Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.3 LAccepted-AOC | ₹17.3 L | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹18.0 LRejected-AOC | ₹18.0 L | L2 | Rejected-AOC 2 nd Lowest Bidder |
| Sl No | Description | Qty | Unit | SOUBHAGYA ENGINEERING COMPANY L1 | ANOOP KUMAR P L2 |
|---|---|---|---|---|---|
| 1.00Electrification | |||||
| 1.00 | OD177307/2025-2026:Supply .Conveyance, Installation .Testing and Commissioning of 82.5 KVA DG set with suitable rated MCCB with Overload and Short circuit Protection and integral Acoustic enclosure with latest CPCB norms(IV+) and as per the technical details given below:- Engine :- a. Make of Engine Cummins / KOEL Green/Caterpillar b. Type of Engine Diesel Engine c. No. of cylinders 4 or higher ln-line d. Method of cooling- liquid cooling with radiator e. Aspiration Turbo charged. Charge air Cooled f. Design suitable for generator set application g. Required power for rated 82.5 KVA at 1500 RPM under NTP Conditions or other BHP ratings specified by the respective manufactures capable of delivering the required power for alternator ; Standard accessories of the diesel engine a. Fly wheel housing and Fly wheel to suit single bearing alternator (Close coupled arrangement) b. Air cleaner c. Coolant kit d. Fuel Pump e. Electronic governor f. Fuel filter g. Lubricating oil filter h. Residential type exhaust silencer ; Engine Instrument Panel a. Starting switch with key or button b.Lubricating oil temperature gauge c. Lubricating oil pressure gauge d Water temperature gauge e. RPM Indicator with hour meter f. Battery charging ammeter ; Safety Controls for Engine a. Trip to( low lubricating oil pressure b. Trip for low/ high Coolant temperature c. Providing necessary warning system and other safeties as contemplated in relevant ISS d. Fuel shut off facility at over speed ; Fuel Pipe :- Oil resistant flexible hoses & 25mm dia or nearest size MS pipe as per manufactures requirement for fuel line ; Alternator :- a.Make:Stamford/ KoEL Green/ Leroy somer b.Type:Brush less type, Screen protected. Revolving field Self exited Generator c.Capacity :82.5 KVA/ 66 KW at 0.8 PF d.System of voltage : 3 phase ,415V e.Speed: 1500RPM: f.Voltage regulation band:+/-1.00% of rated Voltage g. Insulation : Class H h. AVR: Digital AVR shall be provided i.IP rating of enclosure : IP 23 j. THD:No Ioad 1.5%, non-distorting balanced linear load 5% k.Telephonic harmonic factor : less than 2% ; Safety Protection for Alternator :- AC Alternator protection for over/ Under Voltage, over/ Under frequency, Overcurrent. Short circuit and loss of AC sensing The alternator should confirm to IS/ IEC 60034-1. Routine tests as per relevant ISS shall be conducted and test reports of the same shall be furnished at the time of delivery. Fuel tank : Integral type fuel tank of capacity not less than 150 liters/as per manufactures standards with drain plug. air vent, inlet arid outlet connections, level indicator and provisions for cleaning. With Battery, battery Charger, Indicating Ammeter & Voltmeter etc. This will be in addition to the battery charging alternator or dynamo fitted on the engine. ; Acoustic Enclosure :- a, The DG set shall be supplied along with specially designed company Fabricated (to be fabricated in the same company firm where the DG set delivered) acoustic enclosure to meet the stringent MOEF/ CPCB norms of 75 dBA @1 m at 75% load under free field conditions b. Sufficient space and clearance shall be maintained inside the enclosure to have optimum serviceability c. Air inlet louvers shall be designed in such a way as to operate the set at rated load even at 50degC enclosure temperature d. The enclosure shall be 11 tank pre treatment processed and UV resistant Powder coating of all parts to withstand extreme environments e. Hardware used shall be of only stainless steel make f. Insulation material shall conform to IS 8183 specifications ; Documents to be handed over :- a.Engine manual b.Spare parts book c.Warranty certificate d.Alternator manual & test certificate e. 1 set control wiring drawing ; Mounting Arrangement :- It shall be installed in the pre-constructed concrete bed on a common MS fabricated base frame with AVM pads complying to relevant lS standards, lE rules and as per the direction of the Department officials. ; Exhaust System :- Exhaust piping: All MS pipes for exhaust line shall be conforming to the relevant IS. The work include necessary cladding of exhaust pipe work using 50mni thick loosely hound resin (ABR) matters/ mineral wool/ Rock wool, density not less than 120 Kg/m3 and aluminum cladding (0.6mm thick) for the complete portion. The exhaust pipe work includes necessary supports, foundation to avoid any load and stress on turbo charger/ exhaust piping. The exhaust piping Shall be run along the existing wall of the building duly clamped/ supported on independent structure. a) Exhaust system should create minimum back pressure. b)Number of bends should be kept minimum and smooth bends should be used to minimize the back pressure. (c)Exhaust pipe inside the acoustic .Enclosure/ Generator room should be lagged with asbestors rope along with aluminum sheet cladding (d)When the tail end is horizontal, 45 Degree downward cut should be given at the end of the pipe to avoid rain water entry into exhaust piping. (e)When tail end is vertical there should be rain trip to avoid rain water entry. If rain Cap is used, the distance between the rain cap and exhaust pipe should be higher than the diameter of the pipe. (f)The exhaust outlet should be in the direction of prevailing winds and should not allow exhaust gases to enter air inlet / windows etc. (g) MS pipes and long bend/ elbows should be used. ; Testing and commissioning :- The DG set shall be tested as per relevant IS standards in the presence of Dept. Engineers. Block load testing shall also be conducted. The load required for testing shall be made available by the selected agency/ Contractor at his own expense. Warranty : The DG set shall be guaranteed for 3 years from the date of commissioning. During the warranty period engine oil and coolant changing, topping up oil/coolant level checking , routine engine maintenance including material and labour etc. to be done by the contractor at his own expense and the changing of of the spares/ components which are found to be defective during this period shall be replaced immediately free of cost by the selected Agency/ Contractor (rate for 3 years Warranty and maintenance charges including consumables included). | 1 | each | 14,00,000 ₹14,00,000 | 14,35,000 ₹14,35,000 |
| 1.00 | OD177540/2025-2026:Supply and providing Class B MS pipe with all required specials fasteners supports etc. complete of size 100mm dia to extend the exhaust pipe of generator as required . | 5 | 1 meter | 2,200 ₹11,000 | 2,350 ₹11,750 |
| 1.00 | OD177541/2025-2026:Supply and providing Class B MS pipe with all required specials fasteners supports etc. complete of size 125mm dia to extend the exhaust pipe of generator as required . | 5 | metre | 2,600 ₹13,000 | 2,700 ₹13,500 |
| 1.00 | OD177333/2025-2026:Supplying and installation of supports, anchor bolts etc made out of suitable size single section MS angle, flats etc as required including painting with 2 coats of synthetic enamel paint | 90 | kg | 140 ₹12,600 | 190 ₹17,100 |
| 1.00 | OD177334/2025-2026:Supply and providing thermal insulation of exhaust line, glass wool with Al. sheet, chicken mesh, necessary rivets , screws etc complete. | 2 | sqm | 2,500 ₹5,000 | 2,700 ₹5,400 |
| 1.01 | OD177340/2025-2026:Supply of High speed diesel (HSD) for full tank of DG set including conveyance, loading and unloading | 100 | Litre | 120 ₹12,000 | 120 ₹12,000 |
| 1.01 | 14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. | 3 | cum | 425 ₹1,275 | 525 ₹1,575 |
| 1.01 | 14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. | 3.5 | cum | 9,500 ₹33,250 | 10,000 ₹35,000 |
| 1.01 | 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels | 6 | sqm | 400 ₹2,400 | 450 ₹2,700 |
Tender Value
₹17.3 L
EMD Value
₹43,247
Closing Date
3 Nov 2025, 6:00 pmClosed
Executive Engineer
PWD ELECTRICAL DIVISION KOZHIKODE
DEPOSIT- Taluk Hospital Nadapuram Kozhikode District-Providing 82.5 KVA DG set for Dialysis units and Major OT.-General Electrical Work
2025_PWD_815729_2
PWD/BLDG/11507/2025-2026
Open Tender
Electrical Works
KOZHIKODE
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹43,247
Yes
27 Jan 2026
27 Oct 2025
5 Nov 2025
27 Oct 2025
3 Nov 2025
27 Oct 2025
Amount
Electrification
OD177540/2025-2026:Supply and providing Class B MS pipe with all required specials fasteners supports etc. complete of size 100mm dia to extend the exhaust pipe of generator as required .
OD177541/2025-2026:Supply and providing Class B MS pipe with all required specials fasteners supports etc. complete of size 125mm dia to extend the exhaust pipe of generator as required .
OD177333/2025-2026:Supplying and installation of supports, anchor bolts etc made out of suitable size single section MS angle, flats etc as required including painting with 2 coats of synthetic enamel paint
OD177334/2025-2026:Supply and providing thermal insulation of exhaust line, glass wool with Al. sheet, chicken mesh, necessary rivets , screws etc complete.
OD177340/2025-2026:Supply of High speed diesel (HSD) for full tank of DG set including conveyance, loading and unloading
14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.
14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.
14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels
OD177914/2025-2026:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars CPWD Code 5.22.6
5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
OD177409/2025-2026:Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate
OD177410/2025-2026:Providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system
90.12.7.31:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 95 sq mm
90.12.7.2:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp
OD177911/2025-2026:Supply, laying and clamping of one number 2.5 sqmm 12 core PVC/ XLPE insulated armoured control cables with copper conductors for working voltages up to and including 1100 V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
90.12.5.31:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 95 sq mm
90.12.5.2:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm
OD177912/2025-2026:Supply & laying of one number PVC insulated and PVC sheathed armoured copper Control cable of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required. 12 core 2.5 sqmm
9.1.24:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)
1.32:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
OD177933/2025-2026:Supplying and fixing 2P sheet steel enclosure suitable for fixing RCCB/Isolator on surface/ recess complete with all accessories,good the damages,colour washing etc. as required.
2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole
1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
90.12.10.5:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation90/75 mm or nearest size
90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size
OD177925/2025-2026:Supply & laying of DWC pipe through the wall/ parapet using clamps noted along with the DWC pipe, making good the damages colour washing etc. as required. 50/38 mm or nearest size
90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
90.16.3.3:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 6 mm GI strip
OD177920/2025-2026:Supply and laying the following sizes of strips laid 0.60 m below ground level including excavating trench of suitable size and refilling etc. as required. 25x6mm GI strip
90.16.3.9:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip
OD177927/2025-2026:Supply and providing 25x6 mm brass bolt and nut with washer including drilling holes as required.(excluding GST)
OD177928/2025-2026:Supply and providing 25x3mm brass nut and bolt etc. as required.
OD177936/2025-2026:Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required 2.5 cm, 4 cm, 5 cm height
OD177938/2025-2026:Supply and installation of ABC type fire extinguisher 5kg capacity consisting of M.S cylindrical body,squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30cm long high pressure discharge hose, nozzle etc.
9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)
ANOOP KUMAR P (BID ID -2420979)
Bidder Name
SOUBHAGYA ENGINEERING COMPANY
ANOOP KUMAR P
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1365810.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
NitTalukHospitalNadapuram.pdf
Tender Documents • 0.02 MB
ADDITIONALCONDITIONSTHNADAPURAM.pdf
Tender Documents • 0.56 MB
SPECIFIC_CONDITIONS_Electrical.pdf
Tender Documents • 0.19 MB
BOQ_1365810.xls
BOQ • 0.33 MB
NadapuramDGmateriallist.pdf
Tender Documents • 0.20 MB
SBDTalukHospitalNadapuram.pdf
Tender Documents • 1.63 MB
Download all tender documents and submit your bid