalized, dust & vermin proof with hinged & lockable doors, & complete with earthing, painting as required and mounted with the following : ( for detail specs refer technical specifications).

ELECTRICAL PANEL

SECTION –1

INCOMER

-200 A, 4P,35 KA, MCCB with following :

METERING & CONTROLS

- ON/OFF phase indicating lamps with control fuses .

SECTION –2

BUSBARS

- 250 A, TPN, Al Bus Bars with heat shrinkable PVC Sleeves – 1 set.

SECTION –3

OUTGOINGS

- 32 A, TPN, MCB – 6 N.o.

- 40 A, TPN, MCB – 8 N.o.

- 63 A, TPN, MCCB – 6 N.o.

Note : Any indicating lamps to be used, in all the panels, will be LED type and of same make and size.

Note : all energy meters mentioned in this section will be electronic type complete with electromechanical counter.

Providing, fixing, testing and commissioning of pressure vessel (minimum 450 mm dia & 2000 mm height) for pressurization of hydrant system complete with pressure switches, pressure gauge, valves at outlet / drain to operate as per operating sequences including 80 mm dia drain valve, air release valve with stop cock on the top Duly painted from inside and outside complete as required.

Providing and fixing standard firemans axe with heavy rubber handle.

Providing and fixing 4 mm thick glass door of size 2.1 m x 0.9 m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet. Suitably marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminium work to be in Red P.O. colour.

Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683).

b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683).

c) ABC dry powder stored pressure type 6 kg capacity (IS:15683).

Starter

Dome Camera

Supply, installation, testing and commissioning of IP based, 4 MP, FULL HD WDR IR DOME CAMERA - 30 MTRS, colour indoor verifical dome camera, 3.6 MM FIXED LENS, 1/3 ", 4 Mega Pixel PS CMOS Image Sensor, WDR (120 dB), Day/ Night (ICR), IR Range of 30 Mtrs, IP67 and all ancillary equipments and all accessories.

Bullet cameras 5MP

Supply, installation, testing and commissioning of IP based, 5 MP, FULL HD WDR IR bullet CAMERA - 40 MTRS, colour indoor verifical camera, 3.6 MM FIXED LENS, 1/3 ", 4 Mega Pixel PS CMOS Image Sensor, WDR (120 dB), Day/ Night (ICR), IR Range of 40 Mtrs, IP67 and all ancillary equipments and all accessories.

Supply, Installation, Testing and Commisioning of 32 CHANNEL NETWORK VIDEO RECORDER, H.264/MJPEG dual codec decoding,Max 256 Mbps incoming bandwidth, HDMI/ VGA simulation video output, support 8 SATA HDD's upto 32 TB, 1 ESATA up to 16 TB, supports multi brand network cameras. Each NVR shall have a storage capacity so as to record a backup for 15 days at 4 CIF @ 25FPS.NVR should have system expandibility feature of at least 20% of current requirement, redundant fan and power supplies, outputs TCPIP network feature & server software monitor outputs. The NVR should be networkable via IP protocol & should be able to connect to a web based system for remote viewing via web system. Vendor should submit the storage / HDD Calculation.

Supply, Installation, Testing and commisioning of 32" inches LCD monitor PRIZOR BASIC

SITC of 8TB surviellance hard disk for nvr.

Design, supply, Installation, testing & commissioning of the following:

UPS SYSTEM

2.0KVA/1.8KW UPS System, 415V, 50Hz. Input and 3Ph.+ N, 50Hz. Output, High performance industrial grade UPS, Advance IGBT rectifier and IGBT PWM Inverter fully digital signal processor (DSP) base with following key features –MODULAR TYPE UPS WORKING IN PARALLEL

Ø Input Performance of UPS

· “ ZERO Impact on Source (SEB/DG)”

· IGBT PWM Rectifier

· Current harmonics - < 3% (iTHD)

· Input PF – 0.99

· Sequential Start up of UPS Systems (smooth change over to DG set)

· Wide voltage & frequency Tolerance (320V -480V & 45hz. To 55Hz.)

· Normal UPS operation during Input Phase sequence change

Ø Output Performance of UPS

· IGBT PWM Inverter, Short circuit proof.

· More output active power (rated @ 0.9 PF,2.0KVA = 1.8KW)

· Delta-Star Isolation Transformer

· Thermal over rated inverter design, more over load capacities, suitable for industrial loads. (110%, 125% & 150% - 60/10/1 Minute)

· Output Voltage 415V +/- 1% (Regulation)

· Out put Voltage wave form distortion at 100% non-linear loads (distorting Industrial loads)- < 3% (,1% at Linear Loads)

· Inbuilt Static bypass and manual maintenance bypass.

· On-line battery health monitoring (batteries always ready to work)

· Emergency Power Off (EPO), Energy back feed protection.

· Communication Options – UPS/ Power status can be monitored through user friendly software.

· Interface through – 2 Nos. RS232 Ports, SNMP, Potential Free contacts.

Sealed Maintenance Free (SMF) for minimum 60 Minute back up with each 2.0KVA UPS at full load complete with powder quoted battery racks, interconnecting links.

DISTRIBUTION PANELS

Design, supply, erection& commissioning of following distribution panels made of 2 mm thick CRCA steel sheets, Floor mounted, fully enclosed, compartmentalized, dust & vermin proof with hinged & lockable doors, & complete with earthing, painting as required and mounted with the following : ( for detail specs refer technical specifications).

ELECTRICAL PANEL

SECTION –1

INCOMER

-160 A, 4P,35 KA, MCCB with following :

METERING & CONTROLS

- ON/OFF phase indicating lamps with control fuses .

SECTION –2

BUSBARS

- 250 A, TPN, Al Bus Bars with heat shrinkable PVC Sleeves – 1 set.

SECTION –3

OUTGOINGS

- 32 A, TPN, MCB – 2 N.o.

- 40 A, TPN, MCB – 3 N.o.

- 63 A, TPN, MCB – 2 N.o.

Note : Any indicating lamps to be used, in all the panels, will be LED type and of same make and size.

Note : all energy meters mentioned in this section will be electronic type complete with electromechanical counter.

SHUBHAM TRADERS (BID ID -372922)