Urgent Repairing Work Electrical Installation of various site before Gangasagar Mela-2026 under PW(Roads) Dte., at Sagar Island.

Amount

LED Sign Board: Dismantaling of LED Sign Board of Sagar Balaka Bungalow , Kachuberia ferry Ghat & Transhipment office Building from structure take down it for repairing and again refixing the board in existing structure by scaffolding after repairing.

Supply & fixing of I/P-240 V O/P-12 V , 1.5 watt LED with Damaged one by dismentalling the letter of the LED board of transhipment office and refixing the letter on acp board By chloroform/glue/screws by etc co's own tools.

Fixing of new Letter in replacement of broken one and fixing it by spl. Type glue solution with exixsting size front of ACP Board.

Cost for Cleaning Condenser, Cooling coil, Runner & Air fitter by Co's own special tools & tackles with special chemical & Jet Pump.

Extra muffing on above, for providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 20cmx15cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole, as per GS

Supply & Delhivery 1.1 KV Gr, 2Cx6 sqmm XLPE Al. Ar. Cable (Make-Havells/ Polycab/Crystal/Gloster)

Laying the above cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, incl. filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed as per GS.

S&F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 2Cx6 sqmm XLPE/PVC armoured cables, incl. Finishing the end of above XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing material, as per GS

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: a) By ISI-Medium GI pipe

Excavation of soil for installation of Earth Electrode and filling & ramming, for Soft Soil, as per GS.

S&F earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required, as per GS.

Connecting the equipments to earth busbar including S&F 2x8SWG GI (Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as reqd. & mending good damages as per GS.

Painting of any steel/ iron surface with 03 no. of coats of paints as --One coat of red lead/Zinc chromate priming then 1st coat of synthetic enamel paint over the primer after that 2nd coat of synthetic enamel paint over the 1st coat with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint, as per GS

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following Size. a)3 x 22/0.3 (1.5 sqmm)

Supply and fixing of 240 V 25/30 watt outdoor led light in existing fittings by clamp & fastner in wall at sagar balaka premises at its existing place

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

Lowering and refixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. making necessary disconnection and connection as required, in as per GS.

Cleaning of fitting fixtures outdoor and indoor luminaries and refixing them as per direction of EIC.

Cleaning & Proper dressing of all Electrical DB Box including checking of proper load distribution By as per direction of EIC by Co's own tools.

Cleaning & Proper dressing of all Main Switches and main panel board including checking of proper load distribution as per direction of EIC by Co's own tools.

Supply & Charging of Refregerant R-410A / R-32 Gas at different site.

Cost for Changing Condensor unit & Repairing of Leakgae Coil with proper tools & tackles as direction of EIC.

Dismantling charges for the ODU & damage compressor, re-installation of new compressor , System Re-Operation ,Gas Flashing, after S/dressing, Welding of Copper Pipe Jointed line, Gas Pressure with nitrogen (N2) Leakage Testing, Making High Vacuum For Gas Charge as per direction of EIC.

Note: 1) All the above rates should be quoted inclusive of all taxes, duties and all ancilery charges. 2) Total is rounded off to the nearest rupees.

G.G. PROJECT (BID ID -7544454)

M/s MONDAL ELECTRIC (BID ID -7478663)