Janpad Bareilly ke sichai calony main type-1, type-2 evem type-3 ke awason ke nirman ka karya

Amount

Dismantling brick work or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60 m. as per direction of Engineer-in-charge & also including all cost of material, labour & T&P etc. complete.

Earth work in foundation in dry soil including lift up to 1.50 M & lead up to 30 M back filling, waterring and ramming of excavated earth into the trenches and disposal of surplus earth as directed by the Engineer-in-Charge.

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating barrier under and around thecolumn pits ,wall trench basement exavation top surface of plinth filling junction of wall and floor along the external per meter of building expension joints surrounding of pipes and conduit etc. Complete (plinth area of the building at ground floor only shall be measured as per I:S 6313( part ii 1981). Aldrine emulsificable concentrate of any other approved material such as Hepthachlor or chlordance will be used . The rate of application of chemical emulsion shall be as follows.(As per pwd s.o.r chap. no. 8 item no. 1)

Laying C.C. 1:4:8 Mix cement, coarse sand & 20 mm down graded stone grit including cost of all material, labour and T&P etc. complete but excludiing cost of shuttering. (In Foundation & in flooring ).

Laying Brick work C.M. 1:4 Mix cement & coarse sand as directed by Engineer in charge & also including all cost of material, labour & T&P etc.

DPC 25mm Th. In plinth level including water proofing material.

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km . From the site of work & including watering , dressing etc. Rate includes cost of all materials, labour and T&P etc. required for proper completion of the work. (including royalty)

Laying R.C.C. 1:1.5:3 Mix (M-20) cement, coarse sand & 20 mm down graded stone grit including cost of all material, labour and T&P etc. complete but excludiing cost of Centering, shuttering & Reinforcement.

Mild steel or iron in plain work such as a reinforced concrete or reinforced brick work (when not included in an over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastege and over lapping & hooks.

Centring & shuttering for R.C.C. work including cost of centring & shuttering , labour and T&P required for proper completion of work etc.up to 3.0 m height.

12 mm thick Cement Plaster in 1:3 cement mortar as directed by Engineer in charge & also including all cost of material, labour & T&P etc.

12 mm thick Cement Plaster in 1:5 cement mortar as directed by Engineer in charge & also including all cost of material, labour & T&P etc.

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required form, including of supply of steel , bolts, nuts and wastage etc. required for completion of work but of febrication of hold fast nosing hold fast.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)9.5.1 Second class teak wood9.5.1.1 35 mm thick shutters

providing and fixing fly prrof galvanized MS wire gauge to windows and clreastory windows using galvanised MS Wire gauge with average width of aperture 1.4 mm in both direction with wire of dia 0.63 mm (with second class teak wood beading 62x19mmm)

Providing and laying vitrified floor tiles in 60x60 cm size (thickness to be specified by the manufacturer) with water absorption's less then 0.080% and conforming to IS: 15622 of approved make in all colours and shades laid on 20 mm thick cement morter 1:4 including grouting the joints with white cement and matching pigments etc. including all cost of material, labour & T&P etc. complete.

Supply and fixing 6 mm China whaite glaged in flooring or skirting dado laid with 1:3 cement and approved coarse sand mortar finished white cement slurry jointing and polishing complete including supply of all material , labour and T&P etc. required for proper completion of work.

Providing and fixing 18 mm thick gang saw cut mirror polished( premoulded and pre polished) machin cut for kitchen platforms , vanity counters,window sills , facias and similer location of required size of approved shade,color and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 c/sand) with joints treated with white cement , mixed with matching pigment, appoxy touch ups, including rubbing , curing moulding and polishing to edge to give high gloss finishe etc. complete at all levels .(plain white marble/udaipur green marble/zebra black marble.

Wardrobs in rooms and almirah shutter in kitchen(as dsr s.n. 9.130.20)

25 mm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 20 mm graded approved stone shingle laid in panels finished with 3 mm. floating coat of neat cement or cement and marble dust in 5:1 as specified over & including 80 mm. thick base concrete consisting of cement, local sand and brick ballast 40 mm gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T & P etc. required for proper completion of the work.

Providing and laying 25 mm thick kota stone of size 45X45 cmand of flooring over previously prepared base with 2 cm thick 1:3 cement and sand mortar incl filling of joint with cement mixed with pigment reqd for matching the sahde of floor as per direction of Engineer-in- charge incl cutting ,polishing with wax polosh incl supply of all material, TnP etc. reqd for proper completion of work

Three coat of white washing on inside walls and ceiling over one coat of cement primer or base finish

Proving and applying plaster of paris putty 2 mm thickness over plastered surface to propare the surface even and smooth & also including all cost of material, labour & T&P etc. complete.

Finishing walls with water proof cement paint of approved make and quallty on new work with three coats to give as even shade, including supply of all cost of material, labour & T&P etc. required for proper completion of the work.

Three coat of Enamal Painting on flush shutter over one coat of primer base finish.

Distemper three coat with oil bound distemper of approved brand manufacture and required shade on decoreted wall surface to give on even shade over and including a priming coat with cement primer of approved brand and manufacture such as of british, shalimar, asian paints after thoroughly brushing saface free from mortar dropping and other other foreing matter and also including preparing the surface even also shad prepared smooth & including all cost of material, labour & T&P etc. complete.

Providing and laying "Brick coba" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other over 20 mm thick base of cement mortar 1:4 cement and coase sand mixed with water proofing compoundfilled gaps of coba & tap of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall paraper shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour T&P etc. complete for proper comletion of work including all cost of material, labour & T&P etc. complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

Providing wood work in frames of doors windows clerestory window and other frames, wrought framed and fixed in position(second class teakwood

Providing and laying of factory made 80 mm thick interlocking cement concrete tiles (30 mpa) including 25 mm thick compacted bed of fine sand compacting and proper emedding/ laying of interlocking tiles leveling and dressing of surface to required level and slope, filling joints with fine sand including the cost of material,labour t&p etc.

Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre

Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. completea)450 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(DSR 2021 item no 18.9)A)100 mm dia

Same as above B)80 mm dia

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.A)110 mm dia

same as above b)75 mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.A)110 mm bend

same as above b)75 mm bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.A)110 mm

same as above B)75 mm dia

Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Internal work A)25 mm nominal dia

Same as above B)32 mm Nominal bore

Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.a)20 mm Nominal Bore

same as above B)25 mm nominal bore

same as above C) 32 mm Nominal Bore

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :100x100 mm size P type;With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.a) 32 mm dia (semi rigid pipe)

same as above b)40 mm dia (semi rigid pipe)

Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board;510x1040 mm bowl depth 250 mm

Providing and fixing toilet paper holder : C.P. brass

Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms

Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.a) 15 mm nominal bore

Providing & fixing CP brass bib cock of approved quality conforming to IS 8931. a) 15 mm nominal bore

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.a) 15 mm nominal bore

Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931. a) 15 mm nominal bore

Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license].Capacity in per litres

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A

same as above B) Group B

same as above C) Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. A.( 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.)

same as above B-(2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.)

same as above C-(2 X 6 sq. mm + 1 X 6 sq. mm earth wire.)

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.A-5/6 A switch

Same as above B) 2 way 5/6 A switch

Same as above C)3 pin 5/6 A socket outlet

Same as above D)Telephone socket outlet

Same as above E)TV antenna socket outlet

Same as above F)Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.A)1 or 2 Module (75mmX75mm)

Same as above B) 3 Module (100mmX75mm)

Same as above C) 4 Module (125mmX75mm)

Same as above D)8 Module (125mmX125mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.A)1 or 2 Module

Same as above B) 3 Module

Same as above C) 4 Module

Same as above D)8 Module

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing up to two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.

Installation ,Testing, Commissioning of pre-wired,flourescent, compact flourescent, LED fittings of all types complete with accessories and tube/lamp etc, directly on ceiling/wall, including connections with 1.5 sqmm FRLS PVC Insulated, copper conductor single core cable and earthing the same etc.as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation, testing and commissioning of exhaust fan,in the existing opening, including making good the damage, connections etc as required.A)450 mm

Extra for fixing the Louvers/shutters complete with frame for a exhaust fan of all sizes.

Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair (4 core) From LV box to different point

Providing and fixing following rating and breaking capacity and pole MCCB with THERMOMAGNETIC RELASE AND TERMINAL spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.A)100A/63 A,36KA,FPMCCB

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required but without MCB/RCCB/Isolator)A)4 way (4 + 12), Double door

Same as above B)8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.A)Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.A)For 4 way, Double door TPN MCBDB

Same as above B)For 8 way, Double door TPN MCBDB

Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

Making of Earthing with COPPER EARTH PLATE of size 600mmx600mmx3mm thick i/c accessories and providing masonary enclosure with heavy duty Cover plate having Locking arrangement and watering pipe of 2.7 meters etc. with SALT & CHARCOAL as required.

Making of Earthing with G.I.(HOT DIP GALVANISED) EARTH PLATE of size 600mmx600mmx6mm thick i/c accessories and providing masonary enclosure with heavy duty Cover plate having Locking arrangement and watering pipe of 2.7 meters etc. with SALT & CHARCOAL as required.

Providing and fixing 25mm x 5 mm Copper in 40 mm dia G.I.Pipe from earth electrode including connections with brass nut,bolts, washers etc including excavation, refilling etc.as required.

Providing and fixing 25mm x 5 mm GI strip in 40 mm dia GI Pipe from earth electrode including connections with G.I. nut,bolts, washers including excavation, refilling etc as required.

providing and fixing 25x5 MM copper strip on surface or in recess for connections

Providing and fixing 25x5MM GI strip on surface or in recess for connections.

Providing and fixing 6 SWG.G.I.Wire on surface or in recess for loop earth along with existing surface /recess conduit/ submain wiring/ cables etc.as required.

Laying of 1 No. PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation,sand cushioning,protective covering and refilling the trench etc. as required.A)Upto 35 sqmm

Above 35 & upto 95 sqmm.

Laying of 1 No. PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size in existing RCC/HDPE/METAL pipe etc. as required.A)Upto 35 sqmm

Same as above B)Above 35 & upto 95 sqmm.

Laying of 1 No. PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size in existing masonary open duct/cable Trays etc./on wall surface as required.A)Upto 35 sqmm

same as above B)Above 35 & upto 95 sqmm.

supplying and making Indoor cable end termination with Brass Compression Glands and ALUMINIUM LUGS complete with all accessories suitable for following size of PVC insulated,PVC Sheathed/XLPE, Aluminium conductor cables of 1.1KV grade as required.A)3.5 Core X 50 Sqmm.

Same as Above B)4 Core X 16 Sqmm.

Same as above C)4 Core X 10 Sqmm.

Same as above D)4 Core X 6 Sqmm.

Supplying & Laying of following size of DWC HDPE pipe ISI Marked along with all accessories like Socket, Bend,couplers etc. confirming to IS 14930, part II, complete with fitting and cutting, jointing etc, direct in ground (750MM) Below ground level including excavation and refilling the trench but excluding sand and protective covers etc complete as required. 200 mm dia (OD-200 mm & ID-175 mm nominal )

Supply of LT XLPE Cables of 1.1 KV Grade,Aluminium Armoured,of following sizes as per latest IS Code.A)3 core 70 mm. sq.

M/S KANISHK INFROLOGISTICS PVT LTD

M/S RAJEEV TRADERS

SWAROOP CONSTRUCTION

M/S UNITE ENTERPRISES