REPAIRS REPLACEMENT OF JOINERY FLOORING TILING SANITARY FITTINGS AND SIMILAR WORKS FOR E AND J AREA AT NAVAL BASE KOCHI UNDER GE NW KOCHI

Amount

Taking down chowkats not exceeding 1.50Sqm but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

All as per Item No. 01 herein above, but area exceeding 1.50 Sqm and not exceeding 4 Sqm, complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as specified and as directed.

Dismantling timber scantlings, 40 Sq. cm and over in section, in framed work complete all as specified and directed.

S&F IInd class hard wood as in scantling, clean sawn timber, framed and fixed complete all as specified and directed.

Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 Sq. cm in section, unframed work, complete all as specified and as directed.

M&L IInd class hard wood as in fillets, sectional area exceeding 13 Sq. cm but not exceeding 25 Sq. cm, wrought, bull nosed, splayed, chamfered or rounded on one edge, square, rectangular or triangular in section and fixed with nails as in cover fillets complete all as specified and directed.

M&L for 2nd class Hard Wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and as directed.

S&F MS holdfast made out of Flat Iron 25mmx3mm, complete all as specified and as directed.

M&L PCC 1:3:6, Type C-1, using 20mm graded stone aggregate for fixing holdfast, including necessary form work, complete all as specified and as directed.

S&F 30mm thick Flush Shutter, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. Make : Century/ Action Tesa

M&L 30mm thick IInd class Hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc., edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutter as specified in SSR (Part-I)- 2009, complete all as specified and directed.

S&F 30mm thick IInd Class Hardwood, Plain, framed Panelled Shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board, medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and as directed.

S&F Factory made Solid Panel PVC Door shutter 30mm thick (Style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded ivory colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of ivory colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, and 5mm thick x 15mm wide PVC sheet beadings used inside stiles and rails and decorative PVC beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading and fixing in the frame at site complete all as per specification & drawings and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3mm thick Plain Sheet glass, ordinary quality and glazing with oil putty in square, not exceeding 0.50 Sqm in each pane, complete all as specified and as directed by Engineer in Charge.

S&F 5.5mm thick Plain Sheet glass, ordinary quality and glazing with oil putty in square, exceeding 0.50 Sqm in each pane, complete all as specified and as directed by Engineer in Charge.

S&F mild steel framed work as in doors, chowkats, grills, gratings etc., with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc., conforming to Fe-290, Gde-E-165 complete all as specified and directed.

S&F 100mm long mild steel butt hinge, medium weight, complete all as specified and as directed.

S&F 75mm long mild steel butt hinge, medium weight, complete all as specified and as directed.

S&F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

S&F 100mm long Aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

S&F 300mm long Aluminium anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F 150mm long Aluminium anodised 'D' Type handle, cast type, complete all as specified and as directed.

S&F 100mm long Aluminium anodised 'D' Type handle, cast type, complete all as specified and as directed.

S&F in repairs, 100mm size stainless steel Mortise Lock, 4 lever, vertical type, complete all as specified and directed.

S&F for Stainless steel wire cloth 0.36mm nominal dia. of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F in repairs, Stainless steel wire cloth 0.36mm nominal dia. of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F in repairs, 100mm stainless steel stay hook, fixed in wooden/ steel windows, complete all as specified and as directed.

S&F in repairs, 300mm long MS Helical door spring including roller and roller plate, complete all as specified and directed.

Repairs to rolling shutter of any size, including greasing & oiling, complete all as specified and directed.

Repairs to Aluminium Shutter for Doors/ Windows of any size including taking down and cleaning/ repairing/ replacement of all fittings and fixtures (if required) and re-fixing in the same opening, complete all as specified and directed at site by Engineer in Charge.

S&F in repairs, 30mm dia. Aluminium Drapery Rod, fancy type, powder coated, wood finish including rings, knobs and brackets complete all as specified and directed.

S&F in repairs, Aluminium (Die cast) body Door Closer hydraulically regulated, Designation No. 3, Universal Type, suitable for door shutters of 851mm to 1000mm in width and of weight between 61kg to 80kg and fixed, complete all as specified and as directed.

S&F in repairs, hydraulically regulated double action floor spring, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of heavy duty mild steel, complete all as specified and directed.

M&L for 6mm thick Plywood, Grade BWR, Type BB, fixed with screws to timber frame work, complete all as specified and directed.

S&F in repairs, 16-18mm thick MDF DWR Pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including beading/ matching laminates to exposed edges of board, complete all as specified and directed.

S&F in repairs, mild steel Continuous (Piano) Hinges, 30mm width of flaps, bright finish or electro galvanised, complete all as specified and directed.

S&F in repairs, 40mm dia. brass, polished cupboard knobs fixed with nuts, screws and washer of wooden finish, complete all as specified and directed.

S&F in repairs, magnetic catcher to wooden frame work, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as specified and directed.

S&F in repairs, stainless steel self-closing type hinges for kitchen cabinet of approved quality all as specified and directed.

S&F Ball Bearing for rolling shutters, complete all as specified and directed.

S&F Aluminium powder coated fixed type windows including suitable nylon beading, channel gasket etc., complete with following specification: Frame : 60mmx40mmx1.80mm Panel : 4mm thick ACP sheet/ 5mm thick tinted/ frosted glass of approved colour and design

S&F Aluminium powder coated door shutter with frames of size 40mmx45mmx1.8mm including screwing of frame glass, necessary joints cleats, glazing clips, rubber packing, snap beading, suitable handle, tower bolt, SS butt hinges, 4 lever mortise lock with 65 mm size latch, including aluminium anodized door frame of size 60mmx40mmx1.8mm thick fixed to wall with necessary screws and plug complete all as specified & directed. Note : Rates for one No. hydraulic door closer per shutter & 5mm thick tinted glass/ 4mm thick ACP sheet required to be fitted in shutters is included in the Item.

S&F Aluminium powder coated partition fixed/ sliding type with frames of size 85mmx44.45mmx1.5mm (sides, top rails and intermediate sections), including screwing of frame, glass, necessary joint cleats, glazing clips, rubber packing and snap beadings, fixed to wall with necessary screws and plugs, complete all as specified & directed. Note : Rates for 4.80mm thick tinted glass/ 4mm thick coloured aluminium composite panels required to be fitted in shutters is included in the Item.

S&F 4mm thick coloured/ wooden grain Aluminium Composite Panel of approved make as in cladding to PVC rainwater pipe/ RCC column etc. including necessary aluminium frame works at required level made out of Aluminium member weighing 1 Kg/RM. The panel should consist of 3.5mm thermoplastic core of antitoxic LPDE sandwiched between 0.25mm skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on top sides and service coating reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washers and cap nuts and all other accessories, sealing shall be done using weather sealant of Dow Corning 789 with necessary rods etc., complete all as specified and directed by Engineer in Charge.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

Demolition of brick work/ Stone/ Boulders built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving's not exceeding 15cm thick (above or below GL) complete all as specified and directed by Engineer in Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer in Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water any description, etc. complete all as specified and directed.

M&L Precast Cement Concrete Block Masonry 1:3:6, Type C-1 with solid blocks exceeding 10cm in width and setting in Cement Mortar 1:6 complete all as specified and as directed.

M&L for 25mm thick Precast Cement Concrete 1:2:4, Type B-0 using 12.50mm graded crushed stone aggregate as in sub base to floor, complete all as specified and directed by Engineer in Charge.

M&L 75mm thick Precast Cement Concrete 1:3:6, Type C-2 using 40mm graded crushed stone aggregate as in plinth protection/ hard standing, laid in panels, finishing the top surface even and fair without using extra cement, complete all as specified and directed by Engineer in Charge.

M&L 75mm thick Precast Cement Concrete 1:4:8, Type D-2 using 40mm graded crushed stone aggregate as in sub base to floor, complete all as specified and directed by Engineer in Charge.

M&L Reinforced Cement Concrete 1:2:4, Type B-1 using 20mm graded crushed stone aggregate as in slabs, shelves supported on walls, beams and columns in floor or roof including balconies, canopies, deck slabs or in chajja/ facia projection and the like complete all as specified and directed by Engineer in Charge.

Mild steel TMT bars, 10mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165), complete all as specified and as directed.

M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces (Horizontal or Sloping) complete all as specified and directed by Engineer in Charge.

M&L Vitrified tiles, coloured, 8-10mm thick, any shade/ Double Charged (Square/ Rectangular), area of each tiles exceeding 0.36 Sqm but not exceeding 0.90 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in Cement Mortar 1:4, laying floor finishes, complete all as specified and directed by Engineer in Charge.

M&L Vitrified tiles, coloured, 8-10mm thick, Dark shade/ Double Charged (Square/ Rectangular), area of each tiles exceeding 0.36 Sqm but not exceeding 0.90 Sqm in vertical surfaces such as dado/ skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in Cement Mortar 1:3 to fix tiles, complete all as specified and directed by Engineer in Charge.

M&L for joint free (rectified) Non-skid Ceramic tiles, coloured, 7-8mm thick (Square/ Rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, over and including 15mm thick screed bed in Cement Mortar 1:4 as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed by Engineer in Charge.

M&L for joint free (rectified) Non-skid Ceramic tiles, coloured, 7-8mm thick (Square/ Rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, over and including 10mm thick rendering in Cement Mortar 1:3 as in walls, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed by Engineer in Charge.

M&L for Non-skid Endura tiles, coloured, 8-10mm thick (Square/ Rectangular) Grade-4, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, over and including 15mm thick screed bed in Cement Mortar 1:4 as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed by Engineer in Charge.

M&L for joint free (rectified) Non-skid Ceramic tiles, coloured, 7-8mm thick (Square/ Rectangular), area of each tile not exceeding 0.11 Sqm, over and including 15mm thick screed bed in Cement Mortar 1:4 as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed by Engineer in Charge.

M&L for joint free (rectified) Glazed Ceramic tiles, coloured, 450mm x 300mm x 7mm in vertical surfaces, over and including 10mm thick rendering in Cement Mortar 1:3, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed by Engineer in Charge.

M&L for Wall Cladding tile, 7-8mm thick, area of each tile exceeding 0.10 Sqm but not exceeding 0.20 Sqm of any colour and pattern, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering on wall in Cement Mortar 1:3 and surface finished even & fair complete all as specified and as directed by Engineer in Charge.

M&L for Vitrified tiles, coloured, 10mm thick, light shade (Square/ Rectangular), area of each tiles not exceeding 0.36 Sqm, over and including 15mm thick screed bed in Cement Mortar 1:4, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed by Engineer in Charge.

M&L for Vitrified tiles, coloured, 10mm thick, light shade (Square/ Rectangular), area of each tiles not exceeding 0.36 Sqm, as in skirting/ dado, over and including 10mm thick rendering in Cement Mortar 1:3, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed by Engineer in Charge.

M&L for Machine cut pre-polished Kota stone slab, 18-20mm thick as in floor/ treads of steps (single piece) laid over and including 15mm thick screed in Cement Mortar 1:4, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing complete all as specified and directed by Engineer in Charge.

M&L for Machine cut pre-polished Kota stone slab, 18-20 mm thick (single piece) as in risers to steps, skirting/ dado, pillars, window cills and the like, laid over and including 10mm thick rendering in Cement Mortar 1:3, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed by Engineer in Charge.

M&L for 18-20mm thick granite stone slab of any type, (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in Cement Mortar 1:4, complete all as specified and directed by Engineer in Charge.

M&L for rubber moulded, coloured, glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floors, over and including 15mm thick screed bed in Cement Mortar 1:4, complete all as specified and directed by Engineer in Charge.

M& L for grinding existing terrazzo or kota stone flooring by carborundum stone of 320 to 400 grit size, washing, cleaning and grouting with neat cement grout of cream like consistency using the same coloured cement as in the original mix. The surface shall be grinded again and shall again be washed, cleaned and rubbed hard with felt and slightly moistened oxalic acid powder, at the rate of 5 gm of oxalic acid powder for one Sqm of floor surface. Again, grind the surface and the wax-polish shall be sparingly applied with soft linen on the clean and dry surface. The polishing machine fitted with bobs shall then be run over the surface. Clean saw-dust shall then be spread over the floor and polishing machine again applied, mopping up surplus wax and leaving glossy surface. (Note:- Care shall be taken that the floor is not let slippery.)

M&L for 15 mm thick rendering in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15 mm thick rendering in Cement Mortar 1:4 mixed with liquid water proofing compound on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. Note : WPC shall be measured paid separately

M&L for 10mm thick plastering on roof, chajja and roof parapet in Cement Mortar 1:3 on RCC, finished even and smooth without using extra cement, including taking down existing cement plaster, complete all as specified and directed by Engineer in Charge.

M&L for 5mm thick rendering in ceiling, in Cement Mortar 1:3, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer in Charge.

Supply only liquid water proofing compound, complete all as specified and directed by Engineer in Charge.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and directed by Engineer in Charge.

M&L for two coats of oil bound distemper over a coat of 1.5mm thick wall putty to newly plastered surface including preparation of surfaces and applying a coat of primer, complete all as specified and directed by Engineer in Charge.

M&L for two coats of cement based paint over a coat of primer to newly plastered surfaces of wall including preparation surfaces, complete all as specified and directed by Engineer in Charge.

M&L for preparing plastered or unplastered surfaces by washing down and scrapping old distempered surface and applying one coat of oil bound distemper on wall surfaces, complete all as specified and as directed by Engineer in Charge.

M&L for preparing surface of old wall by washing, rubbing down and stopping of surfaces and applying one coat of cement base paint on walls, complete all as specified and directed by Engineer in Charge.

M&L for preparing old decorated surfaces and applying one coat of white wash on ceilings, complete all as specified and directed by Engineer in Charge.

S&F in repairs, 110mm dia. PVC (SWR) rain water pipes, single socketed, in any length with rubber ring joints, including bend, elbow, iron brackets for fixing etc., laid in trenches/ floor or fixed to wall including necessary clamps, complete all as specified and directed.

S&F in repairs, 75mm dia. PVC (SWR) rain water pipes, single socketed, in any length with rubber ring joints, including bend, elbow, iron brackets for fixing etc., laid in trenches/ floor or fixed to wall including necessary clamps, complete all as specified and directed.

S&F in repairs, 110mm bore PVC (SWR) bend, any radius, complete all as specified and directed by Engineer in Charge.

S&F in repairs, 75mm bore PVC (SWR) bend, any radius, complete all as specified and directed by Engineer in Charge.

S&F 75mm Stack Clamps made out of 50 mm x 5 mm Flat Iron and 16mm dia. round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S&F 100mm Stack Clamps made out of 50 mm x 5 mm Flat Iron and 16mm dia. round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S&F 200mm dia. half round or 180mm width Rectangular PVC (SWR) eaves gutter, ready made, of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend WC/ MS Clips etc. complete all as specified and as directed.

S&F in repairs, vitreous china Squatting Pan ‘Orissa Pattern’, of size 580mm x 440mm, white, with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe, etc. and including lime concrete bedding, complete all as specified and directed.

S&F in repairs, PVC low level Flushing Cistern, 10 Litres capacity of approved make, including fixing of brackets, connection to WC with CI brackets and making good disturbed area, complete all as specified and directed.

S&F in repairs, white, glazed Vitreous china Wash Hand Basin, flat back of size 550mmx400mm including CI brackets, PVC waste pipe with coupling, complete all as specified and as directed.

S&F in repairs, Vitreous china wash down Water Closet, pan pedestal pattern, white, including fixing with trap and PVC matching seat cover, complete all as specified and directed.

S&F in repairs, 150mmx150mm size Stainless Steel Grating with or without hole for waste pipe, complete all as specified and directed.

S&F in repairs, 600mm long Brass CP Towel Rail, "D" Type, complete all as specified and directed.

S&F in repairs, vitreous china Soap Dish, fixed to wall with screws, complete all as specified and directed.

S&F in repairs, 15mm bore Chromium Plated fancy type Pillar Taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs, Vitreous China Urinals, Half Stall Type including providing and fixing plugs, bedding urinal against wall in Cement Mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with PTMT Urinal spreader, grating and Union for discharge pipe (Inclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed by Engineer in Charge.

S&F in repairs, Sheet Glass Shelf assembly consisting of 12cm wide & 5.5mm thick sheet glass shelf, with chromium plated bracket guard and 60cm long railing, including aluminium alloy bracket and guard rail, complete all as specified and directed.

S&F in repairs, corner shelf with 5mm to 6mm thick sheet glass and Stainless Steel railing of approved quality, fixed with brass screws, complete all as specified and directed.

S&F in repairs, Stainless Steel Towel Ring of standard quality, complete all as specified and directed.

S&F in repairs, vitreous china Table Top Wash Hand Basin, size 640mm x 400mm x 120mm excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed.

S&F in repairs, vitreous china wash down Water Closet, pan single piece (pedestal pattern) of size 365mm x 655mm x 760mm, UF soft close seat cover, fixing accessory set, cistern fittings and S Trap 220mm, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description, complete all as specified and directed.

M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for Welded Steel Wire fabric weight not exceeding 4 Kg/Sqm fixed to steel members, complete all as specified and directed.