Karnataka

To Be Opened

Works

Roads

FOUR LANE IMPROVEMENTS OF THARIKERE- VV PURA- DHARMAPURA(SH-24) ROAD FROM CH 50.80 KM TO 51.80 KM (IN SELECTED REACHES) AND CONSTRUCTION OF DECK SLAB TO CONNECT KSRTC DEPO IN HOSADURGA TALUK

Public Works Department

PWD Division Office Chitradurga | CHITRADURGA, Karnataka

Amount: ₹7.7 CrCloses: 14 Aug 2026Closed

Timeline

Published29 Jul 2026
Pre-Bid Meeting10 Aug 2026
Closed14 Aug 2026
Bid Opening17 Aug 2026

Tender Value

₹7.7 Cr

EMD Value

₹11.5 L

Closing Date

14 Aug 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EE PWD CTA

Office Number

Work Description

FOUR LANE IMPROVEMENTS OF THARIKERE- VV PURA- DHARMAPURA(SH-24) ROAD FROM CH 50.80 KM TO 51.80 KM (IN SELECTED REACHES) AND CONSTRUCTION OF DECK SLAB TO CONNECT KSRTC DEPO IN HOSADURGA TALUK

Tender Information

Tender ID

PWD/2026-27/RD/WORK_INDENT38045

Reference Number

PWD/2026-27/RD/WORK_INDENT38045

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Chitradurga

Source Website

Subscribe to view

Documents Required

11 documents required · 11 mandatory

Technical Bid

RequiredThe Tender should have a valid KPWD Registered Class-I contractor.

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 3.2 a achieved in at least two financial years a minimum financial turnover of Rs. 1537.79 Lakhs, in all classes of Civil Engineering Construction works only Balance sheet & Profit & Loss Account indicating contract receipts issued by the competent accountant / Authority with UDIN number

RequiredTo qualify for Award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 3.2 b satisfactorily completed as prime contractor, at least one similar work such as Improvements and Asphalt road work of value not less than Rs. 384.45 lakhs. Work done Certificate issued by competent Authority of rank not less than Executive Engineer.

RequiredThe Tenderer should have executed in any one year in the last five years i.e. 2021-22 to 2025-26 3.2 c the following minimum quantities of work 1. EWE / Embankment/Subgrade- 8981.29 m3 2. PCC/RCC - 2280.18 m3 3. TMT Steel -93.62 t 4. GSB/ WMM - 3797.52 m3 5. BM/DBM/BC/SDBC - 851.64 m3 Work done Certificate issued by competent Authority of rank not less than Executive Engineer.

RequiredList of machinery to be owned 1. 40/60 TPH capacity Hot Mix Plant- 1No. 2. Mechanical paver finisher-1 No.3. Batching Plant- 1 No. 4. Tipper- 3 Nos. 5. Vibratory Roller- 1No 6. Excavator- 1 No. 7. Water Tanker-2 Nos. 8. Machine Concrete Mixer- 02Nos Ownership, saledeed, Registration certificates, Delivery invoice attested by Notary

RequiredList of machinery on own OR Hire OR Lease Basis 1. Static Road Roller- 1No 2. Tipper- 3 Nos. 3. Water Tanker-2 Nos 4. Vehicle Mounted Mechanical Sprayer-1 No 5. Excavator- 1 No. 6. Machine Concrete Mixer- 01 No. 7. Motor Grader - 1No 8. Pug mill - 1No 9. Transit Mixer- 2 Nos Ownership, saledeed, Registration certificates, Delivery invoice, lease hire document attested by Notary

RequiredEach tenderer should further demonstrate 3.3 b liquid assets and / or availability of Credit facilities of not less than Rs. 230.67 Lakhs Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc.,

RequiredEMD for Rs. 100000.00 shall be paid through KPPP and the Balance of Rs.1053400.00 by Bank Guarantee issued by Nationalised/Scheduled Bank or demand draft/bankers cheque/specified small savings instruments online/ or offline modes of e-payment. bidder should upload the scanned Copy of such original document issued by Nationalised/Scheduled Bank IN KPPP. The bidder has to submit the uploaded original Bank guarantee or other documents which described above before entering the agreement if awarded.

RequiredStatement 3.6 indicating the A Existing commitments and ongoing works, B Details of works for which tenders are already submitted . The statements should furnished as per statement 1.5 A ,B of Section 3 of Qualification information in Standard Bid document.

RequiredName, address, and telephone, telex, and fax numbers of the Tenderers may provide references if contacted by the Employer.

RequiredGST Declaration Certificate

Eligibility Criteria

In the Sanctioned Estimate, the item rates are showing inclusive of all applicable taxes but it is to be noted that rates are exclusive of taxes (GST).

Estimate rates are excluding GST as per Common SR 2023-24 continued to 2026-27 and prevailing GST (18% of Amount Put to tender) amount is kept in the form of Lump sum in sanctioned estimate according to guidelines in Common SR 2023-24 (As per the circular from Govt of Karnataka no.12/2024 Bengaluru dt:09.08.2024). Therefore, Amount put to Tender and ECV amounts are excluding GST even though it is showing inclusive Tax in Draft Tender Schedule Process. Hence, GST will be paid separately for the quoted amount accordingly. The bidder has to quote the rate exclusive of GST and to submit a declaration which is duly signed by the bidder along with their tender proposal.

Tenders from Joint ventures are not acceptable.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The contractor shall submit the details of technical staff employed by him.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The cost of the Tender form shall not be refundable.

The employer is not responsible for any delay in accessing Karnataka Public procurement (KPP) portal.

Royalty on construction materials and other applicable taxes will be deducted as per prevailing Government orders.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incidents happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

The item rates quoted shall include cost of royalty charges on construction materials and other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts, labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

Further particulars, if any queries required to the Contractor, they can get from the office of the concerned Executive Engineer, PWD Division, Chitradurga during office hours on all working days.

Contractor should follow strictly the prevailing rules of labour act.

The Tenderer should furnish all necessary original documents mentioned in the bid document to the Executive engineer at the time of verification of documents during Technical Bid evaluation

The intending bidders are requested to note that they should abide by the instructions and conditions contained in the bid documents and further orders thereon.

Contractor has to upload the valid EPF registration copy.

The successful bidder has to follow the prevailing Government orders regarding Royalty Charges. The Contractor has to submit MDP Certificate along with the running contractor bills. Otherwise Department will take necessary action as per the Government Orders/Circulars.

Increase in GST shall not be paid in the extended period of contract.

As per Karnataka state Government order LD.300.LET.2006 Bangalore dated 01.01.2007 and Government letter no PW.134.BMS.2007 dated 27.07.2007 a sum amounting to 1 Percent of the bill amount will be deducted towards constructions labour welfare fund.

Contractor should take all precautions to ensure that no damage is caused to the existing works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified on his own risk and cost.

Materials like bitumen, steel and cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the Quality Assurance Authority before commencement of the work.

Work shall be carried out according to relevant IS/IRC codes specifications depending on type of work.

The bidder has to establish field laboratory at the work site as per GO No:PWD/243/SEV/2013 Bengaluru dated:22.07.2014.

The Defect Liability period for this work is 2 years and 3 years of maintenance after completion of DLP of 2 years as per provisions made in the tender.

The contractor has to quote the same rate to the same items of work that is to be executed at different chainages. If in case, the contractor quotes different rates for the same item appearing at different places of BOQ then, the lowest quoted rate for the same items will be considered for that particular item for evaluation and payment.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

To qualify for Award of this contract, each Tenderer in its name should have in the last five years i.e.2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 3.2(b)satisfactorily completed as prime contractor, at least one similar work such as Improvements and Asphalt road work of value not less than Rs. 384.45 lakhs.

Others -- Work done Certificate issued by competent Authority of rank not less than Executive Engineer.

The Tenderer should have executed in any one year in the last five years i.e.2021-22 to 2025-26 3.2 (c) the following minimum quantities of work 1. EWE / Embankment/Subgrade- 8981.29 m3 2. PCC/RCC - 2280.18 m3 3. TMT Steel -93.62 t 4. GSB/ WMM - 3797.52 m3 5. BM/DBM/BC/SDBC - 851.64 m3

Others -- Work done Certificate issued by competent Authority of rank not less than Executive Engineer.

Capabilities of Vendor

List of machinery to be owned 1. 40/60 TPH capacity Hot Mix Plant- 1No. 2. Mechanical paver finisher-1 No.3. Batching Plant- 1 No. 4. Tipper- 3 Nos. 5. Vibratory Roller- 1No 6. Excavator- 1 No. 7. Water Tanker-2 Nos. 8. Machine Concrete Mixer- 02Nos and List of machinery on own OR Hire OR Lease Basis 1. Static Road Roller- 1No 2. Tipper- 3 Nos. 3. Water Tanker-2 Nos 4. Vehicle Mounted Mechanical Sprayer-1 No 5. Excavator- 1 No. 6. Machine Concrete Mixer- 01 No. 7. Motor Grader - 1No 8. Pug mill - 1No 9. Transit Mixer- 2 Nos

Others -- Ownership,saledeed,Registration certificates,Delivery invoice,lease:hire document attested by Notary

3.6 Statement indicating the (A) Existing commitments and ongoing works, (B)Details of works for which tenders are already submitted . The statements should furnished as per statement 1.5 (A),(B) of Section 3 of Qualification information in Standard Bid document.

Others -- details work listed in the Statement should be counter signed by the EE or Equivalent officer

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 3.2(a) achieved in at least two financial years a minimum financial turnover of Rs. 1537.79 Lakhs, (in all classes of Civil Engineering Construction works only)

Others -- Balance sheet & Profit & Loss Account indicating contract receipts issued by the competent accountant / Authority with UDIN number

Each tenderer should further demonstrate:3.3(b) liquid assets and / or availability of Credit facilities of not less than Rs.230.67 Lakhs (Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc.,

Others -- Bankers Certificate

EMD for Rs. 100000.00 shall be paid through KPPP and the Balance of Rs.1053400.00 by Bank Guarantee issued by Nationalised/Scheduled Bank or demand draft/bankers cheque/specified small savings instruments online/ or offline modes of e-payment. Bidder should upload the scanned Copy of such original document issued by Nationalised/ Scheduled Bank IN KPPP. The bidder has to submit the uploaded original Bank guarantee or other documents which described above before entering the agreement if awarded.

Others -- Scanned copy of E.M.D and Bank Guarantee

Others

Name, address, and telephone, telex, and fax numbers of the Tenderers may provide references if contacted by the Employer.

Others -- Name, address, and telephone, telex, and fax numbers of the Tenderers may provide references if contacted by the Employer.

GST Declaration Certificate

Others -- GST Declaration Certificate

The Tender should have a valid KPWD Registered Class-I contractor.

Others -- Registration Certificate

Work Locations

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹11.5 L

Important Dates

Last Activity

29 Jul 2026

Published

29 Jul 2026

Bid Opening

17 Aug 2026

Download Ends

13 Aug 2026

Pre-Bid Meeting

10 Aug 2026

BOQ Preview

•

PART A-ROAD WORK

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Cutting of Trees, excluding removal of stumps and roots of trees - Girth from 600 mm to 900 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all materials labour HOM of machineries,...

•

Cutting of Trees, excluding removal of stumps and roots of trees - Girth from 900 mm to 1800 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all materials labour HOM of machineries...

•

Cutting of Trees, excluding removal of stumps and roots of trees - Girth above 1800 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all materials labour HOM of machineries, equipme...

•

Removal of stumps and roots including backfilling with suitable material to required compaction - Girth from 600 mm to 900 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all mater...

•

Removal of stumps and roots including backfilling with suitable material to required compaction - Girth from 900 mm to 1800 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all mate...

•

Removal of stumps and roots including backfilling with suitable material to required compaction - Girth above 1800 mm. Ref to MoRT&H : IRC - 201 ---- Including cost and conveyance of all materials lab...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Dismantling of Flexible Pavements - Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately - By Mechanical ...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Road Delineators - Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fit...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Supplying and installation of Flexible Median Marker (road way indicators, hazard markers) as per IRC 79-2019 for improving median visibility of the road.It shall be made from a com...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic ...

•

Providing and fixing RCC name board of size 1.35x0.60x0.04 m fixed in reinforced cement concrete poles of size 0.10x0.10x2.60m in cement concrete M 20 proportion ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per Design in Double Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class beddin...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Tack coat on Bituminous surface - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with m...

•

Dense Graded Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Dense Graded Bituminous Macadam with 100 TPH capacity HMP batch type using crushed aggregates of specif...

•

Bituminous Concrete Grading II for traffic <20 MSA - Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specifi...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

•

Painting on concrete surface - Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and apply...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Construction of Median and Island with Soil Taken from Roadway Cutting - Construction of Median and Island above road level with approved material deposited at site from ...

•

C.I. grating 150x150 mm ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading charges, transportation and all other incidental ...

•

PART B-Third year maintenance

•

Clearing & grubbing road land including vegetation, bushes, shrubs, saplings by using weed cutter / minor equipment. ---- Including cost and conveyance of all materials labour HOM of machinerie...

•

Maintenance of Drains - The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per technical speci...

•

Patching of Potholes - Patching of Shallow Potholes using SDBC Gr II 25 mm thick - Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The ...

•

PART C-Fourth year maintenance

•

Clearing & grubbing road land including vegetation, bushes, shrubs, saplings by using weed cutter / minor equipment. ---- Including cost and conveyance of all materials labour HOM of machinerie...

•

Maintenance of Drains - The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per technical speci...

•

Patching of Potholes - Patching of Shallow Potholes using SDBC Gr II 25 mm thick - Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The ...

•

PART D-Fifth year maintenance

•

Clearing & grubbing road land including vegetation, bushes, shrubs, saplings by using weed cutter / minor equipment. ---- Including cost and conveyance of all materials labour HOM of machinerie...

•

Maintenance of Drains - The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per technical speci...

•

Patching of Potholes - Patching of Shallow Potholes using SDBC Gr II 25 mm thick - Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The ...

•

PART E- Median lighting

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

1.1 kV, XLPE or Heat resistant PVC

•

insulated, PVC exutruted Inner Seath

•

Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip

•

thickness and resistivity as per IS-3975 25 Sqmm, ...

•

1.1 kV, XLPE or Heat resistant PVC

•

insulated, PVC exutruted Inner Seath

•

Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip

•

thickness and resistivity as per IS-3975 16 Sqmm, ...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm ---- Including cost and conveyance of all materia...

•

Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unl...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- Including cost and conveyance of all materials labour HOM of machineri...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 5...

•

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. ---- Including cost and con...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 100 A ---- Including cost and conveyance of all materials labour HOM of mach...

•

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

•

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 65 A --...

•

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting ---- Including cost and conveyance of all m...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...

•

with .W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Devel...

•

Optical fiber cable (OFC) and its accessories HDPE/PLB pipe 50/42 mm ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading char...

•

8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading charges, transportation a...

•

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring

•

using suitable capacity wires ---- Including cost and conveyance o...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703 upto 63 A ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and...

•

Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703 Above 63 A to 200 A ---- Including cost and conveyance of all materials labour HOM of machineries, equipment...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Brass Cable Gland 25 mm ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading charges, transportation and all other incidental ...

•

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

•

Spiral Earth Electrode ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading charges, transportation and all other incidental c...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

Decorative Median light poles: Fabricating, supplying and erection of 11 Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with doo...

•

PART F-Electric pole shifting

•

Supply & Erection of RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785including Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC su...

•

Supply & Erection of PSCC Pole - 9 Mtr Long, 200 Kg WL (Dwg No.BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards including Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC...

•

Supply & Erection of Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL (Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158: 1991 including Digging of Pit 2.5 Mtr depth for erection of 11 ...

•

Providing & Fixing the 11 kV, 200 Amps, Single Break GOS (C,D.S-24 Pg No 371/635 Sl.no 16 ) (Material ) ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead a...

•

11 kV, Horizontal Cross Arm with clamps, HTST

•

Supports, bolts, nuts and washers for PSCC Pole - 9 Mts Long, 300 Kg WL (Material + Labour ) ---- Including cost and conveyance of all materials labour HO...

•

Special Cross Arm with Cross Arm for EG Stirrups,

•

braces, clamps, bolts nuts and washers complete ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lif...

•

HT ST Support 50x8 mm Flat - MS

•

(Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018) ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloadi...

•

Supply & Providing of 11 kV, 45 kN Polymeric Insulator ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading charges, transport...

•

Supply & Providing of 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) (Material ) ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and l...

•

LT 4 Pin Cross Arm with clamps, bolts, nuts and

•

washers for RCC Pole - 8 Mtr Long 115 Kg WL ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, lo...

•

Supply of 1.1 kV Ceramic Pin Insulator (Shell only) (Material) ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading charges, t...

•

1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading charges, transportation ...

•

No.8 Strain Insulator ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading charges, transportation and all other incidental ch...

•

Supply & Providing Guy set with No. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07 (Material + Labour ) ---- Including cost and conveyance of all materials labou...

•

Supply & stringing of Rabbit ACSR

•

(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM and Stringing of Conductor for Rabbit ACSR ) (Material + Labour ) ---- Including cost and conveyance of all materials...

•

Loading and unloading of Pole (loading of Pole to vehicles at stores and unloading at

•

workspot) NOTE:- Consolidated amount for both loading and unloading. 9 Mtr RCC/PSCC Pole ---- Including cost and c...

•

Guy concreting with Boulders, Mud and Sand ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading charges, transportation and al...

•

Releasing of RCC Pole - 9 M Long, 145 Kg WL (Labour )(1.9*1742) ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading charges, ...

•

Releasing and rifixing of 25 to 63 KVA transformer on transformer structure(1062*1.9) ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading a...

•

Releasing & Refixing of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for

•

Releasing and refixing of L T Protection kit (317*1.9) ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading charges, transport...

•

Releasing of Wiring of 1 Circuit of LT Wiring for for 25/63/100 kVA DTC

•

to the existing LT protection Kit/Distribution Box via metering box. (includes fixing of necessary supports like 2 Pin cross arm...

•

Releasing and refixing of V shape/ horizontal cross arm including single top support brace and insulator fixing (228*1.9) ---- Including cost and conveyance of all materials labour HOM of machineries,...

•

Releasing and refixing of 1.1 KV , 3 phase aerial bunched cable of size 3x95+1x16+1x70 sqmm(29506*1.9) ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead an...

•

Releasing and Restringing of ACSR Rabbit conductor (Labour ) (3885*1.9) ---- Including cost and conveyance of all materials labour HOM of machineries, equipment, lead and lift, loading and unloading c...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

GST Declaration.docx

Others - GST Declaration • 0.01 MB

38045 kw-4 bid.doc

Tender Document • 1.05 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Roads

FOUR LANE IMPROVEMENTS OF THARIKERE- VV PURA- DHARMAPURA(SH-24) ROAD FROM CH 50.80 KM TO 51.80 KM (IN SELECTED REACHES) AND CONSTRUCTION OF DECK SLAB TO CONNECT KSRTC DEPO IN HOSADURGA TALUK

Public Works Department

PWD Division Office Chitradurga | CHITRADURGA, Karnataka

Amount: ₹7.7 CrCloses: 14 Aug 2026Closed

Timeline

Published29 Jul 2026
Pre-Bid Meeting10 Aug 2026
Closed14 Aug 2026
Bid Opening17 Aug 2026