REPAIRS AND RECANNING PAINTING AND POLISHING OF STEEL AND WOODEN FURNITURES AT CGAE NEDUMBASSERY CGRA RAMESWARAM CG DHQ 4 AND ICGS BEYPORE

Amount

FD No. - 1031/1032/ 1033/350/ 351(ALMIRAH LARGE / SMALLl/ MEDIUM WITH SHELVES & 1/2 H x1/2 SHELVES)

Material and labour cutting / removing the following corroded / unserviceable parts of Almirah small steel / Almirah lagre steel & replacing following new parts duly fixed complete all as per specified and as directed, shown on drawing and as directed :-

Supply and fix Brass chromium plated handle, 100 mm long, as per Godrej Pattern all as per specified and as directed.

Material & Labour for One side leg of Almirah steel, left or right, 70 mm wide and 100 mm high, open ends bent outwards upto 15 mm, covering the ends of chennel with 70 x 100 mm MS sheet, 1.6 mm thick, welding the channel to bottom of almirah at 50 mm from the side of almirah including 2 coats of synthetic enamel paint olive green colour all as per specified and as directed.

Supply and fix 3 way locking device as per Godrej pattern, fully operational with the existing handle all as per specified and as directed

Supply and fix Steel cup board lock, 50 mm size, 6 lever with stainless steel keys in duplicate as per Godrej pattern all as per specified and as directed.

FD - 84(M)/1004(Table Office Clerk Steel)

Supply & Fix table top with 18 mm thick pre laminated particle board (exterior grade) of size 1200 x 600 mm with teak veneer facing on one side and balancing white on the other side, including 4 mm thick teak wood edging alround the table top and fixing the table top with top frame of table with screws from bottom including taking down of old table top complete all as per specified and as directed.

Supply & Fix lock for table drawer, MS lock, 4 lever, locking bolt and lever shall be brass with stainless steel duplicate keys, duly fixed to the top drawer and providing automatic locking system to other three drawers including taking down of old locks complete all as per specified and as directed.

Supply & Fix new 1 mm MS channel runner of 400mm long folded to make shape duly welded one side to table frame to run the drawers smoothly including taking down old broken channel and make functional all drawers complete all as per specified and as directed.

CHAIR REVOLVING/CHAIR COMPUTER ADJUSTABLE(TP)

Removing existing unserviceable foam and provide new PU foam 50mm thick for seat shall be covered with superior tapestry cloth over a cover of cloth malmal. Cost of tapestry shall not be less than Rs.350 per mtr. Make of PU foam SLEEP WELL (40 density).

Removing existing unserviceable foam and provide new PU foam 50mm thick for back shall be covered with superior tapestry cloth over a cover of cloth malmal . Cost of tapestry shall not be less than Rs.350 per mtr. Make of PU foam SLEEP WELL (40 density).

Removing of existing unservicable base & fixing new base with suitable caster wheels size as per existing size.

Removing of existing unservicable adjustable mechanism and Supply & Fix new suitable adjustable mechanisam, size as per existing size.

Removing of existing broken unservicable rubber handle and Supply & Fix new suitable Rubber handle.

Removing of existing broken unservicable caster wheels size as per and Supply & Fix new suitable Rubber handle.

SOFA SET (FD-373)

Supply & Fix 560 x 530 x 100 mm size polyurethane foam cushion, seat/back, having 40 Density, covered all sides with tapestry cloth costing not less than Rs. 300/- per meter of approved colour / shade / texture suitable for sofa seater for as per drawing FD -373 after removing existing damaged cushion complete all as specified and directed.

SOFA SET (FD-258)

Supply & Fix 560 x 530 x 100 mm size polyurethane foam cushion, seat/back, having 40 Density, covered all sides with tapestry cloth costing not less than Rs. 300/- per meter of approved colour / shade / texture suitable for sofa seater for as per drawing FD -258 after removing existing damaged cushion complete all as specified and directed.

POLISHING OF WOODEN FURNITURE

Material & Labour for preparation of old treated wooden surfaces by cleaning and removing dust, dirt etc and applying two coats of french polish for the following wooden furniture all as shown in drgs and as specified:-

Chair writing. FD-20/280

Sofa set 2 seater. (FD-373)

Sofa set 3 seater. (FD-373)

Sofa set 4 seater. (FD-373)

Sofa set 5 seater (One 3 seater + 2 Single seater) (FD-373)

Table Dining 6 Persons. (FD 273)

Table Dining 8 Persons. (FD/MAP-II/03)

Hat stand With Mirror. ( FD-233)

Table dressing ladies (FD-378)

Table dressing Gents (FD-379)

Teapoy. (FD-278)

Table Centre (FD-274)

Hot case large. (FD-364)

Display Board 150cm x 90cm (TP)

Rifle rack wooden 10 rifles (SF/12/GENWFK)

Table 900 x 600 without drawer (FD-284)

Table 900 x 600 with drawer (FD-283)

Peg table. (FD-384)

Table writing (FD-275)

Dressing mirror MAP (FD/E6/MAP/16)

Chair easy. (FD-229)

Table writing wooden (FD-249)

Stool Dressing Cushioned (FD/E6/MAP/14)

Chair dining with cushion (MAP) (FD/E6/MAP/10)

PAINTING STEEL FURNITURE

Material & Labour for preparing existing treated surfaces and applying one coat of synthetic enamel paint light grey / OG for the following steel furniture all as shown in drgs and as specified :-

Almirah large steel with shelves. (FD-1032)

Almirah Medium steel with shelves. (FD-1031)

Locker bed side steel. ( FD-1029)

Book case steel. (FD-1028)

Stool steel. (FD-119(M))

Table office clerk steel. ( FD-1004)

Table office officer steel. ( FD-1003)

Table 900 x 600mm steel with drawer ( FD-1008)

Chair CBA steel. ( FD-75)

Material & Labour for preparation of old painted surfaces and applying one coat of synthetic enamel paint black for the following steel furniture by spray painting all as shown in drgs & as specified :-

Charpoy IP with hard top (MAP) (FD/MAP-II/01)/(FD/MAP/08/(R))

Table Bed side steel (FD/E6/MAP/15(R))

Teapoy verandha (FD/E6/MAP/17)

Chair verandha (FD/E6/MAP-11/06)

SIDE BOARD (FD No. - 241/372)

Material & Labour for removal of existing damaged Top of Side Board and replacing the same with new Top using 18mm pre-laminated particle board of size 1025 mmx 450mm with teak facing on tope side fpr fixed and all as shown on drg and as specified.

Material & Labour for removal of existing damaged left sides of table Side Board and replacing the same with new side using 18mm prelaminated particle board of size 750 x 450 mm with teak facing on one side and 4mm teak wood beading on the front edge including french polishing on wooden parts and fixed all as shown on drg and as specified.

Material & Labour for removal of existing damaged right sides of table Side Board and replacing the same with new side using 18mm prelaminated particle board of size 750 x 450 mm with teak facing on one side and 4mm teak wood beading on the front edge including french polishing on wooden parts and fixed all as shown on drg and as specified.

Material & Labour for removal of existing damaged back ply of Side Board and replacing the same with new 6 mm thick commercial ply of size 1025 x 750 mm including french polishing on wooden parts and fixed all as shown on drg and as specified

Material & Labour for removal of existing damaged /broken S/Steel Handle of Side Board and replacing the same with new and fixed all as shown on drg and as specified

Material & Labour for Removal of existing damaged /broken 18mm thick prelaminated Particle Board pull out Tray with telescopic channel of table bed side and replacing the same with new and fixed all as shown on drg and as specified.

HOT CASE LARGE (FD No. - 364)

Material & Labour for removal of existing damaged Top of hot case large and replacing the same with new Top using 18mm pre-laminated particle board of size 1350 mmx 540mm with teak facing on tope side fpr fixed and all as shown on drg and as specified.

Material & Labour for removal of existing damaged left sides of hot case large and replacing the same with new side using 18mm prelaminated particle board of size 840 x 540 mm with teak facing on one side and 4mm teak wood beading on the front edge including french polishing on wooden parts and fixed all as shown on drg and as specified.

Material & Labour for removal of existing damaged right sides of hot case large and replacing the same with new side using 18mm prelaminated particle board of size 840 x 540 mm with teak facing on one side and 4mm teak wood beading on the front edge including french polishing on wooden parts and fixed all as shown on drg and as specified.

Material & Labour for removal of existing damaged back ply of hot case large and replacing the same with new 6 mm thick commercial ply of size 1350 x 840 mm including french polishing on wooden parts and fixed all as shown on drg and as specified

Material & Labour for removal of existing damaged /broken S/Steel Handle of hot case large and replacing the same with new and fixed all as shown on drg and as specified

CANING OF CHAIR DINING/WRITING/EASY (FD No. -158/280/250/229)

Material & Labour for Canning chair dinning (FD-158), chair writing(FD-250/280), chair easy(FD-229) with new plastic cane of size 1.8x0.46mm and boarder with 3.0x0.60mm size cane as per Godrej Pattern including taking out old/damaged plastic cane from the aforesaid furnitures and cleaning the entire surface of furniture complete all as shown on drg and all as per specified and as directed.

CANNONG OF CHAIR DINING WITH CUSHION (FD/MAP-II/04)

Removing existing old cushion seat and supply and fix of size 75 mm thick size foam cushion, seat/back, having 40 Density, covered all sides with tapestry cloth over a cover of cloth malmal superior quality costing not less than Rs. 350/- per meter of approved colour / shade / texture suitable for chair dining for as per drawing FD/MAP-II/04 complete all as specified and directed . (Make of PU foam: Sleep well (40 density)

Supply and fix PVC rubber good quality as per sample complete all as shown on drg and all as per specified and as directed.

CHAIR WRITING (FD/MAP/E6/12)

Removing existing old cushion seat and supply and fix of size 500x450x50 mm foam cushion, seat/back, having 40 Density, covered all sides with tapestry cloth over a cover of cloth malmal superior quality costing not less than Rs. 350/- per meter of approved colour / shade / texture suitable for chair writing for as per drawing FD/MAP/E6/12 complete all as specified and directed. (Make of PU foam: Sleep well (40 density)

Removing existing old cushion seat and supply and fix of size 500x350x50 mm foam cushion, seat/back, having 40 Density, covered all sides with tapestry cloth over a cover of cloth malmal superior qualoity costing not less than Rs. 350/- per meter of approved colour / shade / texture suitable for chair writing for as per drawing FD/MAP/E6/12 complete all as specified and directed. (Make of PU foam: Sleep well (40 density)

Supply & Fix arm rest/ handle made of black integral skin polyurethane including taking down complete all as specified and directed.

CHARPOY IP WITH HARD TOP (MAP) (FD/MAP-II/01)/(FD/MAP/08/(R))

Material & Labour for 12mm (6'x3')thick phenol bonded commercial plywood ISI marked as in bed hard (Drg No FD/MAP/08(R)), placed on top of 25x25x1.25mm thick MS square tube stiffner including taking out old unserviceable plywood complete all as specified and directed.

Material & Labour for 25x25x1.60mm guage MS tube frame, 900mm long, as in stiffner of charpoy with hard top, welded to side rail (Drg No FD/MAP/II/01) including taking out old unserviceable MS tube complete all as specified and directed.

Material & Labour for 25x65x16mm guage MS tube frame, 2050mm long, side rail of charpoy with hard top, welded to side leg (Drg No FD/MAP/II/01) including taking out old unserviceable MS tube complete all as specified and directed.

Material & Labour for 25x65x16mm guage MS tube frame, 900mm long, head rest and foot rest side rail of charpoy with hard top, welded to side leg (Drg No FD/MAP/II/01) including taking out old unserviceable MS tube complete all as specified and directed.

Supply & Fix PVC inner shoe suitable for 19mm dia MS pipe leg of chair verandah including taking down complete all as specified and directed. (FD-256)

Material & Labour for 38x38x16mm guage MS tube frame, 400mm long, foot rest leg of charpoy with hard top, welded to long rail (Drg No FD/MAP/II/01) including taking out old unserviceable MS tube complete all as specified and directed.

Material & Labour for 38x38x16mm guage MS tube frame, 800mm long, head rest leg of charpoy with hard top, welded to long rail (Drg No FD/MAP/II/01) including taking out old unserviceable MS tube complete all as specified and directed.

Material & Labour for 18 mm thick pre laminated particle board (exterior grade) pre laminated one side with decorative choice lamination of size 630 x 185 mm screwed to MS strip, are welded to 18m rectangular pipe as in head board and foot board of bed hard drawing FD/MAP/08(R) including taking down of old unserviceable board complete all as per specified and as directed.

Schedule of Credit (Minus) Rs. 6,441.00 NOTE: Bidder shall insert credit amount of Rs. 6,441.00 as rate in Green field under Col-5.

Albert Rebello and Company