Loading…
Loading…
Tender Value
₹2.7 L
EMD Value
₹6,778
Closing Date
8 Jun 2026, 6:00 pm3d left
AEE
AEE,PWD Ele.SDN,Tvpm
LAC-ADS-Construction of Additional Class rooms at UIT - Azhoor-General Electrical Work
2026_PWD_853729_1
ESDT/ET-29/2026-27
Open Tender
Electrical Works
120 days
PWD Electrical Sub Division, TVPM
Please refer tender documents
6 documents required · 6 mandatory
₹600
₹6,778
Yes
2 Jun 2026
2 Jun 2026
10 Jun 2026
2 Jun 2026
8 Jun 2026
2 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Electrification | ||||||
| 1.001 | 1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C | - | point | 1,726.78 | - | BI01010001010000000000000515BI0100001114 |
| 1.002 | 1.14.1:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire | - | metre | 274.36 | - | BI01010001010000000000000515BI0100001115 |
| 1.003 | OD32876/2026-2027:1800 lumen round/ square(1X1) recessed fitting made of diecast aluminium, having efficacy not less than 110l/w, pf greater than 0.95, THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea | - | each | 2,754.17 | - | BI01010001010000000000000515BI0100001116 |
| 1.004 | 90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | - | each | 4,672.67 | - | BI01010001010000000000000515BI0100001117 |
| 1.005 | 90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps | - | metre | 731.39 | - | BI01010001010000000000000515BI0100001118 |
| 1.006 | OD35277/2026-2027:Supply, installation, testing and commissioning of 1200 mm sweep BEE-5 star rated ceiling fan
with brushless direct current motor (BLDC) , class of insulation B , 3 no's blades , 30 cm long
down rod , 2no:s canopies, shackle kit, safety rope , copper winding, power factor not less than
.9, service value (CM/M/W) minimum 6.00, Air delivery minimum 210 cum/min,350 RPM
(tolerance as per IS :374-2019, THD less than 10% including remote or electronic regulator unit
for speed control and all remaining accessories including safety pin, nut and bolts , washers,
temperature rise equal to 75 deg Celsius ( maximum) , insulation resistance more than 2
Megaohm , suitable for 230V,50 Hz, single phase AC supply , earthing etc., complete as
required: | - | each | 3,212.77 | - | BI01010001010000000000000515BI0100001119 |
| 1.007 | OD35267/2026-2027:Supply ,installation, testing and commissioning of 700lm pressure die cast housing Bulk head
with IP65 protection & IK 08 having efficacy not less than 105lm/W and giving connection
with 3 core flex wire as required. | - | each | 993.24 | - | BI01010001010000000000000515BI0100001120 |
| 1.008 | 90.4.2:Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required. | - | each | 207.64 | - | BI01010001010000000000000515BI0100001121 |
| 1.009 | 1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | - | each | 433.73 | - | BI01010001010000000000000515BI0100001122 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.04 MB
mom.pdf
Tender Documents • 0.19 MB
sbd.pdf
Tender Documents • 1.63 MB
sc.pdf
Tender Documents • 0.15 MB
BOQ_1442825.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid