Annual Plan-Chelembra Grama Panchayath Installation of Motor for Drinking Water Scheme-S0113/24-General Electrical Work -RETENDER

Amount

wiring

OD157716/2023-2024:Supply, installation testing and commissioning of 7.50 HP or nearest suitable size open welll submersible pump set 2850 rpm at rated voltage 3 phase 380/415V 50HZ AC supply 7 .5 HP CVH-7.5/6 50D 3P DOL V.OPENWELL CRI /7DV 5 7.5 50mm (2") D.O.L Deccan or similer make delivery size 50 mm or nearest size having standrd discharge using leak proof materials as required and suspended on existing rope/steel rope including fixing G.I. / meadium duty Column Pipe for Submersible Pumps as delivery pipe connected one by on e to the motor up to the bottom of the well using leak proof materials as required with necessary supports on both sides of the motor including giving connection as per the direction at site.

OD274919/2023-2024:Supply, installation testing and commissioning of 5 HP or nearest suitable size open Well submersible pump set 2850 rpm at rated voltage 3 phase 380/415V 50HZ AC supply 5DQ 4 5 50mm (2") D.O.L DECCAN/5 HP 4st CVH-5/4-N 50D 3P DOL VOS (S-TY) CRI or similer make delivery size 50 mm or nearest size having standrd discharge using leak proof materials as required and suspended on existing rope/steel rope including fixing G.I. / meadium duty Column Pipe for Submersible Pumps as delivery pipe connected one by on e to the motor up to the bottom of the well using leak proof materials as required with necessary supports on both sides of the motor including giving connection as per the direction at site.

OD275817/2023-2024:Supply and installation testing and commissioning of 1.5 HP 100mm bore Well submerssible motor pump set 2800 RPM at rated voltage single phase 220/240V, 50 Hz, AC supply conforms to IS 8034 head 75-136 1.5HP 19STAGE CRI4R-2/19 32D GENIE 1PH CSCR CRI pump/ER41HVR/20 Deccan pump or nearest size CRI /Deccan pump set with all systems or simmiler similler make and standard size delivery pipe as company';s make connected one by one to the motor up to the bottom of the well using leak proof materials as required with necessary GI bracket support on top sides of the motor with ropes including giving connection as per the direction at site

OD275818/2023-2024:Supply and installation testing and commissioning of 1.5 HP Horizondal Open Well submerssible motor pump set 2800 RPM at rated voltage single phase 220/240V, 50 Hz, AC supply conforms to IS 8034 IP 58 head 21 42 CSS 26 1.5 HP 32mm or nearest size CRI /Deccan pump set with all systems or simmiler similler make and standard size delivery pipe as company& make connected one by one to the motor up to the bottom of the well using leak proof materials as required with necessary GI bracket support on top sides of the motor with ropes including giving connection as per the direction at site

1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

OD275832/2023-2024:Supply threading, laying and joining of 32 mm or nearest size Column Pipe for Submersible Pumps Approved make specials as delivery pipe using required leak proofing materials etc. as required.

OD157686/2023-2024:Supply threading, laying and joining of 50 mm or nerest size Submersible Column Pipe for bore well submersible pump Approved make specials as delivery pipe using required leak proofing materials etc. as required.

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD157687/2023-2024:2 X 25 mm X 3 mm G.I. strip test joint Supply, providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

OD157688/2023-2024:Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD157689/2023-2024:Supply and providing 25x6mm brass nut and bolt etc. as required

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

90.14.24.2:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors.

OD275838/2023-2024:Supply and installation of Motor pump controllers suitable for 7.5/10HP motor pumps . with single phase preventer and dry run protector (L & T MU-G10 DOL / equivalent )

OD157690/2023-2024:supply and fixing Digital Multifunction meter to read: V, A, F, PF-3 phase accuracy class 1 LED

OD157691/2023-2024:Supply and fixing Danger notice board of size, 125 x 75 mm

OD157692/2023-2024:supply and fixing Red, Green, blue, Yellow, Orange colours LED indicator, AC/DC, as required

OD275829/2023-2024:Supply and providing 32 mm stainless steel Hose Collar with hose clip

OD157693/2023-2024:Supply and providing 50 mm or nearest size stainless steel Hose Collar with hose clip

OD275830/2023-2024:Supply and providing 32 mm dia or nearest size G.M Non return valve (ISI)

OD157695/2023-2024:Supply and providing 50 mm or nearest size dia Gun Metal Non return valve (ISI)

OD275831/2023-2024:Supply and fixing 32 mm dia or nearest size Flange set

OD157697/2023-2024:Supply and providing 50 mm or nearest size dia Flange set

OD275828/2023-2024:Supply and fixing 32 mm dia or nearest size Full way valve

OD157696/2023-2024:Supply and providing 50 mm or nearest size dia Full way valve (ISI)

OD157694/2023-2024:Supply and fixing flat iron clamps made from 2 nos. 50x6 mm flat iron clamp of 50 mm with suitable size bolt and nut for fixing delivery pipe on the top of the well as required

OD157698/2023-2024:Supply & installation of dust and vermin proof, 3 Phase Syntax Meter Board( GS-MB-6535-STD-NF] and to fix KSEB meters, fuse units, CT etc as required including fixing it on wall, making good the damages colour washing etc. as required.

OD157699/2023-2024:Supplying and fixing 63 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board

OD157700/2023-2024:Supplying and fixing 63 A, HRC Fuse with HRC Fuse link with connections, in existing meter board

OD157701/2023-2024:Supply and laying suitable size plastic rope

OD157722/2023-2024:Supply, threading ,laying and jointing of the 50 mm "B' class GI pipe with all required accessories in ground/clamping as assupport pipe etc as required.

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

1.21.4:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm

1.21.5:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm

1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

90.10.3.15:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.10.3:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

OD157702/2023-2024: Charges for preperation of KSEB test Report for submitting to the concerned KSEB section office

MANSOOR KEETHADATH

Bidder Name

MOIDEENKUTTY KOLAMBAN

MANSOOR KEETHADATH