Repair/Maintenance of certain OTM Accn of 253 Med Regt under AGE B/R-ll of GE Dehradun.

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Material and labour for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 ,complete all as specified and directed.

Material and labour for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar1:4, complete all as specified and directed.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc., complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth without using extra cement ,complete all as specified and as directed by Engr-in-Charge.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

Material and labour for rendering 10mm thick in cement mortar 1:3 on fair faces of concrete work even and smooth without using extra cement as in ceiling, complete all as specified and directed.

Material and labour for preparing new plastered surface on walls with two coat of distmper oil emulsion white or tined over a coat of 1- 1.50 mm thick wall care putty on walls, complete all as specified and directed by Engr in charge.

Material and labour for preparation of newly plastered surface of ceiling and applying three coat of white wash, complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer, complete all as specified and directed.

Material and labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 7-8 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

Material and labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 7-8 mm thick in dado/skrting, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick cement plaster 1:4 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises , complete all as specified and directed.

Material and labour for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x600mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6-7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing tiling complete all as specified and directed.

Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

Supply and fix for granite stone 20mm thick of any type (table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like in 15mm thick cement mortar 1:4 incl pointing in white cement complete all as specified and directed.

Material and labour for 20 to 22mm thick for Machine cut kota stone slab flooring in one colour over 20 mm thick over CM 1:4 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed

Material and labour for vitrified ceramic coloured tiles 8-9 mm thick dark shed (square/rectangular) polished area of each tiles not exceeding 0.72 sqm, in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

All as per item No 18 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Taking down chowkat with shutter n. exc 1.5 Sqm each complete all as specified and as directed by Engr-in-Charge.

Taking down chowkat with shutter exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and as directed by Engr-in-Charge.

Taking down shutters of any description exc 1 sqm n.exc 2 sqm each, complete all as specified and directed.

Supply and fix for Pressed steel door frame of size 105 x 60 mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.[(Note: frame filled in cement concrete1:2:4 type B0 (12.5 mm graded stone aggregate)].

Supply and fix for Pressed steel door frame of size 125 x 60 mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.[(Note: frame filled in cement concrete1:2:4 type B0 (12.5 mm graded stone aggregate)].

Supply and fix for 30mm thick flush shutters, solid core construction, designer with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings, complete all as specified and directed.

Supply and fix for 30mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge, complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

Supply and fix factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete without glazing bars, dovetailed or welded including taking down old window, complete all as specified and directed.

Supply and fix factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old window, complete all as specified and directed.

Supply and fix Stainless steel 304 grade wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle ,complete all as specified and directed.

Supply and fix in repairs Stainless steel 304 grade wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle, complete all as specified and directed.

Supply and fix mild steel Framed work such as grills, gratings , Iron Chowkhats etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work mild steel conforming toFe 290. Gde-E-165 ,complete all as specified and directed by Engr-in-Charge.

Material and labour for two coat of synthetic enamel paint over a coat of primer including preparation on new steel surfaces of any description over 10 cm width or girth complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces including preparation, exc 10 cm width or girth, complete all as specified and directed.

Supply and fix PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

Supply and fix Factory Made Solid PVC Moulded Door Shutter, 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as shown in SSR Part – II 2010 and as directed by GE/Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed, complete all as specified and directed.

Supply and fix 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed ,complete all as specified and directed.

All as per item No 37 here-in-before but frosted glass complete all as specified and directed.

Dismantling block board/ boarding of any description and in any position complete including iron mongries , complete all as specified and directed.

Supply & fix 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive ,complete all as specified and directed by the Engineer-in-Charge.

Supply & fix 18 mm thick PVC board both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive ,complete all as specified and directed by the Engineer-in-Charge.

Supply & fix 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, salvent cement/ adhessive , complete all as per specifications & directed by Engr-in-Charge.

Supply and fix for magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

Supply and fix for Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) ,complete all as specified as directed.

Supply and fix mild steel powder coated barrel tower bolts 150 mm long one piece and fixed, complete all as specified and directed.

Supply and fix mild steel powder coated barrel tower bolts 200 mm long one piece and fixed , complete all as specified and directed.

Supply and fix stainless steel handles 150 mm long one piece and fixed with screws/welded to frame , complete all as specified and directed.

Supply and fix mild steel powder coated butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame , complete all as specified and directed.

Supply and fix 300 mm long mild steel powder coated l sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified and directed.

Supply and fix in repair peg set of five pegs stainless steel fixed on CP steel plate 304 grade including fixing screw as per approved sample.

Supply and fix in repairs glass corner shelf suitable size made of 5mm thick toughned glass complete all as specified and directed.

Supply & fix in repair glass shelf assembly consisting of 5 mm thick toughened glass with CP railing and brass brackets of size 500x125 mm, complete all as specified and directed.

Supply & fix in repair of aluminium body door cill at bottom part of door to stop entry of insect inside the room not less than 90 cm, complete all as specified and as directed.

Supply and fix in repair 25 mm dia stainless steel polished 304 grade drapery rod 1mm thick with final decorative, including brackets, decorative finished at both ends, complete all as specified and directed as per approved sample.

Supply and fix in repairs CP brass Soap dish 6 inches, complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 25 mm bore GI tubing complete all as specified and directed.

Material and labour cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed.

Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed.

Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed.

Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 25 mm bore GI tubing complete all as specified and directed.

Supply and fix in repair ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 15mm/20 mm bore iron pipe and fixed ( minimum weight 20mm -210 gms), complete all as specified and directed.

Supply and fix in repair CP toilet paper holder complete all as specified and as approved by Engr-in-Charge.

Supply and fix in repair CP brass wall mixer with Telephonic shower, complete all as specified and direcated.

Supply and fix in repair CP brass Central hole basin mixer fancy type 15mm dia complete all as specified and directed.

Supply and fix in repair PVC Health Faucet with 1 mtr metalic Expandable tube & hook, complete all as specified and directed and approved by Engr-in-Charge.

Supply & fix in repair vitreous china wash down water closet Pedestal pattern white (excluding flushing cistern and flush pipe) with CI 'P' or 'S; trap including plastic white seat cover, CP Jet spray with 1.0 mtr long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all specified and directed.

Supply and fix in repairs PVC low level flushing cistern 10 ltr capacity including flush pipe complete all as specified and directed.

Supply and fix in repair PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed.

Supply and fix in repair CP bib tap fancy type cast copper alloy 15 mm bore screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair fancy type concealed stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 20mm dia iron pipe complete all as specified and directed.

Supply and fix in repairs CP brass fancy type Angle cock 15mm dia ISI mark complete all as specified and directed.

Supply and fix in repair Brass CP shower rose 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

Supply and fix in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including 100mm CI 'P' trap including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed.

Supply and fix in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall / laid in trenches or in floors complete all as specified and directed.

Supply and fix in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall / laid in trenches complete all as specified and directed.

Supply and fix PVC (SWR) bend 110 mm dia, any radius with oval access door complete all as specified and directed.

Supply and fix PVC (SWR) bend 75 mm dia, any radius with oval access door complete all as specified and directed.

Supply and fix PVC (SWR) branch pieces 75 mm bore single (equal or unequal) with oval access door complete all as specified and directed.

Supply and fix PVC(SWR) branch pieces 110 mm bore single (equal or unequal) with oval access door complete all as specified and directed.

Supply and fix PVC nahani trap of 75mm bore, with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Supply and fix waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including 32mm PVC waste pipe for WHB complete all as specified and directed.

Supply and fix in repair CP steel Grating round with steel frame with hinge 100mm dia complete all as specified and directed.

Material and labour for taking down existing roof treatment of felt etc any thickness or description including cleaning all upto roof slab incluing removing spoil form site and Material and labour for providing roof treatment as per the following steps :- i) Filling cracks of roof slab with approved chemical sealing compound and applying 15mm thick renedering in CM 1:4 over neat cement slurry @ 3.00 Kg/Sqm over cleaned roof surface with use of approved water proofing compoung. ii) Applying a coat of cold applied bituminous primer @ 0.30 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minium weight 3.60 Kg/Sqm reinforced with plyester non-woven fabric (weight not less than 150 gms/Sqm) manufactured by M/s STP Ltd or M/s Texsa India Ltd, laid as per the manufacturers instruction with side over lap of 75mm and end over lap of 100mm and finally finished with super silver sheild @ 0.10 Ltr/Sqm. Note : The work of water proofing treatment shall be got executed thorugh manufacturer or their authorised applicator only.

Supply and fix in repair aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat Frame:- 101.60x44.45x3.00 mm Shutter verticle style :- 85x44.45x3.00mm shutter middle Rail :- 83.50x44.45x3.00mm Shutter Top Rail and bottom Rail :- 114.30x44.45x3.00mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Supply and fix in repair powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 83 x 44.45 x 3.00 mm including 5 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc including dismantling of exixting structure, complete all as specified and directed. Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Supply and fix in repair aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc ,complete all as specified and directed. Shutter Top & bottom size : 37.50x15x3.00mm Shutter inner lock size 37.50x15x3.00 mm Shutter side (Handle) size 37.50x15x3.00 mm Chowkhat bottom size : 50.30x26x3.00mm Chowkhat top & sides size: 50.30x26x3.00mm . Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Taking out old damaged SGSW pipes from existing lines including necessary excavation in trenches and getting out in any type of soil alongwith supply, laying and jointing of new SGSW pipe type 'A' 150mm dia in any length including packing under and haunching against the sides of pipes in PCC 1:4:8 type D-2 (using 40 mm graded aggregate) and returning, filling in disposal of surplus soil to a distance n.exc 50m, complete all as specified and directed by the Engr-in-Charge..

Removing the manholes covers and de-sluding /de-watering of septic tank and soakage well of any size and depth by mechanical pumping by plugging inlet as requried,and making the septic tank and soak well fully functional to the entire satisfaction of Engr-In-Charge including carrying the effluent out of MD land using 5000 ltr capacity sewage tanker and re-instating the manholes cover to its original postion ,complete all as specified and directed by Engr-In Charge.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level, complete all as specified and as directed.

Material and labour 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in flooring, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour factory made prepolished rubber moulded vibromatic Chequred cement concrete tiles 30cmx30cmx22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and colour pigment to matc over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate), 75 mm thick as in sub base complete all as specified and as directed.

Material and labour heavy duty endura ceramic coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed by the Engr-in-Charge.

Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Dismantling of wrouth iron or mild steel work of any descrption not otherwise provideed for complete all as specified and directed

Supply and fix for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel,tubular or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc, complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ,complete all as specified and as directed.

Supply & Fix in repair Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes with Urinal partitions slabs terminating about 40cm above floor line and grating as specified and directed.

Supply and fix in repairs Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

Supply and fixed pillar taps, 15mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe & fixed complete all as specified and directed.

Material and labour for Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltr complete all as specified and directed.

All as per serial item No 107 here-in-before but capacity of water tanks exc 500 ltr and not exc 1000 ltr complete all as specified and directed.

Supply & fix rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including dismantling & taking down existing old u/s tank and removing from site complete all as specified and directed.

Supply & fix rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including dismantling & taking down existing old u/s tank and removing from site complete all as specified and directed.

Supply and fix in repairs Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore , complete all as specified and directed.

Material and labour for complete removal of existing treatment on ceiling and applying three coats of white wash on ceiling, off sets, pillar etc complete all as directed and specified.

Material and labour for complete removal of existing treatment of walls including corners and applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over applying of 1-1.5 mm thick wall care putty finish wall surface even and smooth,complete all as specified and directed.

Material and labour for complete removal of existing treatment of walls including corners and applying two coats of distemper oil emulsion over applying of 1-1.5 mm thick wall care putty finish wall surface even & smooth all as specified and directed.

Material and Labour for complete removal of existing treatment of walls including corners and applying two coats of cement based paint of finish wall surface even and smooth, complete all as specified and directed.

Material and labour for one coat of white wash on old surfaces of walls including preparatin of surface, complete all as specified and directed by Egnr-in-Charge.

Material and labour one coat of cement base paint on old surfaces of walls including preparatin of surfaces, complete all as specified and directed by Egnr-in-Charge.

Preparation of old Steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint including preparation of surface,complete all as specified and directed

Material and labour preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint including preparation of surface complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as directed. Note :- (i) The contractor/Supervisor collect the complaints from the JE/MCM through JOB Card and rectify the complaints. (ii) The contractor/Supervisor should submit the Job Card duly signed by the user. (iii) RAR/Final bill will be paid only after verifying of workdone by the Engr-in-Charge

Material and labour for point wiring with 3 runs of 1.5 Sqmm (colour code as per IE Rules) FRLS, PVC insulated, unsheathed, single core, 1100 Volts grade, multistranded copper conductor cable/Wire in and including concealed rigid PVC conduit medium grade and green wire connected to common earth dolly, and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch .

All as per Item No 121 here-in- before but one 3 pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 121 here-in- before but one 3 pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 121 here-in- before but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 121 here-in- before but One light point controlled with switch 2 way complete all as specified.

All as per Item No 121 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulated FRLS copper conductor complete all as specified and directed.

All as per Item No 121 here-in- before but wiring drawing through Surface PVC conduit complete all as specified and directed.

All as per Item No 127 here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 127 here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 127 here-in- before but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 127 here-in- before but One light point controlled with switch 2 way complete all as specified.

All as per Item No 127 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulated FRLS copper conductor complete all as specified and directed.

All as per Item No 121 here-in- before but wiring drawing through exisitng conduit complete all as specified and directed.

All as per Item No 133 here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 133 here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 133 here-in- before but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 133 here-in- before but one two way point controlled with switch 2 way complete all as specified.

All as per Item No 133 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulate FRLS copper conductor complete all as specified and directed.

All as per Item No 121 here-in- before but wiring drawing through Case & Caping complete all as specified and directed.

All as per Item No 139 here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 139 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 139 mentioned here-in- before but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 139 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 4 sq mm PVC insulated FRLS copper conductor complete all as specified and directed.

Supply and fix in repair Switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix in repair Switch piano flush type single pole two way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix in repair Socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete all as specified and directed.

Supply and fix in repair bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

SSupply and fix in repair Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed.

Supply and fix in repair switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and directed.

Supply and fix in repair anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix in repair stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fix in repair ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fix in repair calling bell type AC 230 Volt single pole complete all as specified and directed..

Supply and fix Modular white cover plate with frame and metal flush box 2 module complete all as specified and as directed.

All as per item No 154 here in before but 3 module complete all as specified and directed.

All as per item No 154 here in before but 4 module complete all as specified and directed.

All as per item No 154 here in before but 6 module complete all as specified and directed.

All as per item No 154 here in before but 8 module complete all as specified and directed.

All as per item No 154 here in before but 12 module complete all as specified and directed.

Supply and fix in repair Modular switch 1 way 06 amp single pole complete all as specified and directed.

Supply and fix Modular switch 2 way 06 amp single pole complete all as specified and directed..

Supply and fix in repair Modular switch 1 way 16 amp single pole complete all as specified and directed..

Supply and fix in repair modular socket outlet 6/16A- 5 pin combined of 02 module complete all as specified and directed.

Supply and fix in repair modular socket outlet 6A-5 pin combined of 02 module complete all as specified and directed.

Supply and fix in repair moduar bell push 6 Amp 1 module complete all as specified and directed.

Supply and fix in repair modular fan step regulator 120 W-2 module complete all as specified and directed.

Supply and fix in repair LED tube light fitting batten type all in one single phase 18/20 W with lamp 6500/4000 K complete pre-wired all accessories complete all as specified and directed.

Supply and fix in repair mirror light decorative compact luminaries with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair decorative wall mounting light fitting made out of polycarbonated suitable for and incl retrofit 9 watts LED bulb complete all as specified and directed.

Supply and fix LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete. Note: The unit rate include for painting to bracket with one coat of red oxide paint and two coat of alluminium paint before fixing.

Material and labour for submain wiring with 3 runs(N+P+E) of 1.5 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 15 mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note:-3 runs of 1.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

All as per item No 171 here-in-before but with 3 runs(N+P+E) of 2.5 Sqmm single core copper FRLS conductor . Note:-3 runs of 2.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length complete all as specified and directed.

All as per item No 171 here-in-before but with 3 runs(N+P+E) of 4 Sqmm single core copper FRLS conductor .Note:-3 runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length complete all as specified and directed.

All as per item No 171 here-in-before but with 6 runs(3 runs P+N+ 2 run Earth) of 6 Sqmm single core copper FRLS conductor and PVC conduit not less than 24 mm dia. Note:-6 runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length complete all as specified and directed.

Material and labour for replacement of old rusted sunken box with new 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories and making the good disturbed surface with plastering and white washing etc incl taking down complete all as specified and directed .

Material and labour for replacement of old u/s hylum sheet cover fixed with brass screw complete with all accessories and making the good disturbed surface with plastering and white washing etc incl taking down complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair Distribution board VTPN 4 Way double door, suitable for MCCB 63/100 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete. Note:- DB and MCCB/MCB shall be of same make

Supply and fix in repair MCCB 415 Volts, 63 Amps, rating 4 Pole , complete all as specified and directed.

Supply and fix in repair MCCB 415 Volts, 100 Amps, rating 4 Pole complete all as specified and directed.

Supply and fix in repair Distribution board SPN 8 Way double door, for mounting MCBs isolator, IP 43 protection complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make

Supply and fix in replacement MCB combo box with steel enclosure with one single pole MCB 20 Amp 10 KA C series suitable for AC/geyser etc complete all as specrified & directed.

Supply and fix in repair 415V 10KA 'C' curve MCB of TPN 40 to 100 Amps complete all as specified and directed.

Supply and fix in repair SP 6 to 32 Amps rating 240V, 10KA 'C' curve MCB complete all as specified and directed.

Supply and fix in repair SPN 25 to 63 Amps rating 240V, 10KA 'C' curve MCB complete all as specified and directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

Supply and fix in repair round shaped LED downlights of capacity 12 Watt suitable for fixing in false ceiling with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair round shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 12 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair LED luminaire 600 mm x 600 mm, 35/36 watt, (Whit/warm white as per user equirement )220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

ANANYA CONSTRUCTION CO.

Alankar Traders

IMPERIAL ENGINEERS

Asian Builder

PAWAN KUMAR

AYUSH CONSTRUCTION COMPANY

R K BUILDERS