Interior fitout Renovation works in the office space of NTA, NSIC Okhla

Total Amount Including GST ₹ 88,87,369.05

S DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL TOTAL

NO 2023 AMOUNT AMOUNT

DSR (INR) NON-DSR

Dismantling tile work in floors and roofs laid in

1.1 15.23 cement mortar including stacking material

within 50 metres lead.

For thickness of tiles above 10 mm and up to

Demolishing brick work manually/ by

mechanical means including stacking of

1.2 15.7 serviceable material and disposal of

unserviceable material within 50 metres

lead as per direction of Engineer-in-charge.

Dismantling of partitions, work stations, doors,

ceiling, electrical points, wiring, conduits,

piping, sanitary fittings and other items

including clear of debris and making clear

and open hall as per direction of EIC and

requirement of site

Carriage of material by mechanical transport

including loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

TOTAL OF DISMANTLING 70,681 95,000

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-CIVIL

DSR/ MR AMOUNT AMOUNT

S NO DESCRIPTION Unit QUANTITY RATE

DSR ITEM NON DSR ITEM

1 FLOORING WORKS

Providing and laying in position CEMENT CONCRETE of specified grade exluding the

cost of centring and shuttering-all work upto plinth level.

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying vitrified floor and wall tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm

1.04 11.41A thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry

@ 3.3 kg/ sqm including grouting the joints with white cement and matching

pigments etc., complete.

11.21 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved

make and colour using acid and/or alkali resisting mortar bedding, and joints

filled with acid and/or alkali resisting cement as per IS : 4457, complete as per

1.05 the direction of Engineer-in- Charge.

11.21.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse

11.21.1.1 Acid and alkali resistant tile Sqm 30 1738.15 52144.50

11.21.2.1 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)

Acid and alkali resistant tile

TOTAL FLOORING WORKS

2 FALSE CEILING WORKS

Digitally signed by AMIT

Providing and fixing false ceiling at all height including providing and fixing of

frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277

and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27

mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with

dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26

mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at

450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing

of gypsum board to ceiling section and perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3 layers covering

upto 150 mm on both sides of joint and two coats of primer suitable for board, all as

per manufacturer's specification and also including the cost of making openings

for light fittings, grills, diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification and direction of the

Engineer in Charge but excluding the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)

12.45.1 :2011 (Board with BIS certification marks) Sqm 80.00 1355.80 108464.00

Digitally signed by AMIT

Providing and fixing mineral fibre false ceiling tiles at all heights of size

595X595mm of approved texture, design and pattern. The tiles should have

Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal

Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6

&7)in true horizontal level suspended on interlocking T-Grid of hot dipped all

round galvanized iron section of 0.33 mm thick (galvanized @120 gsm)

comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size

15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32

mm of length 600 mm to form grid module of size 600x600 mm suspended

from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long

2.03 26.27 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger

rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm,

spaced at 1200 mm centre to centre along main ‘T’. The system should rest on

periphery walls /partitions with the help of GI perimeter wall angle of

size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with

help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S.

screws. The exposed bottom portion of all T-sections used in false ceiling

support system shall be pre-painted with polyester baked paint, for all heights.

The work shall be carried out as per specifications, drawings and as per

directions of the engineer-in-charge.

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55

Digitally signed by AMIT

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in

true horizontal level, suspended on inter locking metal grid of hot dipped

galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive)

consisting of main "T" runner with suitably spaced joints to get required length and

of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm

center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum)

sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form

a grid of 1200x600 mm andsecondary cross "T" of length 600 mm and size 24x25 mm

made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the

1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3

mm and laying false ceiling tiles of approved texture in the grid including, required

12.52 cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke

detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats

of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash

fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30

x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width

of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for

all heights as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595

mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of

12.52.1 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated Sqm 45.00 1902.95 85632.75

of thickness 60 microns

(minimum), including factory painted after bending

TOTAL FALSE CEILING WORKS

3 WALL FINISHES WORKS

Providing wood work in frames of doors, windows, clerestory windows and other

frames, wrought framed and fixed in position with hold fast lugs or with dash

3.02 9.1 fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood cu m 1.00 142949.70 142949.70

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

non-decorative type, core of block board construction with frame of 1st class hard

3.04 9.21 wood and well matched commercial 3 ply veneering with vertical grains or cross

bands and face veneers on both faces of shutters:

35mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Digitally signed by AMIT

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth

3.05 9.23 on all edges of flush door shutters (over all area of door shutter to be measured). Sqm 30.00 462.35 13870.50

Providing and Fixing 1236-22X922 mm Dtype Handle Material : Stainless Steel. Finish

: Satin Stainless Steel (SSS). of approved make and model all complete as per the

direction of Engineer-in-charge.

Providing and Fixing SS Mortise Lock Body SB/TB for door thickness 25-50 mm for

3.07 MR wooden doors of approved make and model all complete as per the direction of Each 14.00 895.62 12538.65

Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with

10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete

3.09 9.53 block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone Each 45.00 228.85 10298.25

aggregate 20mm nominal size).

Providing and Fixing top and Bottom Strap for wooden doors of approved make

and model all complete as per the direction of Engineer-in-charge.

Providing & supplying of Window Blinds as per the approved sample in required

shade and style consisting, of Roller Blinds comprising of optima screen Fabric

comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m,

Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-

89 small testing ISO-5659-2 .The tear resistance should be complying to ISO4674 &

breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick,easy and

safe installation,moulded plastic with steel spring support and inserted into the tube

end. It shall be driven by a ball chain pulley with ball chain and can be positioned

at right side or left hand side of the Shade. The Shade when lowering or raising,

shall be automatically locked in position upon release of the ball chain by means

of a built in friction lock.Universal clutch for left and right hand operation.Chain

Gear Ratio of 1.75:1.The END PLUG shall be molded of plastic witha steel location

pin. The plug shall be inserted into the tube end. (Opposite to the Drive Unit) for

ease of installation. TheSUPPORT BRACKETS shall be of coated steel & provided with

covers and used in right hand or left hand positions differentiated by the

acceptance of the of the rectangular drive unit support or the round idler plug

pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The

Bracket should be protruding outside maximum of80mm.The ROLLER TUBE shall be

of extruded aluminum with 37mm internal diameter & skin thickness of 1mm and

shall incorporate a key way integral with the tube to accommodate the spline. The

BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The

BALLCHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls moulded

co-axially to it on 6mm pitch to form an endless ballchain.It is used for raising or

lowering action of the shades.

Digitally signed by AMIT

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

6.13 designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

3.20 6.15 course of half brick masonry. Sqm 10.00 104.80 1048.00

12 mm cement plaster of mix :

1:4 (1 cement: 4 coarse sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered

3.22 13.26 surface to prepare the surface even and smooth complete. Sqm 800.00 262.70 210160.00

Wall painting with acrylic emulsion paint of approved brand and manufacture to

give an even shade :

Two or more coats

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement

Providing and fixing 12mm thick frameless toughened glass door shutter of

approved brand and manufacture, including providing and fixing top & bottom

pivot & double acting hydraulic floor spring type fixing arrangement and making

4.00 MR necessary holes etc. for fixing required door fittings, all complete as per direction of Sqm 10.00 5825.00 58250.00

Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). This

item also includes Al frame profile of size 45-50mmx 65-70 mm with thickness of 2mm

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special

CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised

designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive

having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C).

Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic,

MR Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs Sqm 8.00 1250.00 10000.00

(indoors) must be endorsed by 3M India Limited Architectural Market Department.

Contractors payment wouldn't be released until & unless he/she produces orginal

warranty certificate from the manufacturer.

Digitally signed by AMIT

12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and

pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %)

total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in

240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and

polyester top coat 15-18 microns. Sheet should have protective guard film of 25

4.01 microns minimum to avoid scratches during transportation and should be Sqm 40.00 738.65 29546.00

supplied in single length upto 12 metre or as desired by Engineer-in-charge.

The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55

mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved

surfaces, excluding the cost of purlins, rafters and trusses and including cutting

to size and shape wherever required.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.)

trusses etc., including cutting, hoisting, fixing in position and applying a priming

10.16 coat of approved steel primer, including welding and bolted with special shaped

washers etc. complete.

10.16.2 Hot finished seamless type tubes Kg 120.00 206.35 24762.00

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless

steel nuts and bolts complete, i/c fixing the railing with necessary accessories

& stainless steel dash fasteners , stainless steel bolts etc., of required size, on

10.28 the top of the floor or the side of waist slab with suitable arrangement as per Kg 700.00 772.40 540680.00

approval of Engineer-in-charge, (for payment purpose only weight of stainless

steel members shall be considered excluding fixing accessories such as nuts,

bolts, fasteners etc.).

Painting with synthetic enamel paint of approved brand and manufacture of

required colour to give an even shade :

13.99.1 One or more coats on old work Sqm 30.00 102.80 3084.00

Digitally signed by AMIT

Providing and laying water proofing treatment in sunken portion of WCs,

bathroom etc., by applying cement slurry mixed with water proofing cement

compound consisting of applying :

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing

cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4

22.5 (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing Sqm 40.00 617.05 24682.00

cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4

hours followed with water curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all joints,

corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying in situ five course water proofing treatment with APP

(Atactic Polypropylene) modified Polymeric memberane over roof consisting

of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding

material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/

25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric

membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers

14.87 prefabricated with centre core as 100 micron HMHDPE film sandwiched on both Sqm 550.00 532.05 292627.50

sides with polymeric mix and the polymeric mix is protected on both side with

20 micron HMHDPE film. 5th, the top most layer shall be finished with brick

tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine

sand) mixed with 2% integral water proofing compound by weight of cement

over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished

neat (item of laying brick tiles shall be paid for separately)

Providing and fixing in position collapsible steel shutters with vertical channels

20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and

10.3 bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with Sqm 25.00 11439.60 285990.00

bolts, nuts, locking arrangement, stoppers, handles, including applying a priming

coat of approved steel primer.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size

25x25 mm made of G.I. wire of dia 3 mm including

16.71 strengthening with 2 mm dia wire or nuts, bolts and washers as Sqm 40.00 1149.25 45970.00

required complete as per the direction of Engineer-in-charge.

Digitally signed by AMIT

Providing and fixing concertina coil fencing with punched tape concertina coil 600

mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6

metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed

2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied

with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I.

16.53 barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, Meter 50.00 375.80 18790.00

with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile

strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre

(cost of M.S. angle, C.C. blocks shall be paid separately)

Steel work welded in built up sections/ framed work, including cutting, hoisting,

fixing in position and applying a priming coat of approved steel primer using

10.25 structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

9.7.7 Float glass panes

9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). sqm 50.00 2600.45 130022.50

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN

MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY)

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE:

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING

32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL

MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 10 3000.00 30000.00

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL

MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 3 13000.00 39000.00

SET, SIZE: 375X520X400 MM

MR 6 Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE EACH 3 6000.00 18000.00

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH

MR 8 ADJUSTABLE WITH WALL FLANGE 15mm EACH 3 4500.00 13500.00

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH

8mm DIA 1.2 METER LONG FLEXIBLE TUBE

Supply, HOOK ALD-CHR-573

Installation, Testing andor Commisiong

equivalent of PNEUMATIC SINGLE PIECE SLIM

MR 10 CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE EACH 3 7000.00 21000.00

CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28 complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6mm thick

17.31 12 hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. EACH 3 1411.15 4233.45

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

13 quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 0 500.35 0.00

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

17.61 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and

pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 1 362.40 362.40

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching

surface after housing G.I. pipe etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

17 Internal work - Exposed on wall

Digitally signed by AMIT

18.7.2 20mm nominal outer dia pipes METRE 0 325.10 0.00

18.7.3 25mm nominal outer dia pipes METRE 20 408.55 8171.00

18.7.4 32mm nominal outer dia pipes METRE 0 500.95 0.00

18.7.5 40mm nominal outer dia pipes METRE 0 674.35 0.00

18.7.6 50mm nominal outer dia pipes METRE 0 927.00 0.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing.

18.8 18 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes METRE 30 441.15 13234.50

18.8.2 20mm nominal outer dia pipes METRE 20 513.75 10275.00

18.8.3 25mm nominal outer dia pipes METRE 626.05 0.00

18.8.4 32mm nominal outer dia pipes METRE 712.75 0.00

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

19 standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 6 708.40 4250.40

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

20 including chase cutting as required, excavation and back filling in all kind of soils, suspended

from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.

alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including cost of shuttering for proper completion of the work, breaking and

making good the walls and floors etc. after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 416.00 0.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

MR 21 enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

complete in all respects.

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 10 726.00 7260.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round

cover with screws and other required fitting complete as required.

MR 25 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 10000.00 0.00

MR 26 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 5 4392.00 21960.00

MR 27 Supply, Installation, Testing and Commisiong of TUMBLER HOLDER EACH 5 4309.00 21545.00

Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH

MR 29 Supply, Installation, Testing and Commisiong of ROBE HOOK EACH 2045.00 0.00

Digitally signed by AMIT

Supply, Installation, Testing and Commisiong of TOILET ROLL HOLDER WITH COVER

MR 31 Supply, Installation, Testing and Commisiong of TOWEL HOLDER EACH 3336.00 0.00

Providing and fixing white vitreous china water closet squatting pan (Indian

17.13.1 Long pattern W.C. pan of size 580 mm EACH 2 1959.80 3919.6

Providing and fixing P.V.C. low level flushing cistern with manually controlled

17.18 device (handle lever) conforming to IS : 7231, with all fittings and fixtures

17.18.1 10 litre capacity - White EACH 2 1190.65 2381.3

Providing and fixing white vitreous china battery based infrared sensor operated urinal of

approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml

consumption), having water inlet from back side, including fixing to wall with suitable brackets

all as per manufacturers specification and direction of Engineer-in-charge

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.1 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting

and making good the walls wherever required : Each 2 6945.60 13891.20

17.10.1 Kitchen Sink with Drain Board

17.10.1.1 510 x1040 mm bowl depth 250 mm

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

1.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in surface / recessed medium

class PVC conduit, with modular switch, modular plate, suitable GI box and earthing

A.1 the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as

1.55 Wiring for group controlled (looped) light point/ fan point/call bell point (without

independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor

A.2 single core cable in surface / recessed PVC conduit, and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor

single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq.

mm FRLS PVC insulated copper conductor single core cable for loop earthing as

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 60 122.00 7320.00

1.24.5 6 pin 15/16 amp socket outlet Each 15 197.00 2955.00

A.5 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch Each

box excluding modular plate as required. 30 40.00 1200.00

1.27 Supplying and fixing following size/module, GI box along with Modular base & cover plate

on existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

FR PVC insulated copper conductor, single core cable in surface/ recessed medium

class PVC conduit

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 50 233.00 11650.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 20 334.00 6680.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 150 439.00 65850.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 120 1005.00 120600.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire 1

Digitally signed by AMIT

Supplying and fixing of following sizes medium class PVC conduit aong with accessories

1.21 in surface/ recess including cutting the wall and making good the same incase of

recessed conduit as required

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel,

MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,

neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing

etc. as required. (But without MCB/ RCCB/ Isolator)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes

D.5 in the existing MCB DB complete with connections, testing and commissioning etc. as

Supplying and fixing following rating, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

2.15 having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

Supply, Installation, Testing and Commissiong UPS of required capacity with True Online

Double Conversion UPS 3Phase Input - 3Phase Output in Parallel Redundant N+1

Configuration IGBT Based Rectifier and IGBT Based Inverter Batteries of suitable

capacity/ Voltage, SMF Amararaja/Exide with minimum VAH capacity suitable for 30

minutes backup with each ups Along with Accessories Rack, Interlinks, SFU, Parallel Kit,

MR DC Cable Upto 10 /or as per site requirement Meters complete in all respect as per the KVA 10 21611.00 216110.00

directions of the engineer in charge. UPS should have availability of Input /Output isolator,

Inbuilt manual bypass along with phase sequence corrector. Unity PF (Approx) .UPS

Efficiency shall not be less than 90% from 25% to 100% Load or its equivalent

Digitally signed by AMIT

Electrical Lighting

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

Supply, Installation, Testing and Commisioning of Recessed luminaire with LED (Light

Emitting Diode), system power: 28 W, luminous flux of 2800 lm, colour temperature of 6000

K, Neutral white, 230 V constant current driver, 70% of luminous flux after 50,000 operating

hours, energy-efficient LEDs, CRI

> 80, CRI > 80, THD<5%, P.F>0.95, SDCM 3, direct light emission, Luminaire housing in Aluminium

1 MR Extrution, polyester white powder coat applied over a 5- stage pre-treatment, Opal diffuser Nos 120 2899 347880.00

for glare-free uniform light, integral electronic control gear,

Supply, Installation, Testing and Commissioing of Recessed downlightwith HPE (High-

Performance Efficiency) with LED (Light Emitting Diode), system power: 12 W, Luminous flux of

luminaire 1320 lm, 110 LM/W system efficacy, Colour temperature of 4000 K, Neutral white, CRI >

80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy-

efficient LEDs, direct light emission, housing in die-cast aluminium, Polyester powder white

2 MR coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser for Nos 25 1395.00 34875.00

homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

TOTAL 382755.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CCTV

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265

Vandal Proof Dome camera with 2.8 to 12mm

Motorized Lens,Smart IR, up to 30M IR distance,Up to 120 dB

1 MR WDR (Wide Dynamic Range),3D DNR (Digital Noise Nos 8 9000.00 72000.00

Reduction),H.265+, H.265, H.264, MJPEG

2 Supply, Installation, Testing and Commissioning of

8Ch Embedded Network Video Recorder with 4 Sata

MR Supports 1 × RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Nos 1 20000.00 20000.00

Redundant power

3 MR SITC of SSD Hard Disk Drive 6TB, 24/7 surveillance category Nos 1 20000.00

Only complete etc as required.etc.all complete. 20000.00

Supply, Installation, Testing & Commissioning of 32" Flat Screen

HD led (24X7) with Interfaces include HDMI, DVI, D-sub,

Component and Composite input as well as RS-232C and

4 RJ45 for extensive connectivity, remote control and wall 1 30000.00 30000.00

mount unit / floor stand complete with making connections

etc complete as reqd.

5 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 1 6200.00 6200.00

6 MR Supply , Installtion , Testing and Comissioning of sheilded RM 500 57.00

twisted pair CAT 6 cable(STP) complete etc as required 4 pair 28500.00

7 MR SITC of 8 port managed POE switch Nos 1 8000.00

8 MR Supply and Installtion of 18 u rackTransparent Front Toughned Nos 1 25000.00

Glass door with lock, Rear MS Vented door with lock, fixed side

panel, caster weels set of 4 with brackets and network rack

including fan tran, 4 no of wire manager, 1 no of power 25000.00

distrubution board, etc. as per direction of EIC.

Total : A - CCTV 209700.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

TOTAL AMOUNT TOTAL AMOUNT

TOTAL AMOUNT TOTAL AMOUNT

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE

EM 2022 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically

sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules,

microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant,

vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the

rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping.

The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall

be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI

conditions shall not be less than 3.1 and IEER not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF

Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan

section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX

Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports,

vibration isolation, cord less remote control etc., suitable for operation on

2 2.0 single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System. The cooling

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T" Joints

4 4 i.e. Refnet Joints/ Header with Insulation for refrigerant piping

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete

with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including

5 5 accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric

nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid

lines, all accessories as per specifications etc. as required :

5.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 250 245.00 61250.00

5.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 75 331.00 24825.00

5.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 250 466.00 116500.00

5.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 75 588.00 44100.00

5.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 707.00 14140.00

5.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 865.00 17300.00

5.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 1108.00 22160.00

6 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as

Digitally signed by AMIT

Supply, installation, testing and commissioning of PVC drain water with necessary clamps, fittings

8 MR such as bends tees etc. and duly insulated.

40 mm dia (9 mm thick insulation) Rm 400 374.00 149600.00

Total HVAC WORKS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning

the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA sheet, dust and

vermin proof, indoor type TPN Panels with hinged lockable doors fabricated from 2mm thick CRCA

sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear access for cable alley and with

segregated bus-bar chamber with tinned aluminium bus bar and including supplying and fixing

following switchgears, meters and accessories, inter-connections, bonding to earth, powder coated

painting and marking as specified. Switch boards complete as per schematic diagram:or its

equivalent as per the requirement of site

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as detailed in

G.2 MR the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 100 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored sleeves

and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports

& their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 40 Amps, TPN, MCB+ ELCB -2 Nos.

(b) 32 Amps, TPN, MCB + ELCB - 2nos

Panel complete as above Each 1 102895.00 102895.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FAS

FIRE DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

FIRE DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent

1 17.2.4 analog addressable photothermal detector complete with Pcs 25.00 2,858.00 71,450.00

mounting base complete as required.

Supplying, installation, testing & commissioning of addressable

manual call point complete as required.

Supplying, installation, testing & commissioning of addressable

17.2.15 horn cum strobe complete as required. Pcs 1.00 3,506.00 3,506.00

Supplying, installation, testing & commissioning of fault isolator

complete with base as required.

Supplying, installation, testing and commissioning of micro

processor based intelligent addressable main fire alarm panel,

central processing unit with the following loop modules and

capable of supporting not less than 240 devices (including

detectors) and minimum 120 detectors per loop and loop

length up to 2 km, network communication card, minimum 320

character graphics/ LCD display with touch screen or other

keypad and minimum 4000 events history log in the non volatile

memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs

back-up with 24 volt sealed maintenance free batteries with

automatic charger. The panel shall have facility to connect

17.2.1 printer to printout log and

facility to have seamless integration with analog/digital voice

evacuation system (which is part of the schedule of work under

SH: PA System) and shall be complete with all accessories . The

panel shall be compatible for IBMS system with open protocol

BACnet/ Modbus over IP complete as per specifications.

CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,

600/1000V rated with annealed copper conductor having XLPE

insulation, steel wire armouring & FRLS outer sheath complete 36,330.00

Providing and fixing ISI Marked of approved make Fire

Extinguishers complete with all accessories as per

manufacturer's specifications.

CO2 gas nozzle type - 4.5 Litre capacity (IS:15683). NOS 3.00 5,709.53 17,128.59

ABC dry powder stored pressure type 6 kg capacity 3,982.32

Digitally signed by AMIT

Supplying & Fixing of battery operated illiminated "EXIT"

M.R. signage, with 2hrs power Battery backup complete as NOS 4.00 3870.00

required. 15,480.00

Digitally signed by AMIT