Annual Maintenance Contract of Residential and Non Residential Buildings at Hydel Colony, Gobindpuri, Yamuna Nagar.

Amount

"A" (Scheduled items) Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth and lift up to 1.5 m, as directed by Engineer-in- Charge All kinds of soil 50 m lead

Excavating, supplying and filling of local earth (including royalty) cum by mechanical transport up to a lead of 1 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar

Demolishing brick tile covering in terracing including stacking of sqm serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling roofing including

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:- of sectional area 401 square certimeters above

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - incharge

Extra for cutting reinforcement bars manually/ by mechanical cum means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1: 1.5:3 or richer mix (i/c equivalent cum\design mix)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1 :2:4 or leaner mix (i/c equivalent cum design mix)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below

Dismantling steel work in built up sections in angles, tees, flats kg and channels Including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Dismantling cement conglomerate / terrazzo floors 25 mm to 50 sqm mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge.

Removing old broken/serviceable glass of any thickness or size sqm or description except polished plate glass from old wood or metal frames etc.(any thickness or size) hacking out old putty etc. including making good breakages in talking out and handling complete

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level :-1 : 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 cum graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) : 6 graded cum stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement

Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in Cement mortar 1:4 (1 cement: 4 coarse sand)

Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and laying of Conglomerate floor 25 mm thick cement concrete 1:2:4 on 100 mm cement concrete 1:8:16 and 100 mm sand or stone filling

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm

Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

1:4 (1 cement: fine sand) 12mm cement plaster of mix

15 mm cement plaster on the rough side of single or half brick wall of mix 1 :4 (1 cement: 4 fine sand)

10 mm thick cement plaster 1 :3 (1 cement: 3 fine sand)

Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Distempering with 1st quality acrylic distemper (Ready mix) having voc content less than 50 grams/ litre of approved brand and manufacture to give an even shade Old work (one or more coats)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work

White washing with lime to give an even shade Old work (two or more coats)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid separately Sal wood

Providing and fixing wire gauge laminated veneer lumber shutters conformingto IS : 14616, using galvanised wire gauge with average width of aperture 1.4mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors,windows and clerestory windows, including ISi marked M.S. pressed butthinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately 30 mm thick shutters

Providing and fixing factory made shutters of Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade I Type II, of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws, including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of 'U' beading and hinges will be paid separately) 25 mm thick

Providing and fixing 25 mm thick shutters for cup board etc Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /Wooden frames with rawl plugs screws etc

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 2nd class teak wood beading 62X19 mm

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 Nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer- in-charge Extruded section profile size 48x40 mm

Providing and fixing to existing door frames 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the comers by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting alvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter)

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes

Putting 1:3 Cement sand slurry, 6mm thick on prepared bed and side slopes before laying concrete on bed and side slopes

Curing Lining for 28 days ln bed

Curing Lining for 28 days On Side slopes

Cement pointing 1 :2 on lining In bed.

Cement pointing 1 :2 on lining On side slopes.

Providing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White vitreous chinaware Flat back wash basin size 550x 400 each mm with single 15 mm C.P. brass pillar tap

Providing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required (600X450X250mm)

Providing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous chinaware Orissa pattern W.C. pan of size each 580x440 mm with integral type foot rests

Providing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISi marked white solid plastic seat and lid

Providing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Providing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 (15mm nominal bore)

Providing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931(15mm nominal bore)

Providing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32 mm dia

Providing 8 mm dia C.P. I S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 1 o litre capacity - White

Providing on terrace (at all floor levels) polyethylene water litre storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in Charge With cement mortar 1 :4 ( 1 cement : 4 fine sand)

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1 :4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.

Taking out existing wooden door/window shutter, repair by cutting, painting etc. and refixing of repaired door/window shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 4 mm (weight not less than 1O kg/sqm)

Fixing old glass panes with wooden fillets (excluding cost of fillets)

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia up to 300mm

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level. Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, over1aps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. Cold twisted bars

Providing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm

Providing aluminium hanging floor door stopper, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

Providing aluminium tower bolts, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing ISi marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:75x63x4 mm

Providing ISi marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:100x63x4 mm

Providing aluminium e xtruded section body tubular type universal each hydraulic door closer (having brand logo with ISi, IS: 3564, embossed on the body, door weight up to 3 6 kg to 80 kg and door width from 701 mm to 1 000 mm), with double speed adjustment with ecessary accessories and screws etc. complete

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap each (standard pattern) the weight of cover to be not less than 4.5 kg

Providing Unplasticised PVC connection pipe with brass unions:22.101.1 30 cm length

Providing G.I. inlet connection for flush pipe connecting with W.C. each 12 78 90 pan.

Providing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work· Exposed on wall 22.88.1 15 mm dia nominal bore

Providing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect Switch 5 amp. on existing sheet. each 18 23.8.1.2 Wall socket 5 amp on existing sheet

Providing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect Wall socket 5 amp on existing sheet

Providing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect 15 amp. switch on existing sheet

Providing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect 6 pin 15 multi socket on existing sheet

Providing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete Call bell 220/230 volts musical type

Supply of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work.

Providing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect Bakelite angle/straight button holder large size

Water proof ply 12 mm thick

Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Providing and fixing 600x450 mm bevelled edge mirror of superior glass approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 :3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.

Providing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 20 mm dia

(Non-Schedule items-B) Finishing walls with exterior decorative cement based paints such as snowcem, Robbiacem etc. on old work, one coat to give an even shade.

Providing and fixing 20 mm internal diameter in position automatic brassball valves in tanks.

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantlled (a) Doors

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantlled (b) Windows

Providing of Helical Door spring ISI Mark (ISI Marked Ist quality).

Providing Pillar cock ISI Mark ESS ESS trend series, Jaquar (ISI Marked Ist quality).

Providing CP Floor Jali (ISI Marked Ist quality).

Providing Float valve 15mm for PVC cistern (ISI Marked Ist quality).

Supply of sewer man

Providing ball for 25mm float valve (ISI Marked Ist quality).

Providing syphon handle for cystern (ISI Marked Ist quality).

Providing PVC syphon complete set

Providing spindal washer of bib-cock with Jumper value

Providing Brass spindle for pillar cock/bib cock (ISI Marked Ist quality).

Providing GI socket ½” (VSC, Diplast, Unik ISI Marked Ist quality)

Providing GI socket ¾” (VSC, Diplast, Unik ISI Marked Ist quality)

Providing GI-TEE ½” (VSC, Diplast, Unik ISI Marked Ist quality)

Providing GI-TEE ¾'' x ½'' (VSC, Diplast, Unik ISI Marked Ist quality)

Providing GI-TEE ¾'' (VSC, Diplast, Unik ISI Marked Ist quality)

Providing GI Union ½'' (VSC, Diplast, Unik ISI Marked Ist quality)

Providing GI Union ¾” (VSC, Diplast, Unik ISI Marked Ist quality)

Providing Hex Nipple ½" x1" (ISI Marked Ist quality).

Providing ball valve ½” (ISI Marked Ist quality).

Providing ball valve ¾” (ISI Marked Ist quality).

Providing GI- Elbow ½” (VSC, Diplast, Unik ISI Marked Ist quality)

Providing GI- Elbow ¾” (VSC, Diplast, Unik ISI Marked Ist quality)

Providing GI- Elbow ½"x¾" (VSC, Diplast, Unik ISI Marked Ist quality)

Providing G.I. pipe ½'' (VSC, Diplast, Unik ISI Marked Ist quality)

Providing G.I. pipe ¾'' (VSC, Diplast, Unik ISI Marked Ist quality)

Supply of GI- Nipple ¾”x3”,4”,5”,6” etc (VSC, Diplast, Unik ISI Marked Ist quality)

Supply of GI –Nipple ½”x3”,4”,5”,6” etc (VSC, Diplast, Unik ISI Marked Ist quality)

Supply of CP- shower complete with rod

Supply of PVC steel grip Tape roll (ISI Marked Ist quality).

Supply of 19mm thick Water Proof Ply Board (Commercial)

Supply HDPE water storage tank Cover (ISI Marked Ist quality).

Supply PVC pipe 3" dia (4 Kg/cm²) ISI Mark

Providing wash basin jali

P&F CP Bottle trap ESS-ESS trend series, Jaquar

P&F syphon handle for cystern (ISI Mark 1st quality)

Providing Fiber sheet

Providing sink jali of ESS, ISI Ist quality

Providing washer for cistern

Supply of PVC pipe 1/2"

Supply of PVC pipe 3/4"

Supply of PVC pipe 4"

Providing iron hook

Providing main switch 32 AMP single phase SSK

Providing main switch 65 AMP tripple phase SSK

Providing aluminium sheet 2mm thick

Supply of PVC bend for 3" dia PVC pipe ISI Mark

Providing wooden moulding 1.5"

Providing PVC batten 1" for holding wire

PVC wire 1Sq mm (copper) ISI Mark

PVC wire 1.5 Sq mm (copper) ISI Mark

PVC wire 2.5 Sq mm (copper) ISI Mark

Supply of Adult Mazdoor (Unskilled)

Supply of Plumber

Supply of Carpenter

Supply of Electrician

Hiring of Hydraulic excavator (JCB)

Hiring of Tractor Trolley

Sh.Shiv Charan Sharma Contractor

jarnailsinghcontractor