Construction of Additional Room and Lavatory at Nayabat Office Poshker Budgam.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of stone soling in trenches hand packed all inclusive leads, lifts, loading, unloading, head load, ramming/ dressing and carriage of materials from approved nearest sources to site of work complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 40 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all levels Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platforms.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand),extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 35mm imported wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Imported wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm imported wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing of ISI marked M.S Fittings of approved make and brand as per directins of Engineer in Charge.

Handles 150mm

Handles 100mm

Aldrop 150mm

T Bolts 150mm

T Bolts 100mm

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/ 10sqm

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including all fixtures,cost of screws, bolts,all carriages etc. complete using Popular wood

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2.

Providing and fixing plained eaves boarding. 250x32 mm (nominal size )

Providing and fixing of 10mm ply in soffit and gables incl. framework (popular wood 2"x2"), applying primer ,paint and beading.

Providing and fixing of lighting point incl. wiring for lighting points in 1.5 Sqm PVC insulated Copper wire & 2.5 Sqm PVC insulated multi strand copper wire for lighting sub mains 6 Amp one way switch, 2mm thick PVC conduit/ channel with bends, junction boxes etc, 6 Amp S Pole MCB, 10 AMP DP MCB, 2 way DB for housing MCB and Hylem Sheet with wooden box recessed in walls with accessories. Complete job

Providing and fixing of Fan point incl. wiring for fan points in 2.5 Sqm PVC insulated Multi Strand copper wire & 4 Sqm PVC inculated multi strand copper wire for heating sub mains, 16 Amp switch socket combined, 2mm thick PVC conduit/ Channel with bends, junction boxes etc, 10 Amp S Pole MCB, 2 way DB for housing MCB and Hylem sheet with wooden box recessed in walls with accessories. Complete job

Providing and fixing of heating point incl. wiring for heating points in 2.5 Sqm PVC insulated Multi Strand copper wire & 4 Sqm PVC inculated multi strand copper wire for heating sub mains, 16 Amp switch socket combined, 2mm thick PVC conduit/ Channel with bends, junction boxes etc, 10 Amp S Pole MCB, 2 way DB for housing MCB and Hylem sheet with wooden box recessed in walls with accessories. Complete job

Carriage of materials by MT incl. loading,unloading,etc complete job.

Stone Aggregate below 40mm for an avg. lead of 15 km

Sand for an avg. lead of 50 km

Bricks for an avg. lead of 25 km