WBPHED/AEII/MLMD/Niet_07

Supply & delivery at site of 9mtrs long steel tabular pole with sole plate as per direction of EIC (Designation- 410 SP-26.(Over all length-9.00mtr, planting depth- 1.5mtr, Length of section)(Bottom-5.0mtr, middle- 2.0mtr, Top- 2.0mtr,) Outside Dia & Thickness of Section(Bottom-114.3x4.50mm, Middle-88.9x4.05mm, Top- 76.1x3.25) Approx Weight of Pole-92Kg)including supply and fixing of single arm header of 40mm dia 1.5 m long CI base plate and cap etc.

Erection of 9 Mtr Single Steel tubular pole of length as given below with sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x750 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.50 mt. above ground level including 2 mm thick neat cemented finish and GI earth bolt and earthing arrangement by 8SWG GI Wire,after making drilled holes etc. on pole including filling up the excavated earth pit with shifted soil and ramming properly.

Supply & Laying of 1.1 KV Gr. 2 core 6 sq.mm XLPE Armored Alu. Cable(Approved make) on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting as directed by EIC. [Measurement will be taken as per site requirement]

Supply & Laying of 1.1 KV Gr. 2 core 6 sq.mm XLPE Armored Alu. Cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [Measurement will be taken as per site requirement]

Supplying and fixing 2+4 way SPMCB with 40A DP Isolator-1no & 6-32 Amp-3-nos 240/415 V MCB of Breaking capacity 10kA & B characteristics with MCB enclosure and necessary connection as per direction of EIC.(Approved make)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry 1.1 KV Gr. 2 core 6 sq.mm XLPE Armored Alu. Cable incl. Finishing the end of the same by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials as per direction of EIC.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of 3 x 22/0.3 (1.5 sqmm)(Approved make) through GI pipe and making necy. connection as required as per direction of the E.I.C (From pole loop box to LED fittings).

Supplying and Fixing 250 x 250 x 100mm GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement with required GI Pipe for cable laying from ground to loop box, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 6A SPMCB unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting as directed by EIC.

Supply and fixing of street light luminarie IP 66 LM6-HPDC Housing Street light aerodynamically designed with better thermal management/ Potted driver is to be provided,the luminaire and housing should be from the same manufacturer(cat no-BRP 062 LED 84 CW SLC S1 PSU) Make-Philips OR Equivalent and same techinal specification . Each Fixure is to be earthed with the erected steel tabular pole.

Painting all the single arm G.I brackets, poles, pipes etc. with 2 coats of Synthetic Enamel paint over 1 coat of Red Oxide primer after cleaning and preparation of surface by emery paper all complete as per direction.