EI works for newly constructed on duty restroom Male and Female Doctors at the old building Nabadwip SGH

Amount

Supplying and fixing of 415 V, 32 A per way, double door, 8-way HTPN MCB Distribution Board with IP-43 protection (Make - Legrand / ABB Elegance / Schneider / Siemens), concealed in wall after cutting the wall & mending good the damages to original finish incl. interconnection with suitable size of copper wire and neutral link & provision for earthing attachment

S & F of 240 V, 6-16 A per way, (2+10) way double-door SPN MCB Distribution Board with IP-43 protection (Make - Legrand/ABB Elegance/Schneider / Siemens), concealed in the wall after cutting the wall & mending well the damages to original finish incl. interconnection with suitable size of copper wire and neutral link & provision for earthing attachment.

S & F of following 415/240 V, FP/DP, MCB type Isolator (Make - Legrand / ABB / Schneider / Siemens) on din rail of SPN DB and necessary connection.

S & F of 240 V, 6/10/16/20/32 A SP MCB of breaking capacity 10 kA & C characteristics (Make - Legrand / ABB / Schneider /Siemens) on din rail of HTPN / SPN DBs and necessary connection.

Distribution wiring in 1.1 KV grade 3 X 1.5 sq. mm single core stranded 'FR' PVC insulated & unsheathed copper wire (Make - Finolex/RR Kabel / Havells/Polycab) partly in 20 mm size MMS PVC rigid conduit 'FRLS' (Precision) [for ceiling portion only] and in 19 mm bore, 3 mm thick polythene pipe [for horizontal & vertical run embedded in wall] to light/fan/call bell points with Piano Key type switch (Anchor) fixed on MS CRC sheet metal (16 SWG) switchboard on wall complete with 3 nos. suitable size “Ph, N & E” copper bar incl. bakelite/ perspex top cover 3 mm thick and incl. 175 mm x 100 mm x 65 mm inspection box, making earthing attachment, painting the MS box and mending well the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed). Average run - 6 Mtr.

Distribution wiring in 1.1 KV grade 3 x 1.5 sq. mm single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Make - Finolex/RR Kabel / Havells/Polycab) in 20 mm size MMS PVC rigid conduit 'FR' (Precision make) to 6 A flush type plug socket & Piano Key type switch (Anchor) fixed on MS CRC sheet metal (16 SWG) switchboard cum JB on wall incl. bakelite/perspex (wall matching colour) top cover 3 mm thick and incl. painting the MS box and mending well the damages to original finish. On Board -

S & F of 240 V, 6 A plug socket - 2 nos. with separate 6 A switch (Anchor) - 2 nos. on SM switchboard embedded in wall incl. S & F 175 mm x 100 mm x 65 mm MS (16 SWG) switchboard and bakelite top cover of 3 mm thick by brass screws after making housing for the switch by cutting bakelite cover and making necessary connections as required.

S & F of 240 V, 20 A plug socket with separate 20 A Piano key type switch (Anchor) on sheet metal switchboard embedded in wall incl. S & F 150 mm x 100 mm x 65 mm MS (16S WG) switchboard and bakelite/perspex top cover of 3 mm thick by brass screws after making housing for the switch by cutting bakelite/perspex cover and making necessary connections as required.

S & F of 240 V, 3 nos. 6 A & 1 no 20 A plug sockets with separate 3 nos. 6 A & 1 no. 20 A piano key type switches with indicator & 16 A kit-kat fuse unit (Anchor) on sheet metal switchboard embedded in wall incl. S&F of 240 mm X 200 mm X 65 mm MS (16 SWG) switch board and bakelite top cover of 3 mm. thick by brass screw and making necessary connection as required. ( Computer Board )

Distribution wiring in 1.1 KV Gr. single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Make - Finolex/RR Kabel / Havells/Polycab) in 20 mm size MMS PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required -

3 x 1.5 sq. mm

2 x 2.5 sq. mm + 1 x 1.5 sq. mm

2 x 4 sq. mm + 1 x 2.5 sq. mm

2 x 6 sq. mm + 1 x 4 sq. mm

Supply and delivery of 1.1 kV Gr. 4 Core 35 sq. mm PVC/XLPE insulated & sheathed Armoured Aluminium Conductor Cable (Make - Polycab / Havells / Universal / RR Kabel)

Laying of 1.1 kV Gr. 4 Core 35 sq. mm cable, after cutting floor/pavement/wall/ and making holes including embedding the cable at an average depth of 75 mm and mending good the damages to original finish incl. removing the rubbish

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 4 Core 35 sq. mm XLPE/PVC armoured cables.

Finishing the end of 4 Core 35 sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

Finishing of the following PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets and tapes. [9/F-5]

3 x 1.5 sq. mm

2 x 2.5 sq. mm + 1 x 1.5 sq. mm

2 x 4 sq. mm + 1 x 2.5 sq. mm

2 x 6 sq. mm + 1 x 4 sq. mm

Supply & Fixing angular batten holder (Anchor) on 75 mm dia PVC round block / round bakelite on wall/ceiling incl. S&F 9 Watt LED lamp Philips make.as per the direction of EIC.

Supply of box type, 4 ft. long, single T-8 LED tube light fittings complete with all accessories [Make - Phillips, Cat No. - TMC 502 P 1 x T-LED 22 W / Crompton, Cat No. IGP161 LT8-16/Wipro, Cat No. WIO912208].

Supply of box type, 4 ft. long, twin T-8 LED tube light fittings complete with all accessories [Make - Phillips, Cat No. - TMC 502 P 2 x T-LED 22 W / Crompton, Cat No. IGP162 LT8-16/Wipro, Cat No. WIO922208].

Supply of 4 ft. long 18/20 Watt, polycarbonate LED T-8 lamp (Make - Philips Master LED tube model no. 18W 865 T8 I 2100 lm / Wipro, Cat No. LL13-181-65SESL / Crompton cat no. LTT8-20].

Fixing only single/twin LED light fitting suspended 25 cm bellow the ceiling with 2 nos. 20 mm dia EI conduit (16 SWG) supports fixed with “L” type (65 +75) mm (length) x 25 mm (width) x 3 mm (thick) MS clamp whose one side fixed on ceiling with suitable size 4 nos. fastener and other side connected with the conduit with suitable size 4 nos nut-bolt and making connection by PVC insulated stranded copper wire (3 x 1.5 sq. mm up to 1 mt. length through the polythene pipe) with mending good damages to original finish incl. S&F the fixing materials, panting etc as required. NS

Supply and delivery of 230 V 1200 mm sweep ceiling fan (28 Watt or less BLDC fan, class of insulation -'B', SERVICE VALUE (CMM/W min 6.85, R.P.M. 350(min), THD <10%, supplied with remote control or wall mounted speed regulator, P.F. not less than 0.9, bult in 2.5KV SPD with complete accessories[Make: Usha, Crompton, Bajaj, Atomberg, Havells, Orients, CG, RR or equivalent] as per direction of EIC.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod up to 30 cm incl. painting the rod with approved paint and making necessary connection as required by 3x1.5 sq. mm flexible copper wire.

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supply & delivery 240 V, 50 Hz, 9" (23 cm) sweep, 1375 RPM, metal body, heavy-duty exhaust fan (Make -- EPCElectrical Pvt. Ltd.)

Fixing only a 9" (23 cm), exhaust fan after making a hole in the wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making the connection for exhaust of following dia incld. Supply & Fixing Al louvre shutter on the wall with necy. bolts & nuts (6 mm dia x 62 mm long)

S/F OLP - 240 V, 30A A.C Starter suitable with G.I box flushed in wall with voltage check, Amp check, Time check incl. all connection.

Supply & Fixing 240 V, 25 A, 3 pins Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switchboard with top cover plate flushed in the wall and making necy. connections with PVC Cu wire and earth continuity wire etc. as per G.S.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Supplying and fixing 415 V, 100 A TPN SFU (Make - Siemens/L&T/Havells) with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.

Supply, delivery & installation of 240 V, 12-way, double door, SS enclosure, powder coated, IP-43 protection Timer DB with neutral bar, Din Rail and comprising with 1 no. 20/25 A DP MCB ('C' Curve, 10 kA,), 1 no. 24-hour digital Time Switch, 1 no. 20/25 A DP contactor, 1 no. 20/25 A AC Starter (Make - ABB/ Schneider/ Legrand) & internal wiring by suitable size 2.5/4.0 sq. mm single core stranded copper wire, 1 no. Auto Mannual bypass Toggle Switch, provision for earthing attachment, LED indication light on on-off condition. (For AC Machine)

Excavation of soil for installation of Earth Electrode and filling & ramming for soft soil.

Earthing with 50 mm dia GI pipe (Tata Medium), 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required as to GS.

Connecting the equipments body to earth busbar including S &F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe as to GS.

Dismentling the existing E.I. work incl existing defective , non functioning Fan.Tubelights,Exh. Fans,AC machines etc by Co's own tools & tackles by maintening normalcy as far as possible as per direction of EIC.

ARUP SARKAR AND CO. (BID ID -5653637)

RAJ AND ENTERPRISE (BID ID -5653703)