Proposed Construction of BSUP Project Building No. 5 at Janata Nagar in MBMC area.

Amount

Description

ITEM NO 01 Providing detailed geological reports of proposed site by maintaining geotechnical investigation of structure stratification collecting soil, rock and ground water samples for laboratory tests to arrive the foundation design parameters . Rock properties such as type of rock, jointing fractures, etc. complete with suggestion about the site foundation and remedies SSR 1.57/--

ITEM NO.02 Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression / pit if any. SSR 2.01/--

ITEM NO.03 Cutting down trees including trunks and branches with girths above 60cm to 90cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any. SSR 2.02/--

ITEM NO 04 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means SSR 21.02 / 197

ITEM NO 05 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 4.5m.) By Mechanical Means SSR 21.04 / 197

ITEM NO 06 TRANSPORTING OF EXCAVATED MATERIALS lead 20.00 k.m.

ITEM NO.07 Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) SSR 12.23/--

ITEM NO 08 Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper. SSR 21.25/--

ITEM NO 09 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. SSR 21.38 / 201

ITEM NO 10 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/ quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 24.10 / 227(PCC)

ITEM NO 11 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. SSR 21.36/--

ITEM NO 12 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. SSR 21.37 / 201

ITEM NO 13 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 25.13 / 230

ITEM NO 14 Providing and laying Cast in situ/Ready Mix cement concrete M30 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curingetc. complete, (Excluding reinforcement and structural steel). withfully automatic micro processor based PLC with SCADA enabled reversible DrumTypemixer/concrete Batch mixplant(Panmixer)etc.complete.Withnaturalsand/V.S.I. quality Artificial Sand SSR 25.35/--

Upto Plinth Level

Plinth to 1st Floor

1st Floor to 2nd Floor

2nd Floor to 3rd Floor

3rd Floor to 4th Floor

4th Floor to 5th Floor

5th Floor to 6th Floor

6th Floor to 7th Floor

7th Floor to 8th Floor

8th Floor to 9th Floor

9th Floor to 10th Floor

10th Floor to 11th Floor

11th Floor to 12th Floor

12th Floor to 13th Floor

13th Floor to 14th Floor

14th Floor to 15th Floor

15th Floor to 16th Floor

16th Floor to Terrace Floor

ITEM NO 15 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 25.54 /235

Plinth Beam

1st Floor Beam

2nd Floor Beam

3rd Floor Beam

4th Floor Beam

5th Floor Beam

6th Floor Beam

7th Floor Beam

8th Floor Beam

9th Floor Beam

10th Floor Beam

11th Floor Beam

12th Floor Beam

13th Floor Beam

14th Floor Beam

15th Floor Beam

16th Floor Beam

Terrace Floor Beam

ITEM NO 16 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 25.74 / 237

1st Floor Slab

2nd Floor Slab

3rd Floor Slab

4th Floor Slab

5th Floor Slab

6th Floor Slab

7th Floor Slab

8th Floor Slab

9th Floor Slab

10th Floor Slab

11th Floor Slab

12th Floor Slab

13th Floor Slab

14th Floor Slab

15th Floor Slab

16th Floor Slab

Terrace Floor Slab

ITEM NO 17 Providing & casting in situ cement concrete of.. specified grade of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).With With SCADA with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer C) M-30 Spec. No.: Bd.F.9 Page No. 95 DSR 15-16

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

Terrace Floor

ITEM NO 18 Providing and casting in situ cement concretespecified of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including plywood/steel centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With......... Spec. No.: Bd.F.8 Page No. 93 DSR 19/4(A)-c

ITEM NO.19 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 26.23 / 241

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

Terrace Floor

ITEM NO 20 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 80 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both sides, fixing in cement mortar 1:3 and curing etc .complete. SSR 26.47/--

ITEM NO.21 Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete SSR 31.01/--

ITEM NO 22 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR 26.33 / 245

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 23 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and on coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. SSR 23.04 / 223

ITEM NO 24 Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. SSR 32.26/--

ITEM NO 25 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR 27.05 / 254

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 26 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR 32.11 / 269

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 27 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 32.04 / 268

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 28 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring SSR 33.40 / 279

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 29 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting SSR 33.41 / 279

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 30 Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. SSR 33.06 / 273

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 31 Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. SSR 33.24 / 276

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 32 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. SSR 33.25 / 277

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 33 Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. SSR 33.18 / 276

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 34 Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete. SSR 33.48 / 280

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO.35 Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) SSR 41.78/---

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 36 Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete SSR 39.01 / 313

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 37 Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary. SSR 34.09/--

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 38 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. SSR 39.09 / 314

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 39 Providing and fixing FRP Door Shutter 35 mm thick Factory Made Shutter SSR 54/--

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 40 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. SSR 40.02 / 338

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 41 Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box SSR 39.41 / 323

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 42 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. SSR 39.37 / 321

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 43 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR 39.68 / 331

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO 44 Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). SSR 39.26 / 319

ITEM NO 45 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) SSR 39.24 / 318

ITEM NO 46 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.NOTE: For Item No. 15 to 18 prior approval ofSuperintending Engineer will be necessary SSR 35.26 / 289

ITEM NO 47 Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. SSR 32.34/--

ITEM NO 48 Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. SSR 36.03/--

ITEM NO 49 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to hal depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. SSR 31.04 / 263

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

TERRACE

ITEM NO 50 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10years guarantee on court fee stamp paper of Rs.500/-including ponding test etc. complete. SSR 31.05 / 264

Ground Floor

1st Floor

2nd Floor

3rd Floor

4th Floor

5th Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

12th Floor

13th Floor

14th Floor

15th Floor

16th Floor

ITEM NO.51 Providing & Fixing of signage using 304 Stainless steel letters for the front & side fascia and 5mm thick acrylic molded letters, for back fascia moulded letters with height 24 inches, with necessary power supplies for connection, including profile LED back lighting (MR)

ITEM NO.52 Erection & Commissioning of Lift for 6 Passenger For G+16 Residential Building. MR

ITEM NO 53 Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint) SSR 41.56/--

ITEM NO 54 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) SSR 31.12/--

ITEM NO 55 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) SSR 31.13/--

ITEM NO.56 NON -DESTRUCTIVE TEST Rebound Hammer Test. SSR 97/545

ITEM NO.57 NON -DESTRUCTIVE TEST Ultrasonic Pulse Velocity SSR 98/545

ITEM NO.58 C.I.Man hole cover 100 kg. SSR 51/--

ITEM NO.59 Royalty for material

PLUMBING

SANITARY FIXTURES

ITEM NO.60 Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) SSR 43.23

ITEM NO.61 Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. SSR 42.80

ITEM NO.62 Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. (SHOWER/ WASHING MACHINE) SSR 42.83

ITEM NO.63 Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. SSR 42.82

ITEM NO.64 Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. SSR 41.69

ITEM NO.65 Providing and fixing C.P. Angular stop cock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. SSR 42.79

ITEM NO.66 Providing and fixing 15 cm rigid PVC Multi floor trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use). MR

ITEM NO.67 Providing and fixing 10 cm PVC nahani trap with grating etc. (for Balcony) complete. SSR 42.67

ITEM NO.68 Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent ?make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. SSR 42.81

INTENAL WATER SUPPLY SYSTEM

ITEM NO.69 Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

a) 15mm dia. SSR 42.55

b) 20mm dia. SSR 42.56

c) 25mm dia. SSR 42.57

f) 32mm dia SSR 42.58

g) 40mm dia. SSR 42.59

h) 50mm dia. SSR 42.60

i) 75/80mm dia. MR

j) 100mm dia. MR

Note: Vendor to include cost of 9mm thick nitrile rubber insulation for hot water at terrace level.

ITEM NO.70 Providing and fixing gun metal ball valves confirming to IS 1703 with threaded/flanged joints complete with nuts, bolts, gaskets etc. MR

a) 15 mm dia

a) 25 mm dia

c)32 mm dia

d) 40 mm dia

e) 50 mm dia

ITEM NO.71 Supplying & installing gun metal gate valve of size 25mm dia as per specification No. FF-VL/GV MR

ITEM NO.72 Air Realesed Valve (ARV) Supplying and erecting 20/25 mm dia gun metal air realesed cock with neccesory GI coupling to be fitted on top FF/FFA/ARV MR

ITEM NO.73 Providing and fixing 50mm diameter water meter with non return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber] SSR 41.30

SOIL, WASTE, VENT & RAIN WATER PIPES

ITEM NO.74 Providing, fixing, jointing, testing and commissioning of UPVC SWR pipe confirming to IS : 13592, cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) & vent cowl. Fixing at wall / ceiling level supported by G.I. clamps, hangers etc. duly epoxy coated. MR

a) 40 mm dia.

b) 50 mm dia.

c) 75 mm dia.

d) 110 mm dia.

e) 150 mm dia.

f) 200 mm dia.

g) 250 mm dia.

h) 300 mm dia.

ITEM NO.75 Supplying and fixing of 160MM DIA Leaf trap with kurra made out of UPVC with flange and grating for rain water outlets on terrace etc., complete. MARKET RATE

PUMPS

ITEM NO.76 Supplying and erecting ISI mark Centrifugal water pump (Monoblock) 415V, three phase 50 cycles A.C.supply of 7.5 HP with discharge 4.5/8.6 Liters per second (LPS) for head of 32/52 m and 65 mm suction/ 50 mm delivery pipe of size or with discharge of 11.1/19.9 Liters per second (LPS) for head of 16/30m and 80 mm suction/ 65 mm delivery pipe of size,on provided c c foundation as per specification No. WP-CGP DSR 12-1-11

DOMESTIC PUMP FLOW RATE- 4.5 LPS (2 working + 1 standby)

HEAD- 38 M

ITEM NO.77 Supplying and erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C.supply of 3 HP with discharge 2 /4.9 Liters per second (LPS) for head of 14/36 and 50 mm suction/ 40 mm delivery pipe on provided c.c. foundation as per specification No. WP-CGP DSR 12-1-6

FLUSHING PUMP FLOW RATE- 2.3 LPS (2 working + 1 standby)

HEAD- 38 M

ITEM NO.78 Supplying and erecting submersible pump set suitable for erection on open well of required HP with 415 V 50 c/s.A.C. supply, having delivery head from 21 to 7 m and discharge from 200 to 800 Itrs. per minute (Max efficiency at 16 m head & 500 Itr discharge) & delivery pipe of necessary diameter erected with necessary H type clamps as per specification No. WPOSP DSR 12-4-1

SUMP PUMP FLOW RATE- 3.0 LPS

HEAD- 09 M

SOLID HANDLING 10/12 MM

ITEM NO.79 Supplying and erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C.supply of 3 HP with discharge 4.9 /9.2 Liters per second (LPS) for head of 10/26 m and 65 mm suction/ 50 mm delivery pipe on provided c.c. foundation as per specification No. WP-CGP DSR 12-1-7

FLUSHING PUMP FLOW RATE- 2.3 LPS (2 working + 2 standby)

HEAD- 21 M

ITEM NO.80 Supplying and erecting Centrifugal water pump (Monoblock), 230 V, single phase 50 cycles A.C.supply of 0.5 HP of specified discharge, head & size of suction, delivery pipes, on provided C.C.foundation as per specification No. WP-CGP DSR 12-1-1

FLUSHING PUMP FLOW RATE- 3.35 LPS (2 working + 2 standby)

HEAD- 21 M

ITEM NO.81 Providing and fixing gun metal Y Strainer confirming to IS and tested to a pressure not less than , including rubber gasket, flanges, unions, nuts, bolts and washer etc complete as required. MR

a) 75 mm dia

b) 50 mm dia

ITEM NO.82 Providing and fixing gun metal Non Return Valve confirming to IS 778 and tested to a pressure not less than 10 Kg/cm2, including rubber gasket, flanges, unions, nuts, bolts and washers etc complete as required. MR

a) 75 mm dia

b) 50 mm dia

ITEM NO.83 Providing and fixing gun metal ball valves confirming to IS 1703 with threaded/flanged joints complete with nuts, bolts, gaskets etc. MARKET RATE

b) 75 mm dia

b) 50 mm dia

ITEM NO.84 Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc. as per requirement in an approved manner as per specification No. FF-FFA/PG MR

ITEM NO.85 Supplying & erecting Water level controller 230/415 V AC., Two way for under ground tank operation only. MR

ITEM NO. 86 Providing and fixing pressure reducing station for cold & hot water supply comprising of 2 Nos Gun Metal ball valves on inlet & outlet, 1 No pressure reducing valve with flanged connection, 1 No. `Y' strainer, 2 Nos Pressure gauge on inlet & outlet, and 1 No. 15 mm dia safety valve. The complete system is tested to a pressure not less than 20 Kg/Sq.cm and suitable to reduce the pressure upto 3 Kg/Sq.cm) Including flanges/ unions, nuts, bolts and washers complete as required. MR

50 mm dia (Brass Housing - PRV)

SOLAR HOT WATER SYSTEM

ITEM NO. 87 Supply, installation, testing & commissioning Solar hot water system for 30CUM/day capacity, including black painted copper collector panel, calorifier tank, hot water mixing tank, necessary valves & fittings,distibution loop piping & its insulation with 2 nos. of pump (1W+1S) of suitable head.

ELECTRICAL (PLUMBING PUMP )

STARTRERS

ITEM NO.88 Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 7.5 H.P. .(Similar to L & T make MK-1 DOL Model) DSR 12-5-2

WIRES/ CABLES

ITEM NO.89 Supplying, erecting & terminating PVC armoured cable 4 core 6 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU DSR 7-2-10

ITEM NO.90 Supplying, erecting & terminating PVC armoured cable 4 core 4 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU DSR 7-2-9

ELECTRICAL

ENERGY METER

ITEM NO.91 Supplying and erecting kWH meter provided with maximum kW demand indicator for unbalanced load 3 phase 4 wire 50 cycles 230/440V AC supply with incorporated time switch of 30 minutes integration period and of 15 seconds tune required for decoupling, suitable to work on provided three numbers of instrument current transformers of class C accuracy with ratio 100/5 A -400/5 A complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs. DSR 6-3-5

ITEM NO.92 Supplying & erecting Static energy meter 230V, 50 cycles AC supply 5/10/20/40 A Class I accuracy I.S.I. marked with metal/polycarbonate enclosure. Meter with LCD/ LED display complete erected on polished T.W. board duly wired with required size of weather proof PVC wires duly tested for classII accuracy by electric supply company. DSR 6-3-2

ITEM No. 93 Supplying and erecting rigid PVC conduit 25 mm dia. With PVC accessories on wall / ceiling as per specification No: WGMA/CON, para no. 1.1.1 DSR 1-2-8

ITEM NO. 94 Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete. DSR 6-1-15

METER ROOM BUS-BAR

BUS BAR CHAMBER

ITEM No 95 Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars, 500V 400A complete as per specification no. CP-BB DSR 6-2-5

INCOMER TO BUSBAR CHAMBER

ITEM NO.96 Incomer to busbar chamber Providing & erecting 4 Pole MCCB of 315/400A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB DSR 5-5-4

ITEM NO.97 Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B. /T.P. M.C.B. /F.P M.C.B. complete erected on angle iron frame. 5-4-23

ITEM NO.98 Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB 5-3-7

ITEM NO.99 Supplying & erecting ISI marked HRC fuse cartridge 500V 300A DSR 5-10-20

ITEM NO. 100 Supplying & erecting fuse bridges with base H.C. type fuse links 500V 300A erected on polished wooden block. DSR 5-10-12

ITEM NO.101 Supplying and erecting bakelite fuse fitting suitable for HRC bolted type fuse up to 32A without fuse. DSR 5-10-13

ITEM NO.102 Supplying & erecting ISI marked HRC fuse cartridge 500V 32A DSR NO.- 5-10-16

CABLE TRAY

ITEM NO. 103 Providing & erecting Hot deeped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner. Anchor fastner & nut bolts of adequate size - 16 nos.( 2 nos. per each support) DSR 7-11-10

DISTRIBUTION BOARDS

12 WAY VTPN DB- LIFT

INCOMER

ITEM NO.104 Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted SP /TP MCBs of total 12 ways, on iron frame/wooden board.(Vertical Busbar type) as per specification No. SW-SWR/MCBDB DSR 5-4-4

ITEM NO.105 Supplying, erecting & marking FP MCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-17

OUTGOING

ITEM NO.106 Supplying, fixing and commissioning RCCB+MCB, electro magnetic type with 30/100/300 mA sensitivity and having capacity of 32/40A 4 Pole 3 phase as per specification No. SW-RCCB/RCCB DSR 5-6-13

ITEM NO.107 Supplying, erecting & marking DPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-7

8 WAY SPN DB- FLAT DB

ITEM NO.108 Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 8 ways for outgoing SP MCB’s on iron frame/wooden board as per specification No. SW-SWR/MCBDB DSR 5-4-15

INCOMER

ITEM NO. 109 Supplying, fixing and commissioning RCCB+MCB, electro magnetic type with 30/100/300 mA sensitivity and having capacity of 32A/40A 2 Pole 1 phase as per specification No. SW-RCCB/RCCB DSR-5-6-10

OUTGOING

ITEM NO. 110 Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-3

4 WAY SPN DB- SHOPS

ITEM NO.111 Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 4 ways for outgoing SP MCB’s on iron frame/wooden board as per specification No. SW-SWR/MCBDB DSR 5-4-14

INCOMER

ITEM NO. 112 Supplying, fixing and commissioning RCCB+MCB, electro magnetic type with 30/100/300 mA sensitivity and having capacity of 6/10/16/20/25A, 2 Pole, 1 Phase as per specification No. SW-RCCB/RCCB DSR-5-6-9

OUTGOING

ITEM NO. 113 Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-3

08 WAY SPN DB- COMMON AREA LIGHTING

Incomer

ITEM NO. 114 Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 8 ways for outgoing SP MCB’s on iron frame/wooden board as per specification No. SW-SWR/MCBDB DSR 5-4-15

ITEM NO 115 Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB DSR 5-3-7

OUTGOING

ITEM NO.116 Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-3

04 WAY SPN DB-EMERGENCY

ITEM NO. 117 Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 4 ways for outgoing SP MCB’s on iron frame/wooden board as per specification No. SW-SWR/MCBDB DSR 5-4-14

ITEM NO.118 Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 16/25 A. 2 pole complete as per specification No. SW-RCCB/RCCB DSR 5-6-1

ITEM NO.119 Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-3

36 WAY VTPN DB- PLUMBING GROUND LEVEL

INCOMER

ITEM NO.120 Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted SP /TP MCBs of total 36 ways, on iron frame/wooden board.(Vertical Busbar type) as per specification No. SW-SWR/MCBDB DSR 5-4-6

ITEM NO.121 Supplying, erecting & marking FP MCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-17

OUTGOING

ITEM NO.122 Supplying, erecting & marking FPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-316

12 WAY VTPN DB- PLUMBING TERRACE LEVEL

INCOMER

ITEM NO.123 Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted SP /TP MCBs of total 12 ways, on iron frame/wooden board.(Vertical Busbar type) as per specification No. SW-SWR/MCBDB DSR 5-4-6

ITEM NO.124 Supplying, erecting & marking FP MCB 6A to 32A in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-16

OUTGOING

ITEM NO.125 Supplying, erecting & marking FPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB DSR 5-316

PANELS

COMMON AREA PANEL

INCOMER

ITEM NO.126 Providing & erecting 4 Pole MCCB of 315/400A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB DSR 5-5-4

ITEM NO. 127 Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. DSR 6-5-7

ITEM NO. 128 Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-1

ITEM NO. 129 Providing and erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio with 15VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. DSR 6-5-2

OUTGOING

ITEM NO. 130 Providing & erecting 4 Pole MCCB of 200 A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB DSR 5-5-2

ITEM NO. 131 Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-16

ITEM NO. 132 Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-17

ITEM NO. 133 Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB DSR 5-3-7

FIRE FIGHTING PANEL

ITEM NO. 134 Providing & erecting Floor / Wall mounting, MCCB Panel board suitable for Four Pole Incoming 250A, 6 ways Four pole outgoing on provided iron frame, as per Specification No SW-SWR/MCCBPB. (Excluding MCCB'S) DSR 5-7-3

ITEM NO. 135 Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. DSR 6-5-7

ITEM NO. 136 Providing & erecting 4 Pole MCCB of 200 A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB DSR 5-5-2

OUTGOING

ITEM NO. 137 Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron frame/wooden board as per specification No. SW-SWR/MCCB DSR 5-5-1

ITEM NO. 138 Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-16

BUSBAR

ITEM NO. 139 Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB DSR 6-2-11

ITEM NO. 140 Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treament and duly power coated or painted with one coat of red lead paint and 2 coats of enamel paint as directed. DSR 6-1-1

ISOLATOR, ENCLOSURE

ITEM NO. 141 Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB DSR 5-3-17

ITEM NO.142 Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B. /T.P. M.C.B. /F.P M.C.B. complete erected on angle iron frame. DSR 5-4-23

WIRING AND ACCESSORIES

MAIN WIRING -FLAT AND SHOPS

ITEM NO. 143 Supplying & erecting mains with 2x4 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG DSR 1-3-8

ITEM NO-144 Supplying & erecting mains with 2x 6 sq.mm F.R L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW DSR 1-3-10

ITEM NO.145 Supplying & erecting ISI mark Rigid PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per pecification No: WG-MA/CC, para no.1.2.1 DSR 1-1-9

ITEM NO. 146 Supplying & erecting telephone cable 2 pair with 0.5 mm dia. laid in provided PVC casing / conduit as per specification No. WG-TW DSR 1-10-2

ITEM NO. 147 Supplying and fixing Cat-6 LSZH cable suitable for LAN / WAN as per specification in approved manner DSR 1-12-2

ITEM NO. 148 Supplying & installing Co-axial cable low voltage grade RG-11 as per specification No. WG-TW DSR 1-10-19

POINT WIRING

ITEM NO.149 Supplying and Drawing of 2x1.5 sq.mm. FR grade copper wires in provided concealed pipes for concealed type light/fan/bell point wiring and terminating on modular accessories in box for point wiring for light/fan/bell as per specification No: WG-PW/CW DSR 1-9-10

ITEM NO.150 Supplying & erecting ISI mark Rigid PVC conduit 20mm dia. with necessary accessories in wall/floor with chiselling appropriately as per pecification No: WG-MA/CC, para no.1.2.1 DSR 1-1-8

ITEM NO.151 Supplying & erecting ISI mark Rigid PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per pecification No: WG-MA/CC, para no.1.2.1 DSR 1-1-9

ITEM NO. 152 Supplying and drawing of 2x1.5 sq.mm. FR grade copper wires with 1.5 sqmm earthwire in provided concealed pipes and terminating on moduler accessories in box for point wiring for independent plug as per specification No WG-PW/SW DSR 1-9-12

ITEM NO.153 Supplying & erecting mains with 3x2.5 Sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW DSR 1-3-14

ITEM NO. 154 Supplying & erecting mains with 3x4 sq.mm F.R L.S. copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW DSR 1-3-16

ITEM NO.155 Supplying & erecting mains with 2x1.5 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW (Earth wire of green colour) DSR 1-3-1

MODULAR SWITCHES AND ACCESSORIES

ITEM NO.156 Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. DSR 1-8-1

ITEM NO.157 Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. DSR 1-8-2

ITEM NO.158 Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. DSR 1-8-10

ITEM NO.159 Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. DSR 1-8-11

ITEM NO.160 Supplying and erecting modular type switch 16 / 20 A with indicator, ISI mark, approved make duly erected on provided plate and box with wiring connections complete DSR 1-8-6

ITEM NO. 161 Supplying and erecting modular type 3/5 pin25A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. DSR 1-8-11

ITEM NO 162 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiseling and finishing with cement morter / POP as per required to match the background in an approved manner DSR 1-8-35

ITEM NO.163 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. DSR 1-8-36

ITEM NO.164 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. DSR 1-8-37

ITEM NO.165 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. DSR 1-8-38

ITEM NO.166 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. DSR 1-8-39

ITEM NO. 167 Supplying and erecting modular type bell indicator ISI mark approved make duly erected on provided plate and box with wiring connections complete. DSR 1-8-18

ITEM NO.168 Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box. DSR 1-8-25

ITEM NO.169 Supplying and erecting modular type electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. DSR 1-8-23

ITEM NO.170 2-2-13 Supplying and erecting Ding Dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size. DSR 2-2-13

ITEM NO.171 Supplying and erecting modular type computer Jack RJ 45 with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete DSR 1-8-17

ITEM NO.172 Supplying and erecting modular type telephone socket one gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete DSR 1-8-15

ITEM NO.173 Supplying and erecting modular type T.V. socket single outlet ISI mark approved make duly erected on provided plate and box with wiring connections complete DSR 1-8-14

ITEM NO.174 Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. DSR 2-12-5

COMMON AREA WIRING

ITEM NO.175 Supplying & erecting telephone cable 50 pair with 0.5 mm dia. laid in provided PVC casing / conduit asper specification No.WG-TW DSR 1-10-8

ITEM NO.176 Supplying, erecting & commissioning MDF Box 800 x 800 pairs as per specification No. WG-TW DSR 1-11-11

ITEM NO.177 Supplying, erecting & commissioning Junction box suitable for 50 pairs as per specification No. WG-TW DSR 1-11-16

ITEM NO.178 Supplying & installing Co-axial cable low voltage grade RG-11 as per specification No. WG-TW DSR 1-10-19

ITEM NO.179 Supplying & erecting mains with 2x1.5 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW DSR 1-3-4

ITEM NO.180 Supplying & erecting mains with 3x2.5 sq.mm F.R. L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW DSR 1-3-14

ITEM NO.181 Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. DSR 1-8-1

ITEM NO.182 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. DSR 1-8-36

ITEM NO.183 Supplying and erecting Broadband splitter unit with 1 input & 2 out put RJ 11 female connectors. DSR 1-11-23

ITEM NO.184 Supplying & erecting ISI mark Rigid PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per pecification No: WG-MA/CC, para no.1.2.1 DSR 1-1-9

CABLE

Supply, Installation, Testing & Commissioning of 1100V grade, Aluminum/copper conductor, PVC/XLPE Insulated & galvanized steel tape armouring. The cable shall be heavy duty type conforming to IS-1554 & 7098. The cable shall be suitable to lay directly underground in Existing trenches/RCC Ducts/Sleeves/Cable trays. Rate shall be excluding of cabling laying related civil work.

ITEM NO.185 Supplying, erecting & terminating PVC armoured cable 4 core 35 sq mm aluminium conductor with continuous 5.48 sq mm(12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL DSR 7-1-23

ITEM NO.186 Supplying, erecting & terminating PVC armoured cable 4 core 95 sq mm aluminium conductor with continuous 8.35 sq mm (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe asper specification no. CB-LT/AL DSR 7-1-26

ITEM NO.187 Supplying, erecting & terminating PVC armoured cable 4 core 25 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL DSR 7-1-22

ITEM NO.188 Supplying, erecting & terminating PVC armoured cable 4 core 4 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU DSR 7-2-9

ITEM NO. 189 Supplying, erecting & terminating PVC armoured cable 3 core 2.5 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU DSR 7-2-5

ITEM NO.190 Supplying, erecting & terminating PVC armoured cable 4 core 16 sq mm copper conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU DSR 7-2-12

CABLE TERMINATION (FOR XLPE / PVC CABLES)

ITEM NO.191 Supplying & erecting Siemens type brass cable glands for 4 core 35 Sq.mm./3 core 50 Sq.mm. for PVC armoured cable as per specification no. CB-GL DSR 7-7-4

ITEM NO.192 Supplying & erecting Siemens type brass cable glands for Each 83 29 112 3½ core 95 sq mm for PVC armoured cable as per specification No. CB-GL DSR 7-7-7

ITEM NO.193 Supplying & erecting Siemens type brass cable glands for 3 to 4 core 16 sq mm /3 to 4 core 25 sq mm /3 core 35 sq mm for PVC armoured cable as per specification No. CB-GL DSR 7-7-3

ITEM NO.194 Supplying & erecting Siemens type brass cable glands for 2 to 4 core 2.5 sq mm /2 to 4 core 4 sq mm /2 core 6 sq mm for PVC armoured cable as per specification No. CB-GL DSR 7-7-1

EARTHING & LIGHTNING PROTECTION

ITEM NO. 195 Supplying and erecting G. I. Earth Wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.( 8 SWG AS EARTH MAINS TO APARTEMENTS & SHOPS) DSR 9-2-5

ITEM NO. 196 Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification No. EA-EP DSR 9-1-4

ITEM NO. 197 Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP). ( Strip size = 25x3 mm ) DSR 9-2-3

ITEM NO.198 Providing earthing with Copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg of maintenance free earth conductivity enhancing mineral earthing compound complete with all materials, testing & recording the results as per specification no ESE -LA DSR 9-1-6

TEM NO.199 Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner DSR 9-3-3

ITEM NO.200 Providing earthing with Copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification No. EA-EP DSR 9-1-2

ITEM NO.201 Supplying & laying (including excavation) 15 cm dia RCC Hume pipe with coupling collar of standard thickness at required depth up to 90 cm below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). DSR 7-6-5

ITEM NO.202 Providing & constructing Brick Masonry Inspection Chamber, 90cmX45cmX90cm size, including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight .............. cover with frame fixed in cement concrete etc. complete. Spec. No.: Bd.V.43, Page No. 626 60cm x 45cm x 90cm C. I. lid DSR 15-16

Indoor & Outdoor LED Fittings , Fans , Exhaust Fans(FG-IDF/LED)

ITEM NO.203 Supplying & erecting approved make 1 x 28W T-5 white stove enamelled / powder coated,decorative end caps box type fluo.fitting with 28W electronic ballast having pf>0.9 fixed at ceiling or on wall as per specification No.FG-IDF/BFF DSR 2-4-8

ITEM NO.204 Supplying and erecting WP Street light fitting suitable for 1x 28W T-5 lamp, electronic ballast having pf > 0.9 , with all accessories complete on provided bracket as per specification no. FG-ODF/FSL2 DSR 2-8-8

ITEM NO.205 Supplying and erecting T5 28 W energy efficient fluroscent tube DSR 2-1-14

ITEM NO.206 Supplying & erecting aviation obstruction light consisting of yellow painted die-cast aluminium alloy housing, red coloured polycorbonate dome and accessories suitable for Twin light on provided bracket complete DSR 2-11-2

ITEM NO.207 Supplying and erecting luminaries suitable for CFL 1 X 9 to 11W with electronic ballast fixed on wall / above mirror as per specification no.FG-IDF/ML DSR 2-4-39

ITEM NO.208 Supplying and erecting CFL 9 to 11 W complete with ceramic adopter p.f.more than 0.9 DSR 2-1-21

ITEM NO.209 Supplying & erecting approved make 1 x 18/20W white stove enamelled / powder coated box type fluo.fitting with 20 W electronic ballast having pf > 0.9 fixed at ceiling or on wall as per specification No.FG-IDF/BFF DSR 2-4-8

ITEM NO.210 Compact flou lamp 18 W 230V to be used with provided ballast. DSR 2-1-17

ITEM NO.211 Supplying and erecting regular/ standard model Ceiling fan of 1200 mm. sweep complete erected in position as per specifcation no. FG-FN/CF DSR 2-13-3

ITEM NO.212 Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. DSR 2-12-3

ITEM NO.213 Supplying and erecting ‘B’ grade G.I.pipe/M.S. pipe down rod duly painted for fan complete erected with PVC two core flexible cable 24/0.2 mm copper PVC wire. ( 1 METER EACH) DSR 2-12-6

ITEM NO.214 Supplying and erecting Exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400RPM with condensor complete erected in position with necessary materials. Fanmotor with moisture proof treatment and ‘E’ class insulation and marking Sr. No. & date of erection. DSR 2-13-15

ITEM NO.215 Supplying and erecting regular/ standard model Ceiling fan of 600 mm. sweep complete erected in position as per specifcation no. FG-FN/CF DSR 2-13-3

ITEM NO. 216 Supplying and erecting bulkhead fitting suitable for integral CFL upto 11W fixed on wall. As per specification no.FGIDF/ BHF DSR 2-3-10

ITEM NO. 217 Supplying and erecting approved type LED street light fitting 15 to 24W, having PF > 0.95, class IP 65 or above. Housing of pressure die cast aluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2 DSR 2-9-2

ITEM NO. 218 Supplying and erecting street light Wall bracket made from 25 mm. dia ‘B’class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB DSR 2-6-3

INVERTER

ITEM NO. 219 Supplying & erecting On line UPS pure sine wave of 1 Kva capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification No. AP-UPS DSR 3-7-1

ITEM NO. 220 Supplying and erecting 12 V/200AH TUBULAR Battery with battery terminal wire, duly charged complete with 36 months warranty complete DSR 3-8-6

FIRE ALARM ACCESSORIES (FF-FAAS)

ITEM NO. 221 Supplying, erecting, testing and commissioning Manual Call Point (Pill box) with break glass push button in metal enclosure complete as per specification No. FF-FAAS/MCP DSR 13-10-1

ITEM NO. 222 Supply and erecting hooters with CRCA enclosure complete as per specification No. FF-FAAS/HTR DSR 13-10-2

ITEM NO. 223 Supplying and erecting XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling as per specification No. CB-LT/CU DSR 13-10-4

ITEM NO. 224 Supplying, erecting, testing and commissioning 2 Zone, local signal control panel (LCP) with standard accessories complete as per specification No. FF-FAAS/LCP DSR 13-10-15

FIRE SEALANT SYSTEM (FF-FRM)

ITEM NO. 225 Supplying and erecting Fire resistant Mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings with all kinds of cables, pipes and cable support system in steel and aluminium and plastic profiles ( Except hollow core conductors). The residual openings shall be closed with filler, as per specification No. FFFRM DSR 13-13-1

ITEM NO. 226 Supplying, erecting, testing and commissioning amplifier 120 W for Public address system suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply as per specification No. FFPA/ AFR DSR 13-11-1

ITEM NO. 227 Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification No. FFPA/ SOC DSR 13-11-2

ITEM NO. 228 Supplying & erecting ISI mark Rigid Steel conduit 16 SWG 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC, para no.1.2.3 DSR 1-1-1

ITEM NO. 229 Supplying and erecting XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling as per specification No. CB-LT/CU DSR 13-10-4

FIRE FIGHTING

FIRE FIGHTING EQUIPMENTS

ITEM NO.230 Supplying and installing fire brigade Header of 150 mm Ø, for supplying water in fire tank as per specification No. FF-FA/FBC DSR 13-8-13

ITEM NO.231 Supplying and installing Air Vessel of 300 mm Ø 1.5m in height M.S. tank installed inside pump house as per specification No. FF-FFA/ACT DSR 13-8-15

ITEM NO.232 Supplying & installing gun metal gate valve of size 25mm dia as per specification No. FF-VL/GV DSR 13-7-25

ITEM NO. 233 Supplying and installing gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification No. FF-VL/HV DSR 13-7-27

ITEM NO.234 Supplying and installing cast iron double flange sluice valve 75/80 mm dia.as per specification No. FF-VL/SV DSR 13-7-9

ITEM NO. 235 Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour. DSR 13-8-22

ITEM NO.236 Supply Stainless steel landing valve single head dia. 3mm (Type A) ISI marked IS 5290 complete in all respects brand Lifeguard DSR 13-8-25

ITEM NO.237 Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 mm x 736mm x 736 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour. DSR 13-8-23

ITEM NO.238 Supplying & erecting vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 150 mm dia having following features 1) Visual Switch Activation 2) Rugged Switch Assembly 3) Heavy Duty Alluminium pipe Saddles 4) Durable Metal Encloser 5) Steel U Bolts For Secure Mounting 6) Two SPDT ( Single Pole Double Track ) Synchronised Switches 7) Serviceable Without Draining Pipes DSR 13-12-3

ITEM NO.239 Supplying and erecting 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction as per specification No. FF-SPR DSR 13-12-1

a) Pendent type Sprinkler

ITEM NO.240 Supplying and erecting 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 79º C fixed temperature rating with deflector disc of conventional construction as per specification No. FF-SPR (KITCHEN) DSR 13-12-1

a) Pendent type Sprinkler

ITEM NO.241 Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 32m high pressure polypropylene (Polyhose) long fitted with necessary accessories complete as per specification No. FF-FFA/HV DSR 13-8-3

ITEM NO.242 Providing and fixing gun metal ball valves confirming to IS 1703 with threaded/flanged joints complete with nuts, bolts, gaskets etc. MR

25mm Screwed ends

ITEM NO.243 Providing and fixing standard firemans axe with heavy rubber handle. MR

ITEM NO.244 Supplying G.M. branch pipe of 63 mm Ø fitted with 20 mm Ø detachable hexagonal nozzle as per specification No. FFFFA/NZ DSR 13-8-10

ITEM NO.245 Supplying fire fighting R.R.L. Hose pipe, 63mm dia,15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL DSR 13-8-6

ITEM NO.246 Supplying and erecting one no. Brass orifice plate having 6 mm. thickness, 140 mm outer dia of 140 mm at every single outlet hydrant valve as per specification No. FF-FFA/OP DSR 13-8-19

ITEM NO.247 Providing and fixing installation control valve with turbine type automatic Alarm Gong to be connected with control valve, drain & test valve and all other necessary compononts as per manufacturet s specif cations complete as requireD. NON DSR

150mm dia

FIRE FIGHTING PIPES

ITEM NO.248 Supplying and installing G.I.pipe above ground of ‘C’ class ERW with necessary fittings as per specification no. FF-PP

a)200mm dia DSR 13-6-7

b)150mm dia DSR 13-6-6

c)100mm dia DSR 13-6-5

d)80mm dia DSR 13-6-4

b)65mm dia MR

c)50mm dia DSR 13-6-3

d)40mm dia MR

c)32mm dia MR

d)25mm dia DSR 13-6-2

ITEM NO.249 Providing coating of Bitumen Paint & 4mm thick Wrapping as per IS 10221 for underground 150 mm Ring Main of Fire Fighting System. DSR 13-6-9

FIRE EXTINGUISHER

ITEM NO.250 Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall. DSR 10-2-39

FIRE BUCKETS

ITEM NO.251 Providing Round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook. DSR 10-2-24

ITEM NO.252 Supply, installation, testing and commissioning of Diesel Engine driven fire pump suitable for automatic operation comprising of the following and conforming to BS 649/IS 10002 all amended upto date.

Horizontal split casing multistage, centrifugal fire hydrant & sprinkler pump, suitable for automatic operation consisting horizontal, split casing, high pressure multistage, multioutlet, centrifugal pump. multioutlet, centrifugal pump. Including pump inlet & outlet 2nos butterfly valve , 1 no strainer, 1no Nrv & double flanged flexicon rubber expansion joint suitable for system test pressure . It shall have C.I. casing, CS diffusers, bronze impeller and C.S.Shaft with mechanical seal, Also to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. The pump should be tested for bench mark at factory and shall be gotten approved by the Local fire Authority.Design and drawing to be provided by the Contractor .Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head.Heat exchanger cooled (secondary cooling) diesel engine of speed 1500 RPM suitable for the above pump with automatic starting mechanism and other accessories including fuel tank (fabricated from 3mm MS sheet, painted with two coats of synthetic enamel paint over a coat of primer) of capacity adequate to sustain pump operation for 8 hours continuous working. The tank shall be fitted with Magnetic oil level indicator, MH with cover, drain valve, air vent including structural supports (painted with approved shade), 2 Nos. x 12 volt battery, heat exchanger with necessary piping connections & fittings, flexible coupling, coupling guard & exhaust pipe connection complete as required. NON DSR

FLOW RATE- 2280 LPM

ITEM NO.253 Supplying and installing, testing, perfect aligning and proper leveling and commissioning of fire service main pump, multistage, of 2400 LPM (Litres/min.) at 88m head centrifugal type, 75 HP, (55 kW) or of suitable HP as per specification No. FF-MFP/MSC DSR 13-2-1

FLOW RATE- 2280 LPM (Hydrant & Sprinkler)

ITEM NO.254 Supplying installing, testing, commissioning of Jockey Pump of 180 LPM at 88 m head, 3 ph. 440 A.C.15 HP, (11 kW) or of suitable HP with suitable Stages as per specification No. FFMFP/JP DSR 13-4-1

FLOW RATE- 180 LPM

ITEM NO.255 Supplying & Installing cast iron double flange butterfly valve of size 200 mm dia. as per specification No. FF-VL/BFV DSR 13-7-16

ITEM NO.256 Supplying and installing 150 mm dia end line strainer for +ve suction as per specification No. FF-VL/ELS DSR 13-7-7

ITEM NO.257 Supplying and installing 75/80 mm dia end line strainer for +ve suction as per specification No. FF-VL/ELS DSR 13-7-5

ITEM NO.258 Supplying and installing double flange NRV of size 200 mm dia as per specification No. FF-VL/NRV DSR 13-7-22

ITEM NO.259 Supplying and installing double flange NRV of size 150 mm dia as per specification No. FF-VL/NRV DSR 13-7-20

ITEM NO.260 Supplying and installing double flange NRV of size 75/80 mm dia as per specification No. FF-VL/NRV DSR 13-7-17

ITEM NO.261 Supplying & Installing cast iron double flange butterfly valve of size 150 mm dia. as per specification No. FF-VL/BFV DSR 13-7-15

ITEM NO.262 Supplying & Installing cast iron double flange butterfly valve of size 75/80 mm dia. As per specification No. FF-VL/BFV DSR 13-7-13

ITEM NO.263 Air Realesed Valve (ARV) Supplying and erecting 20/25 mm dia gun metal air realesed cock with neccesory GI coupling to be fitted on top FF/FFA/ARV DSR 3-8-16

ITEM NO.264 Supplying and installing DANFOSS make pressure switch with 12/15 mm Ø isolation valve, G.I. nipple, elbow etc. in an approved manner as per specification No. FF-FFA/PS DSR 13-8-18

ITEM NO.265 Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc. as per requirement in an approved manner as per specification No. FF-FFA/PG DSR 13-8-17

ELECTRICAL PANEL (FIRE PUMP PANEL)

STARTRERS

ITEM NO. 266 Supplying and erecting fully Automatic star/delta starter suitable for 12.5 H.P. to 15 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. (similar to L & T make MK-1 FASD model.) DSR 12-5-4

ITEM NO. 267 Supplying and erecting fully Automatic star/delta starter suitable for 75H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle MR

WIRES/ CABLES

ITEM NO.268 Supplying, erecting & terminating PVC armoured cable 4 core 6 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU DSR 7-2-10

ITEM NO.269 Supplying, erecting & terminating PVC armoured cable 3½ core 70 sq mm aluminium conductor with continuous 8.35 sq mm (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL DSR 7-1-20