TENDER FOR RENOVATION AND RETROFITTING WORK IN EXISTING TOILET BLOCK IN VARIOUS AREA OF BORIAVI NAGARPALIKA.

Total Amount Rs.

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor Chief Officer

Boriavi Nagarpalika

SECTION-7 BILL OF QUANTITIES-222

BORIAVI MUNICIPALITY, BORIAVI

NAME OF WORK :- ESTIMATE FOR RENOVATION WORK OF TOILET BLOCK AT BORIAVI MUNICIPALITY

BUILDING AT BORIAVI

Item Qty. Description Total Unit Amount

1 80.30 Dismentaling tiled or stone floors laid in mortar including

Smt stacking of serviceable materilas and disposal of unserviceable

material with all lead and lift..

2 7.00 Dismentling doors, windows, ventilators etc (wood or steel)

Each shutters including chowkhats, architraves, holdfasts and other

attachment etc, complete and stacking them within all lead and

lift. (i) Not exceeding 3 Sq. m in area

3 8.00 Dismentling santtary fittings like wash basin W.C. pan, indian

Nos and European type, flushing tank etc. Including stacking the

materials with all lead and lift. 414.23 no

4 56.23 Removing dry or oil bound distemper by washing and scraping

Smt. and sand papering the wall surface smooth including necessary

repairs to scratches complete.

5 15.50 Removing dry or oil bound distemper on ceiling and sloping

Smt. roofs by washing and scraping and sand papering the wall

surface smooth including necessary repairs to scratches

complete. 13.21 Smt.

6 2.40 Providing and fixing 35mm thick shutters for doors, windows and

Smt. clear Story windows including black enamelled M.S. butt hings

with necessary screws (A) Indian teak wood. (i) Fully panelled.

(upto 10 ton) 3773.84 Smt.

7 3.20 Providing and fixing FRP frame size 125 x 65 mm and 35 mm

Smt. thick FRP shutter with wood grain raised panneled design finish

shutter having extra reinforcement on side & edges in Gel coat

finish. The core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges & fintures. The

whole FRP frame & Shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkhli. Rates are to be

inclusive of S.S.hinges with fastener Sleeve & alluminium

fixtures & fastenings. 2019.98 Smt.

SBD SECTION-7 BILL OF QUANTITIES-223

8 0.90 Providing and fixing glazed louvered glass windows and

Smt. ventilators with teak wood frame 10cm x 7cm size including

Coats of oil painting to wood work etc. complete.(upto 10 ton)

9 22.50 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts and

nuts or by screws. (B) Plain Grills

10 2.00 Providing 10mm thick cement plaster in single coat on

Smt. brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-

sand).Extra over items 58 to 64 for finishing with a floating coat

of neat cement slurry.Extra over items 58 to 71 for plastering on

ceilings and sofits of stairs upto floor two level instead of

plastering on walls.

11 6.00 Providing and Laying 20 mm thick sand face cement plaster on

Smt. Walls upto height of 10 mts. Above ground level consisting of

12mm thicjk backing coat of C.M 1:3 (1 Cement, 3 Sand ) and

mm thick finishing coat of C.M 1:1 (1 Cement, 1 Sand) etc.

complete. 352.44 Smt.

12 15.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer

coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and even shade free from

foreign matter and also including preparing the surface even and

13 56.78 Finishing wall with water proofing cement paint on wall surface

Smt. (three coats) to give an approved brand and manufactures and

of required shape even shade after throughly brushing the

surface to remove all dirts, and remians of loose powdered

material. 93.21 Smt.

14 8.00 Providing & Laying 24 "x 24" vitrified 8 mm thick tile flooring over

Smt. 20 mm ( average) base of cement mortar 1:6 (1: cement :

coarse sand ) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring and

jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for antiskit . (upto

10 ton) 1467.72 Smt.

15 3.00 Providing and laying white glazed tiles 6mm thick in flooring,

Smt treads of steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1 Cement : 3 Coarse Sand) finished with flush

pointing in white cement. 953.74 Smt.

SBD SECTION-7 BILL OF QUANTITIES-224

16 54.50 Providing and laying white glazed tiles 6mm thick in skitring

Smt risers of steps and dado on 10mm thick cement plaster 1:3 (1

cement : 3 coarse sand) and pointing in white cement jointed

with white cement slurry.

17 1.00 Providing and fixing wash down water closet European type

Nos. W.C. Pan with integral "P" or "S" trap and PVC flushing cistern

with a pair of C.L.I. or Mild Steel Brackets, complete with fittings

such as lead value siphon, 15mm nominal size brass ball value

with polythene float, C.P. Brass handle unions and couplings for

connections with inlet, outlet and over flow pipes, 40 mm dia

flush bend including cutting holes in walls and making good the

same connecting the flush bend with cistern and closet etc.

comp. incl plastic sheet cover including jointing trap with pipe in

C.M. 1:1 ( Cement : 1 fine sand) (a) Viterous China - (i) In White

Color. 1984.65 No.

18 1.00 Providing and fixing water closet squatting Pan (Indian type W.C.

Nos. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap

to be measured and paid for separately) (A) Vitreous China.(I)

Long pattern = White colour

19 2.00 Providing and fixing chromium plated brass half turn flush cock

Nos. of approved quality including fixing in pipe line etc. complete. (ii)

20 4.00 Providing and fixing 15mm. Dia C. P. Brass screw down bib cock

Nos. of approved quality including fixing the same in pipeline and

testing etc. complete as directed by Engineer-in-charge.

21 2.00 Providing and fixing 15mm. Dia C. P. Brass stop cock of

No. approved quality including fixing the same in pipeline and testing

etc. complete as directed by Engineer-in-charge.

22 1.00 Providing and fixing gun metal chek or non return fullway wheel

No. valve. (A) 15 mm Dia. 186.83 No.

23 2.00 Providing and fixing 100 mm dia sand cast iron grating for gully,

No. floor or nanhi trap. 36.98 No.

24 1.00 Providing and fixing 150mm x 100mm size "P" or "S" type square

No. mount stone ware gully trap with c. I. Grating brick masonry

chamber and water tight C. I. Cover with frame of inside 300mm

x 300mm size with cutting and making good the walls floors etc.

complete as directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-225

25 1500.00 Supplying And fixing PVC water tank of ISI make including

Lits. delivery at site, supply and fixing inlet, outlet, overflow, ballcock,

drainage sleeves of specific size, with necessary neoprene

gasket / packing / washer, G.I.washer, and checknut etc. compt

as directed on terrace,loft,bathroom etc in any height.The rate

shall be include for fixing additional accessories supplied by

supplyer accessories. 3.95 Lit.

26 2.00 Providing and fixing white viterous china flat back wash basin of

No. 550mm x 400mm size with single hole for pillar tape with C.I. or

M.S. brackets painted white including cutting holes and making

good the same. Rates including providing and fixing 32mm dia

C.P. Brass waste couplin, 32mm dia M.I. Fisher unit, Brass

screw down stop tap of 15mm dia pillar tap capstan head, screw

down high pressure with screws, shanks, back nuts, PVC pipe &

32mm dia flexible waste pipe up to Nani Trap etc. complete as

directed by engineer in charge.

27 4.00 Providing and fixing 430mm x 260mm x 350mm size white

Nos. earthen ware flat back or corner type urinal of approved quality

including. Connections the urinal with waste pipe, stop tap etc.

28 1.00 Sanitary Napkin Vending VND25M

Nos. 5050.00 No.

29 1.00 Sanitary Pads Incinerator SD-50

Add 18% for GST

Add 2% for Contingencies Charge Rs

Add 1% for Quality control Charge Rs

SBD SECTION-7 BILL OF QUANTITIES-226

BORIAVI MUNICIPALITY, BORIAVI

ELECTRICAL INSTALLATION WORK & RENOVATION WORK FOR TOILET BLOCK AT BYPASS ROAD AT BORIAVI

Item Qty. Description Total Per Amount

1 ELECTRICAL INSTALLATION WORK

1 13.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

Pts. (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / on surface on wall / ceiling complete with 6A Modular

Type switch / bell push & accessories and earth continuity of following

type, erected on PVC / Metalic box, single mounting base frame

covered with textured / metalic front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose/H.D. Connector as directed. (b) with 16 swg HGS metal conduit

pipe and accessories painted black. Cat-II.

2 1.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

Pts. (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / on surface on wall / ceiling complete with 6A Modular

Type switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories earth continuity of

following type, erected on PVC / Metalic box, single mounting base

frame covered with textured / metalic front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose/H.D. Connector as directed. (b) with 16 swg HGS metal conduit

pipe and accessories painted black. Cat-II.

3 Point wiring for Individual Plug with 1.5 sq.mm & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in / on surface on wall / ceiling complete with

Modular Type switch and 5 pin Plug erected on PVC / Metalic box

covered with appropriate front plate modules erected on / in wall /

ceiling as per pipe erected, with following type of accessories.

a. 1.00 [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire. (b) with 16 swg HGS

Pts. metal conduit pipe and accessories painted black. Cat-II. For Main

Board. 545.40 Pt.

b. 1.00 [II] For 6A Plug with 2-2.5 sq.mm Cu. Wire. (b) with 16 swg HGS

Pts. metal conduit pipe and accessories painted black. Cat-II. For

Domestic Plug Point. 785.78 Pt.

SBD SECTION-7 BILL OF QUANTITIES-227

4 55.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Meter Copper conductor wire in following type of pipe to be erected concealed

in / flushed on wall / ceiling, with 1.5 sq.mm copper conductor

FRLSPVC insulated stranded wire of green colour for earth continuity

of following size. (a) with medium class Rigid PVC pipe and

accessories (a) 2 wire 2.5 sq.mm. 62.62 Mt.

5 5.00 Approved make CFL Retrofit 5/7/9/11 Watt erected if required. Cat-III

Nos. 121.20 No.

6 2.00 Providing and erecting metalic vitrified danger notice board for Medium

Nos. Voltage installation to be erected as per IS.

7 3.00 Providing and erecting 240 V MCB double pole switch for motor &

Nos. inductive load (C Curve) having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having folowing capacity. (A) 6 to 32 Amp.

Cat-II. 277.75 No.

8 Providing and erecting Sheet Steel powder coated MCB distribution

board-flush / surface mounted fitted with busbar, neutral link, earth bar

and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to

house appropriate nos. of MCBs. (The DBs should be used of same

company of MCB to be used).

1.00 (B) Single Phase 4 way SS Double door.

Nos. 545.40 No.

9 6.00 Providing and erecting Approved make 1x36/40 Watt sleek batten type

Nos. fluorescent fitting with tube complete with Electronic ballast assembly

housed in engineering plastic covers with tube, holders, erected with

necessary lead wire & hardware materials and adapter if required. Cat-

10 1.00 Supplying and erecting 19/20mm nominal bore Medium Class M.S.

Meter Pipe down rod erected duly painted for fan complete with necessary

24/0.20, 3 core flexible wire with earthing. 126.25 Mt.

11 2.00 Supplying and erecting Fan Hook of 10mm M.S. Round bar grouted in

Nos. RCC Slab with making the site as original. 50.50 No.

12 2.00 Providing 2.5mm thick laminated acrylic sheet to cover the fan hook or

Nos. fan box. 20.20 No.

SBD SECTION-7 BILL OF QUANTITIES-228

13 1.00 Supplying & erecting funnel type earthing having earth plate of following

No. size burrid in specifically prepared earth pit 3 mtr. below ground with

40 kg. charcol and salt with alternate layers of charcol & salt,

20mm.dia. G.I. pipe with Funnel with a wire mesh for watering & bricks

masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with

necessary length of double G.1 / copper earth wire No 6 SWG bolted

with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long

complete connected to the nearest switch gear with end socket as per

direction & duly tested by earth tester confirming to ISS (As per

drawing)with following specification.

(C) with 60 x 60x 0.315 cms. Copper earth plate 9292.00 No.

14 6.00 For using salt and charcoal/coke as required for pipe type earthing.

Nos. 202.00 No.

15 1.00 Sanitary Napkin Vending VND25M

Nos. 5050.00 No.

16 1.00 Sanitary Pads Incinerator SD-50

2 RENOVATION WORK

17 189.88 Removing dry or oil bound distemper by washing and scraping and

Smt. sand papering the wall surface smooth including necessary repairs to

scratches complete. 11.53 Smt.

18 58.50 Removing dry or oil bound distemper on ceiling and sloping roofs by

Smt. washing and scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete.

19 14.00 Painting two coats (Excluding Priming Coat) on new steel and other

Smt. metal surface with synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

20 19.00 Providing 15mm thick cement plaster in single coat on on rough

Smt. (similar) side of single or half brick walls for interior plastering and

finished even and smooth in. Cement Mortar 1:4 ( 1 Cement : 4 Sand)

and finishing with a floating coat of neat cement slurry for above floor

two level. 127.87 Smt.

21 6.00 Providing 10mm thick cement plaster in single coat on ceilings and

Smt. soffits of stairs for interior plastering and finished even and smooth in.

Cement Mortar 1:3 ( 1 Cement : 3 Sand) and finishing with a floating

coat of neat cement slurry for above floor two level.

22 8.00 Providing 20mm thick sand faced cement plaster on wall up to height

Smt. 10 metres above ground level consisting of 12mm thick backing coat of

C.M. 1:3 (1 Cement ; 3 Sand) and 8mm thick finishing coat of C.M. 1:1

(1 Cement : 1 Sand) etc. Complete.

SBD SECTION-7 BILL OF QUANTITIES-229

23 248.50 Applying two coats of Birla (White Cement based) or Asian acrylic

Smt. lappy (putty) or equivalent & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand Papered smooth. 40.59 Smt.

24 190.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat with

alkali resistance primer of approved brand after throughly brushing the

surface free from other foreign matter and also including preparing the

surface even and sand papered smooth.inside

25 58.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on Ceiling &

Sloping Roof surfaces to give and even shade over and including a

primer coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and free from other foreign

matter and also including preparing the surface even and sand papered

26 77.00 Finishing wall with Weather Proof Acrylic Exterior Emulsion Paint on

Smt. wall surface (two coats) to give and required shape even shade and of

approved brand and manufacturer after throughly brushing the surface

to remove all dirts, and remians of loose powdered materials etc.

complete. 120.26 Smt.

Add :- 18% GST Rs.

Add :- 2% of Contingency Charges Rs.

Add :- 1% of Qaulity Controll Rs.

SBD SECTION-7 BILL OF QUANTITIES-230