GE P/DDN/T-32 OF 23-24

Amount

S&F LED flood light 210 or higher watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp die-cast IP 66 aluminum housing, , required to fix with existing bracket complete with all accessories all as directed incl taking down existing fitting complete all as specified and directed.

All as per item No 2 here-in above but flood light of 170 Watt

All as per item No 2 here-in above but flood lights 100 Watts

All as per item No 2 here-in above but flood light 70 Watt

Cutting existing road/hardstand of any type by using crow bar chisel up to a depth of 30 cm for laying GI pipe including making good the surface by returning filling watering ramming in layers 150 mm thick PCC 1:2:4 over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 25 cm thick complete all as specified and directed.

M&L for GI Tubing Light grade (ISI marked) with all fitting/accessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc all as specified and directed of size 50mm dia complete all as specified and directed.

Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unsv LT Cable for laying of cable and getting out complete all as specified and directed.

M&L for Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundation of stay assembly etc including necessary form work, all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping around poles , including necessary form work finishing even and smooth without using extra cement complete all as specified and directed.

M & L for painting to steel pole any type after scrapping and rubbing down with sand paper preparation of old or new surface of poles including pole fittings such as cross arms of any description, anti-climbing devices, nut, bolts etc.and applying two coats of aluminum paint including numbering of poles as per existing making 5 Nos of alternative strips of black, yellow paint of 30 Cm wide complete all as directed.

Dismantling existing steel poles/ struts, any size carefully for reuse including necessary excavation demolition of concrete shifting cost etc. and removing the old unserviceable rubbish etc complete all as specified and directed.

Supply, installation, Testing and Commissioning Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 metres long) complete all as specified

M&L GI bracket made out of 40 mm GI pipe medium grade bend for fabrication to shape as required length of pipe 1.2 mtr with necessary fixing arrangement by means of MS clamps 02 Nos not less than 50x6 mm MS flat duly painted, nuts, bolts and washer complete all as specified and directed.

S&F junction box made of glass fibre reinforced and transparent poly carbonate of size 126x228x111, KV PC 8104 with IP 65 protection including MCB SP, 6 Amps 1 No and suitable size clamps fixing for pole/in pcc foundation etc,complete all as specified and directed.

Taking down and dismantling of street light fittings of any type size and model (FTL, ES, HPSV,MVL,MH, floodlight Fittings etc), and depositing the same to MES store yard for repair if any required complete all as specified and directed.

S&F LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete required to fix with existing bracket of min 40 mm dia complete all as specified and directed.

M & L for laying or passing through pipe LT UG XLPE insulated, armoured heavy duty 1100 volts grade with aluminum stranded conductor of size 16 sq mm, 4 core complete all as specified and directed.

ditto all as here-in above but 10 sq mm 4 core

ditto all as here and above but 10 sqmm 2 core

S&F of twin core unarmoured round/flat PVC cable 10 sq mm aluminum conductor cable (Service Cable) suspended with No.8 SWG GI wire and cable tie at distance of 01 mtr duly connected with earthing and clamp etc from Pole to pole complete all as specified and directed.

M & L for drawing of 3 core 1.5 Sqmm copper conductor cable in existing pole incl making holes for cable entry and exist near to light fitting and junction box complete all as directed.

S&F of coil for contactor 40 Amps to 80 Amps as per existing sample complete incl taking out existing and necessary connections complete all as specified and directed.

Supply and fix LT junction box for street light, sheet moulding compound (SMC) type with hinged type door and locking arrangement, off white colour, of size 300 x 200 x 105mm (internal) comprising of suitable size Aluminium busbar 3 rows with terminals,1 No bakelite base neutral link and 01 No earthing terminal bolt and nut and connecting up cables with aluminum terminal lugs complete all as specified and directed.

Supply and fixing of GI Pole of size 80mm dia medium grade of 8.5 mtr as per site requirement complete all as specified and directed.

Supply & Laying of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of DWC 63/50 sqmm size polyethylene including coupler & Bend with smooth internal and profiled external surface for under ground cable protection complete all as specified. Make : Rex Poly Extrusion Ltd/ Tirupati Plastomatics.

Supply and fix high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches size 50mm bore complete all as specified and directed.

S&F Anti-climbing device spikes type fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the LT pole including painting with two coats of synthetic enamel black paint over a coat of red oxide all as specification and directed as site requirement.

Ansh Enterprises

G M CONSTRUCTION COMPANY

P S TRADERS