Karnataka

Active

Works

Buildings

DETAILED ESTIMATION FOR THE PROPOSED CONSTRUCTION OF NO-2 V.C.DIVISION AND NO-3 V.C.SUB-DIVISION OFFICE BUILDING IN MADDUR TALUK & MANDYA DISTRICT.

Cauvery Neeravari Nigam Limited

CNNL No 2 VC Div Maddur | mysore, Karnataka

Amount: ₹4.1 CrCloses: 30 Jun 2026

Corrigendum

Due tomorrow

Corrigenda

Corrigendum

1 updatesLatest on 18 Jun 2026

Tender Value

₹4.1 Cr

EMD Value

₹6.2 L

Closing Date

30 Jun 2026, 10:35 pmDue tomorrow

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Cauvery Neeravari Nigam Limited

Work Description

DETAILED ESTIMATION FOR THE PROPOSED CONSTRUCTION OF NO-2 V.C.DIVISION AND NO-3 V.C.SUB-DIVISION OFFICE BUILDING IN MADDUR TALUK & MANDYA DISTRICT.

Tender Information

Tender ID

306402

Reference Number

CNNL/2026-27/BD/WORK_INDENT5125

Tender Type

Open

Product Category

Buildings

Location

CNNL No 2 VC Div Maddur

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredAnnual Turnover Certificate should be duly certified by CA with UDI number

RequiredKPWD Registration Certificate of class II and above

RequiredSimilar nature of work details

RequiredWork done Certificate with year wise executed quantity breakup duly certified by The Executive Engineer

RequiredLine of credit certificate from Scheduled/Nationalized Bank.

RequiredTechnical person certificates and CV

RequiredTender capacity calculation with existing commitments details

RequiredMachineries details

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The TENDER PROCEESING FEE will not be refunded

The employer is not responsible for any delay in accessing Karnataka Public Procurement Portal

The requisite Earnest Money Deposit (EMD) Through ONLINE only with validity from the date of opening of the tender. The tender schedule will be issued to the applicants who make payment through ONLINE only. Tenders received without valid EMD through e-payment will be rejected. Under this section of qualifying criteria the tenderer should furnish capacity details/ format

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval. Bidders should produce their original documents for verification during office hours related to uploaded documents in e-portal within 3 days of opening of technical Bid.

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, N02 V.C. Division, Maddur during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday/Declared holiday, the next working day will hold good for the respective events.

The intending contractors should note that if any of the lands either in part or in whole required for the work is not yet acquired by the Nigama it shall be the responsibility of the contractor to take possession of such land by consent of the owners before commencement of work at no extra cost to the Nigama and no claims whatsoever relating to non-availability of land would be entertained.

Defect liability period is THREE YEARS from the date of completion of the entire work, after issuing of work completion certificate from CNNL.

Tenderers shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka.

The Tenderer should furnish the name of the individual or firm or company with address and telephone number with place of registration year of incorporation etc

The scanned signature of the bidder/authorized representative of the bidders shall be attached while uploading the bid document

Necessary certificates should be signed by an officer not below the rank of the executive engineer or equivalent competent authority and should be countersigned by the superior officer not below the rank of superintending engineer or equivalent competent authority

The intending Bidder or firm or company should furnish list of man power available with him for taking up above work.

The intending Bidder or firm or company shall provide accurate information on the related from about any litigation or Arbitration resulting from contracts completed or on going under its Execution over the last five years. The consisting history of awards against the tenderer may result in failure of the application.

Tenderer should furnish a copy of the Income Tax Return for the preceding five financial year (2021-22 to 2025-26)

The intending Bidder or firm or company shall provide the audited balance sheets or other financial statement acceptable to the employer for the last five years (2021-22 to 2025-26) and must demonstrate the current soundness of the applicant financial position and indicate its prospective long term profitability. If deemed necessary the employer shall have the authority to make enquiries with the applicants bankers.

The Tenderer should furnish a valid copy of GST Registration Certificate.

Employees provident fund registration certificate along with copy of recent paid challan is to be furnished

Employees Provident fund Registration Certificatea) In respect of Contractors who are not registered with the EPF (Employees Provident Fund) authorities the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, N02 V.C. Division, Maddur , a statement showing the recoveries of contributions in respect of employees employed are through in and shall also furnish under the provision of the scheme to the commissioner, EPF. b)However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due from the contractor. not withstanding the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities

The intending bidders are advised to visit the site of work before attending the pre- bid meeting and also before submitting the tenders

Royalty Recovery from the contractors bill will be made as per Government Circular CI 81/MMN 2014 Bangalore Dt: 05-03-2014 & Circular from the office of Director Mines & Geology Department Dt: 13-03-2014 & Circular from the office of Director Mines & Geology Department Dt: 06.09.2018 further any Orders/Circulars issued by Government of Karnataka from time to time.

The rates quoted by the contractor must be Exclusive of gst etc. The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

GST will be deducted as per the prevailing Govt Orders from time to Time

Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use in this work

The work includes all lead and lift / delift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per Indian road congress and all relevant Indian codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height

If CNNL wishes engage third party consultants / PMC for quality control assessment apart from the CNNL quality control and field tests, the contractor should co-operate with both Quality control authorities and the third party

Performance security-Within 20 days of receipt of the letter of acceptance, successful tenderer shall deliver to the employer a security deposit in any of the forms given below for an amount equivalent to 5.00percent of the contract price plus additional security for unbalanced tenders (If quoted below) in accordance with the clause 25. 5 of ITT and clause 43 of the conditions of the contract.Cash/ Bankers cheque/ Demand draft/ Payorder/ Bank Guarantee in favour of Executive Engineer, N02 V.C. Division, Maddur payable at MADDURor specified small saving instruments pledged to Executive Engineer, N02 V.C. Division, Maddur

Security Deposit Will be withheld till the expiry of the defect liability period

Building and other construction workers welfare cess: The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill. This component is deemed to have been included in the quoted rate / Item rate

The contractors should adhere to the accepted action plan submitted by him under any circumstances without linking to the pending payment of the work

Sub leasing /subcontracting in any form is prohibited. Bids of bidders with track record of Sub leasing/subcontracting are liable for rejection

The quarries considered are for the estimate purpose only. The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard

On account of restrictions on sand mining and scarcity of availability of sand, as an alternative the use of manufactured sand (M-sand) confirming to relevant IS specifications may be allowed during the remodeling work

The rates includes all leads and lifts and work shall be carried out as per the instruction of Engineer in charge .All specifications are as per relevant IS codes in vogue and Indian Road Congress. The rates for the specification in the Schedule B includes all lead and Lifts irrespective of the distance and height, no extra claim will be entertained for additional lead and lifts

The contractor should have capacity of deploying centralized batching plant along with the transit mixture during execution of concrete works for both structures and lining

Successful Bidder should submit the PERT Chart at the time of Execution of Agreement

Successful bidder should execute work agreement within 20 days from the date of issue of Letter of acceptance, failing which his tender will be cancelled on Risk and Cost basis and his EMD will beforfeited.

As per FD GO dated 26.03.2019, NSIC exemption for EMD is not accepted

CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons

Typo graphical errors if any will not be the ground for any claims by the contractor

If the rate (s) quoted by tenderer for any item (s) of work is/are below the estimated rates of the department then the contractor shall furnish an addtitional performance ecurity for an amount equivalent to the difference between the cost as per quoted and the the estimated rates. In case of contractor quoting rate above 125% of the estimated rates,then the amount over and above 125% will be withheld during the progress of work. Additional performance security & fixed secured deposit as per KW rules should be given at the time of execution of the agreement.

The undersigned reserves the right to either postpone or to cancel the entire process of tender

Technical Criteria

Past Experience

Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work such as Construction/Improvements /Repairs to Buildings/ complex works of value not less than Rs. 206.00 Lakhs at 2026-27 price level Note: Work done certificate issued by competent authority not below the rank of Executive Engineer should be furnished Financial turnover & Work done of previous years indicated above shall be given a weightage of 10% per year to bring them to the price level of 2026-27

Work Done Certificate

Executed in any one year (for a continuous period of 12 months), the following minimum quantities of work (1) Excavation(Cum) 2618.42 cum (2) Flooring Tiles /CC /Marbel /Mosaic 1444.96 Sqm 3)CRM/SSM 342.23 Cum 4) Cement Concrete of all grade 1034.46 Cum (5)Steel (Tonne) 73.00 (6) Plastering 4048.94 Sqm (7) Brick / Concrete blocks masonry 169.41 Cum Note: Work done certificate with year wise breakup of quantities should be furnished.

Work Done Certificate

Capabilities of Vendor

Availability by owing at least 50 percent of the required specified key and critical equipment for this work and the remaining 50 percent can be deployed own/lease/hire basis for all works provIded the relevent documents and also should furnish copies of lease agreement of hiring of machineris/equipment to be deployed for this work 1. Excavator-2 No(1own,1own/lease/hire) 2. Tractor/Tipper/Lorry Mounted Water Tanker- 2 No(1 own.1 own/lease/hire) 3. Self-loader Concrete mixer(Ajax 2/4 Cum)- 2 No(1own,1own/lease/hire), 4.Tippers 2 No (1 own,1own/lease/hire), 5. Concrete vibrator-4 No (2 own,2own/lease/hire) and any other machnieries required for the work satisfactorily completion of the work within the scheduled period

Others -- ownership/lease documents

List of existing commitments and ongoing works

Others -- IN THE PRESCRIBED FORMAT

Assessed available tender capacity(AxNx1.5-B) where,A-miximum value of civil engineering works executed in anyone year during the last five years(updates to 2026-27 price level) taking into account the completed as well as works in progress B-value at 2026-27 price level of existing commitments and on-going works to be complete during the next 9 months (period of complition of the works for which tenders are invited) N-number of years prescribed for completion of the works for which tenders are invited. Note-1 The statements showing the value of existing commitments and on going works as well as the stipulated period of completion remainig for each of the works listed should be countersigned by the employer in charge, not below the rank of an executive engineer/equivalent 2. Failure of bidder to comply with the requirement in Prescribed proforma for qualification information as per section 3, will constitute sufficient ground for rejection of the technical bid.

Audited CA Certificate of Annual Turnover

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Others -- ownership/lease documents

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- IN THE PRESCRIBED FORMAT

Financial Status

The intending bidder/firm/ company / should have achieved in at least two out of last Five financial years (i.e. 2021-22 to 2025-26) (In all classes of civil Engineering construction works only) twice THE ANNUAL FINANCIAL TURNOVER of Rs. 823.00 lakhs.

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs 123.50 lakhs (Credit lines/ letter of credit/ certificates from scheduled / nationalized banks for meeting the fund requirement etc.) in the prescribed format.

Line of Credit

Total value of civl engineering works executed and payments received in the last five years (year-wise)

Others -- civIl engineering works executed and payments received DETAILS

Banker Details for reference

Line of Credit

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

Audited CA Certificate of Annual Turnover

Others

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Others -- Not applicable

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Others -- Not applicable

List of Financial Resources with Certificates

Others -- Not applicable

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹6.2 L

Important Dates

Last Activity

17 Jun 2026

Published

17 Jun 2026

Bid Opening

1 Jul 2026

Download Ends

30 Jun 2026

Pre-Bid Meeting

24 Jun 2026

BOQ Preview

•

DETAILED ESTIMATION FOR THE PROPOSED CONSTRUCTION OF NO-2 V.C.DIVISION AND NO-3 V.C.SUB-DIVISION OFFICE BUILDING IN MADDUR TALUK & MANDYA DISTRICT.

•

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...

•

Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking to the appropriate disposal area as per direction of Engineer-in-charge.

•

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.

•

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

•

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En...

•

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.

•

Earth work in surface excavation by manual means for lowering & levelling the ground by chiselling and wedging in Hard rock for all works other than foundation & depth not exceeding 100 mm as per draw...

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation,top ...

•

Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISCo...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).(P.9, i.5.2) SR 21-22

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, includingsetting out, shoring, strutting, barricading, caution lights, ...

•

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing & fixing of 3 track x 2 panel sliding windows made out of multichambered UPVC (Matching to RAL 9016) sections and with minimumTiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastom...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

•

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

•

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

•

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...

•

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

•

Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed...

•

Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 18 mm ...

•

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

•

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

•

Providing & Fixing of Mineral Fibre Suspended Ceiling System inthe module size of 600x600x19mm with Exposed grid for Hospitals,Shopping malls, Commercial establishments and office complexes.The tiles ...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).(P.9, i.5.2) SR 21-22

•

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) (2023-24 SR of Vol -2 Page No.117, Item No.13.4.2) 32 mm nominal bore

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) (2023-24 Srof Vol-2 Page No.117, Item No.13.4.1) 25 mm nominal bore

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I....

•

Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply...

•

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.

•

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

•

Providing and fixing PTMT grating of approved quality and colour. (P.No. 120, I.No. 13.22.2 of PWD SR 2023-24 of Vol-2 ) Rectangular type with openable circular lid

•

Providing and fixing 100 mm sand cast Iron grating for gully trap. (P.No. 136, I.No. 14.29 of PWD SR 2023-24 f Vol-2 )

•

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster ...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

•

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

•

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and...

•

Supplying and fixing PVC/metal conduit Deep junction box, 19/20 mm deep Junction box

•

Supplying and fixing PVC/metal conduit Deep junction box, 25 mm deep Junction box

•

Supplying And Fixing Metal Fan Box with Round Hook

•

Supply and laying of under floor(concealed) race ways manufactured from1.5mm thick cover and base (including partitions for multi compartment raceways), zero spangle pre-galvanized sheet steel with ...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6A One Way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6A Two Way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-Stepped Fan Regulator Two Module

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-16A One Way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6/16A Universal Socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-RJ45/I.O Outlet Cat-6

•

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box.

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Bakelite Ceiling Rose

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Batten Holder

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-100 A

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB)over the existing wood/panel board using necessary screws,bolts, nuts, necessary phase separators,handle and wiring complete. Protection of O...

•

Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC61439-3 and IK09 tested as per IS/IEC62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.16A-25A 2 pole

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40A 4 pole

•

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable forsingle phase 50Hz AC with latest microcontroller based, digital readout of percentage leakage cur...

•

Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board.

•

Supplying, fixing and wiring 0 to 100A Direct Reading AC analog type Ammeter

•

Supplying, fixing and wiring rotary selector switch suitable for Ammeter

•

Supplying, fixing and wiring rotary selector switch suitable for Voltmeter

•

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

•

Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS2834.3 phase,400/440Vgrade, for power factor improvement of rotating machineries like induction motor.

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

•

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/FRP/DMC insulator wh...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron..and M.S.Flat......with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint.-50 x...

•

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

•

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete- 12" Sweep (300 mm)

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220V/50Hz, Rated power upto...

•

Supplying ......TR split Air conditioners suitable for operation on A/C supply single phase 50Hz 230V with hermetically sealed compressor with air cooled condenser,motor capacitor and start run cap...

•

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is tobe mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C.

•

Supplying & fixing retrofit type-PL LED Lamp W LED linear source with CCT 6500 degree K, CRI more than 70%. efficacy more than 80 lumen per W, life more than 25000 burning hours and Compliance to IS ...

•

Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. Power Input: 220-240V at 50/60Hz & P...

•

Supplying of recess mounting non integral type LEDw luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500degree K,CRI...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

•

Supplying and fixing one of 230V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.

•

Supplying, fixing, wiring, earth electrode for grounding conduits,I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers,DG sets etc.using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on ...

•

GI strips for grounding connections, using necessary fixing materials as required.- 25 x 3 mm GI strip

•

Copper strips for grounding connections, using necessary fixing materials as required.- 25 x 3 mm Copper strip

•

Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / ...

•

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying andfixing 5A. ceilingrose, necessary

•

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

•

Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor-upto 5 kVAR

•

Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated ...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ligh...

•

Supplying of 95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm) XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring str...

•

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable.Up to 3.5 x 70/95/120 Sqmm

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT cable 35 to 95 Sqmm

•

Making and Fixing pot head for LT Cable, Heat shrinkable Type Terminations 35 to 95 Sqmm

•

Supplying, erecting, testing &commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz,A/C supply, with isolation transformer all accessories complete and Excluding batteries and wi...

•

Supplying, installation, testing & commissioning of 12VDC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150 AH capacity

•

Supplying and drawing UTP-CAT 6E LAN cable.

•

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable 2Pair

•

Supplying & Fixing of switch mounting rack with power manager & Cable manager.12U with 450mm depth

•

Supplying fixing of Network Switches 48 Port Gigabyte (manageable)

•

Supplying & fixing of I/O socket with back box Double I/O

•

Supplying & Fixing of ... ms Cat 6 Patch Cable 2 m

•

Supplying & Fixing of Patch panel for LAN cabling-48 Port 10/100 patch panel

•

Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 50 pair

•

Supllying and fixing Push Button Telephone

•

Geophysical investigation of site for sinking Borewell for supplying drinking water to Habitation either through the Handpump, MWS or PWSS by vertical sounding by adopting veener sounding by adopting ...

•

Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation...

•

Supplying and fixing 175 mm dia nominal resistance Medium block ERW casing pipes of 'B' Class with block electric resistances continuous welded mild steel tubes medium grade conforming to IS 1239-1990...

•

Supplying and deleviring at site submersible pumpset for 150 mm borewell and having the cleared duty conditions as detailed and satisfying the performance charecterstics for pump and motor as declared...

•

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall...

•

Providing NP/CP 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete...

•

KSRB13-6.3 : Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) nominal bore including cost of all materials, labour and HOM with all leads complete a...

•

Earth work excavation by manual means for pipeline trenches (except building works) including depositing on bank with all lead including shoring, strutting, barricading , danger ...

•

Providing and laying HDPE grade P.E 100 confroming to IS 4984-1995 Pipes PN-8 of 90 mm dia including jointing,fittings and specials for bore well rising main etc., complete.

•

KSRB13-7.1 : Providing and fixing in position nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM with all leads complete as per sp...

•

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and virg...

•

INDOOR TYPE PANEL BOARD : Supplying of panel board units fabricated out of 2 mm thick sheet metal to operate on 3 Phase / 4 Wire 50 Hz / 400 / 440 Volts AC Supply - 6 to 10 HP 30 Amps etc., complete a...

•

Erection, electrification and commissioning works of pumpset including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supportin...

•

Supplying and fixing polished wood board made of not less than 15mm thick plank on both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered inverted wood...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour. 32 AMPS

•

Fixing of ..... Amps TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labeling. 15A to 63A TPST

•

Supply and delivery of best indigenous brand new power capacitor as per IS2834/86 with latest amendments with ISI mark of required capacity tested and approved by the KEB authorities and errection ele...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

5125.doc

Tender Document • 4.73 MB

Ready to Participate?

Download all tender documents and submit your bid