PROVN OF HARDSTANDING WITH COVERED ROOF/ SHED FOR PARKING OF MT VEHS IN ZONE L, ADDN/ ALTN OF BLDG NO P-287(COOK HOUSE) OF SATA BTY IN ZONE N AND PROVN OF 04 X DEEP FREEZER 400 LTRS FOR OR COOK HOUSE OF FD REGT AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Dismantling timber boarding of any description fixed in any position

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down chowkat with shutter/without taking off shutter from the frame n exe 1.50 Sqm each

Taking down shutters of any description n.exc 1 sq.m each

Taking down cement plaster on brick concrete surfaces including racking out joints hacking for key, scrubbing down with, water etc.

Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises.

Hacking out old broken glass ( any thickness, sizes, quality or description) from wooden frames or glazed with putty or fixed with beads.

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for providing 75 mm thick cement concrete type C-2, 1:3:6 using (40 mm graded stone aggregate) as in path or paveway finished rough without using extra cement complete all as specified and directed.

M&L PCC 25 mm thick type B-1, 1:2:4 ( 20mm graded stone aggregate) as in floor as per leveling course all as specified and directed.

M&L for 10mm dia and over mild steel TMT bars cut to length bent to shapes as required including bending cranking and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

All as per item No. 11 above but 5 mm to 10 mm dia as in Stirrups, spaces & binders complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc.

M&L for reinforced cement concrete type (Nominal Mix) 1:2:4 type B1 using 20mm graded stone aggregate as in slab supported in walls, beams, cantilivers, bressummers, lintils over 11.5m Span all as specified and directed.

Material and labour for brick work with locally available sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.

Material & Labour 15 mm thick screed bed or bedding layer of mortar in cm 1:4 for laying floor tiles complete all as specified and directed.

Material & Labour 10mm thick Rendering to wall in cm (1:4) complete all as specified and directed.

Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match.

Material & Labour glazed ceramic coloured tiles 300 x 200 x 7 mm thick on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match.

M&L machine cut kota stone slab flooring 20 mm thick over screed base including cutting & polishing etc complete

All as per item No. 20 above but as in dado/skirting, riser etc to be cutting required size.

M&L for 15 mm thick rendering in CM 1:4 on fair faces brick work or concrete surfaces mixed with water proofing compound (WPC shall be measured and paid seperately)

Supply of Liquid water proofing compound : ( as per manufacturers & Instructions).

M & L for preparation of new plastered surfaces by applying two coats of cement base paint over a coat of primer.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded .

All as per item No. 25 above but without glazing bars .

M&L mild steelwork such as grills, guard bars etc and similar work conforming to Fe290 GDE E-165

Cutting holes in to brick wall for inserting hold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brick.

S & F 4 mm thick sheet glass ordinary quality & glazing with oil putty in squares n exe 0.5 sqm in each pane

S & F 3mm thick sheet glass ordinary quality & glazing with oil putty in squares n exe 0.5 sqm in each pane

S&F 35mm thick 2nd class hard wood skeleton shutter open rebated & prepared to receive glass, gauge etc (with out sash bars) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc

Supply and fix stainless steel wire cloth 0.36 cloth nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and and as directed.

M&L for two coats of synthetic enamel paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces.

S&F 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides

M & L preparation of new wooden surfaces with two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth.

S&F 125mm size MS butt hinges, medium weight cold rolled mild steel.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodised.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section.

S&F Mild steel sliding door bolts of size 300mm length of bolt, plate type, stove enamelled black with bright bolt not less than 12 mm dia with nad including a minimum of 6 bolts and nuts, four on bolt plate & two on staple plate.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F 2nd class Hard wood 20 mm thick boarding planed both side with butt joints fixed with nails in any situation.

S&F 15mm bore stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F CP bib cock long nose of 15 mm dia with wall flange and aerator.

S&F 15mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors.

All as per item No.45 above but 20mm bore

Surface excavation soft/loos soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out

M&L for brocken brick Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L for 50mm thick PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 38mm width Glass dividing strip of 3mm thick used in PCC floor,all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft and loose soil all as specified and as directed.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conferming to Fe-410 W(gde E 250 QLTY-B all as specified and as directed.

M&L for PCC (1:3:6)type C-2 (using 40mm graded stone aggregates for fixing post in ground,all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

E&M works

Supply, installation, commissioning of Glass Top Deep Freezer single phase 240 volt, 50 Hz,size of 400 Ltrs.Easy sliding door,corrosion resistant body,tropicalised for high ambient temprature,high density PUF insulation 100mm thick for better holding time,highly energy-efficient compressor with CFC free (Eco friendly)refrigerant. Adequate illumination inside the chamber.Temprature range-18 degreeC to -22 degreeC. Safety alarm system to cut off the supply in caase of temprature undershoot. Automatic defrost system maintaining the temprature with in variation of 5 degree .3 to 5 star rated. Complete all as specified and directed Make : Blue star CAT No GT400 or equivalent make of Haier/Godreg as approved by AGE (I).

M&L for point wiring with 4 Sqmm multistrandedc copper conductor 1100 volts grade FR PVC insulated unsheathed cable with proper colour coding drawn in PVC casing caping with FR PVC 4.0 Sqmm multistranded unsheatheed copper wire for continious earth, sunk in cast iron/MS terminal box 2.8 mm thick duly painted with aluminium inside and antocorrosive paint out side including connecting earth for 3 pin socked outlet, 15 Amps , independent board inclusing making good to the disturbed surface all as spd and directed by Engr-in- charge. Note: (a) Wiring shall be done by using colour coding. (b) Earth wire shall be of green colour (c) After completion of all wiring diagram of internal circuit with inventory shall be produced by cotractor duly sign by user to Engr -in-charge.

S&F Switch socket combination 2 in 1 3 pin, 15Amp flush type universal

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity of 5 to 32 Amps the MCB DB complete with connection testing and commissioning

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details.

SHRI CHANDAN CHANDA

M/S UTTAM GANGULY ENTERPRISE

SUMAN DEB

M/S SWAPAN DEBNATH

SHRI RAJESH DEY

M/s Amrit Gope