Constructing Anganwadi At Village: Jasamatpur, Ta. Dhrangadhra, Dist. Surendranagar (Third attempt)

BILL OF QUANTITIES

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

1 Excavation for foundation upto 1.5 m depth including 49.80 Cum 203.83

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

2 Providing and laying cement concrete 1:4:8 (1 cement : 4 13.18 Cum 2826.99

coarse sand : 8 B.T. machine crushed stone aggregates 40 mm

nominal size) and curing etc. complete excluding cost of form

work in foundation and plinth.

3 Providing and laying ordinary cement concrete 1:1½:3 (M- 12.30 Cum 4499.55

200) using B.T. stone aggregate and curing of concrete

complete, including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in (A) Foundations,

footings, base of columns and mass concrete.

4 Providing and laying ordinary cement concrete 1:1½:3 (M- 1.40 Cum 7699.23

200) using B.T. stone aggregate and curing of concrete

complete, including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in Columns up to

5 Providing and laying ordinary cement concrete 1:1½:3 (M- 5.10 Cum 4408.65

200) using B.T. stone aggregate & curing complete including

the cost of form work but excluding the cost of reinforcement

for R.C.C. work in Ground Beam.

6 Filling available excavated earth (excluding rock) in trenches. 22.30 Cum 130.39

plinth, sides of foundations etc. in layers not exceeding

cm. in depth consolidating each deposited layer by ramming

7 Brick work using common burnt clay building bricks having 9.15 Cum 4051.78

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)(B) Conventional

8 Filling in foundation and plinth with murrum or selected soil 24.60 Cum 282.02

in layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

9 Filling in plinth with sand under floors including watering 10.80 Cum 424.90

ramming, consolidating and dressing complete

10 Carring out plinth treatment to post construction / existing 52.00 Sqm 56.63

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As

Per 6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

11 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 3.85 Cum 3631.49

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

12 Providing and laying ordinary cement concrete 1:1½:3 (M- 1.90 Cum 7699.23

200) using B.T. stone aggregate and curing of concrete

complete, including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in Columns for all

13 Brick work using common burnt clay building bricks having 21.75 Cum 4320.08

crushing strength not less than 35 kg/Sq.Cm. in

superstructure above plinth level upto floor two level in

Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Conventional brick etc. complete

14 Providing and laying cement concrete 1:3:6 (1-Cement : 3- 4.25 Cum 3153.22

coarse sand : 6- B.T. machine crushed stone aggregates

mm nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

15 Providing and laying ordinary cement concrete 1:1½:3 (M- 1.80 Cum 6907.39

200) using B.T. stone aggregate and curing of concrete

complete, including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in Lintels for all floor

16 Providing and laying ordinary cement concrete 1:1½:3 (M- 5.10 Cum 6095.35

200) using B.T. stone aggregate and curing of concrete

complete, including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in Beams for all floor

17 Providing and laying ordinary cement concrete 1:1½:3 (M- 6.50 Cum 6392.29

200) using B.T. stone aggregate and curing of concrete

complete, including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in Slab for all floor

18 Providing TMT Bar FE 500D reinforcement for R.C.C. work 2850.00 kg 76.21

including bending, binding and placing in position complete

upto floor two level

19 Providing and fixing both sides polished machine cut kota 12.50 sqm 615.09

stone shelves / partition of single piece (maximum 150 cm)

25 mm thick embedded into wall with groove in cement

mortar 1:2 (1 cement : 2 fine sand), including racking and

finishing smooth the surface, including joined with grey

cement, rubbing, cutting the stone as and where required etc.

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

20 Providing 15mm thick cement plaster in single coat on Rough 126.00 Sqm 234.33

(Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand) including

finishing with a floating coat of neat cement slurry for

21 Providing 10 mm thick cement plaster in single coat on brick 43.00 Sqm 211.74

/ concrete on ceilings and sofits of stairs for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) including finishing

with a floating coat of neat cement slurry Ground Floor

22 Providing 20mm thick cement plaster in single coat on single 180.00 Sqm 256.60

or half brick walls for interior plastering upto floor two level

and finished even and smooth in (i) Cement mortar 1:4 (1-

cement:4-sand) including finishing with a floating coat of

neat cement slurry for Ground Floor

23 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 65.30 Sqm 1204.20

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light

24 Providing and laying Ceramic tiles 6mm thick in skrting 27.00 Sqm 975.13

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

25 Providing and laying Ceramic tiles 6mm thick in flooring 1.80 Sqm 944.91

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

26 Providing and fixing 18 mm thick mirror polished Granite 15.80 Sqm 2183.62

stone of machine cut & full round edge and polished of

approved quality in cladding on sill and around the Doors /

windows / ventilation with 20 mm thick cement plaster 1:3

and jointed with white / matching pigment cement slurry &

adhesive, including polishing & moulding of exposed edges

etc. complete for all floor level as directed by Engineer-in-

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

27 Constructing a Sandwich type cooking platform of 60 cm 3.80 Sqm 5436.83

width and 70 cm height resting with Granite polished stone

top and 100 mm height faces in exposed faces with 18 mm

thick of polished Granite stone of approved colour and quality

on 25 mm x 2 No polished Kota stone sandwich supports,

polished kota stone shelves and fixing stone using cement

mortar 1:2 (1 cement : 2 fine sand) for sandwich and fitting at

bottom & edges with water proof rigid adhesives, including

mocking necessary grooves in walls, polishing and making

edges etc. complete as directed by Engineer-in-charge. (Only

top clear area of platform shall be measured and paid for)

28 Providing and fixing Stainless steel kitchen sink Glossy ASIS 1.00 No. 1173.78

304 grade and 1 mm thick with over all size 510 x 432 x

and bowl size 455 x 368 x 190 mm of approved brand as

directed by Engineer-in-charge with all fittings like C.I. or

M.S. brackets painted white / or fixing on stone base,

29 Providing and fixing standared extruded of alluminium 0.40 Sqm 1175.56

section of size 63mm x 38.10mm x 1.2mm @ Wt.

Kg/Rmt with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

30 Providing and fixing extruded colour anodized aluminium 6.40 Sqm 3171.40

three track sliding window having aluminium section having

outer frame for bottom member of size 92.00 x 31.75 x

mm size weight of 1.07 KG / Rmt and outer frame for top and

sides members size 92.00 x 31.75 x 1.50 mm size weight of

31 Providing and fixing 35 mm thick shutter for door having 4.40 Sqm 4116.76

factory made solid core, melamine faced, three layered resin

flushed door of approved brand and manufacture, with 1 mm

thick decorative laminated sheet on both side with 6 mm thick

and 35 mm x 35 mm specially shaped moulded teak wood

beading fixed around the door with necessary fixtures and

fastenings like S.S. butt hinges, S.S. Aldrop, S.S. Handle size

32 Providing and fixing M.S. plain Grills (Safety Grill) / Shutter 609.80 Kg 101.48

of required pattern to wooden frames of window / Door etc.

with M.S. flats at required spacing and frame all-round square

or round bars with round handed bolts and nuts or by screws,

including primer coat of approved quality and two coats of oil

painting etc. complete.

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

33 Applying two coats of putty & two coats of primer of 126.00 Sqm 40.59

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth.

34 Wall painting (two coats) with plastic emulsion paint of 126.00 Sqm 78.90

approved brand and manufacture on undecorated wall surface

to give an even shade including thoroughly brushing the

35 Wall painting (two coats) with plastic emulsion paint of 43.00 Sqm 84.16

approved brand and manufacture on ceiling and sloping roofs

to give an even shade including thoroughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth.

36 Finishing wall with weather proof exterior emulsion paint on 180.00 Sqm 114.53

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials etc. complete

37 Providing and laying water proofing treatment on terrace with 46.10 Sqm 1072.29

broken China mosaic tiles flooring over average 40 mm C.C.

1:2:4 bedding for maintaining slope for plain and curve

surface & 12 mm to 20 mm of broken piece of ceramic /

glazed tiles (one for more colour as directed) to be laid over

cement mortar bedding of C. M. 1:3 (1 cement : 3 sand)

contain one KG of water proofing materials per bag of OPC at

38 Providing and fixing water closet squatting pan (Indian type 1.00 No 1394.81

W.C. pan) size 580 mm (Including 'P' or 'S' trap, foot rests

and excluding earthwork, bed concrete) Including providing

and fixing 100 mm size “P” or “S” trap for water closet

squatting pan including jointing the trap with the pan and soil

in cement mortar 1:1 (1 cement : 1 coarse sand) including P

& F in cement mortar 1:3 (1 cement : 3 coarse sand) A pair of

39 Providing and fixing Wash basin with single hole for pillar 1.00 No 2075.55

tape with C.I. or M.S. brackets painted white including

cutting holes and making good the same but excluding

fittings. (A) vitreous china : (ii) Flat back wash basin 550 mm

x 400 mm size, (i) in white colour, including fixing 32 mm

dia C.P. Brass waste pipe, 32 mm dia M. I. Fisher union,

mm dia stop tap and 15 mm dia capstan head pillar tap, screw

down high pressure with screws shanks and back nuts & inlet

& outlet connections for wash basin etc. complete.

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

40 Providing erecting and fixing double coated ISI water tank of 1000.00 Litre 3.95

required capacity each with all necessary fittings and

connection etc. complete on terrace

41 Providing and fixing screw down bib taps of following 3.00 No 186.83

size.(B) Brass chromium plated screws down Bib Tap. (i)

42 Providing and fixing concealed Cock of premium make with 1.00 No 808.00

necessary other materials and piping connections etc.

complete as directed by Engineer-in-charge.

43 Providing and fixing Angle Cock of premium make with 2.00 No 606.00

necessary other materials and piping connections etc.

complete as directed by Engineer-in-charge.

44 Providing and fixing C.P. brass towel rail complete with C.P. 1.00 No. 603.19

brass brackets fixed to wooden plugs with C.P. brass

screws.(B) 600mm x 20mm size.

45 Providing and fixing PVC SWR Nahni trap IS 14735 for 1.00 No 558.36

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good

46 Providing and fixing 600mm x 450mm bevelled edge mirror 1.00 No 833.73

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden plug with C.P. brass

screws and washers.

47 Constructing brick masonry chamber for underground C.I. 1.00 No 3660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

48 Providing and fixing S.W. gully trap with C.I. grating brick 2.00 No 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

49 Providing and Fixing PVC Spigot and Socket Soil 15.00 Rmt 277.43

waste and Ventilating Pipe of the following nominal

size 75 mm dia.

50 Providing and Fixing P.V.C. Spigot and Socket Soil 10.00 Rmt 336.24

waste and Ventilating Pipe of the following nominal

size 110 mm dia.

51 Providing and fixing M.S. fan clamps type 1 of 16 mm. 4.00 Rmt 125.99

dia M.S. bar bent to shape with hooked ends to R.C.C.

slabs during laying including painting the exposed

portion of the loops all as per standard design

52 Providing laying and jointing in true line and level 30.00 Rmt 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

53 Providing laying and jointing in true line and level 20.00 Rmt 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

54 Providing Sock well of inside Dimension 3.00 mt. Deep 1.00 No. 41849.35

& 2.00 mt. Dia. Incl. Excavation, honey comb masonary

work in C.M. 1:6 incl. Covering the top with slab and

providing mainhole cover incl. Providing vatas and

curing etc. complete..

55 Constg Septic tank Including Excavation,B.B.C.C. 1:5:10, 1.00 No. 23273.43

with brick masonarry wall in C;M 1:6 finished with

Cement plaster in C;M; 1:3 incl. partition with half brick

masonary.Etc complete.

56 Bala concept drawings on walls as per the instruction 1.00 No. 6060.00

of Engineer in charge

57 Providing and fixing pre cast rubber dye/steel dye inter 19.60 Sqm 683.88

locking concreate block 60mm thick with grade of

concreate m-300 pnumatic compressed/vibrated

mechanically and as per approved design confirming to

IS 15658: 2006 including 35mm sand layer for levelling

and filling the joint with sand in proper line and level as

per guidlines of IRC; SP 63-2018 etc. complete

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

58 Supplying and fixing slide, seesaw and swing combo 1.00 Job 40400.00

set as per the instruction of Engineer in charge.

59 Point wiring for Light / Fan / Bell / Primary Point with 2-1.5 Sq.mm 8.00 point 299.97

& earth wire of 1.5 Sq.mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in / flushed on wall /ceiling,

complete with 6A Tissino Type ISI marked flush type switch / bell

push and accessories erected on Metal / PVC Box covered with

mm thick PC (Polycarbonate) / Acrylic sheet with necessary Lamp

holder / ceiling rose / H.D. Connector as directed. (c) with oval

conduit /pvc casing capping double lock type

60 Point wiring for independent PLUG with following size mains 5.00 point 336.33

earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in /flushed on wall/ceiling , complete

with ISI marked 3 / 5 Pin socket and tissino type switch erected

with earth continuity connection erected on Metal / PVC box

covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (h) with

oval conduit /pvc casing capping double lock type

61 Mains with ISI marked electrolyte stranded copper conductor, Non 45.00 Mtr 66.66

PVC Zero Halogen free fire retardant insulated copper conductor,

insulated wire (HFFR) conforms to IS-694, erected in existing pipe

with 1.5sq. mm copper conductor of same specifications for earth

continuity of following size. [i] 3 wire 1.5 sq.mm

62 Supplying & erecting earth pit of minimum bore dia.150mm size 1.00 No's 4591.46

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications. (a) For

Electrical Installation up to 440V in normal soil Length of pipe -

Mtr Back filling compound - 1 Nos Bag of 15 Kg.

63 Providing & Erecting following Shockproof tissino type accessories 2.00 No's 31.31

erected on 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal

Box. erected on wall/ ceiling. (1) One no Single pole 6 A Switch /

64 Providing & Erecting following Shockproof tissino type accessories 2.00 No's 47.47

erected on 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal

Box. erected on wall/ ceiling. (3) One no Single pole 16 A Switch

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

65 Providing & Erecting following Shockproof tissino type accessories 2.00 No's 219.17

erected on 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal

Box. erected on wall/ ceiling. (14) Electronic Hum free EME Socket

Type Steps Fan Regulator

66 Providing & erecting Switch board for Computer or electric 2.00 No's 332.29

apparatus consisting of following items in single board erected on

PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic

sheet erected as directed 1 no. 6A/16A universal plug-switch

combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug

67 Providing & erecting 240 V MCB double pole switch for motor & 1.00 No's 330.27

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity (B)

40 Amp. Cat.III

68 Providing and erecting Sheet Steel powder coated MCB 1.00 No's 702.96

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, confirming to IS 13032 and BS

5486-1986 without MCB to house appropriate nos. of MCBs. (The

DBs should be used of same company of MCB to be used) (A,a,iii))

Single phase 8 way single door

69 Supplying & erecting 5 stage single reverse osmosis water 1.00 No's 15620.66

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter

suitable buster DC pump capacity 80 psi, mention with 40 psi inline

type post carbon filter auto low & high pressure switches with

following size of storage tank & LPH capacity & erected as directed

[B] 25 Ltr / Hr with 30 Ltr. Storage Tank

70 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 2.00 No's 535.30

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)(A) Tube Light

with integral driver (v) 36-40 Watts, Surge-2 KV, IP-20, conventional

71 Supplying and erecting led lamps with following wattage capacity 3.00 No's 404.00

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable for

E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral

type, with PC diffuser suitable LAMP holder (v) 21 to 30 watts Cat

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

72 Providing and erecting Approved make Ceiling fan with double ball 2.00 No's 1596.81

bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing hook or clamp with earthing.

[Make shall be approved by Engineer in charge]

73 Approved make ELCBs / RCCBs conforming to IS: 12640 and having 1.00 No's 1722.05

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA

and suitable for operation on single phase 240 V. having

characteristic of quick action & tripping with all advance feature &

do not incorporate any electronic component. for following Max.

rating erected as directed (ii) 40Amps. DP Cat-II

74 Providing & erecting open well type horizontal mono block pump 1.00 No's 7934.56

set with stainless steel body having following specification (A)

H.P. single phase open well motor pump set having discharge of

115 LPM @ 15 mtr. head suitable for 32 mm dia. delivery pipe with

control panel Cat. II

75 Supplying & Erecting floor mounted/ table top single phase 50Hz 0.00 No's 11557.43

water dispenser with SS 304 food grade cold tank specification

having three water tap of hot/cold/ambient water function, LED

display with storage capacity from 2.5 Ltrs to 3.2 Ltrs, cooling

capacity 2.5ltrs/hr, including refrigerant with 20ltrs refrigerant

storage capacity compartment inclusive 1No.water topping bottle

76 Providing and Fixing SS 304 Foldable Checking bed having size 1.00 No 6060.00

1.50 X 0.60 X 0.75 mm including using of 25mm dia pipe, SS 2mm

thick, matter of 25.4 (1") of 40 density, cover with regine cloth of

approved quality etc completed as directed by Engineer incharge.

77 Providing and Placing IT wood writing table having size 1.50 X 0.75 1.00 No 12120.00

X 0.75 mt with one side drawer with using of 19mm thick WP wood,

top cover with 1 mm thick wood type Formica including using of all

necessary material & labour etc completed as directed by Engineer

78 Providing and Fixing of SS 304 Hanger for bag including using all 10.00 No 252.50

necessary materials like SS rail, screw etc completed as directed by

Engineer Incharge.

79 Providing and Fixing pin cushion display board having size 1.20 X 1.00 No 606.00

0.75 mt including using of alluminum section frame, 18mm thick

WB plywood, nevy blue Cushion cloth pin etc completed as

directed by Engineer Incharge.

80 Providing and fixing PVC modular kitchen cabinet consisting of 2.50 Sqm 6565.00

base and wall units, made from high quality rigid PVC boards

(minimum 15–18 mm thick), including shutters, shelves, drawers, SS

hinges, telescopic channels, handles, magnetic locks, necessary

fittings, cutting, fixing, complete as per design and direction of

Engineer-in-charge.

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

81 Providing and fixing foldable MS ladder having 0.90mt wide & 50.00 Kg 110.77

3.60mt long including rod hinge arrangment at middle with ladder

including one coat of red oxide & two coats of oil paint etc

completed as directed by Engineer incharge.

82 Providing and fixing of hook of 10mm or 12mm dia including 1.00 No 303.00

drilling hole, fixing of male- female thrade fastner sealing the same

with appoxy compound, finishing the same etc complete as

directed by Engineer incharge.

83 Providing and fixing medical device & equipment standio meter 1.00 No 1414.00

height measuring scale 2.10mt long including fixing in wall with

using of all heavy SS screw, rail etc complete as directed by

Engineer incharge.

84 Providing and supplying standard PVC (Polyvinyl chloride) Chair 2.00 No 1010.00

with handle of approved design and make as directed by Engineer

85 Providing and supplying standard PVC (Polyvinyl chloride) Stool 2.00 No 606.00

having size 3.75 X 0.60 X 0.45mtr of approved make as directed by

Engineer incharge.

86 Providing & fixing ABC type fire extinguisher 4 kg ISI marked 1.00 No 1515.00

87 Excavation for foundation upto 1.5 m depth including sorting out 14.40 cum 117.08

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft soil (SOR page no.41 Item

88 Brick work using common burnt clay building bricks having 20.52 cum 4021.02

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement :6 -fine sand)(B)

Conventional(SOR page no.58 Item code 06002BA)

89 Brick work using common burnt clay building bricks having 13.00 cum 4289.33

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement :6 -fine sand)(B)

Conventional(SOR page no.58,59 Item code 06002BA + 6006B)

90 Providing 15mm thick cement plaster in single coat onRough 153.14 sqm 163.85

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even

and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) (SOR page

no.100 Item code 17002B)

91 Finishing wall with water proofing cement paint of on wall surfaces 153.14 sqm 57.44

(Two coats) to give an approved brand and manufacture and of

required shape even shade after thoroughly brushing the surface to

remove all dirt and remains of loose powered materials. (SOR page

no.104 Item code 18027)

93 LED Screen 1.00 No. 15000.00

Rs. Fifteen Lakhs Twelve Thousands One Hundred Seventy Seven and Fourty Six

I \ We am \ are willing to carry out the work at ………………………% above \ bellow percent ( Should

be written in figures and words ) of the estimated rate mentioned above. Amount of My \ Our tender works

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input

rate mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat (R&B) Division

Dhrangadhra Surendranagar